jun

DSM 6.2 Loader

Recommended Posts

3 minutes ago, sunshine said:
10 minutes ago, neeiro said:

I'm doing a new build with a j1900 processor is it worth using 6.2 or 6.1, how stable is 6.2 at the moment?

 

 

i'd been using the asrock q1900 motherboard on 6.1 (baremetal) for about a year.  earlier this week i upgraded to 6.2 with the 1.03b loader (after doing a hyper backup to an external drive).

i also expanded my SHR pool from four WD red 3TB to five.  no issues thus far.

Share this post


Link to post
Share on other sites
Posted (edited)
3 hours ago, dh22r said:

 

i'd been using the asrock q1900 motherboard on 6.1 (baremetal) for about a year.  earlier this week i upgraded to 6.2 with the 1.03b loader (after doing a hyper backup to an external drive).

i also expanded my SHR pool from four WD red 3TB to five.  no issues thus far.

 

Thanks for the response - just trying it now but its not working as I need Custom Extras for a Quad Intel Nic card, get a boot loop if O try adding the extras from 6.1 loader.

 

Update - Tried with default extra file and it seems to be working :)  

Edited by neeiro

Share this post


Link to post
Share on other sites

It works for me . Install it under Linux kvm with Xeon(R) CPU E31220L

- Create a dummy kvm host

- Remove all the device  (add back once next step is done)

- Edit the xml and change the chipset to Q35   like "<type arch='x86_64' machine='pc-q35-bionic'>hvm</type>"

- Add the img as usb disk (boot)

- Add a data disk  (sata)

- Boot up the host , till you see the "Screen will stop updating ...."

- Use the "find synology tool"  to search for the new host (for some reason, I am not able to find it via http://find.sy..com )

 

Able to install the package via  web download  (DSM 6.2-23739) and reboot also without problem,

 

Thank Jun for providing such a fun  tool to play with ..

 

Share this post


Link to post
Share on other sites
On 8/24/2018 at 4:51 PM, sunshine said:

I did it.... from DSM 6.1 to 6.2 AND at same moment I changed with migration option from (older model) DS3615xs to (newer model) DS918+ (baremetal).....

 

Update succesful

...........

Everything migrated from 3615xs to 918+ : all datas, all users, all packages (except "...stat.." (?), I don´t remember the name, cause i didn´t use it often).......................

 

I remebered the Tool that didnt migrate/run after upgrading from DSM 6.1 to 6.2: "DarkStat"

Share this post


Link to post
Share on other sites
Posted (edited)

I tried the 1.03b loader on a baremetal ASUS AMD E35M1-I and the result is unsuccessful. Loader 1.02b works fine with DSM 6.1 on this board.

 

GRUB loads OK but DSM is never loaded.

 

It is my impression that this is related to the UEFI issue that Jun mentioned that needs to be fixed. This motherboard has a limited EFI BIOS and there is no option to set CSM as "enabled" (I had to enable CSM in another board to successfully load DSM 6.2 with loaded 1.03b).

 

 

 

 

Edited by _dsouza_

Share this post


Link to post
Share on other sites

Hello,

 

I migrated a HP microserver NL54 baremetal from 6.1 to 6.2 (3615), at the beginning all seems working ok, i can connect to the web ui, open file station, etc, but after few seconds (about 60secs) all services stopped, no lan interface is listed but i can get it with the ifconfig command. If i try to open the resource monitor i get a "Connection Error".

 

Any idea about what is going wrong?

 

Thanks

Share this post


Link to post
Share on other sites

I can't get this new loader to actually work under VMWare Workstation Pro 12.

 

It just boots to the network, if I go to the boot menu and select the CD/DVD ROM drive nothing happens?

 

And I doing anything wrong? Happily running XPEnoboot for DSM 5.2 

Share this post


Link to post
Share on other sites
On ‎8‎/‎24‎/‎2018 at 9:48 PM, bearcat said:

@Benoire : any special reason you want a "new" bootloader, instead of using the ds3617xs loader?

hint

Unless its changed, the loader is simply a way to get the DSM version running on your own hardware.  The 361x versions are 12 bay devices and will always update like that unless there is something in the loader like the 918+ does to get it to 12 bays.  If you expand, via the config, the bays to 16 the config will always be overwritten on an upgrade and drop back to 12 and if you have more than 12 disks it will cause array issues as it won't load all disks.  I was rather hoping that instead of this constant editing of the config we could have another image based on the 16 bay devices; this could either be a 16 bay 361x vesion or the true synology ones.

 

Yes, perhaps I'm being lazy but I also don't want to put my array at risk on updates beyond what I normally have with the loaders.

  • Thanks 2

Share this post


Link to post
Share on other sites

My hardware is wd pr4100 I put the 1.03b boot into emmc. Startup error Prompt mount failed, no problem with bootable USB flash drive. Is this the reason why the guide does not support uefi?

Share this post


Link to post
Share on other sites
Posted (edited)
22 hours ago, _dsouza_ said:

GRUB loads OK but DSM is never loaded.

Same in may case with 1.03b and DSM 6.1 loaded.

My HP 8200 EliteDesk BIOS also has no CSM settings ... However ver. 1.02b works just fine.

And I don't want to upgrade to 6.2 before loader works.

Any other suggestions?

Does loader 1.03b work with DSM 6.1 or is it just for 6.2?

Edited by Mitja

Share this post


Link to post
Share on other sites

Hi all,

 

the current available loader is working fine, but is it possible to add the VIRTIO drivers?

At this moment i have the normal intel e1000, but the interface is dropping many packages.

 

Regards.

Share this post


Link to post
Share on other sites
17 hours ago, Prinz_Protato said:

I can't get this new loader to actually work under VMWare Workstation Pro 12.

 

It just boots to the network, if I go to the boot menu and select the CD/DVD ROM drive nothing happens?

 

And I doing anything wrong? Happily running XPEnoboot for DSM 5.2 

Did you define the vmdk's as sata disks?

Share this post


Link to post
Share on other sites
Posted (edited)
7 minutes ago, manalishit said:

Did you define the vmdk's as sata disks?

 

What VMDK? it didn't come with one? all I got was a synoboot.img file and it doesn't get to a bootloader at all! I must've gotten the baremetal install one, I guess? is there a specific version for VMWare? Looks like i'm doing something seriously wrong here

 

Downloaded the Synoboot_3615. zip file from: 

https://mega.nz/#F!ZlkHQTTb!keje3RK017OjTp3vuWb-Cw

Edited by Prinz_Protato

Share this post


Link to post
Share on other sites
22 minutes ago, Prinz_Protato said:

 

What VMDK? it didn't come with one? all I got was a synoboot.img file and it doesn't get to a bootloader at all! I must've gotten the baremetal install one, I guess? is there a specific version for VMWare? Looks like i'm doing something seriously wrong here

 

Downloaded the Synoboot_3615. zip file from: 

https://mega.nz/#F!ZlkHQTTb!keje3RK017OjTp3vuWb-Cw

check out this video. at 4.20min you will find the vmdk explanation.

