ideasman69 Posted October 22, 2018 Share #576 Posted October 22, 2018 On 8/14/2018 at 11:09 PM, modboxx said: You guys should look over your bios settings, I have a j3455M with two extra ahci cards, two ports per a card(using 5 of the 6 ports) and I do not have of these issues. Bios (1.80 spectre/meltdown) CPU config: Intel SpeedStep = disabled - No driver (Slows and crashes system) CPU C States = disabled intel vt-d = enabled PowerGear = Sport (Buttery smooth Plex) Chipset Configuration: Adjust your memory speed and voltage, don't leave it on auto. Share Memory = 64 Onboard HD Audio = Disabled ACPI Configuration: Suspend to RAM = disabled RTC Alarm Power On = disabled (DSM can't read RTC Clock so doubt this would work, best to disable for now) USB Configuration: Legacy USB Support = UEFI only Trusted Computing: Disable all Security Screen: Secure Boot = Disabled Intel(R) Platform Trust Technology = Disabled Boot Screen: CSM (Compatibility Support Module) = Disabled Some additional notes. Goto /etc.defaults/synoinfo.conf support_led_brightness_adjustment="no" that should fix your ahci_led stuff support_fan="no" support_spectre_meltdown_mitigation="yes" (Check bottom) if your on bios 1.80(j3455m) or which ever version that fixes the spectre/meldown for the j3455*-itx model Plex does hw transcoding every time I use it, never had to reboot it, do you guys have plex pass? hell yeah! i've got another J3455-ITX board coming in a couple days and look forward to trying out your suggestions. thanks man Quote Link to comment Share on other sites More sharing options...
Profiler64 Posted October 22, 2018 Share #577 Posted October 22, 2018 On 10/21/2018 at 10:00 PM, FiberInternetUser said: After upgrading to jun's lastest 918+ boot loader 1.04b, ASRock J3455-ITX motherboard does not perform a graceful shutdown. Can't perform a reboot from the DSM GUI as It hangs on shutdown. I have the same Problem. And the /dev/dir folder disappered. Quote Link to comment Share on other sites More sharing options...
waazdakka Posted October 22, 2018 Share #578 Posted October 22, 2018 @Polanskiman I assume it's stupid to think about moving from DS3615 to DS918 to get the last loader ? (Or have to make a fresh install ;) ) Quote Link to comment Share on other sites More sharing options...
franky52 Posted October 22, 2018 Share #579 Posted October 22, 2018 First of alll, thanks Jun for all your work. It’s incredible we can use DSM with our servers. I’ve installed the loader in 2 different computers, both of them baremetal: in my own server (Supermicro X11SHF-4LNF & i3 6300) and in an intel NUC5i3RYH (i3 5010U) On both them I get everything working (even the M.2 SSD attached to the nuc). I’m also able to transcode with Plex Pass (/dev/dri present on both systems), but after a couple of minutes, both computers crashed. I’ve repeated the same procedure several times with the same result... crash and I have to reset the system. I know for sure that transcode works on both, as I tested them with a clean install of Debian Stretch and I get hardware acceleration. As the i915 driver has changed since the last version, is there any chance we can try different versions of the driver for testing? Quote Link to comment Share on other sites More sharing options...
agent47SG1 Posted October 22, 2018 Share #580 Posted October 22, 2018 Thanks for you great work Jun !! Anyone heard something about DSM dematerialized license (https://www.nextinpact.com/news/107155-entretienavecsynologyfrance-10gbe-cpu-plus-puissants-ryzen-licence-dsm-suivi-services.htm) ? Quote Link to comment Share on other sites More sharing options...
Jeong Posted October 23, 2018 Share #581 Posted October 23, 2018 (edited) First of all, Thanks Jun for all your work. And I regret my poor English. While using J4205 system, I'm also getting the same error that shows "does not exist /dev/dri" In addition, power does not turn off automatically when shutting down the system Attempted to use passthrough through ESXi, but J4205 does not support passthrough. In version 1.03a2, /dev/dri existed, but the system was very unstable and writes very slowly. Will you please provide solution for this problem? Thank you Edited October 23, 2018 by Jeong 1 Quote Link to comment Share on other sites More sharing options...
foyun Posted October 23, 2018 Share #582 Posted October 23, 2018 Thank you ..... Quote Link to comment Share on other sites More sharing options...
