DSM 5.x/6.x CPU name & cores infomation Change tool

[m_catalin 0]

15 hours ago, flyride said:

When I look at /proc/cpuinfo, I see an output block for each thread (core ID increments and core count is accurate with 4 cores).  You only have 1.  That would be alarming to me.

 

can you be more specific? i don't get it.

do you know a solution for this issue?

[flyride 448]

1 minute ago, m_catalin said:

can you be more specific? i don't get it.

do you know a solution for this issue?

 

Your concern is whether your processor cores are all active with DSM, and by the looks of /proc/cpuinfo, they are not.  My only thought is to ask if you are running a VM with processor restrictions?

[m_catalin 0]

no, is bare metal. is not virtual. On the old DSM it worked fine. my concern is the same, i don't know if it's using all 6 cores. 

[pucitylin 0]

Request help. After use, the resource monitor cannot be displayed normally, indicating that the network cannot be connected

[mervincm 12]

On 7/7/2020 at 2:00 PM, m_catalin said:

i don't know if it's using all 6 cores

if you want to see it graphically, install docker and netdata/netdata container. Here are my 8 cores.

 

 

 

[IG-88 649]

On 7/7/2020 at 10:00 PM, m_catalin said:

no, is bare metal. is not virtual. On the old DSM it worked fine. my concern is the same, i don't know if it's using all 6 cores. 

as long as it is within the limit of the kernel it will be used, these limits are predefined by synologys precompiled kernel that is used with xpenology (HT counts a cpu threat so if HT is available the core count needs to be doubled - thats the reason why its 8 for 3615, the original cpu had 4 cores with HT)

https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/

 

in your case there is no HT, just  6 cores and thats ok for all three available loader/images

[vrm42 2]

Hi,

 

on DSM 6.2.2 I got this:

sed: -e expression #1, char 40: unterminated `s' command
sed: -e expression #1, char 94: unterminated `s' command

 

Any idea?

Thanks!

[Der_Sparsame 0]

Hi,

 

on DSM 6.2.2 I got this:

sed: -e expression #1, char 40: unterminated `s' command
sed: -e expression #1, char 94: unterminated `s' command

 

Any idea?

Thanks!

 

Same Problem here on HPE Proliant Gen10 with AMD Opteron Processor.

[JasonDragon 0]

thanks FOXBI, your script mod works flawlessly even on latest DSM 6.2.3-25426-Update2. I ran the latest build with redo (2. option) and it fixed the undefined issue. Happy.

Edited December 14, 2020 by JasonDragon

[mortisboy 0]

I confirm @FOXBI your script works perfect (1. option) on latest update, many thanks!

[Vodka2014 6]

Hi @FOXBI

 

Thanks for this and to everyone else that has helped :).

 

I am seeing so many different files on here what is the correct one to use for DSM 6.2.3-25426 Update 3 Please.

 

Thanks again

[sestriel 0]

Thank u @FOXBI! Your Script works perfectly.

[Vodka2014 6]

Hi @sestriel

 

What one did you use please ?

[Vodka2014 6]

It is WORKING

 

 

Thanks again @FOXBI

Edited December 23, 2020 by Vodka2014

[kevinmce 0]

Works on baremetal install, script version: 2.2.1-r01. 

 

Needed to chmod 777 the file once extracted, then it ran and selected option 1, no issues. 

 

My Hardware:

ASUSTEK - 90MB10N0-M0EAY0  - PRIME B365M-A 

INTEL - BX80684I59400  - CORE I5-9400 

KINGSTON - HX424C15FB3/8  - HyperX FURY - DDR4 - module - 8 GB

SEAGATE - ST6000VN001  - IRONWOLF 6TB

 

Edited December 26, 2020 by kevinmce

[TNa681 3]

Hi and Happy New Year.

 

Tried it but failed. Does anybody know why and how to solve it?

 

 

[KatsO 4]

В 01.01.2021 в 19:17, TNa681 сказал:

Hi and Happy New Year.

 

Tried it but failed. Does anybody know why and how to solve it?

 

 

You must do this over SSH on your DiskStation. After unpacking tar issue the command "chmod +x ch_cpuinfo"

[kevinmce 0]

Hi Guys, 

 

I know this question has been asked elsewhere, but seeing as this tool is somewhat related im wondering if the OP noticed any possible changes that could be made to fix bare metal xpenology installs not showing the correct CPU temperature?

 

Its a minor inconvenience but a noticeable one since i have my servers monitored by home assistant.

[TNa681 3]

6 hours ago, KatsO said:

You must do this over SSH on your DiskStation. After unpacking tar issue the command "chmod +x ch_cpuinfo"

 

PERFECT, thanks a lot for pushing...

[jancoler 0]

Hi all

 i can run this script.

But when i select option 1 there is a message :

There is a history of running the same version please select option 2 i have done this many times.

Every time i have the same message.

Any tip Please help

Thank you

DSM CPU Information Change Tool ver. 2.2.1-r01 - made by FOXBI

Your version of DSM is DSM 6.2.3-25426 Update 3  continue...

1) First run  2) Redo  3) Restore - Select Number : 1

There is a history of running the same version. Please run again select 2) redo                                                                                         .

root@JANCOLER:/volume1/homes#
 

[jancoler 0]

Hi All,

 

Thank you FOXBI,

 

[jancoler 0]

2 minutes ago, jancoler said:

Hi All,

 

Thank you FOXBI,