jun

DSM 6.2 Loader

Recommended Posts

On 3/22/2019 at 6:32 PM, sadycus said:

@le.pipo007
No, there is no need to change the CPU if you use the DS3615xs loader. 

👍

MANY MANY MANY thanks sadycus

yesterday i have receive my network card from amazon, i plug it into my microserver gen8, disabled integrated network, and i have update successfully from dsm 6.1 to 6.2.1 U6 ! 

PERFECT !

 

just a little problem, HP-AMS no more working

 

ash-4.3# /sbin/amsHelper -I0 -M1,5,14,16,18,23,99
This program requires the host to have a HP Integrated Lights Out 4 (iLO 4) BMC
 

i have ilo firmware 2.61 (the last one)

 

Does anyone have success use hp-AMS on DSM 6.2.1 u6?

Regards.

Share this post


Link to post
Share on other sites

Does anyone know how to make it that the grub menu always boots to the baremetal build option and not anything else? I am unable to reboot the NAS box remotely as when it reboots it will try and run a different option in the GRUB menu.

Share this post


Link to post
Share on other sites

i think you can comment all other entries leaving only the option you want.

Share this post


Link to post
Share on other sites
28 minutes ago, Restiphani said:

Does anyone know how to make it that the grub menu always boots to the baremetal build option and not anything else? I am unable to reboot the NAS box remotely as when it reboots it will try and run a different option in the GRUB menu.

You can either comment out or delete the unwanted entries.

Share this post


Link to post
Share on other sites
15 hours ago, Restiphani said:

Does anyone know how to make it that the grub menu always boots to the baremetal build option and not anything else? I am unable to reboot the NAS box remotely as when it reboots it will try and run a different option in the GRUB menu.

That is odd. Normally the loader remembers the last option that was selected.

 

11 hours ago, Restiphani said:

How do you comment it out or delete it?

Commenting out code means rendering the code inactive. In this case adding a hash sign (#) in front of the unwanted line(s) will render the code inert.

Deleting simply means deleting the unwanted entry (code). Not sure how to say it otherwise.

 

I recommend commenting out rather than deleting in case you want to revert.

Share this post


Link to post
Share on other sites

I guess I should have been more specific. I understand how to delete or comment out with a #. My question is where would I do that? When I hit e to edit the grub menu items to do that I can put the # in or delete the data but there is no way to save that edit.

Share this post


Link to post
Share on other sites

you have 2 options

 

- mount your loader like you did first time, edit grub and comment the entries you dont want, reflash pen drive and boot like a new instalation;

- the second option is editing on running machine:

 

access your mounted path, edit grub and comment out the line you dont want.

 

Share this post


Link to post
Share on other sites
On 2/21/2019 at 3:34 PM, AndreyATGB said:

There’s your problem. DS918+ is Haswell or newer, you can’t use it with your CPU. 

 

Tried two separate real SN/MACs on my 1220v3, 3 different USBs with correct vid/pid without success, error 13. Not sure about the minimum haswell recommendation around here but it didn't work on mine 

Share this post


Link to post
Share on other sites
4 часа назад, Black6spdZ сказал:

Tried two separate real SN/MACs on my 1220v3, 3 different USBs with correct vid/pid without success, error 13.

Error 13 occurs in most cases if you specify VID/PID incorrectly. Probably forgot to specify 0x before them.

Share this post


Link to post
Share on other sites

Hi All

 

I recently built a new Xpenology NAS using the following HW:

 

Supermicro A2SDi-H-TF mini itx motherboard that has an intel atom SOC C3758 cpu

Intel SOC C3000 integrated 2 10gbe copper ports X553

SOC controller for 12 sata ports, 4 x sata3 and 2 x mini-sas

8gb ecc ram

Intel optane 800p m2 nvme

Unas 810 case modified to house icy dock 4 bay ssd unit

Seasonic 250W 1U psu

2 x 500gb ssd

2 x 1000gb ssd

8 x 4tb 3.5"

 

I have been using Xpenology as my NAS OS for 5 yrs and am acustomed to installing it bare metal on HP microservers and also ESXi VM.

 

I decided to try ds918+ as I want to use caching. I am using a samsung usb 3 fit drive for boot.

 

The install gets to Jun's happy hacking message but the nic does not get IP and the NAS cannot be found on the network either by web finder or synology tool.

 

Variations I have tried:

 

ds3615 loader 103b

ds3617 loader 103b

ds918+ loader 3a plus extra.izma found on the forum

ds918+ loader 104b

ds3615 loader 102b

 

I have disabled c states in bios and have also tried a usb 2 toshiba thumb drive.

 

In each and every case the result is the same, happy hacking message and then nothing further, no network.

 

I have managed to succesfully install latest freenas (this was my alternate OS) and verified that all my NAS HW workss correctly, so I don't have a fault with my HW or usb drive as it all works in freenas.

 

I never had any issues on microserver and am at a loss as to why I cannot get a network as the intel igbe driver supports my nic and is available in expenology standard extra.izma according to this forum.

 

Can anyone help?

Share this post


Link to post
Share on other sites

Hi all,

i need to pass the argument 'iommu=soft' to the kernel of my xpenlogy. Does anyone know where to insert that in the grub.cfg ?

 

TYA,

Simone.

 

Share this post


Link to post
Share on other sites
16 hours ago, Olegin said:

Error 13 occurs in most cases if you specify VID/PID incorrectly. Probably forgot to specify 0x before them.

Im 100% positive the 0x was in front and the vid/pid were correct on several usb sticks.. Notepad++ used as well

Share this post


Link to post
Share on other sites
8 часов назад, Black6spdZ сказал:

Im 100% positive the 0x was in front and the vid/pid were correct on several usb sticks.. Notepad++ used as well

Error 13 means that the DSM installator can't create or write to the system partition. May be some  troubles with hdd?

Share this post


Link to post
Share on other sites

Ok I have searched thru the threads and find that my motherboard should be fully supported according to IG-88 where he responded to a request to provide the nic driver. The actual nic chip is x557 (I got it wrong in my last post) and is part of the ixgbe.ko driver in IG-88's extra.izma which I have already tried.

 

So the only thing I can think of is a kernel panic is occuring, possibly related to the i915 driver maybe as my cpu has no integrated gpu, plus I am also booting in legacy mode so that the thumb drive will boot.

 

Can the i915 be disabled?

Share this post


Link to post
Share on other sites
On 4/25/2019 at 3:11 AM, Olegin said:

Error 13 means that the DSM installator can't create or write to the system partition. May be some  troubles with hdd?

Tried a couple different HDDs as well

Share this post


Link to post
Share on other sites
On 4/25/2019 at 12:39 PM, venno said:

Ok I have searched thru the threads and find that my motherboard should be fully supported according to IG-88 where he responded to a request to provide the nic driver. The actual nic chip is x557 (I got it wrong in my last post) and is part of the ixgbe.ko driver in IG-88's extra.izma which I have already tried.

 

So the only thing I can think of is a kernel panic is occuring, possibly related to the i915 driver maybe as my cpu has no integrated gpu, plus I am also booting in legacy mode so that the thumb drive will boot.

 

Can the i915 be disabled?

 

it's maybe a stretch to say I'm using a similar board (Supermicro AS2Di-4C-HLN4F: Intel SOC C3000, X553)

but I had to disable VT-d Interrupt remapping in the BIOS to get DS3615 loader 1.02b running (with the extra.lzma for X553).

 

No luck yet with any of the newer loaders though.

Share this post


Link to post
Share on other sites
Posted (edited)

I've just updated from 1.02b (3615) to 1.04b (918) and I'm having some huge problems.. I'm running on baremetal (AsrockRack e3c226d2i), I've installed the PAT for 6.2.2 and did a migration, everything starts fine, I can log into DSM, everything looks good but after a minute or so, all packages are stopping and I can't connect to dsm anymore.. Any ideas? Please help...

 

EDIT: I can still SSH to the server and some services still seem to be running, but no DSM  webfrontend and almost all packages are stopped

Edited by b1lou

Share this post


Link to post
Share on other sites

Strange things are happening here.. I just rebooted a couple of times and freed up some space in /dev/md0 and now everything seems to work.. Oh and I've also read about an old /.xpenoboot folder that causes problems, so I deleted and before the last reboot. But I'm still not sure if everything is fine now.. Here are the lines in dmesg after the last reboot:

 

 