___https://www.youtube.com/watch?v=Si9Y1HNhYrI

Share this post


Link to post
Share on other sites
53 minutes ago, manalishit said:

check out this video. at 4.20min you will find the vmdk explanation.

___https://www.youtube.com/watch?v=Si9Y1HNhYrI

 

I followed this tutorial initially, but I didn't think to try fudge in the new Synoboot.img file.

 

Worked wonderfully as soon as I did.

 

Thank you

Share this post


Link to post
Share on other sites
42 minutes ago, Prinz_Protato said:

 

I followed this tutorial initially, but I didn't think to try fudge in the new Synoboot.img file.

 

Worked wonderfully as soon as I did.

 

Thank you

the vmdk just refers to the synoboot.img file. all you need to do is choose "sata" when adding the synoboot.vmdk disk

 

Share this post


Link to post
Share on other sites

Unsuccessful on Asrock J3455M, the micro-atx version.  6.1 works  perfectly on this board. I suspect it's an issue with the onboard NIC. It looks like it boots up but the NIC doesn't initialize (light doesn't turn green).

 

From other's posts, it sounds like the itx version works just fine.

 

I tried using an  intel NIC (Intel(R) Gigabit CT Desktop Adapter), that also did not work.

Share this post


Link to post
Share on other sites
Posted (edited)

Since I can't edit my previous post, I can say that my installation was a complete success (see my post page 13). After backing up my files and blowing away dsm 6.01 on the disks, 6.2 installed happily, and I didn't have any issues setting my "Diskstation" back up, except having to ssh in and enable SHR again thru vi.

 

Thanks once again Jun, your a legend!

Edited by vk2fro

Share this post


Link to post
Share on other sites
Posted (edited)

918+ (1.03a2) doesn't show up on network in my test VM after applying 6.2.1. I attached serial log from the VM:
line 0-54 = normal boot with 6.2u2

line 59-468 = boot right after uploading .pat in DSM

line 468+ = another try, same error with mptspi (?)

It does not boot with either BIOS or UEFI. Don't take this as proof that the update doesn't work though, the VM only boots (with 6.2) with the baremetal option and only in BIOS mode. My baremetal install boots with UEFI just fine.

 

Spoiler

[H[J[1;1H[?25l[m[H[J[1;1H[2;20HGNU GRUB  version 2.02~beta2-36ubuntu3.14

[m[4;2H+----------------------------------------------------------------------------+[5;2H|[5;79H|[6;2H|[6;79H|[7;2H|[7;79H|[8;2H|[8;79H|[9;2H|[9;79H|[10;2H|[10;79H|[11;2H|[11;79H|[12;2H|[12;79H|[13;2H|[13;79H|[14;2H|[14;79H|[15;2H|[15;79H|[16;2H|[16;79H|[17;2H+----------------------------------------------------------------------------+[m[18;2H[19;2H[m     Use the ^ and v keys to select which entry is highlighted.          
      Press enter to boot the selected OS, `e' to edit the commands       
      before booting or `c' for a command-line.                           [5;80H [m[5;3H DS918+ 6.2 Baremetal with Jun's Mod v1.03a                                 [m[5;78H[m[m[6;3H DS918+ 6.2 Baremetal with Jun's Mod v1.03a Reinstall                       [m[6;78H[m[7m[7;3H*DS918+ 6.2 VMWare/ESXI with Jun's Mod v1.03a                               [m[7;78H[m[m[8;3H                                                                            [m[8;78H[m[m[9;3H                                                                            [m[9;78H[m[m[10;3H                                                                            [m[10;78H[m[m[11;3H                                                                            [m[11;78H[m[m[12;3H                                                                            [m[12;78H[m[m[13;3H                                                                            [m[13;78H[m[m[14;3H                                                                            [m[14;78H[m[m[15;3H                                                                            [m[15;78H[m[m[16;3H                                                                            [m[16;78H[m[16;80H [7;78H[22;1H   The highlighted entry will be executed automatically in 1s.                 [7;78H[22;1H                                                                               [23;1H                                                                               [7;78H[m[7;3H DS918+ 6.2 VMWare/ESXI with Jun's Mod v1.03a                               [m[7;78H[m[7m[6;3H*DS918+ 6.2 Baremetal with Jun's Mod v1.03a Reinstall                       [m[6;78H[m[m[6;3H DS918+ 6.2 Baremetal with Jun's Mod v1.03a Reinstall                       [m[6;78H[m[7m[5;3H*DS918+ 6.2 Baremetal with Jun's Mod v1.03a                                 [m[5;78H[m[?25h[H[J[1;1H[H[J[1;1H[H[J[1;1H[H[J[1;1Hpatching file etc/rc
patching file etc/synoinfo.conf
Hunk #2 FAILED at 266.
Hunk #3 FAILED at 311.
2 out of 3 hunks FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi ... [  OK  ]
:: Loading module mptctl ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
:: Loading module mdio ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[   10.472282] md: invalid raid superblock magic on sdb5
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0... 
/sbin/e2fsck -pvf returns 1
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
No upgrade file exists
End upgrade procedure
============upgrade
Wait 2 seconds for synology manufactory device
Wed Aug 29 09:02:18 UTC 2018
/dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=2010508k,nr_inodes=502627,mode=755 0 0
proc /proc proc rw,relatime 0 0

linuxrc.syno executed successfully.
Post init



NASTest login: [   89.738353] reboot: Restarting system
[H[J[1;1H[?25l[m[H[J[1;1H[2;20HGNU GRUB  version 2.02~beta2-36ubuntu3.14