Mixpower Posted October 23, 2018 Share #583 Posted October 23, 2018 Thank you Jun! But with my Gen8 Baremetal Synology is not detected in the network, even with the reinstall option there is nothing. Quote Link to comment Share on other sites More sharing options...
abced Posted October 23, 2018 Share #584 Posted October 23, 2018 Is DS918+ version still suitable for N3150 cpu as it was 916+? Quote Link to comment Share on other sites More sharing options...
Hostilian Posted October 23, 2018 Share #585 Posted October 23, 2018 17 hours ago, waazdakka said: @Polanskiman I assume it's stupid to think about moving from DS3615 to DS918 to get the last loader ? (Or have to make a fresh install ) Not only that but you get a much more recent Kernel.. 4.x as opposed to 3.x.. Annoying as it's not going to work on my Ivy Bridge ESXi.. It needs Haswell or later.. I'd test the upgrade using another hard drive and different flash drive first though.. (Disconnect all your currrent HDDs and don't use your current USB stick..) Quote Link to comment Share on other sites More sharing options...
sirotkaslo Posted October 23, 2018 Share #586 Posted October 23, 2018 (edited) My J3455B was always freezing after the first reset. Today I decided to try your 1.04 loader and i didn't even have to reinstall, it just came online after startup! Just finished installation and all is up and running. Thank you! EDIT: I'm running 6.2-23739, can I update to .23824? Thanks Edited October 23, 2018 by sirotkaslo Quote Link to comment Share on other sites More sharing options...
nabil Posted October 24, 2018 Share #587 Posted October 24, 2018 Thank you Thank you Thank you Quote Link to comment Share on other sites More sharing options...
mrjay Posted October 24, 2018 Share #588 Posted October 24, 2018 (edited) On 10/23/2018 at 12:15 AM, waazdakka said: @Polanskiman I assume it's stupid to think about moving from DS3615 to DS918 to get the last loader ? (Or have to make a fresh install ) maybe stupid question. HP Microserver Gen8 E3-1220l V2 CPU with Xpenology baremetal. should i stay on 1.03b or i can move to 1.04b? Edited October 24, 2018 by mrjay Quote Link to comment Share on other sites More sharing options...
wenderfit Posted October 24, 2018 Share #589 Posted October 24, 2018 22 часа назад, sirotkaslo сказал: can I update to .23824? yes. no problem after reboot. Quote Link to comment Share on other sites More sharing options...
ziorufus Posted October 24, 2018 Share #590 Posted October 24, 2018 Is there any chance to have DSM 6.2 working on a hp N36L (AMD processor)? I tried every version from 1.03b to 1.04b without luck. The last working version is 1.02b with DSM 6.1. Quote Link to comment Share on other sites More sharing options...
Bose321 Posted October 24, 2018 Share #591 Posted October 24, 2018 (edited) I'm running on 6.1.7 on a VMWare Workstation install. Can I just reboot with 1.03 or 1.04 and upgrade to 6.2 via DSM directly? Or should I try via the .pat file, or isn't it this easy at all? Right now I have a 3615xs. But there is no loader for that on 1.04? Edited October 24, 2018 by Bose321 Quote Link to comment Share on other sites More sharing options...
ma20at Posted October 25, 2018 Share #592 Posted October 25, 2018 (edited) thanks a lot, 1.04b is working fine with KVM on ubuntu18.10, the e1000 vNIC comes back again. Edited October 25, 2018 by ma20at Quote Link to comment Share on other sites More sharing options...
Mitja Posted October 25, 2018 Share #593 Posted October 25, 2018 I’m running DSM 6.1.7 with Jun’s loader 1.02b DS3615xs without a problem on HP EliteDesk 8200, i5-2500, NIC Intel 82579LM. When trying to boot with Jun’s 1.03b DS3615xs baremetal the usual loader screen shows up, but I can not find NAS in the network (with find.synology.com or Synology Assistent). Neither I can ping it. Looks like network does not come up. New loader has same settings in grub like previous one. 1.03b loader boots in UEFI mode. I tried booting in Legacy mode, but withot success (black screen only with no text). Any idea how to solve this? Is there a way to see some log where errors can be seen? Quote Link to comment Share on other sites More sharing options...