Spoiler

[Sun Apr 28 16:39:22 2019] Initializing cgroup subsys cpuset
[Sun Apr 28 16:39:22 2019] Initializing cgroup subsys cpu
[Sun Apr 28 16:39:22 2019] Initializing cgroup subsys cpuacct
[Sun Apr 28 16:39:22 2019] Linux version 4.4.59+ (root@build3) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #24922 SMP PREEMPT Thu Mar 28 11:07:03 CST 2019
[Sun Apr 28 16:39:22 2019] Command line: syno_hdd_powerup_seq=1 HddHotplug=0 syno_hw_version=DS918+ vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_hdd_detect=0 syno_port_thaw=1 root=/dev/md0 sn=1130LWN029086 mac1=D050992DFB4E mac2=D050992DFB4F netif_num=2 vid=0x0781 pid=0x5571
[Sun Apr 28 16:39:22 2019] KERNEL supported cpus:
[Sun Apr 28 16:39:22 2019]   Intel GenuineIntel
[Sun Apr 28 16:39:22 2019] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[Sun Apr 28 16:39:22 2019] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[Sun Apr 28 16:39:22 2019] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[Sun Apr 28 16:39:22 2019] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[Sun Apr 28 16:39:22 2019] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[Sun Apr 28 16:39:22 2019] e820: BIOS-provided physical RAM map:
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x0000000000000100-0x000000000009d7ff] usable
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x0000000000100000-0x00000000ce001fff] usable
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000ce002000-0x00000000ce008fff] ACPI NVS
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000ce009000-0x00000000dd83cfff] usable
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000dd83d000-0x00000000dd8defff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000dd8df000-0x00000000dd8fffff] ACPI data
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000dd900000-0x00000000dda53fff] ACPI NVS
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000dda54000-0x00000000df7fefff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[Sun Apr 28 16:39:22 2019] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable
[Sun Apr 28 16:39:22 2019] NX (Execute Disable) protection: active
[Sun Apr 28 16:39:22 2019] SMBIOS 2.8 present.
[Sun Apr 28 16:39:22 2019] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./E3C226D2I, BIOS P3.30 06/04/2015
[Sun Apr 28 16:39:22 2019] Kernel/User page tables isolation: disabled
[Sun Apr 28 16:39:22 2019] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[Sun Apr 28 16:39:22 2019] e820: remove [mem 0x000a0000-0x000fffff] usable
[Sun Apr 28 16:39:22 2019] e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000
[Sun Apr 28 16:39:22 2019] MTRR default type: uncachable
[Sun Apr 28 16:39:22 2019] MTRR fixed ranges enabled:
[Sun Apr 28 16:39:22 2019]   00000-9FFFF write-back
[Sun Apr 28 16:39:22 2019]   A0000-BFFFF uncachable
[Sun Apr 28 16:39:22 2019]   C0000-C7FFF write-protect
[Sun Apr 28 16:39:22 2019]   C8000-E7FFF uncachable
[Sun Apr 28 16:39:22 2019]   E8000-FFFFF write-protect
[Sun Apr 28 16:39:22 2019] MTRR variable ranges enabled:
[Sun Apr 28 16:39:22 2019]   0 base 0000000000 mask 7C00000000 write-back
[Sun Apr 28 16:39:22 2019]   1 base 0400000000 mask 7FE0000000 write-back
[Sun Apr 28 16:39:22 2019]   2 base 00E0000000 mask 7FE0000000 uncachable
[Sun Apr 28 16:39:22 2019]   3 disabled
[Sun Apr 28 16:39:22 2019]   4 disabled
[Sun Apr 28 16:39:22 2019]   5 disabled
[Sun Apr 28 16:39:22 2019]   6 disabled
[Sun Apr 28 16:39:22 2019]   7 disabled
[Sun Apr 28 16:39:22 2019]   8 disabled
[Sun Apr 28 16:39:22 2019]   9 disabled
[Sun Apr 28 16:39:22 2019] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[Sun Apr 28 16:39:22 2019] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[Sun Apr 28 16:39:22 2019] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[Sun Apr 28 16:39:22 2019] Base memory trampoline at [ffff880000096000] 96000 size 28672
[Sun Apr 28 16:39:22 2019] Using GB pages for direct mapping
[Sun Apr 28 16:39:22 2019] BRK [0x01a01000, 0x01a01fff] PGTABLE
[Sun Apr 28 16:39:22 2019] BRK [0x01a02000, 0x01a02fff] PGTABLE
[Sun Apr 28 16:39:22 2019] BRK [0x01a03000, 0x01a03fff] PGTABLE
[Sun Apr 28 16:39:22 2019] BRK [0x01a04000, 0x01a04fff] PGTABLE
[Sun Apr 28 16:39:22 2019] BRK [0x01a05000, 0x01a05fff] PGTABLE
[Sun Apr 28 16:39:22 2019] BRK [0x01a06000, 0x01a06fff] PGTABLE
[Sun Apr 28 16:39:22 2019] RAMDISK: [mem 0x367c9000-0x37ffffff]
[Sun Apr 28 16:39:22 2019] ACPI: Early table checksum verification disabled
[Sun Apr 28 16:39:22 2019] ACPI: RSDP 0x00000000000F0540 000024 (v02 ALASKA)
[Sun Apr 28 16:39:22 2019] ACPI: XSDT 0x00000000DD8E50A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
[Sun Apr 28 16:39:22 2019] ACPI: FACP 0x00000000DD8F78C8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[Sun Apr 28 16:39:22 2019] ACPI: DSDT 0x00000000DD8E5200 0126C6 (v02 ALASKA A M I    00000321 INTL 20120711)
[Sun Apr 28 16:39:22 2019] ACPI: FACS 0x00000000DDA53F80 000040
[Sun Apr 28 16:39:22 2019] ACPI: APIC 0x00000000DD8F79D8 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[Sun Apr 28 16:39:22 2019] ACPI: FPDT 0x00000000DD8F7A70 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[Sun Apr 28 16:39:22 2019] ACPI: FIDT 0x00000000DD8F7AB8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[Sun Apr 28 16:39:22 2019] ACPI: SSDT 0x00000000DD8F7B58 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120711)
[Sun Apr 28 16:39:22 2019] ACPI: AAFT 0x00000000DD8F87D8 00003A (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[Sun Apr 28 16:39:22 2019] ACPI: SSDT 0x00000000DD8F8818 000539 (v02 PmRef  Cpu0Ist  00003000 INTL 20051117)
[Sun Apr 28 16:39:22 2019] ACPI: SSDT 0x00000000DD8F8D58 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20051117)
[Sun Apr 28 16:39:22 2019] ACPI: MCFG 0x00000000DD8F98D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[Sun Apr 28 16:39:22 2019] ACPI: PRAD 0x00000000DD8F9910 0000BE (v02 PRADID PRADTID  00000001 MSFT 03000001)
[Sun Apr 28 16:39:22 2019] ACPI: HPET 0x00000000DD8F99D0 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[Sun Apr 28 16:39:22 2019] ACPI: SSDT 0x00000000DD8F9A08 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[Sun Apr 28 16:39:22 2019] ACPI: SSDT 0x00000000DD8F9D78 005BB8 (v02 SaSsdt SaSsdt   00003000 INTL 20120711)
[Sun Apr 28 16:39:22 2019] ACPI: SPMI 0x00000000DD8FF930 000040 (v05 ALASKA A M I    00000000 AMI. 00000000)
[Sun Apr 28 16:39:22 2019] ACPI: UEFI 0x00000000DD8FF970 000042 (v01 ALASKA A M I    01072009      00000000)
[Sun Apr 28 16:39:22 2019] ACPI: SPCR 0x00000000DD8FF9B8 000050 (v01 A M I  APTIO4   01072009 AMI. 00000005)
[Sun Apr 28 16:39:22 2019] ACPI: DMAR 0x00000000DD8FFA08 000080 (v01 INTEL  BDW      00000001 INTL 00000001)
[Sun Apr 28 16:39:22 2019] ACPI: EINJ 0x00000000DD8FFA88 000130 (v01 AMI    AMI EINJ 00000000      00000000)
[Sun Apr 28 16:39:22 2019] ACPI: ERST 0x00000000DD8FFBB8 000230 (v01 AMIER  AMI ERST 00000000      00000000)
[Sun Apr 28 16:39:22 2019] ACPI: HEST 0x00000000DD8FFDE8 0000A8 (v01 AMI    AMI HEST 00000000      00000000)
[Sun Apr 28 16:39:22 2019] ACPI: BERT 0x00000000DD8FFE90 000030 (v01 AMI    AMI BERT 00000000      00000000)
[Sun Apr 28 16:39:22 2019] ACPI: Local APIC address 0xfee00000
[Sun Apr 28 16:39:22 2019] Zone ranges:
[Sun Apr 28 16:39:22 2019]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[Sun Apr 28 16:39:22 2019]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[Sun Apr 28 16:39:22 2019]   Normal   [mem 0x0000000100000000-0x000000041fffffff]
[Sun Apr 28 16:39:22 2019] Movable zone start for each node
[Sun Apr 28 16:39:22 2019] Early memory node ranges
[Sun Apr 28 16:39:22 2019]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[Sun Apr 28 16:39:22 2019]   node   0: [mem 0x0000000000100000-0x00000000ce001fff]
[Sun Apr 28 16:39:22 2019]   node   0: [mem 0x00000000ce009000-0x00000000dd83cfff]
[Sun Apr 28 16:39:22 2019]   node   0: [mem 0x00000000df7ff000-0x00000000df7fffff]
[Sun Apr 28 16:39:22 2019]   node   0: [mem 0x0000000100000000-0x000000041fffffff]
[Sun Apr 28 16:39:22 2019] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fffffff]
[Sun Apr 28 16:39:22 2019] On node 0 totalpages: 4184019
[Sun Apr 28 16:39:22 2019]   DMA zone: 64 pages used for memmap
[Sun Apr 28 16:39:22 2019]   DMA zone: 22 pages reserved
[Sun Apr 28 16:39:22 2019]   DMA zone: 3996 pages, LIFO batch:0
[Sun Apr 28 16:39:22 2019]   DMA32 zone: 14113 pages used for memmap
[Sun Apr 28 16:39:22 2019]   DMA32 zone: 903223 pages, LIFO batch:31
[Sun Apr 28 16:39:22 2019]   Normal zone: 51200 pages used for memmap
[Sun Apr 28 16:39:22 2019]   Normal zone: 3276800 pages, LIFO batch:31
[Sun Apr 28 16:39:22 2019] ACPI: PM-Timer IO Port: 0x1808
[Sun Apr 28 16:39:22 2019] ACPI: Local APIC address 0xfee00000
[Sun Apr 28 16:39:22 2019] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[Sun Apr 28 16:39:22 2019] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[Sun Apr 28 16:39:22 2019] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[Sun Apr 28 16:39:22 2019] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[Sun Apr 28 16:39:22 2019] ACPI: IRQ0 used by override.
[Sun Apr 28 16:39:22 2019] ACPI: IRQ9 used by override.
[Sun Apr 28 16:39:22 2019] Using ACPI (MADT) for SMP configuration information
[Sun Apr 28 16:39:22 2019] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[Sun Apr 28 16:39:22 2019] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xce002000-0xce008fff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xdd83d000-0xdd8defff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xdd8df000-0xdd8fffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xdd900000-0xdda53fff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xdda54000-0xdf7fefff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[Sun Apr 28 16:39:22 2019] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[Sun Apr 28 16:39:22 2019] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[Sun Apr 28 16:39:22 2019] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[Sun Apr 28 16:39:22 2019] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[Sun Apr 28 16:39:22 2019] PERCPU: Embedded 31 pages/cpu @ffff88041fc00000 s87448 r8192 d31336 u262144
[Sun Apr 28 16:39:22 2019] pcpu-alloc: s87448 r8192 d31336 u262144 alloc=1*2097152
[Sun Apr 28 16:39:22 2019] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[Sun Apr 28 16:39:22 2019] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4118620
[Sun Apr 28 16:39:22 2019] Kernel command line: syno_hdd_powerup_seq=1 HddHotplug=0 syno_hw_version=DS918+ vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_hdd_detect=0 syno_port_thaw=1 root=/dev/md0 sn=1130LWN029086 mac1=D050992DFB4E mac2=D050992DFB4F netif_num=2 vid=0x0781 pid=0x5571
[Sun Apr 28 16:39:22 2019] Power on seq num: 1
[Sun Apr 28 16:39:22 2019] Synology Hardware Version: DS918+
[Sun Apr 28 16:39:22 2019] Vender format version: 2
[Sun Apr 28 16:39:22 2019] SYNO GPIO hdd detect pin: 0
[Sun Apr 28 16:39:22 2019] Serial Number: 1130LWN029086
[Sun Apr 28 16:39:22 2019] Mac1: D050992DFB4E
[Sun Apr 28 16:39:22 2019] Mac2: D050992DFB4F
[Sun Apr 28 16:39:22 2019] Internal netif num: 2
[Sun Apr 28 16:39:22 2019] PID hash table entries: 4096 (order: 3, 32768 bytes)