[m[4;2H+----------------------------------------------------------------------------+[5;2H|[5;79H|[6;2H|[6;79H|[7;2H|[7;79H|[8;2H|[8;79H|[9;2H|[9;79H|[10;2H|[10;79H|[11;2H|[11;79H|[12;2H|[12;79H|[13;2H|[13;79H|[14;2H|[14;79H|[15;2H|[15;79H|[16;2H|[16;79H|[17;2H+----------------------------------------------------------------------------+[m[18;2H[19;2H[m     Use the ^ and v keys to select which entry is highlighted.          
      Press enter to boot the selected OS, `e' to edit the commands       
      before booting or `c' for a command-line.                           [5;80H [7m[5;3H*DS918+ 6.2 Baremetal with Jun's Mod v1.03a                                 [m[5;78H[m[m[6;3H DS918+ 6.2 Baremetal with Jun's Mod v1.03a Reinstall                       [m[6;78H[m[m[7;3H DS918+ 6.2 VMWare/ESXI with Jun's Mod v1.03a                               [m[7;78H[m[m[8;3H                                                                            [m[8;78H[m[m[9;3H                                                                            [m[9;78H[m[m[10;3H                                                                            [m[10;78H[m[m[11;3H                                                                            [m[11;78H[m[m[12;3H                                                                            [m[12;78H[m[m[13;3H                                                                            [m[13;78H[m[m[14;3H                                                                            [m[14;78H[m[m[15;3H                                                                            [m[15;78H[m[m[16;3H                                                                            [m[16;78H[m[16;80H [5;78H[22;1H   The highlighted entry will be executed automatically in 1s.                 [5;78H[22;1H   The highlighted entry will be executed automatically in 0s.                 [5;78H[?25h[H[J[1;1H[H[J[1;1H[H[J[1;1H[H[J[1;1H[    1.868519] ata4: No present pin info for SATA link down event
[    2.174571] ata5: No present pin info for SATA link down event
[    2.480644] ata6: No present pin info for SATA link down event
[    2.786678] ata7: No present pin info for SATA link down event
[    3.092769] ata8: No present pin info for SATA link down event
[    3.398798] ata9: No present pin info for SATA link down event
[    3.704986] ata10: No present pin info for SATA link down event
[    4.014964] ata11: No present pin info for SATA link down event
[    4.320988] ata12: No present pin info for SATA link down event
[    4.627040] ata13: No present pin info for SATA link down event
[    4.933135] ata14: No present pin info for SATA link down event
[    5.240154] ata15: No present pin info for SATA link down event
[    5.546228] ata16: No present pin info for SATA link down event
[    5.852329] ata17: No present pin info for SATA link down event
[    6.158369] ata18: No present pin info for SATA link down event
[    6.464481] ata19: No present pin info for SATA link down event
[    6.770456] ata20: No present pin info for SATA link down event
[    7.076524] ata21: No present pin info for SATA link down event
[    7.382577] ata22: No present pin info for SATA link down event
[    7.688638] ata23: No present pin info for SATA link down event
[    7.994696] ata24: No present pin info for SATA link down event
[    8.300763] ata25: No present pin info for SATA link down event
[    8.606815] ata26: No present pin info for SATA link down event
[    8.912880] ata27: No present pin info for SATA link down event
[    9.218934] ata28: No present pin info for SATA link down event
[    9.524995] ata29: No present pin info for SATA link down event
[    9.831081] ata30: No present pin info for SATA link down event
patching file etc/rc
patching file etc/synoinfo.conf
Hunk #2 FAILED at 266.
Hunk #3 FAILED at 311.
2 out of 3 hunks FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
Hunk #3 succeeded at 552 (offset 1 line).
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi[   10.130194] BUG: unable to handle kernel paging request at 00000000ffffffff
[   10.130294] IP: [<ffffffffa00c603d>] mpt_mapresources+0x23d/0x320 [mptbase]
[   10.131186] PGD b1225067 PUD 0 
[   10.131286] Oops: 0002 [#1] PREEMPT SMP 
[   10.131385] Modules linked in: mptspi(E+) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd ohci_hcd(E) usbcore usb_common pcqxow(OE)
[   10.133190] CPU: 3 PID: 4886 Comm: insmod Tainted: G           OE   4.4.59+ #23824
[   10.133289] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[   10.134190] task: ffff88013b396580 ti: ffff8800b1b08000 task.ti: ffff8800b1b08000
[   10.135090] RIP: 0010:[<ffffffffa00c603d>]  [<ffffffffa00c603d>] mpt_mapresources+0x23d/0x320 [mptbase]
[   10.136142] RSP: 0018:ffff8800b1b0bad8  EFLAGS: 00010202
[   10.136241] RAX: 00000000ffffffff RBX: ffff8800bb90a000 RCX: 0000000000000000
[   10.137191] RDX: 0000000000000000 RSI: ffffffffffffffff RDI: ffff8800bb80e098
[   10.137290] RBP: ffff8800b1b0bb00 R08: ffff8800bb80e420 R09: 0000000000000000
[   10.138182] R10: ffff8800b9e18100 R11: 0000000000000000 R12: ffff8800bb80e000
[   10.138282] R13: 0000000000000000 R14: ffff8800bb80e098 R15: ffff8800bb90a000
[   10.139107] FS:  00007fb9ea9d9700(0000) GS:ffff88013fcc0000(0000) knlGS:0000000000000000
[   10.139207] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   10.139306] CR2: 00000000ffffffff CR3: 00000000b81f1000 CR4: 00000000003606f0
[   10.140191] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   10.140291] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   10.141092] Stack:
[   10.141192]  ffff8800bb80e000 ffffffffa00e4780 ffff8800bb80e000 ffffffffa00e4780
[   10.142192]  ffff8800bb90a000 ffff8800b1b0bb60 ffffffffa00cb0b3 00000004811a94cf
[   10.143192]  00000000b1b0bb38 ffff880139e350a0 ffff8800bb90a008 ffff8800bb025d48
[   10.144154] Call Trace:
[   10.144254]  [<ffffffffa00cb0b3>] mpt_attach+0x83/0xc30 [mptbase]
[   10.145180]  [<ffffffffa00e2c58>] mptspi_probe+0x18/0x390 [mptspi]
[   10.145279]  [<ffffffff8138decd>] ? __pm_runtime_resume+0x4d/0x60
[   10.145379]  [<ffffffff812fc85c>] pci_device_probe+0x8c/0x100
[   10.145468]  [<ffffffff813842d1>] driver_probe_device+0x1f1/0x310
[   10.146193]  [<ffffffff81384472>] __driver_attach+0x82/0x90
[   10.146292]  [<ffffffff813843f0>] ? driver_probe_device+0x310/0x310
[   10.146391]  [<ffffffff81382361>] bus_for_each_dev+0x61/0xa0
[   10.146479]  [<ffffffff81383d69>] driver_attach+0x19/0x20
[   10.147193]  [<ffffffff81383993>] bus_add_driver+0x1b3/0x230
[   10.147292]  [<ffffffffa00e7000>] ? 0xffffffffa00e7000
[   10.147391]  [<ffffffff81384c7b>] driver_register+0x5b/0xe0
[   10.148094]  [<ffffffff812fb337>] __pci_register_driver+0x47/0x50
[   10.148193]  [<ffffffffa00e70dc>] mptspi_init+0xdc/0xfa [mptspi]
[   10.148292]  [<ffffffff810003b6>] do_one_initcall+0x86/0x1b0
[   10.149135]  [<ffffffff810dfdd8>] do_init_module+0x56/0x1be
[   10.149234]  [<ffffffff810b61ad>] load_module+0x1ded/0x2070
[   10.150094]  [<ffffffff810b3510>] ? __symbol_put+0x50/0x50
[   10.150193]  [<ffffffff81113b35>] ? map_vm_area+0x35/0x50
[   10.150293]  [<ffffffff81114e7c>] ? __vmalloc_node_range+0x13c/0x240
[   10.151094]  [<ffffffff810b64b8>] ? SYSC_init_module+0x88/0x110
[   10.151194]  [<ffffffff810b652f>] SYSC_init_module+0xff/0x110
[   10.151293]  [<ffffffff810b65c9>] SyS_init_module+0x9/0x10
[   10.152094]  [<ffffffff81567444>] entry_SYSCALL_64_fastpath+0x18/0x8c
[   10.152194] Code: 24 88 02 00 00 00 0f 84 93 fe ff ff 48 c7 c6 ff ff ff ff 49 8d 3e e8 f3 2e f4 e0 85 c0 0f 84 7c fe ff ff 49 8b 84 24 88 02 00 00 <48> c7 00 ff ff ff ff 48 c7 c6 ff ff ff ff 49 8d 3e e8 cd 2e f4 
[   10.155703] RIP  [<ffffffffa00c603d>] mpt_mapresources+0x23d/0x320 [mptbase]
[   10.156195]  RSP <ffff8800b1b0bad8>
[   10.156294] CR2: 00000000ffffffff
[   10.156393] ---[ end trace 87ee6328b24f46be ]---
 ... [FAILED]
:: Loading module mptctl[   10.158720] Fusion MPT misc device (ioctl) driver 3.04.20
[   10.159287] mptctl: Registered with Fusion MPT base driver
[   10.160162] mptctl: /dev/mptctl @ (major,minor=10,220)
 ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module megaraid_sas[   10.166335] megasas: 06.808.16.00-rc1
 ... [  OK  ]
:: Loading module mdio ... [  OK  ]
Insert net driver(Mindspeed only)...
[   10.177097] apollolake_synobios: module license 'Synology Inc.' taints kernel.
[   10.177761] /source/synobios/x64/../synobios.c(511) read RTC error
[   10.178674] 1900-1-0 0:0:0 UTC
[   10.179100] synobios: load, major number 201
[   10.179199] Brand: Synology
[   10.179298] Model: DS-918+
[   10.179398] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   10.180357] synobios cpu_arch proc entry initialized
[   10.180897] synobios crypto_hw proc entry initialized
[   10.181353] synobios syno_platform proc entry initialized
[   10.182099] synobios open /dev/ttyS1 success
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[   10.184669] synobios: unload