Aidan Posted October 25, 2018 Share #594 Posted October 25, 2018 When I installed Synology 6.2 on my baremetal using 1.03a2 DS918+, I experienced failure of rebooting. So I moved back to 6.1.7 using 1.02b DS916+. Is the issue solved in the 1.04b? System configuration: CPU : i3-8100 M/B : Gigabyte B360N Wifi NIC : 2 Intel NIC Quote Link to comment Share on other sites More sharing options...
moretty Posted October 25, 2018 Share #595 Posted October 25, 2018 (edited) El 1/8/2018 a las 16:30, Dfds dijo: @jun Una nueva instalación de baremetal en un HP Microserver Gen7 N54L parece estar funcionando bien. Muchas gracias por tu arduo trabajo. Hago un nuevo usb en mi n54l y no puedo verlo en lan.😢 Edited October 25, 2018 by moretty Quote Link to comment Share on other sites More sharing options...
ziorufus Posted October 25, 2018 Share #596 Posted October 25, 2018 1 minute ago, moretty said: Hago un nuevo usb en mi n54l y no puedo verlo en lan.😢 I have the same problem on my N36L. Quote Link to comment Share on other sites More sharing options...
ideasman69 Posted October 25, 2018 Share #597 Posted October 25, 2018 (edited) On 10/22/2018 at 1:10 PM, ideasman69 said: hell yeah! i've got another J3455-ITX board coming in a couple days and look forward to trying out your suggestions. thanks man nope - even with all of @modboxx's advice over here, system still runs slow i've got 3 different models of these boards (J3455-M, J3455B-ITX and J3455-ITX) but they all run slow with either of the 918+ boot images. So im not sure how you are the only one on here with one of these boards and no issues 😕 the activation.conf file doesn't exist with the latest boot loader and 6.2.1, whereas it did with the previous boot loader and 6.2. hardware transcoding in video station doesn't seem to work at all now? i have plex pass but it's not even worth touching that until it's working in video station. it'd be awesome if @jun could mention what type of motherboard his testing this stuff on and what his bios suggestions are. might help a lot of us! Edited October 25, 2018 by ideasman69 3 Quote Link to comment Share on other sites More sharing options...
benok Posted October 25, 2018 Share #598 Posted October 25, 2018 5 hours ago, Mitja said: I’m running DSM 6.1.7 with Jun’s loader 1.02b DS3615xs without a problem on HP EliteDesk 8200, i5-2500, ... Is there a way to see some log where errors can be seen? You can use serial console. EliteDesk has a serial port. Buy a USB serial cable and connect HP and another PC with that. You can see some boot log and can use serial console using some serial terminal app like Putty. I guess, if you disable serial port on BIOS, that might stop booting. I've once experienced that on a VM without serial port. Quote Link to comment Share on other sites More sharing options...
sirotkaslo Posted October 25, 2018 Share #599 Posted October 25, 2018 52 minutes ago, ideasman69 said: nope - even with all of @modboxx's advice over here, system still runs slow i've got 3 different models of these boards (J3455-M, J3455B-ITX and J3455-ITX) but they all run slow with either of the 918+ boot images. So im not sure how you are the only one on here with one of these boards and no issues 😕 the activation.conf file doesn't exist with the latest boot loader and 6.2.1, whereas it did with the previous boot loader and 6.2. hardware transcoding in video station doesn't seem to work at all now? i have plex pass but it's not even worth touching that until it's working in video station. it'd be awesome if @jun could mention what type of motherboard his testing this stuff on and what his bios suggestions are. might help a lot of us! I don't know how mine works, cause I've been waiting for the resync to finish, but it's going super slow...looks like 10days+ for 2*3TB 😮 Quote Link to comment Share on other sites More sharing options...
A.S._id Posted October 25, 2018 Share #600 Posted October 25, 2018 22 часа назад, ziorufus сказал: Is there any chance to have DSM 6.2 working on a hp N36L (AMD processor)? I tried every version from 1.03b to 1.04b without luck. The last working version is 1.02b with DSM 6.1. into bios off "c1e" bootloader only 1.03b 3615/17 yet... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.