[Sun Apr 28 16:39:22 2019] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[Sun Apr 28 16:39:22 2019] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[Sun Apr 28 16:39:22 2019] Memory: 16346992K/16736076K available (5561K kernel code, 475K rwdata, 1828K rodata, 852K init, 684K bss, 389084K reserved, 0K cma-reserved)
[Sun Apr 28 16:39:22 2019] Preemptible hierarchical RCU implementation.
[Sun Apr 28 16:39:22 2019]     Build-time adjustment of leaf fanout to 64.
[Sun Apr 28 16:39:22 2019] NR_IRQS:4352 nr_irqs:488 16
[Sun Apr 28 16:39:22 2019] Console: colour dummy device 80x25
[Sun Apr 28 16:39:22 2019] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[Sun Apr 28 16:39:22 2019] hpet clockevent registered
[Sun Apr 28 16:39:22 2019] tsc: Fast TSC calibration using PIT
[Sun Apr 28 16:39:22 2019] tsc: Detected 3491.923 MHz processor
[Sun Apr 28 16:39:22 2019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.84 BogoMIPS (lpj=3491923)
[Sun Apr 28 16:39:22 2019] pid_max: default: 32768 minimum: 301
[Sun Apr 28 16:39:22 2019] ACPI: Core revision 20150930
[Sun Apr 28 16:39:22 2019] ACPI: 6 ACPI AML tables successfully acquired and loaded
[Sun Apr 28 16:39:22 2019] Security Framework initialized
[Sun Apr 28 16:39:22 2019] AppArmor: AppArmor initialized
[Sun Apr 28 16:39:22 2019] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[Sun Apr 28 16:39:22 2019] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[Sun Apr 28 16:39:22 2019] Initializing cgroup subsys io
[Sun Apr 28 16:39:22 2019] Initializing cgroup subsys memory
[Sun Apr 28 16:39:22 2019] Initializing cgroup subsys devices
[Sun Apr 28 16:39:22 2019] Initializing cgroup subsys freezer
[Sun Apr 28 16:39:22 2019] CPU: Physical Processor ID: 0
[Sun Apr 28 16:39:22 2019] CPU: Processor Core ID: 0
[Sun Apr 28 16:39:22 2019] mce: CPU supports 9 MCE banks
[Sun Apr 28 16:39:22 2019] CPU0: Thermal monitoring enabled (TM1)
[Sun Apr 28 16:39:22 2019] process: using mwait in idle threads
[Sun Apr 28 16:39:22 2019] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[Sun Apr 28 16:39:22 2019] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[Sun Apr 28 16:39:22 2019] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
[Sun Apr 28 16:39:22 2019] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[Sun Apr 28 16:39:22 2019] Speculative Store Bypass: Vulnerable
[Sun Apr 28 16:39:22 2019] Freeing SMP alternatives memory: 28K (ffffffff8194d000 - ffffffff81954000)
[Sun Apr 28 16:39:22 2019] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[Sun Apr 28 16:39:22 2019] TSC deadline timer enabled
[Sun Apr 28 16:39:22 2019] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[Sun Apr 28 16:39:22 2019] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[Sun Apr 28 16:39:22 2019] ... version:                3
[Sun Apr 28 16:39:22 2019] ... bit width:              48
[Sun Apr 28 16:39:22 2019] ... generic registers:      4
[Sun Apr 28 16:39:22 2019] ... value mask:             0000ffffffffffff
[Sun Apr 28 16:39:22 2019] ... max period:             00007fffffffffff
[Sun Apr 28 16:39:22 2019] ... fixed-purpose events:   3
[Sun Apr 28 16:39:22 2019] ... event mask:             000000070000000f
[Sun Apr 28 16:39:22 2019] x86: Booting SMP configuration:
[Sun Apr 28 16:39:22 2019] .... node  #0, CPUs:      #1
[Sun Apr 28 16:39:22 2019] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[Sun Apr 28 16:39:22 2019] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[Sun Apr 28 16:39:22 2019] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Sun Apr 28 16:39:22 2019]  #2 #3 #4 #5 #6 #7
[Sun Apr 28 16:39:22 2019] x86: Booted up 1 node, 8 CPUs
[Sun Apr 28 16:39:22 2019] smpboot: Total of 8 processors activated (55870.76 BogoMIPS)
[Sun Apr 28 16:39:22 2019] devtmpfs: initialized
[Sun Apr 28 16:39:22 2019] PM: Registering ACPI NVS region [mem 0xce002000-0xce008fff] (28672 bytes)
[Sun Apr 28 16:39:22 2019] PM: Registering ACPI NVS region [mem 0xdd900000-0xdda53fff] (1392640 bytes)
[Sun Apr 28 16:39:22 2019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[Sun Apr 28 16:39:22 2019] futex hash table entries: 2048 (order: 5, 131072 bytes)
[Sun Apr 28 16:39:22 2019] xor: automatically using best checksumming function:
[Sun Apr 28 16:39:22 2019]    avx       : 51416.000 MB/sec
[Sun Apr 28 16:39:22 2019] pinctrl core: initialized pinctrl subsystem
[Sun Apr 28 16:39:22 2019] NET: Registered protocol family 16
[Sun Apr 28 16:39:22 2019] cpuidle: using governor ladder
[Sun Apr 28 16:39:22 2019] cpuidle: using governor menu
[Sun Apr 28 16:39:22 2019] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[Sun Apr 28 16:39:22 2019] ACPI: bus type PCI registered
[Sun Apr 28 16:39:22 2019] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[Sun Apr 28 16:39:22 2019] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[Sun Apr 28 16:39:22 2019] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[Sun Apr 28 16:39:22 2019] PCI: Using configuration type 1 for base access
[Sun Apr 28 16:39:22 2019] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[Sun Apr 28 16:39:22 2019] raid6: sse2x1   gen() 11613 MB/s
[Sun Apr 28 16:39:22 2019] raid6: sse2x1   xor()  9044 MB/s
[Sun Apr 28 16:39:22 2019] raid6: sse2x2   gen() 14113 MB/s
[Sun Apr 28 16:39:22 2019] raid6: sse2x2   xor()  9658 MB/s
[Sun Apr 28 16:39:22 2019] raid6: sse2x4   gen() 16011 MB/s
[Sun Apr 28 16:39:22 2019] raid6: sse2x4   xor() 11531 MB/s
[Sun Apr 28 16:39:22 2019] raid6: avx2x1   gen() 22878 MB/s
[Sun Apr 28 16:39:22 2019] raid6: avx2x2   gen() 25039 MB/s
[Sun Apr 28 16:39:22 2019] raid6: avx2x4   gen() 28785 MB/s
[Sun Apr 28 16:39:22 2019] raid6: using algorithm avx2x4 gen() 28785 MB/s
[Sun Apr 28 16:39:22 2019] raid6: using avx2x2 recovery algorithm
[Sun Apr 28 16:39:22 2019] ACPI: Added _OSI(Module Device)
[Sun Apr 28 16:39:22 2019] ACPI: Added _OSI(Processor Device)
[Sun Apr 28 16:39:22 2019] ACPI: Added _OSI(3.0 _SCP Extensions)
[Sun Apr 28 16:39:22 2019] ACPI: Added _OSI(Processor Aggregator Device)
[Sun Apr 28 16:39:22 2019] ACPI: Executed 6 blocks of module-level executable AML code
[Sun Apr 28 16:39:22 2019] ACPI: Dynamic OEM Table Load:
[Sun Apr 28 16:39:22 2019] ACPI: SSDT 0xFFFF88040D046400 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20051117)
[Sun Apr 28 16:39:22 2019] ACPI: Dynamic OEM Table Load:
[Sun Apr 28 16:39:22 2019] ACPI: SSDT 0xFFFF88040D369000 0005AA (v02 PmRef  ApIst    00003000 INTL 20051117)
[Sun Apr 28 16:39:22 2019] ACPI: Dynamic OEM Table Load:
[Sun Apr 28 16:39:22 2019] ACPI: SSDT 0xFFFF88040D36A600 000119 (v02 PmRef  ApCst    00003000 INTL 20051117)
[Sun Apr 28 16:39:22 2019] ACPI: Interpreter enabled
[Sun Apr 28 16:39:22 2019] ACPI: (supports S0 S4 S5)
[Sun Apr 28 16:39:22 2019] ACPI: Using IOAPIC for interrupt routing
[Sun Apr 28 16:39:22 2019] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Sun Apr 28 16:39:22 2019] ACPI: Power Resource [PG00] (on)
[Sun Apr 28 16:39:22 2019] ACPI: Power Resource [PG01] (on)
[Sun Apr 28 16:39:22 2019] ACPI: Power Resource [PG02] (on)
[Sun Apr 28 16:39:22 2019] ACPI: Power Resource [FN00] (off)
[Sun Apr 28 16:39:22 2019] ACPI: Power Resource [FN01] (off)
[Sun Apr 28 16:39:22 2019] ACPI: Power Resource [FN02] (off)
[Sun Apr 28 16:39:22 2019] ACPI: Power Resource [FN03] (off)
[Sun Apr 28 16:39:22 2019] ACPI: Power Resource [FN04] (off)
[Sun Apr 28 16:39:22 2019] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[Sun Apr 28 16:39:22 2019] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[Sun Apr 28 16:39:22 2019] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[Sun Apr 28 16:39:22 2019] PCI host bridge to bus 0000:00
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: root bus resource [bus 00-3e]
[Sun Apr 28 16:39:22 2019] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
[Sun Apr 28 16:39:22 2019] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[Sun Apr 28 16:39:22 2019] pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
[Sun Apr 28 16:39:22 2019] pci 0000:00:14.0: PME# supported from D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:14.0: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[Sun Apr 28 16:39:22 2019] pci 0000:00:16.0: reg 0x10: [mem 0xf7316000-0xf731600f 64bit]
[Sun Apr 28 16:39:22 2019] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000
[Sun Apr 28 16:39:22 2019] pci 0000:00:16.1: reg 0x10: [mem 0xf7315000-0xf731500f 64bit]
[Sun Apr 28 16:39:22 2019] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[Sun Apr 28 16:39:22 2019] pci 0000:00:1a.0: reg 0x10: [mem 0xf7313000-0xf73133ff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:1a.0: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0: Enabling MPC IRBNCE
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2: Enabling MPC IRBNCE
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3: Enabling MPC IRBNCE
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7: Enabling MPC IRBNCE
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[Sun Apr 28 16:39:22 2019] pci 0000:00:1d.0: reg 0x10: [mem 0xf7312000-0xf73123ff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:00:1d.0: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.2: reg 0x24: [mem 0xf7311000-0xf73117ff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.2: PME# supported from D3hot
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.3: reg 0x10: [mem 0xf7310000-0xf73100ff 64bit]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0: PCI bridge to [bus 01]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe01fffff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0:   bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[Sun Apr 28 16:39:22 2019] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[Sun Apr 28 16:39:22 2019] pci 0000:02:00.0: reg 0x10: [mem 0xf7200000-0xf727ffff]
[Sun Apr 28 16:39:22 2019] pci 0000:02:00.0: reg 0x18: [io  0xe000-0xe01f]
[Sun Apr 28 16:39:22 2019] pci 0000:02:00.0: reg 0x1c: [mem 0xf7280000-0xf7283fff]
[Sun Apr 28 16:39:22 2019] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:02:00.0: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2: PCI bridge to [bus 02]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf72fffff]
[Sun Apr 28 16:39:22 2019] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[Sun Apr 28 16:39:22 2019] pci 0000:03:00.0: reg 0x10: [mem 0xf7100000-0xf717ffff]
[Sun Apr 28 16:39:22 2019] pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd01f]
[Sun Apr 28 16:39:22 2019] pci 0000:03:00.0: reg 0x1c: [mem 0xf7180000-0xf7183fff]
[Sun Apr 28 16:39:22 2019] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:03:00.0: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3: PCI bridge to [bus 03]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3:   bridge window [mem 0xf7100000-0xf71fffff]
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0: [1a03:1150] type 01 class 0x060400
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0: supports D1 D2
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0: System wakeup disabled by ACPI
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7: PCI bridge to [bus 04-05]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7:   bridge window [mem 0xf6000000-0xf70fffff]
[Sun Apr 28 16:39:22 2019] pci 0000:05:00.0: [1a03:2000] type 00 class 0x030000