[   10.192192] md: Autodetecting RAID arrays.
[   10.193292] md: invalid raid superblock magic on sdb5
[   10.194079] md: sdb5 does not have a valid v0.90 superblock, not importing!
[   10.195102] md: Scanned 3 and added 2 devices.
[   10.195541] md: autorun ...
[   10.196004] md: considering sdb1 ...
[   10.196488] md:  adding sdb1 ...
[   10.196587] md: sdb2 has different UUID to sdb1
[   10.196652] md: created md0
[   10.197215] md: bind<sdb1>
[   10.197314] md: running: <sdb1>
[   10.197733] md/raid1:md0: active with 1 out of 12 mirrors
[   10.198348] md0: detected capacity change from 0 to 2549940224
[   10.199111] md: considering sdb2 ...
[   10.199674] md:  adding sdb2 ...
[   10.200337] md: created md1
[   10.200824] md: bind<sdb2>
[   10.201262] md: running: <sdb2>
[   10.203764] md/raid1:md1: active with 1 out of 12 mirrors
[   10.204532] md1: detected capacity change from 0 to 2147418112
[   10.205325] md: ... autorun DONE.
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0... 
/sbin/e2fsck -pvf returns 0
Mounting /dev/md0 /tmpRoot
[   10.267083] EXT4-fs (md0): barriers disabled
[   10.275361] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
------------upgrade
Begin upgrade procedure
Found an upgrade file on data volume. Begin upgrade
[   10.413176] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[   10.433420] random: nonblocking pool is initialized
[   10.547467] Got empty serial number. Generate serial number from product.
Checksum of system tarball verified.
/tmpRoot//usr/syno/etc/synoservice.d ==>    /tmpRoot/.syno/update_bkp//usr/syno/etc/synoservice.d/
/tmpRoot//usr/syno/etc/timebkp ==>    /tmpRoot/.syno/update_bkp//usr/syno/etc/timebkp/
/tmpRoot//var/run ==>    /tmpRoot/.syno/update_bkp//var/run/
/tmpRoot//etc/postgresql/user.conf.d ->	/tmpRoot/.upd@te_sub/etc/postgresql/user.conf.d/
/tmpRoot//etc ->	/tmpRoot/.upd@te/etc/
/tmpRoot//usr/syno/etc ->	/tmpRoot/.upd@te/usr/syno/etc/
/tmpRoot//var ->	/tmpRoot/.upd@te/var/
/tmpRoot//usr/syno/synoman/webman/3rdparty ->	/tmpRoot/.upd@te/usr/syno/synoman/webman/3rdparty/
/tmpRoot//usr/local ->	/tmpRoot/.upd@te/usr/local/
Removing /tmpRoot/.upd@te//etc/ftpusers...
Removing /tmpRoot/.upd@te//etc/rc...
Removing /tmpRoot/.upd@te//etc/rc.network...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.atalk...
Removing /tmpRoot/.upd@te//usr/syno/etc/.htpasswd...
Removing /tmpRoot/.upd@te//usr/syno/etc/lpd/lpd.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/printcap...
Removing /tmpRoot/.upd@te//usr/syno/etc/ups.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.users...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsmon.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upssched.conf...
Removing /tmpRoot/.upd@te//etc/lvm/lvm.conf...
Removing /tmpRoot/.upd@te//usr/local/etc/rc.d/SynoEnablePersonalServices.sh...
Removing /tmpRoot/.upd@te//etc/rc.network_routing...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.tun...
Removing /tmpRoot/.upd@te//usr/syno/etc/afpd.conf...
Removing /tmpRoot/.upd@te//etc/pam.d/samba...
Removing /tmpRoot/.upd@te//etc/ppp/ip-up...
Removing /tmpRoot/.upd@te//etc/ppp/ip-down...
Removing /tmpRoot/.upd@te//etc/ppp/ip-function...
Removing /tmpRoot/.upd@te//etc/ppp/ipv6-up...
Removing /tmpRoot/.upd@te//etc/ppp/ipv6-down...
Removing /tmpRoot/.upd@te//etc/ppp/options...
Removing /tmpRoot/.upd@te//usr/local/cups/mime.types...
Removing /tmpRoot/.upd@te//usr/local/cups/mime.convs...
Removing /tmpRoot/.upd@te//etc/cups/cupsd.conf...
Removing /tmpRoot/.upd@te//usr/local/cups/cupsd.conf...
Removing /tmpRoot/.upd@te//usr/local/cups/testprint...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/bannertops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/commandtops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/gziptoany...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetoraster...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/pdftops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/pstops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertoepson...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertohp...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertolabel...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertopwg...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/texttops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/hpgltops...
Removing /tmpRoot/.upd@te//etc/hostapd/stainfo.sh...
Removing /tmpRoot/.upd@te//etc/hostapd/mac_filter/mfscript.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/rfkill.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_guest_net.sh...
Removing /tmpRoot/.upd@te//etc/ld.so.preload...
Removing /tmpRoot/.upd@te//etc/tc/default.cmd...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcert.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcgikey.sh...
Removing /tmpRoot/.upd@te//etc/logrotate.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/wcdma_list.json...
Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/usb_modeswitch.d/*...
Removing /tmpRoot/.upd@te//etc/php/php.ini...
Removing /tmpRoot/.upd@te//etc/php/php-fpm.conf...
Removing /tmpRoot/.upd@te//etc/php/conf.d/opcache.ini...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/global.setting...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/system.cfg...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssdp/dsm_desc.xml...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_time_ctrl.sh...
Removing /tmpRoot/.upd@te//etc/profile...
Removing /tmpRoot/.upd@te//etc/inputrc...
Removing /tmpRoot/.upd@te//etc/dhclient/dhclient-script...
Removing /tmpRoot/.upd@te//etc/dhclient/ipv4/dhclient.conf...
Removing /tmpRoot/.upd@te//etc/dhclient/ipv6/dhclient.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/www/SSLProfile.json...
Removing /tmpRoot/.upd@te//etc/vimrc...
Removing /tmpRoot/.upd@te//usr/syno/etc/cacert.pem...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_modules_list...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_chain_list...
Removing /tmpRoot/.upd@te//usr/local/bin/python*...
Removing /tmpRoot/.upd@te//etc/sudoers...
Removing /tmpRoot/.upd@te//usr/syno/etc/openldap/ldap.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/autoupdate.notify...
Removing /tmpRoot/.upd@te//etc/pam.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/vfs...
Removing /tmpRoot/.upd@te//var/run...
Removing /tmpRoot/.upd@te//var/state/ups...
Removing /tmpRoot/.upd@te//usr/syno/etc/ups...
Removing /tmpRoot/.upd@te//var/spool/postfix...
Removing /tmpRoot/.upd@te//usr/local/cups/backend...
Removing /tmpRoot/.upd@te//usr/local/cups/mime...
Removing /tmpRoot/.upd@te//etc/fw_security/sysconf...
Removing /tmpRoot/.upd@te//etc/init...
Removing /tmpRoot/.upd@te//etc/logrotate.d...
Removing /tmpRoot/.upd@te//etc/syslog-ng...
Removing /tmpRoot/.upd@te//var/lib/dpkg...
Removing /tmpRoot/.upd@te//etc/httpd/conf...
Removing /tmpRoot/.upd@te//etc/postgresql...
Removing /tmpRoot/.upd@te//etc/nginx...
Removing /tmpRoot/.upd@te//etc/wide-dhcpv6...
Removing /tmpRoot/.upd@te//etc/apparmor.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d...
Removing /tmpRoot/.upd@te//var/dynlib...
Removing /tmpRoot/.upd@te//etc/iproute2/script...
Removing /tmpRoot/.upd@te//etc/ssl/certs...
Removing /tmpRoot/.upd@te//etc/dbus-1...
Removing /tmpRoot/.upd@te//usr/syno/etc/dbus-1...
Removing /tmpRoot/.upd@te//etc/avahi...
Removing /tmpRoot/.upd@te//usr/syno/etc/synovpnclient/scripts...
Removing /tmpRoot/.upd@te//var/lib/apparmor...
Removing /tmpRoot/.upd@te//usr/syno/etc/www/app.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/bluetooth/...
Removing /tmpRoot/.upd@te//usr/syno/etc/smallupdate_patch...
Removing /tmpRoot/.upd@te//etc/ImageMagick-6...
Removing /tmpRoot/.upd@te//usr/syno/etc/logcollector...
Removing /tmpRoot/.upd@te//var/cache/texts...
chmod: /tmpRoot/.upd@te/root: No such file or directory
Setting up swapspace version 1, size = 2147414016 bytes
[   11.237793] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
Untaring /tmpRoot/.SynoUpgrade.tar...
[   14.015705] /source/synobios/x64/../synobios.c(511) read RTC error
[   14.016754] 1900-1-0 0:0:0 UTC
[   14.017280] synobios: load, major number 201
[   14.018001] Brand: Synology
[   14.018581] Model: DS-918+
[   14.019134] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   14.020602] synobios cpu_arch proc entry initialized
[   14.021441] synobios crypto_hw proc entry initialized
[   14.022295] synobios syno_platform proc entry initialized
[   14.023205] synobios open /dev/ttyS1 success
mknod: /dev/synobios: File exists
Starting /usr/syno/bin/synohdcfgen...
/usr/syno/bin/synohdcfgen returns 0
[   14.028515] synobios: unload
End upgrade procedure
============upgrade
Wait 2 seconds for synology manufactory device
Wed Aug 29 09:03:53 UTC 2018
/dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=2010504k,nr_inodes=502626,mode=755 0 0
proc /proc proc rw,relatime 0 0

