Noks_st Posted August 1, 2020 Share #1751 Posted August 1, 2020 Thank you very much jun!! Its very good job! Quote Link to comment Share on other sites More sharing options...
Noks_st Posted August 1, 2020 Share #1752 Posted August 1, 2020 (edited) Easy start in my old system. Thank you! Sorry for my second post, i cant del this Edited August 1, 2020 by Noks_st Quote Link to comment Share on other sites More sharing options...
IG-88 Posted August 1, 2020 Share #1753 Posted August 1, 2020 On 7/30/2020 at 9:01 AM, therus000 said: i have board GA-z77x and procossor i5 3470. what loader and system better i choose ? i already try 3617 but synology assistant cant find it help please 1.04b 918+ no go with your cpu as its to old most likely for 3617 you used loader 1.03b an d that needs csm/legacy mode (also as boot device) https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/ loader 1.02b and dsm 6.1 is more easy in that area also you might read faq and tutorial https://xpenology.com/forum/forum/83-faq-start-here/ https://xpenology.com/forum/topic/7973-tutorial-installmigrate-dsm-52-to-61x-juns-loader/ 1 Quote Link to comment Share on other sites More sharing options...
Flautista1988 Posted August 3, 2020 Share #1754 Posted August 3, 2020 (edited) Hello! Greeting from Bogota - Colombia and excuse me for my bad english. Ok, im using DSM Synology with Juns Loader v 1.03b and DSM 6.2-25426 in a HP DC 6300 (3615X) (Intel Core I3 3220 @ 3.30 Ghz and 4 GB Ram DDR3) I too have some problems with boot: Uefi boot dont recognize ethernet card // MBR/bios dont boot- The Extra.lmza the issue petsist and Synoboot 918+ fails to boot too. I tried different methods, incluide Synoboot modded iso and onlymbr mod, but my pc dont boot correctly synoboot My HP DC 6300 Accidentally boot with a E2B USB Stick and EUREKA!!! Synoboot boot sucessfully on MBR and ethernet recognized and DSM 6.2-25426 installed!! Ok, again sorry for my bad english jaja! The solution is, Use your usb memory and install Synoboot normally In your bios Seetings, disable UEFI boot and priorize legacy boot. In another USB memory, install Easy2Boot (E2B), only E2B. Ok, try again and boot, your CPU will boot with E2B Stick and in the E2B Menu, you can edit the default boot seetings and time out, and walah, Synoboot... boot in mbr! WhatsApp Video 2020-08-03 at 6.17.12 PM.mp4 Edited August 3, 2020 by Flautista1988 1 Quote Link to comment Share on other sites More sharing options...
amnher Posted August 7, 2020 Share #1755 Posted August 7, 2020 (edited) I was able to install 6.1.7 with 6.1 loader mbr gensys without problem on my lenovo desktop with pentium 4 HT but when trying to fresh install 6.2.3 with 6.2 loader ds3615xs,ds3617xs or ds918, it always shows no hard disk installed. It works fine on 6.1... i think it has no ahci Edited August 7, 2020 by amnher Quote Link to comment Share on other sites More sharing options...
DevonRock Posted August 9, 2020 Share #1756 Posted August 9, 2020 How to install DSM 6.2 on Acer Aspire 5552G? 5.2 Loader works perfectly Quote Link to comment Share on other sites More sharing options...
Gamtrulia Posted August 20, 2020 Share #1757 Posted August 20, 2020 Can I use v1.03b loader to install DSM 6.1.7 first, so that I can upgrade to 6.2 later? Quote Link to comment Share on other sites More sharing options...
