capitan_asco Posted October 12, 2018 Share #26 Posted October 12, 2018 - Outcome of the installation/update: UNSUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 + JUN'S LOADER v1.03b - DS3615xs ---> to DSM version 6.2.1-23824 + JUN'S LOADER v1.03b - DS3615xs - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP ProLiant Microserver Gen8 - Additional comments: Blame me for not reading. I just read the previous comment Quote Link to comment Share on other sites More sharing options...
Hostilian Posted October 12, 2018 Share #27 Posted October 12, 2018 - Outcome of the installation: SUCCESSFUL - DSM version prior update: None.. This is a fresh install on 6.2.1 (23824) - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASUS H87-i PLUS with i3 CPU.. - Additional comments: Test install, on a spare disk, before trying an upgrade.. To my surprise the onboard AND add-in (4 port Intel) cards all work great. Even LACP bonded without an issue. Looking good. Not sure whether to try an upgrade - from the existing 6.1.7 u1 install on the same hardware, but different set of disks - or wait until it's out of Beta. Quote Link to comment Share on other sites More sharing options...
pippobimbo Posted October 13, 2018 Share #28 Posted October 13, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM - HP Microserver GEN 8 - esxi 6.7 - Additional comments: NIC: e1000 changed to e1000e Quote Link to comment Share on other sites More sharing options...
Архип Posted October 13, 2018 Share #29 Posted October 13, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 2 - Loader version and model: JUN'S LOADER v1.02a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - DMI: To Be Filled By O.E.M./N3150DC-ITX, BIOS P1.40 12/15/2015 - Additional comments: Intel NIC -ok Realtek- fault [Sat Oct 13 22:43:05 2018] r8168: Unknown symbol pci_disable_link_state (err 0) 1 Quote Link to comment Share on other sites More sharing options...
Goldddd Posted October 14, 2018 Share #30 Posted October 14, 2018 - Outcome of the installation/update: UNSUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: VM - Dell R720 - esxi 6.7 - Additional comments: None Quote Link to comment Share on other sites More sharing options...
Yesluv Posted October 14, 2018 Share #31 Posted October 14, 2018 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver GEN 8 - Additional comments: On-board NIC no longer works after this update. Had to throw in a 4-port PCIe NIC (Intel Corporation I350 Gigabit Network Connection) 2 Quote Link to comment Share on other sites More sharing options...
Altaram Posted October 14, 2018 Share #32 Posted October 14, 2018 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte ga-h97n-wifi - Additional comments: On-board NIC Atheros no longer works after this update. On-board NIC Intel works OK. Quote Link to comment Share on other sites More sharing options...
Dark Zydor Posted October 14, 2018 Share #33 Posted October 14, 2018 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03a - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Additional comments: Did not work with onboard NIC. Following comments on this topic, I bought a intel NIC added it, stopped DSM, disabled the onboard NIC. Update was applied successfully then. Quote Link to comment Share on other sites More sharing options...
jeromim Posted October 14, 2018 Share #34 Posted October 14, 2018 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.02b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Dell Optiplex 9020 - Additional comments: None Quote Link to comment Share on other sites More sharing options...
azebou31 Posted October 14, 2018 Share #35 Posted October 14, 2018 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus P8H61-I (intel I3) - Additional comments: None 1 Quote Link to comment Share on other sites More sharing options...
fastbone Posted October 15, 2018 Share #36 Posted October 15, 2018 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM - ESXi 6.7 - Additional comments: Network Interface need to be changed to E1000e Quote Link to comment Share on other sites More sharing options...
Juice Posted October 15, 2018 Share #37 Posted October 15, 2018 - Outcome of the installation/update: UNSUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Elite 7200 i5 (NIC 82579LM) - Additional comments: No Network, but NIC 82567LF work fine Quote Link to comment Share on other sites More sharing options...
Huberer Posted October 16, 2018 Share #38 Posted October 16, 2018 (edited) Outcome of the installation/update: SUCCESSFUL DSM version prior update: fresh installation Loader version and model: JUN'S LOADER v1.03a2 - DS918+ Using custom extra.lzma: NO Installation type: BAREMETAL - Asrock H110M-ITX, Intel Pentium G4600 (Kaby Lake), 8GB Ram Additional comments: only original SN used Edited October 22, 2018 by Polanskiman Comment removed. Quote Link to comment Share on other sites More sharing options...
hpk Posted October 17, 2018 Share #39 Posted October 17, 2018 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: Fresh Installation - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM - ESXi 6.7 Update1 - Additional comments: Network Interface need to be changed to E1000e Quote Link to comment Share on other sites More sharing options...