linuxrc.syno executed successfully.
Post init
[   19.598641] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
fgrep: /tmpRoot/etc/rc: No such file or directory
/tmpRoot/usr/bin/sed: can't read /tmpRoot/etc/rc: No such file or directory
Installing /tmpRoot//usr/lib/modules/update/BusLogic.ko...
Installing /tmpRoot//usr/lib/modules/update/vmw_pvscsi.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_mm.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_mbox.ko...
Installing /tmpRoot//usr/lib/modules/update/scsi_transport_spi.ko...
Installing /tmpRoot//usr/lib/modules/update/mptbase.ko...
Installing /tmpRoot//usr/lib/modules/update/mptscsih.ko...
Installing /tmpRoot//usr/lib/modules/update/mptspi.ko...
Installing /tmpRoot//usr/lib/modules/update/mptctl.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_sas.ko...
Installing /tmpRoot//usr/lib/modules/update/mdio.ko...
Installing /tmpRoot//usr/lib/modules/update/mii.ko...
Installing /tmpRoot//usr/lib/modules/update/libphy.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1e.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1c.ko...
Installing /tmpRoot//usr/lib/modules/update/alx.ko...
Installing /tmpRoot//usr/lib/modules/update/uio.ko...
Installing /tmpRoot//usr/lib/modules/update/jme.ko...
Installing /tmpRoot//usr/lib/modules/update/skge.ko...
Installing /tmpRoot//usr/lib/modules/update/sky2.ko...
Installing /tmpRoot//usr/lib/modules/update/qla3xxx.ko...
Installing /tmpRoot//usr/lib/modules/update/qlcnic.ko...
Installing /tmpRoot//usr/lib/modules/update/qlge.ko...
Installing /tmpRoot//usr/lib/modules/update/netxen_nic.ko...
Installing /tmpRoot//usr/lib/modules/update/sfc.ko...
Installing /tmpRoot//usr/lib/modules/update/e1000.ko...
Installing /tmpRoot//usr/lib/modules/update/pcnet32.ko...
Installing /tmpRoot//usr/lib/modules/update/vmxnet3.ko...
Installing /tmpRoot//usr/lib/modules/update/bnx2.ko...
Installing /tmpRoot//usr/lib/modules/update/cnic.ko...
Installing /tmpRoot//usr/lib/modules/update/ixgbe.ko...
Installing /tmpRoot//usr/lib/modules/update/r8168.ko...
Installing /tmpRoot//usr/lib/modules/update/r8169.ko...
Installing /tmpRoot//usr/lib/modules/update/tg3.ko...
Installing /tmpRoot//usr/lib/modules/update/usbnet.ko...
Installing /tmpRoot//usr/lib/modules/update/ax88179_178a.ko...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-09ax-6.0.17.fw...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-09-6.0.17.fw...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-06-6.0.15.fw...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3_tso5.bin...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3_tso.bin...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3.bin...