krycha88 Posted September 1, 2020 Share #1758 Posted September 1, 2020 On 8/4/2020 at 12:59 AM, Flautista1988 said: Hello! Greeting from Bogota - Colombia and excuse me for my bad english. Ok, im using DSM Synology with Juns Loader v 1.03b and DSM 6.2-25426 in a HP DC 6300 (3615X) (Intel Core I3 3220 @ 3.30 Ghz and 4 GB Ram DDR3) I too have some problems with boot: Uefi boot dont recognize ethernet card // MBR/bios dont boot- The Extra.lmza the issue petsist and Synoboot 918+ fails to boot too. I tried different methods, incluide Synoboot modded iso and onlymbr mod, but my pc dont boot correctly synoboot My HP DC 6300 Accidentally boot with a E2B USB Stick and EUREKA!!! Synoboot boot sucessfully on MBR and ethernet recognized and DSM 6.2-25426 installed!! Ok, again sorry for my bad english jaja! The solution is, Use your usb memory and install Synoboot normally In your bios Seetings, disable UEFI boot and priorize legacy boot. In another USB memory, install Easy2Boot (E2B), only E2B. Ok, try again and boot, your CPU will boot with E2B Stick and in the E2B Menu, you can edit the default boot seetings and time out, and walah, Synoboot... boot in mbr! yes, this way works! - Outcome of the update: SUCCESSFUL - DSM version prior update: 6.2-25426 - Loader version and model: JUN'S LOADER 1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: HP t610 thin clien - Additional comments: Boot USB with EASy2Boot Quote Link to comment Share on other sites More sharing options...
flyride Posted September 1, 2020 Share #1759 Posted September 1, 2020 On 8/20/2020 at 3:16 AM, Gamtrulia said: Can I use v1.03b loader to install DSM 6.1.7 first, so that I can upgrade to 6.2 later? I don't believe that this will work. What is the benefit for installing 6.1.7 as an interim step? Quote Link to comment Share on other sites More sharing options...
Gamtrulia Posted September 2, 2020 Share #1760 Posted September 2, 2020 Nevermind. v1.03b doesn't work for me. Quote Link to comment Share on other sites More sharing options...
cuorekid Posted September 3, 2020 Share #1761 Posted September 3, 2020 this version work for AMD system ? Quote Link to comment Share on other sites More sharing options...
casperse Posted September 6, 2020 Share #1762 Posted September 6, 2020 I just did a new VM install on Unraid wanted to use 2 LAN HW ported to the image - Outcome of the update: FAIL - DSM version prior update (6.2.3) : DSM_DS3615xs_25423 --> DSM_DS3615xs_25426 - Loader version and model: JUN'S LOADER 1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM machine Unraid - Additional comments: Can now only install when setting the loader as USB (SATA does not work anymore) I end up having the synoboot_3615.img showing up like this? This is really strange... (Don't know what would happen if I ejected this?) Quote Link to comment Share on other sites More sharing options...
djvas335 Posted September 6, 2020 Share #1763 Posted September 6, 2020 Bad VID PID for the usb drive 1 hour ago, casperse said: I just did a new VM install on Unraid wanted to use 2 LAN HW ported to the image - Outcome of the update: FAIL - DSM version prior update (6.2.3) : DSM_DS3615xs_25423 --> DSM_DS3615xs_25426 - Loader version and model: JUN'S LOADER 1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM machine Unraid - Additional comments: Can now only install when setting the loader as USB (SATA does not work anymore) I end up having the synoboot_3615.img showing up like this? This is really strange... (Don't know what would happen if I ejected this?) Quote Link to comment Share on other sites More sharing options...
casperse Posted September 6, 2020 Share #1764 Posted September 6, 2020 (edited) Update: I forgot to set the controller for the sata = 1 for the (USB) I can now boot without problems again! But I have to stay at DSM_DS3615xs_25423_6.2.3 cant update to the DSM_DS3615xs_25426_6.2.3 I even managed to get all listed as drives (USB 50MB/Virtual drive for APPs 50G/ SATA direct port 3TB drive) Edited September 6, 2020 by casperse Quote Link to comment Share on other sites More sharing options...
flyride Posted September 6, 2020 Share #1765 Posted September 6, 2020 https://xpenology.com/forum/topic/28183-running-623-on-esxi-synoboot-is-broken-fix-available/ Quote Link to comment Share on other sites More sharing options...
