arnd13 Posted September 23, 2018 Share #451 Posted September 23, 2018 Hello, I'm using DSM 6.2-23739 Update 2 (DS3617xs) with no problems. Installed on a Microserver Gen8 with Core i3-3240. Quote Link to comment Share on other sites More sharing options...
CrazyCreator Posted September 23, 2018 Share #452 Posted September 23, 2018 (edited) And this is the latest DSM Version, at the moment, for install? Version: 6.2.1-23824 brick my NAS, right? Edited September 23, 2018 by CrazyCreator Quote Link to comment Share on other sites More sharing options...
Elpee Posted September 23, 2018 Share #453 Posted September 23, 2018 I have 2 questions, guys. 1. After i mounted (by OSF mount) to adjust SN, MAC, VID, PID in grub file, I burnt the img into a USB drive by Rufus. Finally, I found out I keyed in a typo my MAC. I wanted to correct it in grub file but I couldn't see my USB drive anymore when I hook it up to my Windows 10 desktop. I could see my USB drive in Disk Management thou. Please help. 2. My baremetal Nas has 12 HDDs, should I leave SataPortMap=1 (as default) or change to 12 in grub? Thanks for your prompt replies. I appreciate it. Quote Link to comment Share on other sites More sharing options...
GizmoPower Posted September 23, 2018 Share #454 Posted September 23, 2018 (edited) 13 minutes ago, Elpee said: I have 2 questions, guys. 1. After i mounted (by OSF mount) to adjust SN, MAC, VID, PID in grub file, I burnt the img into a USB drive by Rufus. Finally, I found out I keyed in a typo my MAC. I wanted to correct it in grub file but I couldn't see my USB drive anymore when I hook it up to my Windows 10 desktop. I could see my USB drive in Disk Management thou. Please help. 2. My baremetal Nas has 12 HDDs, should I leave SataPortMap=1 (as default) or change to 12 in grub? Thanks for your prompt replies. I appreciate it. Question 1: You probably have to do it all over again. To see your USB drive you need to do a clean and format. This is done by using diskpart in cmd. Open cmd (Command line) Type -diskpart- then -list disk- then select the USB disk. Example. -select disk 1- Then -clean- Then -create partition primary- Now you can see the USB drive and format as usual in windows by right clicking and selectin -Format- Edited September 23, 2018 by GizmoPower Quote Link to comment Share on other sites More sharing options...
sirotkaslo Posted September 24, 2018 Share #455 Posted September 24, 2018 On 9/18/2018 at 7:41 PM, JMRR said: Try another nic adapter on esxi Sent from my iPhone using Tapatalk Bought an intel pro 1000 pt, same thing, no ip after restart. Tried with DSM 6.1 image for 916+, all is working as it should with hardware transcoding. Tried esxi, but I get an error 22 there. Quote Link to comment Share on other sites More sharing options...
filippo333 Posted September 24, 2018 Share #456 Posted September 24, 2018 Is there a DS918+ loader version of the DSM 6.2? For previous loader releases this was an option. Quote Link to comment Share on other sites More sharing options...
Elpee Posted September 24, 2018 Share #457 Posted September 24, 2018 13 hours ago, GizmoPower said: Question 1: You probably have to do it all over again. To see your USB drive you need to do a clean and format. This is done by using diskpart in cmd. Open cmd (Command line) Type -diskpart- then -list disk- then select the USB disk. Example. -select disk 1- Then -clean- Then -create partition primary- Now you can see the USB drive and format as usual in windows by right clicking and selectin -Format- Thanks. How about question 2? Should I leave SataPortMap=1 (as default) or change to 12 in grub for 12 HDDs? Quote Link to comment Share on other sites More sharing options...
GizmoPower Posted September 25, 2018 Share #458 Posted September 25, 2018 On 9/23/2018 at 7:05 PM, GizmoPower said: I get: No hard disk found. What to do? - Loader version and model: Jun's Loader v1.03b - DS3615xs - Installation type: Baremetal Intel S5500HCV No solution yet? Quote Link to comment Share on other sites More sharing options...
luchuma Posted September 25, 2018 Share #459 Posted September 25, 2018 No solution yet?You install 6.2 or 6.2.1?For 6.2 you can create extra.lzma with drivers you need. For 6.2.1 no solution yet. Wysłane z mojego SM-G930F przy użyciu Tapatalka Quote Link to comment Share on other sites More sharing options...
GizmoPower Posted September 25, 2018 Share #460 Posted September 25, 2018 3 minutes ago, luchuma said: You install 6.2 or 6.2.1? For 6.2 you can create extra.lzma with drivers you need. For 6.2.1 no solution yet. Wysłane z mojego SM-G930F przy użyciu Tapatalka Thank you, but I dont know how to compile drivers.. :/ I am on 6.1.6-15266 with 1.02b Should I just wait? Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted September 25, 2018 Share #461 Posted September 25, 2018 (edited) 6 hours ago, luchuma said: You install 6.2 or 6.2.1? For 6.2 you can create extra.lzma with drivers you need. For 6.2.1 no solution yet. Wysłane z mojego SM-G930F przy użyciu Tapatalka For 6.2 you can create extra.lzma with drivers you need, really ? Where is it ? Because they still have not made on yet for DS3617 or DS3615 . They only have it for the DS918+ So we must wait... Edited September 25, 2018 by painkiller895 Quote Link to comment Share on other sites More sharing options...