Herrnobiz Posted October 17, 2018 Share #40 Posted October 17, 2018 - Outcome of the installation/update: UNSUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Terramaster F2-420 - Additional comments: Lan is dual Realtek (lspci reports 10ec:8168 rev 07 therefore a 8168f) Quote Link to comment Share on other sites More sharing options...
kazuni Posted October 18, 2018 Share #41 Posted October 18, 2018 - Outcome of the installation: SUCCESSFUL - DSM version prior update: None.. This is a fresh install on 6.2.1 (23824) - Loader version and model: JUN'S LOADER v1.03a - DS918+ - Using custom extra.lzma: NO - Installation type: VM - VMware ESXi 6.7u1 Oct 16 release on Optiplex 7020 (8 Core/8GB RAM) - Additional comments: Must use E1000E as NIC, VMXNET3 no longer works. Must use 50mb vmdk lead disk as SATA 0:0 Second and above vmdk must sit in SATA0:1~11 (12 disk config) I used a proper set of SN/MAC, don't know if this affects the installation or not. 1 Quote Link to comment Share on other sites More sharing options...
kazuni Posted October 18, 2018 Share #42 Posted October 18, 2018 - Outcome of the installation: SUCCESSFUL - DSM version prior update: None. This is a fresh install on 6.2.1 (23824) - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - QNAP TS-853A, 16GB RAM - Additional comments: All 4 NIC works OOTB - I used a proper set of SN/MAC, don't know if this affects the installation or not. Quote Link to comment Share on other sites More sharing options...
amanx Posted October 18, 2018 Share #43 Posted October 18, 2018 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - W-B250 from taobao (link: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.37f02e8d1Ge3Zv&id=573141435687&_u=i2qem6r130df) - CPU: i7 7700T Quote Link to comment Share on other sites More sharing options...
Prinz_Protato Posted October 18, 2018 Share #44 Posted October 18, 2018 - Outcome of the installation: UNSUCCESSFUL - DSM version prior update: Update from 6.2 update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: VM - VMWare Workstation 12 Pro - Additional comments: Bootloader works, but can't access the WebGUI. On-board Intel NIC doesn't seem to get an IP Address Quote Link to comment Share on other sites More sharing options...
Vileserver Posted October 19, 2018 Share #45 Posted October 19, 2018 (edited) - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: None (fresh install) - Loader version and model: Jun's loader v1.03b - DS3617xs - Using custom extra.lzma: No - Installation type: Baremetal - ASRock E3C236D2I (Intel C236), 5 6TB SATA disks - Additional comments: worked first time! 😊 Edited October 19, 2018 by Vileserver Quote Link to comment Share on other sites More sharing options...
Rooey Posted October 19, 2018 Share #46 Posted October 19, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 15284 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Oracle/Sun Ultra 24 - Additional comments: Worked like a charm Quote Link to comment Share on other sites More sharing options...
jadehawk Posted October 20, 2018 Share #47 Posted October 20, 2018 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: FRESH INSTALL - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MEDIASMART EX485 - Additional comments: Did not show up in network, rebooting made no difference. Quote Link to comment Share on other sites More sharing options...
michel30 Posted October 20, 2018 Share #48 Posted October 20, 2018 Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM_DS3615xs_23739 - Loader version and model: Jun's loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Dell 790 - Additional comments: worked no problem at all Quote Link to comment Share on other sites More sharing options...
llxbr Posted October 20, 2018 Share #49 Posted October 20, 2018 Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 - Loader version and model: JUN'S LOADER v1.04b - DS918 - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock j5005-ITX - Additional comments: NONE Quote Link to comment Share on other sites More sharing options...
FiberInternetUser Posted October 20, 2018 Share #50 Posted October 20, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: Jun's LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: Baremetal, ASRock J3455-ITX motherboard - Additional comments: onboard NIC - Realtek RTL8111GR Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Posted by jun,
Reason for DSM 6.2.1 creating problem with Loader v1.03b
Recommended by Polanskiman
4 reactions
Go to this post
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.