traianstc Posted August 8, 2018 Share #1 Posted August 8, 2018 Hi, I have some problems with xpenology instalation. Hardware: FUJITSU Server PRIMERGY RX1330 M1 CPU: E3-1220v3 Mainboard type D3229 Chipset Intel® C226 Baremetal instalation. I tryed: Bootloader 1.02b and 1.03b, DS3615 and DS3617, DSM 6.1.4 and 6.2 (I know that last one doesn't work yet). Boot UEFI and Legacy. USB 3.0 port and USB 2.0 port. Different usb sticks, one who is working just fine with Hp Microserver gen8 Server. Raid 0 one every disk, i just wanted to see if it's working. The final config will be something else... I have this problem: Installation ERROR - The file is probably corrupt. (13) https://xpenology.com/forum/topic/9853-dsm_ds3617xs-installation-error-the-file-is-probably-corrupt-13/ Link to comment Share on other sites More sharing options...
0 Olegin Posted August 8, 2018 Share #2 Posted August 8, 2018 Change vid/pid for your flash drive in grub.cfg Link to comment Share on other sites More sharing options...
1 Dfds Posted August 8, 2018 Share #3 Posted August 8, 2018 1 hour ago, traianstc said: I never modified anything when i installed xpenology to microserver gen8, i don't use quickconnect. And it worked everytime. I repeat, the same usb stick with bootloader 1.02b who is working perfect in microserver gen8, i doesn't work with fujitsu server.. I thought modifying vin/pid is only a requirement for functionality of quickconnect. Setting the correct vid/pid of the USB stick has nothing to do with quickconnect. It will however resolve the error 13 issue you're having. Link to comment Share on other sites More sharing options...
0 bajwha Posted August 8, 2018 Share #4 Posted August 8, 2018 Hi, I am having the same issue but after following the instruction on how to create USB from link = I cannot see grub.cfg. here is how my USB look like now. Link to comment Share on other sites More sharing options...
0 Olegin Posted August 8, 2018 Share #5 Posted August 8, 2018 Use osfmount to mount 0 partition in win. Link to comment Share on other sites More sharing options...
0 traianstc Posted August 8, 2018 Author Share #6 Posted August 8, 2018 3 hours ago, Olegin said: Change vid/pid for your flash drive in grub.cfg I never modified anything when i installed xpenology to microserver gen8, i don't use quickconnect. And it worked everytime. I repeat, the same usb stick with bootloader 1.02b who is working perfect in microserver gen8, i doesn't work with fujitsu server.. I thought modifying vin/pid is only a requirement for functionality of quickconnect. Link to comment Share on other sites More sharing options...
0 Olegin Posted August 8, 2018 Share #7 Posted August 8, 2018 No, only to protect writing on usb drive with loader by dsm installation. Link to comment Share on other sites More sharing options...
0 Polanskiman Posted August 9, 2018 Share #8 Posted August 9, 2018 8 hours ago, traianstc said: I never modified anything when i installed xpenology to microserver gen8, i don't use quickconnect. And it worked everytime. I repeat, the same usb stick with bootloader 1.02b who is working perfect in microserver gen8, i doesn't work with fujitsu server.. I thought modifying vin/pid is only a requirement for functionality of quickconnect. I advise you to read the FAQs. It is all clearly explained there. Link to comment Share on other sites More sharing options...
0 traianstc Posted August 14, 2018 Author Share #9 Posted August 14, 2018 It was the vid/pid of the USB stick problem... Thanks! Link to comment Share on other sites More sharing options...
0 Polanskiman Posted August 14, 2018 Share #10 Posted August 14, 2018 The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic. Link to comment Share on other sites More sharing options...
Question
traianstc
Hi, I have some problems with xpenology instalation.
Hardware: FUJITSU Server PRIMERGY RX1330 M1
CPU: E3-1220v3
Mainboard type D3229 Chipset Intel® C226
Baremetal instalation.
I tryed:
Bootloader 1.02b and 1.03b, DS3615 and DS3617, DSM 6.1.4 and 6.2 (I know that last one doesn't work yet).
Boot UEFI and Legacy.
USB 3.0 port and USB 2.0 port.
Different usb sticks, one who is working just fine with Hp Microserver gen8 Server.
Raid 0 one every disk, i just wanted to see if it's working. The final config will be something else...
I have this problem:
Installation ERROR - The file is probably corrupt. (13)
https://xpenology.com/forum/topic/9853-dsm_ds3617xs-installation-error-the-file-is-probably-corrupt-13/
Link to comment
Share on other sites
9 answers to this question
Recommended Posts