venno Posted September 8, 2020 Share #1766 Posted September 8, 2020 (edited) New install and am running juns 1.04b loader and DSM 6.2.3 25426 PAT file. DS918+ I have a Supermicro A2SDi-H-TF mobo that has 2 onboard 10gbe copper nics, Icannot get these to show up in DSM (I have used a USB ethernet dongle and the IPMI to install and configure DSM so far). The onboard nics are intel x557 I think which should be supported by ixgbe inbuilt driver. Can anyone suggest what to do to get nics showing up ? Edited September 8, 2020 by venno left out NAS type Quote Link to comment Share on other sites More sharing options...
venno Posted September 8, 2020 Share #1767 Posted September 8, 2020 Just found the section on 918 extra files mod by IG88, works like a charm, I posted too quick. Quote Link to comment Share on other sites More sharing options...
FabioVRed Posted September 9, 2020 Share #1768 Posted September 9, 2020 excuse me, where i can generate serial number for 918+? Quote Link to comment Share on other sites More sharing options...
flyride Posted September 9, 2020 Share #1769 Posted September 9, 2020 I don't think anyone has ever posted a serial generator for DS918+ Quote Link to comment Share on other sites More sharing options...
FabioVRed Posted September 9, 2020 Share #1770 Posted September 9, 2020 6 hours ago, flyride said: I don't think anyone has ever posted a serial generator for DS918+ so, can i use a DS916 serial generator? Quote Link to comment Share on other sites More sharing options...
flyride Posted September 9, 2020 Share #1771 Posted September 9, 2020 No that will not work. You can leave the existing serial in the loader alone if you like. Quote Link to comment Share on other sites More sharing options...
FabioVRed Posted September 11, 2020 Share #1772 Posted September 11, 2020 On 9/10/2020 at 12:22 AM, flyride said: No that will not work. You can leave the existing serial in the loader alone if you like. This way transcoding won't work right? If instead I insert an original serial does it work? Quote Link to comment Share on other sites More sharing options...
casperse Posted September 12, 2020 Share #1773 Posted September 12, 2020 On 9/6/2020 at 8:30 PM, flyride said: https://xpenology.com/forum/topic/28183-running-623-on-esxi-synoboot-is-broken-fix-available/ Thanks! This fixed both my 3615 and 3617 DSM both are now on the latest DSM update DSM 6.2.3-25426 Update 2 Quote Link to comment Share on other sites More sharing options...
ikkeenjij36 Posted September 20, 2020 Share #1774 Posted September 20, 2020 (edited) - Outcome of the update: UNSUCCESSFUL - DSM version prior update: 6.1.7-15284 - Loader version and model: JUN'S LOADER 1.03b - DS3617xs - Using custom extra.lzma: YES - Installation type: DSM 6.2.2-24922 Baremetall on Sabertooth 990fx with AMD-FX-8320 8core cpu - Additional comments: fine on previous setup with 1.02b loader with 6.1.7-15284 It shows up in the network to install,after install it's not comimg back in the network anymore Help needed,when i have to go to another topic please direct me. Edited September 20, 2020 by ikkeenjij36 Quote Link to comment Share on other sites More sharing options...
ikkeenjij36 Posted September 20, 2020 Share #1775 Posted September 20, 2020 2 hours ago, ikkeenjij36 said: - Outcome of the update: UNSUCCESSFUL - DSM version prior update: 6.1.7-15284 - Loader version and model: JUN'S LOADER 1.03b - DS3617xs - Using custom extra.lzma: YES - Installation type: DSM 6.2.2-24922 Baremetall on Sabertooth 990fx with AMD-FX-8320 8core cpu - Additional comments: fine on previous setup with 1.02b loader with 6.1.7-15284 It shows up in the network to install,after install it's not comimg back in the network anymore Help needed,when i have to go to another topic please direct me. The lan is a Realtek 8111E , 1 x Gigabit LAN Controller(s) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.