[Sun Apr 28 16:39:22 2019] pci 0000:05:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[Sun Apr 28 16:39:22 2019] pci 0000:05:00.0: reg 0x14: [mem 0xf7000000-0xf701ffff]
[Sun Apr 28 16:39:22 2019] pci 0000:05:00.0: reg 0x18: [io  0xc000-0xc07f]
[Sun Apr 28 16:39:22 2019] pci 0000:05:00.0: supports D1 D2
[Sun Apr 28 16:39:22 2019] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0: PCI bridge to [bus 05]
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0:   bridge window [io  0xc000-0xcfff]
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0:   bridge window [mem 0xf6000000-0xf70fffff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: on NUMA node 0
[Sun Apr 28 16:39:22 2019] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
[Sun Apr 28 16:39:22 2019] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
[Sun Apr 28 16:39:22 2019] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15), disabled.
[Sun Apr 28 16:39:22 2019] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
[Sun Apr 28 16:39:22 2019] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Sun Apr 28 16:39:22 2019] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Sun Apr 28 16:39:22 2019] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
[Sun Apr 28 16:39:22 2019] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Sun Apr 28 16:39:22 2019] ACPI: Enabled 7 GPEs in block 00 to 3F
[Sun Apr 28 16:39:22 2019] vgaarb: setting as boot device: PCI:0000:05:00.0
[Sun Apr 28 16:39:22 2019] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[Sun Apr 28 16:39:22 2019] vgaarb: loaded
[Sun Apr 28 16:39:22 2019] vgaarb: bridge control possible 0000:05:00.0
[Sun Apr 28 16:39:22 2019] SCSI subsystem initialized
[Sun Apr 28 16:39:22 2019] libata version 3.00 loaded.
[Sun Apr 28 16:39:22 2019] pps_core: LinuxPPS API ver. 1 registered
[Sun Apr 28 16:39:22 2019] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[Sun Apr 28 16:39:22 2019] PTP clock support registered
[Sun Apr 28 16:39:22 2019] PCI: Using ACPI for IRQ routing
[Sun Apr 28 16:39:22 2019] PCI: pci_cache_line_size set to 64 bytes
[Sun Apr 28 16:39:22 2019] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[Sun Apr 28 16:39:22 2019] e820: reserve RAM buffer [mem 0xce002000-0xcfffffff]
[Sun Apr 28 16:39:22 2019] e820: reserve RAM buffer [mem 0xdd83d000-0xdfffffff]
[Sun Apr 28 16:39:22 2019] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[Sun Apr 28 16:39:22 2019] clocksource: Switched to clocksource hpet
[Sun Apr 28 16:39:22 2019] AppArmor: AppArmor Filesystem Enabled
[Sun Apr 28 16:39:22 2019] pnp: PnP ACPI init
[Sun Apr 28 16:39:22 2019] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[Sun Apr 28 16:39:22 2019] system 00:01: [io  0x0800-0x087f] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[Sun Apr 28 16:39:22 2019] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[Sun Apr 28 16:39:22 2019] system 00:03: [io  0x1854-0x1857] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[Sun Apr 28 16:39:22 2019] system 00:04: [io  0x0290-0x029f] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[Sun Apr 28 16:39:22 2019] system 00:05: [io  0x0a00-0x0a1f] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[Sun Apr 28 16:39:22 2019] system 00:06: [io  0x04d0-0x04d1] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[Sun Apr 28 16:39:22 2019] pnp 00:07: [dma 0 disabled]
[Sun Apr 28 16:39:22 2019] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[Sun Apr 28 16:39:22 2019] pnp 00:08: [dma 0 disabled]
[Sun Apr 28 16:39:22 2019] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[Sun Apr 28 16:39:22 2019] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[Sun Apr 28 16:39:22 2019] pnp: PnP ACPI: found 10 devices
[Sun Apr 28 16:39:22 2019] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0: PCI bridge to [bus 01]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe01fffff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.0:   bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2: PCI bridge to [bus 02]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf72fffff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3: PCI bridge to [bus 03]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.3:   bridge window [mem 0xf7100000-0xf71fffff]
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0: PCI bridge to [bus 05]
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0:   bridge window [io  0xc000-0xcfff]
[Sun Apr 28 16:39:22 2019] pci 0000:04:00.0:   bridge window [mem 0xf6000000-0xf70fffff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7: PCI bridge to [bus 04-05]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[Sun Apr 28 16:39:22 2019] pci 0000:00:1c.7:   bridge window [mem 0xf6000000-0xf70fffff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000cbfff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 8 [mem 0x000cc000-0x000cffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000d3fff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:00: resource 15 [mem 0xe0000000-0xfeafffff window]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe01fffff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:01: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf72fffff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[Sun Apr 28 16:39:22 2019] pci_bus 0000:05: resource 1 [mem 0xf6000000-0xf70fffff]
[Sun Apr 28 16:39:22 2019] NET: Registered protocol family 2
[Sun Apr 28 16:39:22 2019] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[Sun Apr 28 16:39:22 2019] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[Sun Apr 28 16:39:22 2019] TCP: Hash tables configured (established 131072 bind 65536)
[Sun Apr 28 16:39:22 2019] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[Sun Apr 28 16:39:22 2019] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[Sun Apr 28 16:39:22 2019] NET: Registered protocol family 1
[Sun Apr 28 16:39:22 2019] RPC: Registered named UNIX socket transport module.
[Sun Apr 28 16:39:22 2019] RPC: Registered udp transport module.
[Sun Apr 28 16:39:22 2019] RPC: Registered tcp transport module.
[Sun Apr 28 16:39:22 2019] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sun Apr 28 16:39:22 2019] pci 0000:05:00.0: Video device with shadowed ROM
[Sun Apr 28 16:39:22 2019] PCI: CLS 64 bytes, default 64
[Sun Apr 28 16:39:22 2019] Trying to unpack rootfs image as initramfs...
[Sun Apr 28 16:39:22 2019] Freeing initrd memory: 24796K (ffff8800367c9000 - ffff880038000000)
[Sun Apr 28 16:39:22 2019] dtddtdscuu: module verification failed: signature and/or required key missing - tainting kernel
[Sun Apr 28 16:39:22 2019] DMAR: Host address width 39
[Sun Apr 28 16:39:22 2019] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[Sun Apr 28 16:39:22 2019] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[Sun Apr 28 16:39:22 2019] DMAR: RMRR base: 0x000000df6b6000 end: 0x000000df6c4fff
[Sun Apr 28 16:39:22 2019] DMAR: No ATSR found
[Sun Apr 28 16:39:22 2019] DMAR: dmar0: Using Queued invalidation
[Sun Apr 28 16:39:22 2019] DMAR: Setting RMRR:
[Sun Apr 28 16:39:22 2019] DMAR: Setting identity map for device 0000:00:14.0 [0xdf6b6000 - 0xdf6c4fff]
[Sun Apr 28 16:39:22 2019] DMAR: Setting identity map for device 0000:00:1a.0 [0xdf6b6000 - 0xdf6c4fff]
[Sun Apr 28 16:39:22 2019] DMAR: Setting identity map for device 0000:00:1d.0 [0xdf6b6000 - 0xdf6c4fff]
[Sun Apr 28 16:39:22 2019] DMAR: Prepare 0-16MiB unity mapping for LPC
[Sun Apr 28 16:39:22 2019] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[Sun Apr 28 16:39:22 2019] DMAR: Intel(R) Virtualization Technology for Directed I/O
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:00.0 to group 0
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:14.0 to group 1
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:16.0 to group 2
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:16.1 to group 2
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1a.0 to group 3
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1c.0 to group 4
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1c.2 to group 5
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1c.3 to group 6
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1c.7 to group 7
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1d.0 to group 8
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1f.0 to group 9
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1f.2 to group 9
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:00:1f.3 to group 9
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:02:00.0 to group 10
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:03:00.0 to group 11
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:04:00.0 to group 12
[Sun Apr 28 16:39:22 2019] iommu: Adding device 0000:05:00.0 to group 12
[Sun Apr 28 16:39:22 2019] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[Sun Apr 28 16:39:22 2019] hw unit of domain pp0-core 2^-14 Joules
[Sun Apr 28 16:39:22 2019] hw unit of domain package 2^-14 Joules
[Sun Apr 28 16:39:22 2019] hw unit of domain dram 2^-14 Joules
[Sun Apr 28 16:39:22 2019] hw unit of domain pp1-gpu 2^-14 Joules
[Sun Apr 28 16:39:22 2019] audit: initializing netlink subsys (disabled)
[Sun Apr 28 16:39:22 2019] audit: type=2000 audit(1556462362.557:1): initialized
[Sun Apr 28 16:39:22 2019] Initialise system trusted keyring
[Sun Apr 28 16:39:22 2019] VFS: Disk quotas dquot_6.6.0
[Sun Apr 28 16:39:22 2019] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Sun Apr 28 16:39:22 2019] NFS: Registering the id_resolver key type
[Sun Apr 28 16:39:22 2019] Key type id_resolver registered
[Sun Apr 28 16:39:22 2019] Key type id_legacy registered
[Sun Apr 28 16:39:22 2019] async_tx: api initialized (async)
[Sun Apr 28 16:39:22 2019] Key type asymmetric registered
[Sun Apr 28 16:39:22 2019] Asymmetric key parser 'x509' registered
[Sun Apr 28 16:39:22 2019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sun Apr 28 16:39:22 2019] io scheduler noop registered
[Sun Apr 28 16:39:22 2019] io scheduler deadline registered
[Sun Apr 28 16:39:22 2019] io scheduler cfq registered (default)
[Sun Apr 28 16:39:22 2019] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[Sun Apr 28 16:39:22 2019] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[Sun Apr 28 16:39:22 2019] console [ttyS0] enabled
[Sun Apr 28 16:39:22 2019] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 8250
[Sun Apr 28 16:39:22 2019] brd: module loaded
[Sun Apr 28 16:39:22 2019] Loading iSCSI transport class v2.0-870.
[Sun Apr 28 16:39:22 2019] ahci 0000:00:1f.2: version 3.0
[Sun Apr 28 16:39:22 2019] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[Sun Apr 28 16:39:22 2019] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[Sun Apr 28 16:39:22 2019] scsi host0: ahci
[Sun Apr 28 16:39:22 2019] scsi host1: ahci
[Sun Apr 28 16:39:22 2019] scsi host2: ahci
[Sun Apr 28 16:39:22 2019] scsi host3: ahci
[Sun Apr 28 16:39:22 2019] scsi host4: ahci
[Sun Apr 28 16:39:22 2019] scsi host5: ahci
[Sun Apr 28 16:39:22 2019] ata1: SATA max UDMA/133 abar m2048@0xf7311000 port 0xf7311100 irq 25
[Sun Apr 28 16:39:22 2019] ata2: SATA max UDMA/133 abar m2048@0xf7311000 port 0xf7311180 irq 25