lthasenhod Posted September 25, 2018 Share #462 Posted September 25, 2018 (edited) - Outcome of the clean install: FAIL - DSM version prior update: none - Loader version and model: Jun's Loader v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: Clean install - Hardware: HP Microserver Gen8, RAM: 16GB HP, CPU E3-1230 V2 @ 3.3GHz, NIC: HP QLogic 82XX dual 10GB SFP+, HDD 4 * Samsung HD204UI. SSD: Samsung SSD 840 EVO 120GB - Additional comments : After install it fails to get an ip address on any network card, if i take out the HP QLogic card before install it works, as soon as i put it back in, the machine endlessly writes below during boot Quote usb 3-1: USB disconnect, device number XX EDIT: after further investigation it seems the qlcnic driver is broken, when the card is in i cant even do ifconfig/lspci command via serial console without the system freezing/halting. Kind Regards, LThasenhod Edited September 25, 2018 by lthasenhod Quote Link to comment Share on other sites More sharing options...
luchuma Posted September 25, 2018 Share #463 Posted September 25, 2018 For 6.2 you can create extra.lzma with drivers you need, really ? Where is it ? Because they still have not made on yet for DS3617 or DS3615 . They only have it for the DS918+ So we must wait...Realy you can create not download There is released Source for 6.2 Wysłane z mojego SM-G930F przy użyciu Tapatalka Quote Link to comment Share on other sites More sharing options...
molaga Posted September 26, 2018 Share #464 Posted September 26, 2018 On 8/1/2018 at 11:00 AM, jun said: Hi, everyone, Thanks for you patience. I've uploaded a beta version of 3615/3617 loader to mega, please test and give your feedback. https://mega.nz/#F!ZlkHQTTb!keje3RK017OjTp3vuWb-Cw note: uefi boot still has issue, it will be fixed when I have more time. ---Beginning of addition by polanskiman--- For reference (Reveal hidden contents) ---End of addition by polanskiman--- I have J5005 , this motherboard only have uefi boot . but uefi doesn't work with this loader . can not find the disk. Quote Link to comment Share on other sites More sharing options...
Rezdbic Posted September 26, 2018 Share #465 Posted September 26, 2018 (edited) Can anyone rebuild last loader version (for 3617) with MBR Partition table? Please!😢 Edited September 26, 2018 by Rezdbic Quote Link to comment Share on other sites More sharing options...
Rowdy Posted September 26, 2018 Share #466 Posted September 26, 2018 (edited) I've just installed my first XPEnology with this. Used the bootloader from this Mega repo (Jun's v1.03a2 DS918), did a bare metal install and just installed from the web (so didn't use the pat. I downloaded the wrong one and it was faster to try directly), worked like a charM. After that I could update without any problems to the latest version, DSM 6.2-23739. Oh, and UEFI boot. ASRock J4105-ITX (Intel Celeron J4105), 16GB RAM, 2xSATA3 WD30EZRX Edited September 26, 2018 by Rowdy Quote Link to comment Share on other sites More sharing options...
yozz Posted September 27, 2018 Share #467 Posted September 27, 2018 Hey! How i can convert .img loader to .iso? Need for installing xpenology to proxmox. Quote Link to comment Share on other sites More sharing options...
kgp721 Posted September 27, 2018 Share #468 Posted September 27, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 - 15284 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: TerraMaster F4-220 - Additional comments: CHANGED BIOS TO LEGACY AND CHANGED BOOT ORDER Everything works...as mentioned I had to change the bios from UEFI and Legacy to Legacy ONLY and change the boot order to boot from the USB first 1 Quote Link to comment Share on other sites More sharing options...
GizmoPower Posted September 27, 2018 Share #469 Posted September 27, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.6-15266 - Loader version and model: Jun's Loader v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: Baremetal Intel S5500HCV - Additional comments: Changed storage controller to AHCI in bios I first had the -No hard disk found- Then changed storage controller in bios to AHCI Quote Link to comment Share on other sites More sharing options...
marigo Posted September 27, 2018 Share #470 Posted September 27, 2018 8 hours ago, yozz said: Hey! How i can convert .img loader to .iso? Need for installing xpenology to proxmox. Check out some tutorials in the installation section. Quote Link to comment Share on other sites More sharing options...
yozz Posted September 27, 2018 Share #471 Posted September 27, 2018 (edited) 1 час назад, marigo сказал: Check out some tutorials in the installation section. TY! guys! anyone have worked dms services? quickconnect and same? or this features don't work on xpenology? Edited September 27, 2018 by yozz Quote Link to comment Share on other sites More sharing options...
Jose Posted September 27, 2018 Share #472 Posted September 27, 2018 On 9/25/2018 at 5:32 PM, luchuma said: Realy you can create not download There is released Source for 6.2 Wysłane z mojego SM-G930F przy użyciu Tapatalka I have been able to compile for 6.2 but the drivers would only work while you havent installed the .pat, as soon as it reboots and the driver is used, network card or hba card ask for driver, it would crash. I think the sources avaliable for the 3615 abd 3617 may not be the latest or have the correct config. Quote Link to comment Share on other sites More sharing options...
flyride Posted September 27, 2018 Share #473 Posted September 27, 2018 3 hours ago, yozz said: guys! anyone have worked dms services? quickconnect and same? or this features don't work on xpenology? Please check out General FAQ and in particular, Synology cloud services Quote Link to comment Share on other sites More sharing options...
Servman Posted September 28, 2018 Share #474 Posted September 28, 2018 Have tried the new DSM 6.2 Loader on a Dell Optiplex 380 and it stats not hard Drives applied but DSM 6.1 loader works fine. Quote Link to comment Share on other sites More sharing options...
lovelove Posted September 28, 2018 Share #475 Posted September 28, 2018 Intel BS1200BTS + E3-1230v2 + 16G DDR3 1. Boot with USB ( modified usb flash vid ) 2. Find device with Synology Assistant 3. Install 6.2 or 6.2.1 4. Reboot 5. Can NOT find device to continue final step ( write config and done ) do not know why Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.