NoFate

surveillance : use license from a real system on 3615

Recommended Posts

hi,

 

i have a real ds1512 , so an actual valid SN, not connected/registered on synology

if i buy original surveillance licenses, can i i use it on the 3615xs ? if i change the SNl offcourse

 

any1 already tried that ?

 

thnx

Share this post


Link to post
Share on other sites

If you have a real synology why not use that, I would have thought a DS1512 would be more than adequate to run the latest version on surveillance station.

Share this post


Link to post
Share on other sites

No one will guarantee what you want to do will work. Keep in mind that using serials and keys on a machine that is not supposed to be running DSM is already a breach of the UELA so it is difficult to tell you if it will work or not. What I can tell you is that Synology will eventually figure out at some point that the DS1512 serial is being used on a machine that is not a DS1512. I will leave it to that and let you make your own decisions :) 

Share this post


Link to post
Share on other sites

I don't need garanty ;)

 

Just wanted to know if someone already done this? Wanted to know if Synology checks product number on activation, if not , I am going to buy a license....  If Synology eventually is going to disactiave it later, then I loose some money ;)

Share this post


Link to post
Share on other sites

Personally I would not invest in buying any services provided by Synology on an XPEnology. But that is just me.

Share this post


Link to post
Share on other sites

well, its only like 50€ for 1 camera , its worth it :)

we will see what new functions will come with the surveiiilance station, i still prefer to use it, since its a good system

Share this post


Link to post
Share on other sites
4 hours ago, NoFate said:

well, its only like 50€ for 1 camera , its worth it :)

we will see what new functions will come with the surveiiilance station, i still prefer to use it, since its a good system

when you install XPEnology, you already get 2 camera licenses for free :)

So only when you want to put a 3rd camera in Surveillance station, you need a license!

Share this post


Link to post
Share on other sites

yes, also tested that on esxi

with the CMS SYNC, you can manage eveything from 1 synology , lifeview/settings/recordings , verry easy to setup 

Share this post


Link to post
Share on other sites
On 8/25/2018 at 3:26 PM, Mas Ganteng said:

@NoFate : PM me. I have the solution

 

 

If your solution involves illegally promoting a cracked SS app I strongly suggest you read the rules and guidelines. If not then you are welcome to share your solution in the forum publicly.

Share this post


Link to post
Share on other sites

Has anyone been able to figure this out? I have a camera license since I have a few IP Cams and 2 licenses that come with the DS3617 Xpenology isnt enough. I purchased an additional license and want to use it, but when I try to add it, it states "Connection failed. Please check your network settings"

Share this post


Link to post
Share on other sites

You need to give an real Mac/sn to your xpeonology, did you do that already?

Share this post


Link to post
Share on other sites
2 minutes ago, NoFate said:

You need to give an real Mac/sn to your xpeonology, did you do that already?

I have not, how/where would I go to do this?

Share this post


Link to post
Share on other sites

Please search on this forum how to change the sn/Mac ,you need to change some files

 

But then still,my original question, will the license work on a xpeonology with a real sn/Mac... Seems no one tried it yet

Share this post


Link to post
Share on other sites
13 minutes ago, NoFate said:

Please search on this forum how to change the sn/Mac ,you need to change some files

 

But then still,my original question, will the license work on a xpeonology with a real sn/Mac... Seems no one tried it yet

So I found something where you can change the MAC/SN but it is required to do so before installation. I have already installed. Is there a way to get this changed after it has already been installed or will I need to reinstall because the instructions mentioned the use of a USB stick which I did not use since I am installing this on a QNAP machine. I do have a Syno system as well and would also like to know if I can just use the MAC of that machine (DS1817+), but not sure how to change the SN either way.

Share this post


Link to post
Share on other sites

I have taken a real SN and MAC from old physical Synology box and set it up on virtual 3615xs Synology.

Stil not able to activate legally purchased camera license. Still the "Connection failed. Please check your network settings" error.

 

 

Share this post


Link to post
Share on other sites
19 minutes ago, ryerye said:

I have taken a real SN and MAC from old physical Synology box and set it up on virtual 3615xs Synology.

Stil not able to activate legally purchased camera license. Still the "Connection failed. Please check your network settings" error.

 

 

Same here. I've tried the same last week with no luck.

If you take a 3615xs SN / MAC from a real physical box and put it on the XPEnology 3615xs, then it might work, but if the models dont match up, it wont work apparently.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now