[   19.789627] EXT4-fs (md0): re-mounted. Opts: (null)
[   21.993846] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   21.994862] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   21.995869] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   22.128232] md1: detected capacity change from 2147418112 to 0
[   22.129248] md: md1: set sdb2 to auto_remap [0]
[   22.130032] md: md1 stopped.
[   22.130541] md: unbind<sdb2>
[   22.135699] md: export_rdev(sdb2)
[   22.282253] md: bind<sdb2>
[   22.283166] md/raid1:md1: active with 1 out of 12 mirrors
[   22.284188] md1: detected capacity change from 0 to 2147418112
[   22.292869] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   22.322633] zram: Added device: zram0
[   22.323537] zram: Added device: zram1
[   22.324368] zram: Added device: zram2
[   22.325198] zram: Added device: zram3
[   22.327118] zram0: detected capacity change from 0 to 621805568
[   22.330890] Adding 607228k swap on /dev/zram0.  Priority:1 extents:1 across:607228k SS
[   22.333058] zram1: detected capacity change from 0 to 621805568
[   22.336909] Adding 607228k swap on /dev/zram1.  Priority:1 extents:1 across:607228k SS
[   22.339098] zram2: detected capacity change from 0 to 621805568
[   22.343297] Adding 607228k swap on /dev/zram2.  Priority:1 extents:1 across:607228k SS
[   22.345509] zram3: detected capacity change from 0 to 621805568
[   22.349422] Adding 607228k swap on /dev/zram3.  Priority:1 extents:1 across:607228k SS
==================== start udevd ====================
[   23.962281] NET: Registered protocol family 10
[   23.968466] sit: IPv6 over IPv4 tunneling driver
[   24.046353] init: syno-auth-check main process (6962) killed by TERM signal
[   24.391363] AVX2 version of gcm_enc/dec engaged.
[   24.392164] AES CTR mode by8 optimization enabled
[   24.402989] fuse init (API version 7.23)
[   24.414420] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[   24.415471] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[   24.416968] e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   24.526463] e1000e 0000:0b:00.0 eth0: registered PHC clock
[   24.527437] e1000e 0000:0b:00.0 eth0: (PCI Express:2.5GT/s:Width x1) [MAC REDACTED]
[   24.529224] e1000e 0000:0b:00.0 eth0: Intel(R) PRO/1000 Network Connection
[   24.530605] e1000e 0000:0b:00.0 eth0: MAC: 3, PHY: 8, PBA No: 000000-000
[   24.539108] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[   24.540383] Copyright (c) 2007-2015 Intel Corporation.
[   24.545121] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[   24.546539] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[   24.552054] r8168: Unknown symbol pci_disable_link_state (err 0)
[   24.587742] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   24.589044] ACPI: Power Button [PWRF]
[   24.596912] Linux agpgart interface v0.103
[   26.007539] systemd-udevd[7581]: starting version 204
===== trigger device plug event =====
[H[J[1;1H[?25l[m[H[J[1;1H[2;20HGNU GRUB  version 2.02~beta2-36ubuntu3.14