[Sun Apr 28 16:39:22 2019] ata3: SATA max UDMA/133 abar m2048@0xf7311000 port 0xf7311200 irq 25
[Sun Apr 28 16:39:22 2019] ata4: SATA max UDMA/133 abar m2048@0xf7311000 port 0xf7311280 irq 25
[Sun Apr 28 16:39:22 2019] ata5: SATA max UDMA/133 abar m2048@0xf7311000 port 0xf7311300 irq 25
[Sun Apr 28 16:39:22 2019] ata6: SATA max UDMA/133 abar m2048@0xf7311000 port 0xf7311380 irq 25
[Sun Apr 28 16:39:23 2019] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Sun Apr 28 16:39:23 2019] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[Sun Apr 28 16:39:23 2019] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[Sun Apr 28 16:39:23 2019] ata1.00: SN:     WD-WCC4NJVDC24C
[Sun Apr 28 16:39:23 2019] ata1.00: configured for UDMA/133
[Sun Apr 28 16:39:23 2019] scsi 0:0:0:0: Direct-Access     WDC      WD30EFRX-68EUZN0         0A82 PQ: 0 ANSI: 5
[Sun Apr 28 16:39:23 2019] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[Sun Apr 28 16:39:23 2019] sd 0:0:0:0: [sda] 4096-byte physical blocks
[Sun Apr 28 16:39:23 2019] sd 0:0:0:0: [sda] Write Protect is off
[Sun Apr 28 16:39:23 2019] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Sun Apr 28 16:39:23 2019] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:23 2019]  sda: sda1 sda2 sda3
[Sun Apr 28 16:39:23 2019] sd 0:0:0:0: [sda] Attached SCSI disk
[Sun Apr 28 16:39:23 2019] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Sun Apr 28 16:39:23 2019] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[Sun Apr 28 16:39:23 2019] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[Sun Apr 28 16:39:23 2019] ata2.00: SN:     WD-WCC4NPXV0R44
[Sun Apr 28 16:39:23 2019] ata2.00: configured for UDMA/133
[Sun Apr 28 16:39:23 2019] scsi 1:0:0:0: Direct-Access     WDC      WD30EFRX-68EUZN0         0A82 PQ: 0 ANSI: 5
[Sun Apr 28 16:39:23 2019] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[Sun Apr 28 16:39:23 2019] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[Sun Apr 28 16:39:23 2019] sd 1:0:0:0: [sdb] Write Protect is off
[Sun Apr 28 16:39:23 2019] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[Sun Apr 28 16:39:23 2019] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:23 2019]  sdb: sdb1 sdb2 sdb3
[Sun Apr 28 16:39:23 2019] sd 1:0:0:0: [sdb] Attached SCSI disk
[Sun Apr 28 16:39:23 2019] tsc: Refined TSC clocksource calibration: 3492.219 MHz
[Sun Apr 28 16:39:23 2019] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32569a8dba7, max_idle_ns: 440795352586 ns
[Sun Apr 28 16:39:23 2019] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Sun Apr 28 16:39:23 2019] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[Sun Apr 28 16:39:23 2019] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[Sun Apr 28 16:39:23 2019] ata3.00: SN:     WD-WCC4NJVDC1KF
[Sun Apr 28 16:39:23 2019] ata3.00: configured for UDMA/133
[Sun Apr 28 16:39:23 2019] scsi 2:0:0:0: Direct-Access     WDC      WD30EFRX-68EUZN0         0A82 PQ: 0 ANSI: 5
[Sun Apr 28 16:39:23 2019] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[Sun Apr 28 16:39:23 2019] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[Sun Apr 28 16:39:23 2019] sd 2:0:0:0: [sdc] Write Protect is off
[Sun Apr 28 16:39:23 2019] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[Sun Apr 28 16:39:23 2019] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:23 2019]  sdc: sdc1 sdc2 sdc3
[Sun Apr 28 16:39:23 2019] sd 2:0:0:0: [sdc] Attached SCSI disk
[Sun Apr 28 16:39:24 2019] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Sun Apr 28 16:39:24 2019] ata4.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[Sun Apr 28 16:39:24 2019] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[Sun Apr 28 16:39:24 2019] ata4.00: SN:     WD-WCC4NHKF1NEK
[Sun Apr 28 16:39:24 2019] ata4.00: configured for UDMA/133
[Sun Apr 28 16:39:24 2019] scsi 3:0:0:0: Direct-Access     WDC      WD30EFRX-68EUZN0         0A82 PQ: 0 ANSI: 5
[Sun Apr 28 16:39:24 2019] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[Sun Apr 28 16:39:24 2019] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[Sun Apr 28 16:39:24 2019] sd 3:0:0:0: [sdd] Write Protect is off
[Sun Apr 28 16:39:24 2019] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[Sun Apr 28 16:39:24 2019] sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:24 2019]  sdd: sdd1 sdd2 sdd3
[Sun Apr 28 16:39:24 2019] sd 3:0:0:0: [sdd] Attached SCSI disk
[Sun Apr 28 16:39:24 2019] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Sun Apr 28 16:39:24 2019] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[Sun Apr 28 16:39:24 2019] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[Sun Apr 28 16:39:24 2019] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[Sun Apr 28 16:39:24 2019] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[Sun Apr 28 16:39:24 2019] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[Sun Apr 28 16:39:24 2019] ata5.00: SN:     WD-WCC4N5NKLXHU
[Sun Apr 28 16:39:24 2019] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[Sun Apr 28 16:39:24 2019] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[Sun Apr 28 16:39:24 2019] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[Sun Apr 28 16:39:24 2019] ata5.00: configured for UDMA/133
[Sun Apr 28 16:39:24 2019] scsi 4:0:0:0: Direct-Access     WDC      WD30EFRX-68EUZN0         0A82 PQ: 0 ANSI: 5
[Sun Apr 28 16:39:24 2019] sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[Sun Apr 28 16:39:24 2019] sd 4:0:0:0: [sde] 4096-byte physical blocks
[Sun Apr 28 16:39:24 2019] sd 4:0:0:0: [sde] Write Protect is off
[Sun Apr 28 16:39:24 2019] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[Sun Apr 28 16:39:24 2019] sd 4:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:24 2019]  sde: sde1 sde2 sde3
[Sun Apr 28 16:39:24 2019] sd 4:0:0:0: [sde] Attached SCSI disk
[Sun Apr 28 16:39:24 2019] clocksource: Switched to clocksource tsc
[Sun Apr 28 16:39:24 2019] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Sun Apr 28 16:39:24 2019] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[Sun Apr 28 16:39:24 2019] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[Sun Apr 28 16:39:24 2019] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[Sun Apr 28 16:39:24 2019] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[Sun Apr 28 16:39:24 2019] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[Sun Apr 28 16:39:24 2019] ata6.00: SN:     WD-WCC4N5NKLJYT
[Sun Apr 28 16:39:24 2019] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[Sun Apr 28 16:39:24 2019] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[Sun Apr 28 16:39:24 2019] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[Sun Apr 28 16:39:24 2019] ata6.00: configured for UDMA/133
[Sun Apr 28 16:39:24 2019] scsi 5:0:0:0: Direct-Access     WDC      WD30EFRX-68EUZN0         0A82 PQ: 0 ANSI: 5
[Sun Apr 28 16:39:24 2019] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[Sun Apr 28 16:39:24 2019] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[Sun Apr 28 16:39:24 2019] sd 5:0:0:0: [sdf] Write Protect is off
[Sun Apr 28 16:39:24 2019] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[Sun Apr 28 16:39:24 2019] sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:24 2019] i8042: PNP: No PS/2 controller found. Probing ports directly.
[Sun Apr 28 16:39:24 2019] serio: i8042 KBD port at 0x60,0x64 irq 1
[Sun Apr 28 16:39:24 2019] serio: i8042 AUX port at 0x60,0x64 irq 12
[Sun Apr 28 16:39:24 2019] i2c /dev entries driver
[Sun Apr 28 16:39:24 2019] i801_smbus 0000:00:1f.3: SMBus using polling
[Sun Apr 28 16:39:24 2019] md: linear personality registered for level -1
[Sun Apr 28 16:39:24 2019] md: raid0 personality registered for level 0
[Sun Apr 28 16:39:24 2019] md: raid1 personality registered for level 1
[Sun Apr 28 16:39:24 2019] md: raid10 personality registered for level 10
[Sun Apr 28 16:39:24 2019] md: raid6 personality registered for level 6
[Sun Apr 28 16:39:24 2019] md: raid5 personality registered for level 5
[Sun Apr 28 16:39:24 2019] md: raid4 personality registered for level 4
[Sun Apr 28 16:39:24 2019] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[Sun Apr 28 16:39:24 2019] NET: Registered protocol family 17
[Sun Apr 28 16:39:24 2019] Key type dns_resolver registered
[Sun Apr 28 16:39:24 2019] registered taskstats version 1
[Sun Apr 28 16:39:24 2019] Loading compiled-in untrusted X.509 certificates
[Sun Apr 28 16:39:24 2019] Loading compiled-in X.509 certificates
[Sun Apr 28 16:39:24 2019] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[Sun Apr 28 16:39:24 2019] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[Sun Apr 28 16:39:24 2019] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[Sun Apr 28 16:39:24 2019] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[Sun Apr 28 16:39:24 2019] page_owner is disabled
[Sun Apr 28 16:39:24 2019] AppArmor: AppArmor sha1 policy hashing enabled
[Sun Apr 28 16:39:24 2019] hctosys: unable to open rtc device (rtc0)
[Sun Apr 28 16:39:24 2019]  sdf: sdf1 sdf2 sdf3
[Sun Apr 28 16:39:24 2019] sd 5:0:0:0: [sdf] Attached SCSI disk
[Sun Apr 28 16:39:24 2019] Freeing unused kernel memory: 852K (ffffffff81878000 - ffffffff8194d000)
[Sun Apr 28 16:39:24 2019] Write protecting the kernel read-only data: 8192k
[Sun Apr 28 16:39:24 2019] Freeing unused kernel memory: 572K (ffff880001571000 - ffff880001600000)
[Sun Apr 28 16:39:24 2019] Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000)
[Sun Apr 28 16:39:24 2019] ACPI: bus type USB registered
[Sun Apr 28 16:39:24 2019] usbcore: registered new interface driver usbfs
[Sun Apr 28 16:39:24 2019] usbcore: registered new interface driver hub
[Sun Apr 28 16:39:24 2019] usbcore: registered new interface driver ethub
[Sun Apr 28 16:39:24 2019] usbcore: registered new device driver usb
[Sun Apr 28 16:39:24 2019] xhci_hcd 0000:00:14.0: xHCI Host Controller
[Sun Apr 28 16:39:24 2019] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[Sun Apr 28 16:39:24 2019] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010
[Sun Apr 28 16:39:24 2019] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[Sun Apr 28 16:39:24 2019] hub 1-0:1.0: USB hub found
[Sun Apr 28 16:39:24 2019] hub 1-0:1.0: 15 ports detected
[Sun Apr 28 16:39:24 2019] xhci_hcd 0000:00:14.0: xHCI Host Controller
[Sun Apr 28 16:39:24 2019] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[Sun Apr 28 16:39:24 2019] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[Sun Apr 28 16:39:24 2019] hub 2-0:1.0: USB hub found
[Sun Apr 28 16:39:24 2019] hub 2-0:1.0: 6 ports detected
[Sun Apr 28 16:39:24 2019] usb: port power management may be unreliable
[Sun Apr 28 16:39:24 2019] usbcore: registered new interface driver usb-storage
[Sun Apr 28 16:39:24 2019] VMware PVSCSI driver - version 1.0.5.0-k
[Sun Apr 28 16:39:24 2019] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[Sun Apr 28 16:39:24 2019] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[Sun Apr 28 16:39:25 2019] Fusion MPT base driver 3.04.20
[Sun Apr 28 16:39:25 2019] Copyright (c) 1999-2008 LSI Corporation
[Sun Apr 28 16:39:25 2019] Fusion MPT SPI Host driver 3.04.20
[Sun Apr 28 16:39:25 2019] Fusion MPT misc device (ioctl) driver 3.04.20
[Sun Apr 28 16:39:25 2019] mptctl: Registered with Fusion MPT base driver
[Sun Apr 28 16:39:25 2019] mptctl: /dev/mptctl @ (major,minor=10,220)
[Sun Apr 28 16:39:25 2019] megasas: 06.808.16.00-rc1
[Sun Apr 28 16:39:25 2019] mpt3sas version 09.102.00.00 loaded
[Sun Apr 28 16:39:25 2019] rtc_cmos 00:02: RTC can wake from S4
[Sun Apr 28 16:39:25 2019] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[Sun Apr 28 16:39:25 2019] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[Sun Apr 28 16:39:25 2019] apollolake_synobios: module license 'Synology Inc.' taints kernel.
[Sun Apr 28 16:39:25 2019] Disabling lock debugging due to kernel taint
[Sun Apr 28 16:39:25 2019] 2019-4-28 14:39:25 UTC
[Sun Apr 28 16:39:25 2019] synobios: load, major number 201
[Sun Apr 28 16:39:25 2019] Brand: Synology
[Sun Apr 28 16:39:25 2019] Model: DS-918+
[Sun Apr 28 16:39:25 2019] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[Sun Apr 28 16:39:25 2019] synobios cpu_arch proc entry initialized
[Sun Apr 28 16:39:25 2019] synobios crypto_hw proc entry initialized
[Sun Apr 28 16:39:25 2019] synobios syno_platform proc entry initialized
[Sun Apr 28 16:39:25 2019] synobios open /dev/ttyS1 success
[Sun Apr 28 16:39:25 2019] synobios: unload
[Sun Apr 28 16:39:25 2019] md: Autodetecting RAID arrays.
[Sun Apr 28 16:39:25 2019] md: invalid raid superblock magic on sda3
[Sun Apr 28 16:39:25 2019] random: nonblocking pool is initialized
[Sun Apr 28 16:39:25 2019] md: sda3 does not have a valid v0.90 superblock, not importing!
[Sun Apr 28 16:39:25 2019] md: invalid raid superblock magic on sdb3
[Sun Apr 28 16:39:25 2019] md: sdb3 does not have a valid v0.90 superblock, not importing!
[Sun Apr 28 16:39:25 2019] md: invalid raid superblock magic on sdc3
[Sun Apr 28 16:39:25 2019] md: sdc3 does not have a valid v0.90 superblock, not importing!
[Sun Apr 28 16:39:25 2019] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[Sun Apr 28 16:39:25 2019] md: invalid raid superblock magic on sdd3
[Sun Apr 28 16:39:25 2019] md: sdd3 does not have a valid v0.90 superblock, not importing!
[Sun Apr 28 16:39:25 2019] md: invalid raid superblock magic on sde3
[Sun Apr 28 16:39:25 2019] md: sde3 does not have a valid v0.90 superblock, not importing!
[Sun Apr 28 16:39:25 2019] md: invalid raid superblock magic on sdf3
[Sun Apr 28 16:39:25 2019] md: sdf3 does not have a valid v0.90 superblock, not importing!
[Sun Apr 28 16:39:25 2019] md: Scanned 18 and added 12 devices.
[Sun Apr 28 16:39:25 2019] md: autorun ...
[Sun Apr 28 16:39:25 2019] md: considering sda1 ...
[Sun Apr 28 16:39:25 2019] md:  adding sda1 ...
[Sun Apr 28 16:39:25 2019] md: sda2 has different UUID to sda1
[Sun Apr 28 16:39:25 2019] md:  adding sdb1 ...
[Sun Apr 28 16:39:25 2019] md: sdb2 has different UUID to sda1
[Sun Apr 28 16:39:25 2019] md:  adding sdc1 ...
[Sun Apr 28 16:39:25 2019] md: sdc2 has different UUID to sda1
[Sun Apr 28 16:39:25 2019] md:  adding sdd1 ...
[Sun Apr 28 16:39:25 2019] md: sdd2 has different UUID to sda1
[Sun Apr 28 16:39:25 2019] md:  adding sde1 ...
[Sun Apr 28 16:39:25 2019] md: sde2 has different UUID to sda1
[Sun Apr 28 16:39:25 2019] md:  adding sdf1 ...
[Sun Apr 28 16:39:25 2019] md: sdf2 has different UUID to sda1
[Sun Apr 28 16:39:25 2019] md: created md0
[Sun Apr 28 16:39:25 2019] md: bind<sdf1>
[Sun Apr 28 16:39:25 2019] md: bind<sde1>
[Sun Apr 28 16:39:25 2019] md: bind<sdd1>
[Sun Apr 28 16:39:25 2019] md: bind<sdc1>
[Sun Apr 28 16:39:25 2019] md: bind<sdb1>
[Sun Apr 28 16:39:25 2019] md: bind<sda1>
[Sun Apr 28 16:39:25 2019] md: running: <sda1><sdb1><sdc1><sdd1><sde1><sdf1>
[Sun Apr 28 16:39:25 2019] md/raid1:md0: active with 6 out of 12 mirrors
[Sun Apr 28 16:39:25 2019] hub 1-1:1.0: USB hub found
[Sun Apr 28 16:39:25 2019] hub 1-1:1.0: 5 ports detected
[Sun Apr 28 16:39:25 2019] md0: detected capacity change from 0 to 2549940224
[Sun Apr 28 16:39:25 2019] md: considering sda2 ...
[Sun Apr 28 16:39:25 2019] md:  adding sda2 ...
[Sun Apr 28 16:39:25 2019] md:  adding sdb2 ...
[Sun Apr 28 16:39:25 2019] md:  adding sdc2 ...
[Sun Apr 28 16:39:25 2019] md:  adding sdd2 ...
[Sun Apr 28 16:39:25 2019] md:  adding sde2 ...
[Sun Apr 28 16:39:25 2019] md:  adding sdf2 ...
[Sun Apr 28 16:39:25 2019] md: created md1
[Sun Apr 28 16:39:25 2019] md: bind<sdf2>
[Sun Apr 28 16:39:25 2019] md: bind<sde2>
[Sun Apr 28 16:39:25 2019] md: bind<sdd2>
[Sun Apr 28 16:39:25 2019] md: bind<sdc2>
[Sun Apr 28 16:39:25 2019] md: bind<sdb2>
[Sun Apr 28 16:39:25 2019] md: bind<sda2>
[Sun Apr 28 16:39:25 2019] md: running: <sda2><sdb2><sdc2><sdd2><sde2><sdf2>
[Sun Apr 28 16:39:25 2019] md/raid1:md1: active with 6 out of 12 mirrors
[Sun Apr 28 16:39:25 2019] md1: detected capacity change from 0 to 2147418112
[Sun Apr 28 16:39:25 2019] md: ... autorun DONE.
[Sun Apr 28 16:39:25 2019] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[Sun Apr 28 16:39:25 2019] Got empty serial number. Generate serial number from product.
[Sun Apr 28 16:39:25 2019] hub 2-1:1.0: USB hub found
[Sun Apr 28 16:39:25 2019] hub 2-1:1.0: 4 ports detected
[Sun Apr 28 16:39:25 2019] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[Sun Apr 28 16:39:25 2019] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[Sun Apr 28 16:39:25 2019] usb-storage 2-2:1.0: USB Mass Storage device detected
[Sun Apr 28 16:39:25 2019] scsi host6: usb-storage 2-2:1.0
[Sun Apr 28 16:39:26 2019] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
[Sun Apr 28 16:39:26 2019] Got empty serial number. Generate serial number from product.
[Sun Apr 28 16:39:26 2019] usb 2-1.3: new SuperSpeed USB device number 4 using xhci_hcd
[Sun Apr 28 16:39:26 2019] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[Sun Apr 28 16:39:26 2019] scsi host7: usb-storage 2-1.3:1.0
[Sun Apr 28 16:39:26 2019] usb 1-4: new full-speed USB device number 5 using xhci_hcd
[Sun Apr 28 16:39:26 2019] EXT4-fs (md0): barriers disabled
[Sun Apr 28 16:39:26 2019] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[Sun Apr 28 16:39:26 2019] usb 1-7: new high-speed USB device number 6 using xhci_hcd
[Sun Apr 28 16:39:26 2019] usb 1-7: not running at top speed
[Sun Apr 28 16:39:26 2019] scsi 6:0:0:0: Direct-Access     Inateck                           0    PQ: 0 ANSI: 6
[Sun Apr 28 16:39:26 2019] sd 6:0:0:0: [sdq] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[Sun Apr 28 16:39:26 2019] sd 6:0:0:0: [sdq] Write Protect is off
[Sun Apr 28 16:39:26 2019] sd 6:0:0:0: [sdq] Mode Sense: 43 00 00 00
[Sun Apr 28 16:39:26 2019] sd 6:0:0:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:27 2019]  sdq: sdq1
[Sun Apr 28 16:39:27 2019] sd 6:0:0:0: [sdq] Attached SCSI disk
[Sun Apr 28 16:39:27 2019] usb 1-7: new high-speed USB device number 6 using xhci_hcd
[Sun Apr 28 16:39:27 2019] scsi 7:0:0:0: Direct-Access     Seagate  Expansion Desk           0911 PQ: 0 ANSI: 6
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] Very big device. Trying to use READ CAPACITY(16).
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] 4096-byte physical blocks
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] Write Protect is off
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] Mode Sense: 47 00 00 08
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] Very big device. Trying to use READ CAPACITY(16).
[Sun Apr 28 16:39:27 2019]  sdr: sdr1
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] Very big device. Trying to use READ CAPACITY(16).
[Sun Apr 28 16:39:27 2019] sd 7:0:0:0: [sdr] Attached SCSI disk
[Sun Apr 28 16:39:27 2019] usb 1-7: not running at top speed
[Sun Apr 28 16:39:27 2019] usb 1-7: new high-speed USB device number 6 using xhci_hcd
[Sun Apr 28 16:39:27 2019] usb 1-7: not running at top speed
[Sun Apr 28 16:39:28 2019] usb 1-7: new high-speed USB device number 6 using xhci_hcd
[Sun Apr 28 16:39:28 2019] usb 1-7: not running at top speed
[Sun Apr 28 16:39:28 2019] usb 1-7: new high-speed USB device number 6 using xhci_hcd
[Sun Apr 28 16:39:28 2019] usb 1-7: not running at top speed
[Sun Apr 28 16:39:29 2019] usb 1-7: new high-speed USB device number 6 using xhci_hcd
[Sun Apr 28 16:39:29 2019] usb 1-7: not running at top speed
[Sun Apr 28 16:39:29 2019] usb-storage 1-7:1.0: USB Mass Storage device detected
[Sun Apr 28 16:39:29 2019] scsi host8: usb-storage 1-7:1.0
[Sun Apr 28 16:39:29 2019] usb 1-9: new high-speed USB device number 7 using xhci_hcd
[Sun Apr 28 16:39:29 2019] usb 1-9: not running at top speed
[Sun Apr 28 16:39:30 2019] usb 1-9: new high-speed USB device number 7 using xhci_hcd
[Sun Apr 28 16:39:30 2019] usb 1-9: not running at top speed
[Sun Apr 28 16:39:30 2019] scsi 8:0:0:0: Direct-Access     SanDisk  Cruzer Fit               1.00 PQ: 0 ANSI: 6
[Sun Apr 28 16:39:30 2019] sd 8:0:0:0: [synoboot] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
[Sun Apr 28 16:39:30 2019] sd 8:0:0:0: [synoboot] Write Protect is off
[Sun Apr 28 16:39:30 2019] sd 8:0:0:0: [synoboot] Mode Sense: 43 00 00 00
[Sun Apr 28 16:39:30 2019] sd 8:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Sun Apr 28 16:39:30 2019]  synoboot: synoboot1 synoboot2 synoboot3
[Sun Apr 28 16:39:30 2019] sd 8:0:0:0: [synoboot] Attached SCSI removable disk
[Sun Apr 28 16:39:30 2019] usb 1-9: new high-speed USB device number 7 using xhci_hcd
[Sun Apr 28 16:39:30 2019] usb 1-9: not running at top speed
[Sun Apr 28 16:39:31 2019] usb 1-9: new high-speed USB device number 7 using xhci_hcd
[Sun Apr 28 16:39:31 2019] usb 1-9: not running at top speed
[Sun Apr 28 16:39:31 2019] usb 1-9: new high-speed USB device number 7 using xhci_hcd
[Sun Apr 28 16:39:31 2019] usb 1-9: not running at top speed
[Sun Apr 28 16:39:32 2019] usb 1-9: new high-speed USB device number 7 using xhci_hcd
[Sun Apr 28 16:39:32 2019] usb 1-9: not running at top speed
[Sun Apr 28 16:39:32 2019] Got empty serial number. Generate serial number from product.
[Sun Apr 28 16:39:32 2019] drivers/usb/core/hub.c (2850) Same device found. Change serial to ffffffd6ffffffa3ffffffebffffffc0
[Sun Apr 28 16:39:32 2019] hub 1-9:1.0: USB hub found
[Sun Apr 28 16:39:32 2019] hub 1-9:1.0: 4 ports detected
[Sun Apr 28 16:39:32 2019] usb 1-9.4: new high-speed USB device number 8 using xhci_hcd
[Sun Apr 28 16:39:32 2019] Got empty serial number. Generate serial number from product.
[Sun Apr 28 16:39:32 2019] drivers/usb/core/hub.c (2850) Same device found. Change serial to ffffffd6ffffffa3ffffffebffffffc0
[Sun Apr 28 16:39:32 2019] drivers/usb/core/hub.c (2850) Same device found. Change serial to ffffffd6ffffffa3ffffffebffffffc1
[Sun Apr 28 16:39:32 2019] hub 1-9.4:1.0: USB hub found
[Sun Apr 28 16:39:32 2019] hub 1-9.4:1.0: 4 ports detected
[Sun Apr 28 16:39:32 2019] usb 1-9.4.4: new full-speed USB device number 9 using xhci_hcd
[Sun Apr 28 16:39:32 2019] usb 1-9.4.4: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
[Sun Apr 28 16:39:34 2019] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[Sun Apr 28 16:39:35 2019] EXT4-fs (md0): re-mounted. Opts: (null)
[Sun Apr 28 16:39:40 2019] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Sun Apr 28 16:39:40 2019] sd 1:0:0:0: Attached scsi generic sg1 type 0
[Sun Apr 28 16:39:40 2019] sd 2:0:0:0: Attached scsi generic sg2 type 0
[Sun Apr 28 16:39:40 2019] sd 3:0:0:0: Attached scsi generic sg3 type 0
[Sun Apr 28 16:39:40 2019] sd 4:0:0:0: Attached scsi generic sg4 type 0
[Sun Apr 28 16:39:40 2019] sd 5:0:0:0: Attached scsi generic sg5 type 0