[m[4;2H+----------------------------------------------------------------------------+[5;2H|[5;79H|[6;2H|[6;79H|[7;2H|[7;79H|[8;2H|[8;79H|[9;2H|[9;79H|[10;2H|[10;79H|[11;2H|[11;79H|[12;2H|[12;79H|[13;2H|[13;79H|[14;2H|[14;79H|[15;2H|[15;79H|[16;2H|[16;79H|[17;2H+----------------------------------------------------------------------------+[m[18;2H[19;2H[m     Use the ^ and v keys to select which entry is highlighted.          
      Press enter to boot the selected OS, `e' to edit the commands       
      before booting or `c' for a command-line.                           [5;80H [7m[5;3H*DS918+ 6.2 Baremetal with Jun's Mod v1.03a                                 [m[5;78H[m[m[6;3H DS918+ 6.2 Baremetal with Jun's Mod v1.03a Reinstall                       [m[6;78H[m[m[7;3H DS918+ 6.2 VMWare/ESXI with Jun's Mod v1.03a                               [m[7;78H[m[m[8;3H                                                                            [m[8;78H[m[m[9;3H                                                                            [m[9;78H[m[m[10;3H                                                                            [m[10;78H[m[m[11;3H                                                                            [m[11;78H[m[m[12;3H                                                                            [m[12;78H[m[m[13;3H                                                                            [m[13;78H[m[m[14;3H                                                                            [m[14;78H[m[m[15;3H                                                                            [m[15;78H[m[m[16;3H                                                                            [m[16;78H[m[16;80H [5;78H[22;1H   The highlighted entry will be executed automatically in 1s.                 [5;78H[22;1H   The highlighted entry will be executed automatically in 0s.                 [5;78H[?25h[H[J[1;1H[H[J[1;1H[H[J[1;1H[H[J[1;1H[    1.870117] ata4: No present pin info for SATA link down event
[    2.176100] ata5: No present pin info for SATA link down event
[    2.482192] ata6: No present pin info for SATA link down event
[    2.788309] ata7: No present pin info for SATA link down event
[    3.094370] ata8: No present pin info for SATA link down event
[    3.400408] ata9: No present pin info for SATA link down event
[    3.706841] ata10: No present pin info for SATA link down event
[    4.012479] ata11: No present pin info for SATA link down event
[    4.318626] ata12: No present pin info for SATA link down event
[    4.624643] ata13: No present pin info for SATA link down event
[    4.930750] ata14: No present pin info for SATA link down event
[    5.236760] ata15: No present pin info for SATA link down event
[    5.542806] ata16: No present pin info for SATA link down event
[    5.848978] ata17: No present pin info for SATA link down event
[    6.154959] ata18: No present pin info for SATA link down event
[    6.461064] ata19: No present pin info for SATA link down event
[    6.767129] ata20: No present pin info for SATA link down event
[    7.073164] ata21: No present pin info for SATA link down event
[    7.379259] ata22: No present pin info for SATA link down event
[    7.685240] ata23: No present pin info for SATA link down event
[    7.991363] ata24: No present pin info for SATA link down event
[    8.297443] ata25: No present pin info for SATA link down event
[    8.603506] ata26: No present pin info for SATA link down event
[    8.909484] ata27: No present pin info for SATA link down event
[    9.215632] ata28: No present pin info for SATA link down event
[    9.521692] ata29: No present pin info for SATA link down event
[    9.827674] ata30: No present pin info for SATA link down event
patching file etc/rc
patching file etc/synoinfo.conf
Hunk #2 FAILED at 266.
Hunk #3 FAILED at 311.
2 out of 3 hunks FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
Hunk #3 succeeded at 552 (offset 1 line).
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi[   10.124440] BUG: unable to handle kernel paging request at 00000000ffffffff
[   10.124958] IP: [<ffffffffa00c603d>] mpt_mapresources+0x23d/0x320 [mptbase]
[   10.125053] PGD b9de1067 PUD 0 
[   10.125958] Oops: 0002 [#1] PREEMPT SMP 
[   10.126201] Modules linked in: mptspi(E+) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd ohci_hcd(E) usbcore usb_common p(OE)
[   10.127841] CPU: 3 PID: 4886 Comm: insmod Tainted: G           OE   4.4.59+ #23824
[   10.128842] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[   10.129842] task: ffff8800b92710c0 ti: ffff8800b9e0c000 task.ti: ffff8800b9e0c000
[   10.130842] RIP: 0010:[<ffffffffa00c603d>]  [<ffffffffa00c603d>] mpt_mapresources+0x23d/0x320 [mptbase]
[   10.131842] RSP: 0018:ffff8800b9e0fad8  EFLAGS: 00010202
[   10.132960] RAX: 00000000ffffffff RBX: ffff8800b8d28000 RCX: 0000000000000000
[   10.133960] RDX: 0000000000000000 RSI: ffffffffffffffff RDI: ffff8800bba75098
[   10.134753] RBP: ffff8800b9e0fb00 R08: ffff8800bba75420 R09: 0000000000000000
[   10.134873] R10: ffff880137a813c0 R11: 0000000000000000 R12: ffff8800bba75000
[   10.135960] R13: 0000000000000000 R14: ffff8800bba75098 R15: ffff8800b8d28000
[   10.136878] FS:  00007f4c2ef5c700(0000) GS:ffff88013fcc0000(0000) knlGS:0000000000000000
[   10.137748] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   10.137990] CR2: 00000000ffffffff CR3: 00000000b90ca000 CR4: 00000000003606f0
[   10.138954] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   10.139718] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   10.139844] Stack:
[   10.140741]  ffff8800bba75000 ffffffffa00e4780 ffff8800bba75000 ffffffffa00e4780
[   10.140863]  ffff8800b8d28000 ffff8800b9e0fb60 ffffffffa00cb0b3 00000004811a94cf
[   10.141844]  00000000b9e0fb38 ffff8800b857feb0 ffff8800b8d28008 ffff8800bba0c5c8
[   10.142844] Call Trace:
[   10.153501]  [<ffffffffa00cb0b3>] mpt_attach+0x83/0xc30 [mptbase]
[   10.153964]  [<ffffffffa00e2c58>] mptspi_probe+0x18/0x390 [mptspi]
[   10.154721]  [<ffffffff8138decd>] ? __pm_runtime_resume+0x4d/0x60
[   10.154964]  [<ffffffff812fc85c>] pci_device_probe+0x8c/0x100
[   10.155721]  [<ffffffff813842d1>] driver_probe_device+0x1f1/0x310
[   10.155964]  [<ffffffff81384472>] __driver_attach+0x82/0x90
[   10.156721]  [<ffffffff813843f0>] ? driver_probe_device+0x310/0x310
[   10.156847]  [<ffffffff81382361>] bus_for_each_dev+0x61/0xa0
[   10.157965]  [<ffffffff81383d69>] driver_attach+0x19/0x20
[   10.158722]  [<ffffffff81383993>] bus_add_driver+0x1b3/0x230
[   10.158965]  [<ffffffffa00e7000>] ? 0xffffffffa00e7000
[   10.159060]  [<ffffffff81384c7b>] driver_register+0x5b/0xe0
[   10.159965]  [<ffffffff812fb337>] __pci_register_driver+0x47/0x50
[   10.160060]  [<ffffffffa00e70dc>] mptspi_init+0xdc/0xfa [mptspi]
[   10.160966]  [<ffffffff810003b6>] do_one_initcall+0x86/0x1b0
[   10.161060]  [<ffffffff810dfdd8>] do_init_module+0x56/0x1be
[   10.161966]  [<ffffffff810b61ad>] load_module+0x1ded/0x2070
[   10.162060]  [<ffffffff810b3510>] ? __symbol_put+0x50/0x50
[   10.162966]  [<ffffffff81113b35>] ? map_vm_area+0x35/0x50
[   10.163730]  [<ffffffff81114e7c>] ? __vmalloc_node_range+0x13c/0x240
[   10.163854]  [<ffffffff810b64b8>] ? SYSC_init_module+0x88/0x110
[   10.164966]  [<ffffffff810b652f>] SYSC_init_module+0xff/0x110
[   10.165789]  [<ffffffff810b65c9>] SyS_init_module+0x9/0x10
[   10.166031]  [<ffffffff81567444>] entry_SYSCALL_64_fastpath+0x18/0x8c
[   10.166818] Code: 24 88 02 00 00 00 0f 84 93 fe ff ff 48 c7 c6 ff ff ff ff 49 8d 3e e8 f3 2e f4 e0 85 c0 0f 84 7c fe ff ff 49 8b 84 24 88 02 00 00 <48> c7 00 ff ff ff ff 48 c7 c6 ff ff ff ff 49 8d 3e e8 cd 2e f4 
[   10.169967] RIP  [<ffffffffa00c603d>] mpt_mapresources+0x23d/0x320 [mptbase]
[   10.170780]  RSP <ffff8800b9e0fad8>
[   10.171022] CR2: 00000000ffffffff
[   10.171265] ---[ end trace 429293de3f2c80f2 ]---
 ... [FAILED]
:: Loading module mptctl[   10.173964] Fusion MPT misc device (ioctl) driver 3.04.20
[   10.174779] mptctl: Registered with Fusion MPT base driver
[   10.175677] mptctl: /dev/mptctl @ (major,minor=10,220)
 ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module megaraid_sas[   10.181949] megasas: 06.808.16.00-rc1
 ... [  OK  ]
:: Loading module mdio ... [  OK  ]
Insert net driver(Mindspeed only)...
[   10.192730] apollolake_synobios: module license 'Synology Inc.' taints kernel.
[   10.194028] /source/synobios/x64/../synobios.c(511) read RTC error
[   10.195050] 1900-1-0 0:0:0 UTC
[   10.195417] synobios: load, major number 201
[   10.195984] Brand: Synology
[   10.196226] Model: DS-918+
[   10.196469] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   10.196985] synobios cpu_arch proc entry initialized
[   10.197078] synobios crypto_hw proc entry initialized
[   10.197987] synobios syno_platform proc entry initialized
[   10.198080] synobios open /dev/ttyS1 success
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[   10.201333] synobios: unload
[   10.207624] md: Autodetecting RAID arrays.
[   10.208177] md: invalid raid superblock magic on sdb5
[   10.208993] md: sdb5 does not have a valid v0.90 superblock, not importing!
[   10.210062] md: Scanned 3 and added 2 devices.
[   10.210674] md: autorun ...
[   10.211034] md: considering sdb1 ...
[   10.211633] md:  adding sdb1 ...
[   10.211792] md: sdb2 has different UUID to sdb1
[   10.212035] md: created md0
[   10.212277] md: bind<sdb1>
[   10.212334] md: running: <sdb1>
[   10.213444] md/raid1:md0: active with 1 out of 12 mirrors
[   10.214249] md0: detected capacity change from 0 to 2549940224
[   10.215016] md: considering sdb2 ...
[   10.215624] md:  adding sdb2 ...
[   10.216010] md: created md1
[   10.216503] md: bind<sdb2>
[   10.216890] md: running: <sdb2>
[   10.218954] md/raid1:md1: active with 1 out of 12 mirrors
[   10.219658] md1: detected capacity change from 0 to 2147418112
[   10.220005] md: ... autorun DONE.
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0... 
/sbin/e2fsck -pvf returns 1
Mounting /dev/md0 /tmpRoot
[   10.298669] EXT4-fs (md0): barriers disabled
[   10.306936] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
------------upgrade
Begin upgrade procedure
No upgrade file exists
End upgrade procedure
============upgrade
Wait 2 seconds for synology manufactory device
[   10.407797] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[   10.543719] Got empty serial number. Generate serial number from product.
Wed Aug 29 09:06:30 UTC 2018
/dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0
[   15.030934] random: nonblocking pool is initialized
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=2010504k,nr_inodes=502626,mode=755 0 0
proc /proc proc rw,relatime 0 0