[Sun Apr 28 16:39:40 2019] sd 6:0:0:0: Attached scsi generic sg6 type 0
[Sun Apr 28 16:39:40 2019] sd 7:0:0:0: Attached scsi generic sg7 type 0
[Sun Apr 28 16:39:40 2019] sd 8:0:0:0: Attached scsi generic sg8 type 0
[Sun Apr 28 16:39:41 2019] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[Sun Apr 28 16:39:41 2019] zram: Added device: zram0
[Sun Apr 28 16:39:41 2019] zram: Added device: zram1
[Sun Apr 28 16:39:41 2019] zram: Added device: zram2
[Sun Apr 28 16:39:41 2019] zram: Added device: zram3
[Sun Apr 28 16:39:41 2019] zram0: detected capacity change from 0 to 2524971008
[Sun Apr 28 16:39:41 2019] Adding 2465788k swap on /dev/zram0.  Priority:1 extents:1 across:2465788k SS
[Sun Apr 28 16:39:41 2019] zram1: detected capacity change from 0 to 2524971008
[Sun Apr 28 16:39:41 2019] Adding 2465788k swap on /dev/zram1.  Priority:1 extents:1 across:2465788k SS
[Sun Apr 28 16:39:41 2019] zram2: detected capacity change from 0 to 2524971008
[Sun Apr 28 16:39:41 2019] Adding 2465788k swap on /dev/zram2.  Priority:1 extents:1 across:2465788k SS
[Sun Apr 28 16:39:41 2019] zram3: detected capacity change from 0 to 2524971008
[Sun Apr 28 16:39:41 2019] Adding 2465788k swap on /dev/zram3.  Priority:1 extents:1 across:2465788k SS
[Sun Apr 28 16:39:44 2019] NET: Registered protocol family 10
[Sun Apr 28 16:39:44 2019] sit: IPv6 over IPv4 tunneling driver
[Sun Apr 28 16:39:44 2019] init: syno-auth-check main process (6351) killed by TERM signal
[Sun Apr 28 16:39:44 2019] Monitor-Mwait will be used to enter C-1 state
[Sun Apr 28 16:39:44 2019] Monitor-Mwait will be used to enter C-2 state
[Sun Apr 28 16:39:44 2019] ACPI: acpi_idle registered with cpuidle
[Sun Apr 28 16:39:45 2019] AVX2 version of gcm_enc/dec engaged.
[Sun Apr 28 16:39:45 2019] AES CTR mode by8 optimization enabled
[Sun Apr 28 16:39:45 2019] fuse init (API version 7.23)
[Sun Apr 28 16:39:45 2019] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[Sun Apr 28 16:39:45 2019] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[Sun Apr 28 16:39:45 2019] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[Sun Apr 28 16:39:45 2019] igb: Copyright (c) 2007-2014 Intel Corporation.
[Sun Apr 28 16:39:45 2019] pps pps0: new PPS source ptp0
[Sun Apr 28 16:39:45 2019] igb 0000:02:00.0: added PHC on eth0
[Sun Apr 28 16:39:45 2019] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[Sun Apr 28 16:39:45 2019] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:50:99:2d:fb:4e
[Sun Apr 28 16:39:45 2019] igb 0000:02:00.0: eth0: PBA No: 001300-000
[Sun Apr 28 16:39:45 2019] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[Sun Apr 28 16:39:45 2019] pps pps1: new PPS source ptp1
[Sun Apr 28 16:39:45 2019] igb 0000:03:00.0: added PHC on eth1
[Sun Apr 28 16:39:45 2019] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[Sun Apr 28 16:39:45 2019] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) d0:50:99:2d:fb:4f
[Sun Apr 28 16:39:45 2019] igb 0000:03:00.0: eth1: PBA No: 001300-000
[Sun Apr 28 16:39:45 2019] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[Sun Apr 28 16:39:45 2019] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[Sun Apr 28 16:39:45 2019] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[Sun Apr 28 16:39:45 2019] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[Sun Apr 28 16:39:45 2019] ACPI: Power Button [PWRB]
[Sun Apr 28 16:39:45 2019] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[Sun Apr 28 16:39:45 2019] ACPI: Sleep Button [SLPB]
[Sun Apr 28 16:39:45 2019] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[Sun Apr 28 16:39:45 2019] ACPI: Power Button [PWRF]
[Sun Apr 28 16:39:45 2019] Linux agpgart interface v0.103
[Sun Apr 28 16:39:45 2019] Btrfs loaded, crc32c=crc32c-intel
[Sun Apr 28 16:39:45 2019] exFAT: Version 1.2.9
[Sun Apr 28 16:39:45 2019] jme: JMicron JMC2XX ethernet driver version 1.0.8
[Sun Apr 28 16:39:45 2019] sky2: driver version 1.30
[Sun Apr 28 16:39:45 2019] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.63
[Sun Apr 28 16:39:45 2019] QLogic/NetXen Network Driver v4.0.82
[Sun Apr 28 16:39:45 2019] Solarflare NET driver v4.0
[Sun Apr 28 16:39:45 2019] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[Sun Apr 28 16:39:45 2019] e1000: Copyright (c) 1999-2006 Intel Corporation.
[Sun Apr 28 16:39:45 2019] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[Sun Apr 28 16:39:45 2019] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
[Sun Apr 28 16:39:45 2019] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[Sun Apr 28 16:39:45 2019] usbcore: registered new interface driver ax88179_178a
[Sun Apr 28 16:39:45 2019] 2019-4-28 14:39:46 UTC
[Sun Apr 28 16:39:45 2019] synobios: load, major number 201
[Sun Apr 28 16:39:45 2019] Brand: Synology
[Sun Apr 28 16:39:45 2019] Model: DS-918+
[Sun Apr 28 16:39:45 2019] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[Sun Apr 28 16:39:45 2019] synobios cpu_arch proc entry initialized
[Sun Apr 28 16:39:45 2019] synobios crypto_hw proc entry initialized
[Sun Apr 28 16:39:45 2019] synobios syno_platform proc entry initialized
[Sun Apr 28 16:39:45 2019] synobios open /dev/ttyS1 success
[Sun Apr 28 16:39:45 2019] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[Sun Apr 28 16:39:46 2019] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sun Apr 28 16:39:46 2019] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[Sun Apr 28 16:39:46 2019] ip6_tables: (C) 2000-2006 Netfilter Core Team
[Sun Apr 28 16:39:46 2019] systemd-udevd[8030]: starting version 204
[Sun Apr 28 16:39:47 2019] md: md2 stopped.
[Sun Apr 28 16:39:47 2019] md: bind<sdb3>
[Sun Apr 28 16:39:47 2019] md: bind<sdc3>
[Sun Apr 28 16:39:47 2019] md: bind<sdd3>
[Sun Apr 28 16:39:47 2019] md: bind<sdf3>
[Sun Apr 28 16:39:47 2019] md: bind<sde3>
[Sun Apr 28 16:39:47 2019] md: bind<sda3>
[Sun Apr 28 16:39:47 2019] md/raid:md2: device sda3 operational as raid disk 0
[Sun Apr 28 16:39:47 2019] md/raid:md2: device sde3 operational as raid disk 5
[Sun Apr 28 16:39:47 2019] md/raid:md2: device sdf3 operational as raid disk 4
[Sun Apr 28 16:39:47 2019] md/raid:md2: device sdd3 operational as raid disk 3
[Sun Apr 28 16:39:47 2019] md/raid:md2: device sdc3 operational as raid disk 2
[Sun Apr 28 16:39:47 2019] md/raid:md2: device sdb3 operational as raid disk 1
[Sun Apr 28 16:39:47 2019] md/raid:md2: allocated 6492kB
[Sun Apr 28 16:39:47 2019] md/raid:md2: raid level 5 active with 6 out of 6 devices, algorithm 2
[Sun Apr 28 16:39:47 2019] RAID conf printout:
[Sun Apr 28 16:39:47 2019]  --- level:5 rd:6 wd:6
[Sun Apr 28 16:39:47 2019]  disk 0, o:1, dev:sda3
[Sun Apr 28 16:39:47 2019]  disk 1, o:1, dev:sdb3
[Sun Apr 28 16:39:47 2019]  disk 2, o:1, dev:sdc3
[Sun Apr 28 16:39:47 2019]  disk 3, o:1, dev:sdd3
[Sun Apr 28 16:39:47 2019]  disk 4, o:1, dev:sdf3
[Sun Apr 28 16:39:47 2019]  disk 5, o:1, dev:sde3
[Sun Apr 28 16:39:47 2019] md2: detected capacity change from 0 to 14978786590720
[Sun Apr 28 16:39:48 2019] usb 1-9.4.4: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
[Sun Apr 28 16:39:48 2019] EXT4-fs (md2): Ignoring removed nomblk_io_submit option
[Sun Apr 28 16:39:48 2019] igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[Sun Apr 28 16:39:48 2019] EXT4-fs (md2): barriers disabled
[Sun Apr 28 16:39:48 2019] igb 0000:03:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[Sun Apr 28 16:39:49 2019] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,nomblk_io_submit,synoacl,data=writeback
[Sun Apr 28 16:39:50 2019] init: dhcp-client (eth0) main process (9258) killed by TERM signal
[Sun Apr 28 16:39:50 2019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Sun Apr 28 16:39:50 2019] ehci-pci: EHCI PCI platform driver
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1a.0: EHCI Host Controller
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1a.0: debug port 2
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7313000
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[Sun Apr 28 16:39:50 2019] hub 3-0:1.0: USB hub found
[Sun Apr 28 16:39:50 2019] hub 3-0:1.0: 2 ports detected
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1d.0: EHCI Host Controller
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1d.0: debug port 2
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1d.0: irq 22, io mem 0xf7312000
[Sun Apr 28 16:39:50 2019] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[Sun Apr 28 16:39:50 2019] hub 4-0:1.0: USB hub found
[Sun Apr 28 16:39:50 2019] hub 4-0:1.0: 2 ports detected
[Sun Apr 28 16:39:50 2019] uhci_hcd: USB Universal Host Controller Interface driver
[Sun Apr 28 16:39:50 2019] usbcore: registered new interface driver usblp
[Sun Apr 28 16:39:50 2019] usbcore: registered new interface driver usbhid
[Sun Apr 28 16:39:50 2019] usbhid: USB HID core driver
[Sun Apr 28 16:39:50 2019] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046B:FF10.0001/input/input3
[Sun Apr 28 16:39:50 2019] hid-generic 0003:046B:FF10.0001: input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1.4/input0
[Sun Apr 28 16:39:50 2019] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046B:FF10.0002/input/input4
[Sun Apr 28 16:39:50 2019] hid-generic 0003:046B:FF10.0002: input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1.4/input1
[Sun Apr 28 16:39:50 2019] usb 3-1: new high-speed USB device number 2 using ehci-pci
[Sun Apr 28 16:39:50 2019] usb 4-1: new high-speed USB device number 2 using ehci-pci
[Sun Apr 28 16:39:51 2019] Got empty serial number. Generate serial number from product.
[Sun Apr 28 16:39:51 2019] hub 3-1:1.0: USB hub found
[Sun Apr 28 16:39:51 2019] hub 3-1:1.0: 6 ports detected
[Sun Apr 28 16:39:51 2019] Got empty serial number. Generate serial number from product.
[Sun Apr 28 16:39:51 2019] drivers/usb/core/hub.c (2850) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
[Sun Apr 28 16:39:51 2019] hub 4-1:1.0: USB hub found
[Sun Apr 28 16:39:51 2019] hub 4-1:1.0: 8 ports detected
[Sun Apr 28 16:39:53 2019] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(d050992dfb4e).
[Sun Apr 28 16:39:53 2019] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[Sun Apr 28 16:39:53 2019] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[Sun Apr 28 16:39:53 2019] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[Sun Apr 28 16:39:53 2019] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled.
[Sun Apr 28 16:39:53 2019] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled.
[Sun Apr 28 16:39:53 2019] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[Sun Apr 28 16:39:53 2019] iSCSI:target_core_ep.c:813:ep_attach_hba RODSP plugin for epio is enabled.
[Sun Apr 28 16:39:53 2019] iSCSI:target_core_ep.c:820:ep_attach_hba ODX Token Manager is enabled.
[Sun Apr 28 16:39:54 2019] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[Sun Apr 28 16:39:55 2019] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[Sun Apr 28 16:39:55 2019] NFSD: starting 90-second grace period (net ffffffff81862080)
[Sun Apr 28 16:39:55 2019] loop: module loaded
[Sun Apr 28 16:39:56 2019] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[Sun Apr 28 16:39:57 2019] EXT4-fs (sdr1): barriers disabled
[Sun Apr 28 16:39:57 2019] EXT4-fs (sdr1): mounted filesystem with ordered data mode. Opts: nodelalloc,synoacl,data=ordered