linuxrc.syno executed successfully.
Post init
[   15.185144] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1

[   15.625325] EXT4-fs (md0): re-mounted. Opts: (null)
[   17.234737] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.235739] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   17.236728] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   17.366662] md1: detected capacity change from 2147418112 to 0
[   17.367673] md: md1: set sdb2 to auto_remap [0]
[   17.368458] md: md1 stopped.
[   17.368962] md: unbind<sdb2>
[   17.373504] md: export_rdev(sdb2)
[   17.506024] md: bind<sdb2>
[   17.506958] md/raid1:md1: active with 1 out of 12 mirrors
[   17.507984] md1: detected capacity change from 0 to 2147418112
[   17.514896] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[   17.547559] zram: Added device: zram0
[   17.548381] zram: Added device: zram1
[   17.549233] zram: Added device: zram2
[   17.550081] zram: Added device: zram3
[   17.552067] zram0: detected capacity change from 0 to 621805568
[   17.555849] Adding 607228k swap on /dev/zram0.  Priority:1 extents:1 across:607228k SS
[   17.557992] zram1: detected capacity change from 0 to 621805568
[   17.561502] Adding 607228k swap on /dev/zram1.  Priority:1 extents:1 across:607228k SS
[   17.563596] zram2: detected capacity change from 0 to 621805568
[   17.567107] Adding 607228k swap on /dev/zram2.  Priority:1 extents:1 across:607228k SS
[   17.569401] zram3: detected capacity change from 0 to 621805568
[   17.572917] Adding 607228k swap on /dev/zram3.  Priority:1 extents:1 across:607228k SS
==================== start udevd ====================
[   18.023363] NET: Registered protocol family 10
[   18.030178] sit: IPv6 over IPv4 tunneling driver
[   18.456638] init: syno-auth-check main process (6326) killed by TERM signal
[   18.578503] AVX2 version of gcm_enc/dec engaged.
[   18.579304] AES CTR mode by8 optimization enabled
[   18.590803] fuse init (API version 7.23)
[   18.602378] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[   18.603532] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[   18.605116] e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   18.711269] e1000e 0000:0b:00.0 eth0: registered PHC clock
[   18.712384] e1000e 0000:0b:00.0 eth0: (PCI Express:2.5GT/s:Width x1) [MAC REDACTED]
[   18.713735] e1000e 0000:0b:00.0 eth0: Intel(R) PRO/1000 Network Connection
[   18.715064] e1000e 0000:0b:00.0 eth0: MAC: 3, PHY: 8, PBA No: 000000-000
[   18.724386] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[   18.725530] Copyright (c) 2007-2015 Intel Corporation.
[   18.729492] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[   18.730822] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[   18.735702] r8168: Unknown symbol pci_disable_link_state (err 0)
[   18.765164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   18.766435] ACPI: Power Button [PWRF]
[   18.780455] Linux agpgart interface v0.103
[   20.039316] systemd-udevd[6796]: starting version 204
===== trigger device plug event =====

 

 

Edited by Polanskiman
Added log to new spoiler.

Share this post


Link to post
Share on other sites
On 8/8/2018 at 8:47 AM, Next said:

Hi,

 

Made the USB drive 1.03B but when booting I can't find the Synology looks like no network connection.

Somebody have a solution for it? Its a baremetal Synology.

 

Same here. DS3615xs Xpenology runs without problems at 1.02b loader but as soon as I boot the 1.03 Loader with identical settings (Serial, Mac address), I can't find it in my network.
Use a Gigabyte H97N with GbE Intel and Atheros LAN. Are there no drivers for the LAN adapters yet?

 

czekow

Share this post


Link to post
Share on other sites

Maybe someone can help me. I have one successful install using 1.03b and is currently running the most update version of DSM. This is on a Dell r510 baremetal install my other R510 will not work with loader 1.03b. of course i changed the mac addresses and installed a new serial # for the 2nd 510 as well. The only hardware difference in different size ram. One ( the working one) has 24gb of memory and the other has 32. also the working one is using a h200 raid card flashed in IT mode where the none working is using a H700 unknown FW version.

Not sure if this helps but I'm noticing my nics are blinking and registering they have connection to my network but i can not find the Mac address on my router to pull a IP.

Share this post


Link to post
Share on other sites
20 hours ago, AMeggs said:

Maybe someone can help me. I have one successful install using 1.03b and is currently running the most update version of DSM. This is on a Dell r510 baremetal install my other R510 will not work with loader 1.03b. of course i changed the mac addresses and installed a new serial # for the 2nd 510 as well. The only hardware difference in different size ram. One ( the working one) has 24gb of memory and the other has 32. also the working one is using a h200 raid card flashed in IT mode where the none working is using a H700 unknown FW version.

Not sure if this helps but I'm noticing my nics are blinking and registering they have connection to my network but i can not find the Mac address on my router to pull a IP.

Try adding a Intel Dual lan card, that worked for me on my Dell R410.  It's  a driver issue till they add the extra.lzma .

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now