 

Share this post


Link to post
Share on other sites
On 4/27/2019 at 7:02 AM, Infray said:

 

it's maybe a stretch to say I'm using a similar board (Supermicro AS2Di-4C-HLN4F: Intel SOC C3000, X553)

but I had to disable VT-d Interrupt remapping in the BIOS to get DS3615 loader 1.02b running (with the extra.lzma for X553).

 

No luck yet with any of the newer loaders though.

 

Cheers for letting me know, I had disabled vt-d in bios previously.

 

I think your board has 4 x 1gbe nic ports and these should be recognized by the 1.04 loader natively or older loader with extra.izma as you have found out and installed. My board only has 2 x 10gbe copper nic ports and I think these require a higher driver revision than what is in the latest loader, as well as the extra.izma.

 

I don't think kernel panic is occuring or the i915 is problematic, I think the install is occurring fine just no nic driver working. I may try and get a usb to ehternet adaptor and try.

Share this post


Link to post
Share on other sites
2 hours ago, venno said:

 

Cheers for letting me know, I had disabled vt-d in bios previously.

 

I think your board has 4 x 1gbe nic ports and these should be recognized by the 1.04 loader natively or older loader with extra.izma as you have found out and installed. My board only has 2 x 10gbe copper nic ports and I think these require a higher driver revision than what is in the latest loader, as well as the extra.izma.

 

I don't think kernel panic is occuring or the i915 is problematic, I think the install is occurring fine just no nic driver working. I may try and get a usb to ehternet adaptor and try.

Unfortunately, I've been having the same results with 1.04 (with extra.lzma) and 1.03 (with extra.lzma).

 

I'm just hoping a new loader will be released in the future for DS3615xs containing the 6.2.1 drivers. According to this post the drivers I need are natively supported from then on.

Share this post


Link to post
Share on other sites

So, everything seems to run flawlessly now after deleting /.xpenoboot and doing a reboot.. But maybe someone has a solution to another problem I had/have: After flashing Jun's loader to a USB stick with Win32 DiskImager I can never overwrite it again, because it reports as write protected. I had this same issue with 1.02b and now again with 1.04b. Is there any solution to this? Not that USB sticks are that expensive anymore, but it's pretty inconvenient to always have to buy new ones.

Share this post


Link to post
Share on other sites
2 часа назад, b1lou сказал:

So, everything seems to run flawlessly now after deleting /.xpenoboot and doing a reboot.. But maybe someone has a solution to another problem I had/have: After flashing Jun's loader to a USB stick with Win32 DiskImager I can never overwrite it again, because it reports as write protected. I had this same issue with 1.02b and now again with 1.04b. Is there any solution to this? Not that USB sticks are that expensive anymore, but it's pretty inconvenient to always have to buy new ones.

 

Windows console

diskpart

list disk

select disk #

clean

 

Good

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.