bglf83 Posted November 24, 2019 Share #1601 Posted November 24, 2019 I use an Intel Pro 1000 PT people also talk about the HP 360T. The common factor is they use the Intel e1000e driver built into DSM. Meaning they are natively supported. 1.04b is only for the 918 and it may not have a supported PCIe network card list but the 1.03b for 3615xs does have that on the synology site.1.04b is good if you are trying to do hardware acceleration for video, otherwise I do not think there is a benefit. The actual versions of DSM are the same for both loaders. Quote Link to comment Share on other sites More sharing options...
geocristi Posted November 29, 2019 Share #1602 Posted November 29, 2019 Hello , I Have a Thecus N2560 running DSM 5.2 , is it possible to upgrade it to 6.2? does anyone try it with DSM 6 ? thx Quote Link to comment Share on other sites More sharing options...
geeked Posted November 30, 2019 Share #1603 Posted November 30, 2019 Are there any ISO files for 6.x? Trying to load a couple instances on Proxmox and seem to only be able to successfully launch 5.2 or older using the provided ISO. I saw the ISO files on the Mega links but they are coming back corrupted. I cannot load img files into Proxmox unless I use a long drawn out EFI disk method which isnt great for backups. TLDR, where are the ISO files? Searching this forum topic gave 0 results. Thank you. Quote Link to comment Share on other sites More sharing options...
davidmarli Posted December 8, 2019 Share #1604 Posted December 8, 2019 Hi, I've a N54L working with loader 1.02b and DSM 6.0.2-8451 Update 7. Can someone explain me what to do to upgrade to DSM 6.2 without loosing any data (of course) Thank you. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted December 9, 2019 Share #1605 Posted December 9, 2019 On 12/1/2019 at 2:06 AM, geeked said: Are there any ISO files for 6.x? Trying to load a couple instances on Proxmox and seem to only be able to successfully launch 5.2 or older using the provided ISO. I saw the ISO files on the Mega links but they are coming back corrupted. I cannot load img files into Proxmox unless I use a long drawn out EFI disk method which isnt great for backups. TLDR, where are the ISO files? Searching this forum topic gave 0 results. Thank you. No have but you can convert the .img file to .iso yourself. At least that's what I do to use the loader with VirtualBox. I am working on MAC so for me it's just a matter of using the Disk Utility, converting the .img file to a .dmg file and then renaming the extension to .iso. Quote Link to comment Share on other sites More sharing options...
speedyrazor Posted December 9, 2019 Share #1606 Posted December 9, 2019 Hi, Im running this on a KVM vm, but the e1000 driver is working, but I really need to use the virtio network driver. I've done extensive searching, but can find a synoboot-1.04b with virtio driver compiled in, but I read somewhere its possible to compile myself. Does anyone know of a link to download a re-compiled one, or instructions on how to compile it in myself please? Kind regards. Quote Link to comment Share on other sites More sharing options...
speedyrazor Posted December 11, 2019 Share #1607 Posted December 11, 2019 On 12/9/2019 at 8:05 AM, speedyrazor said: Hi, Im running this on a KVM vm, but the e1000 driver is working, but I really need to use the virtio network driver. I've done extensive searching, but can find a synoboot-1.04b with virtio driver compiled in, but I read somewhere its possible to compile myself. Does anyone know of a link to download a re-compiled one, or instructions on how to compile it in myself please? Kind regards. Sorry, correction.. "but can't find a synoboot-1.04b with virtio driver compiled in" Quote Link to comment Share on other sites More sharing options...
IG-88 Posted December 11, 2019 Share #1608 Posted December 11, 2019 On 12/9/2019 at 9:05 AM, speedyrazor said: Does anyone know of a link to download a re-compiled one, or instructions on how to compile it in myself please? https://xpenology.com/forum/topic/7187-how-to-build-and-inject-missing-drivers-in-jun-loader-102a/ i n the next version of the extra.lzma will have virtio drivers present (but they will not be loaded by default) so you can test atm they are in my test versions for 3615/17 but i plan to redo the 918+ driver package around christmas (i guess it will be more after christmas) and then i will add the virtio drivers too Quote Link to comment Share on other sites More sharing options...
speedyrazor Posted December 12, 2019 Share #1609 Posted December 12, 2019 12 hours ago, IG-88 said: https://xpenology.com/forum/topic/7187-how-to-build-and-inject-missing-drivers-in-jun-loader-102a/ i n the next version of the extra.lzma will have virtio drivers present (but they will not be loaded by default) so you can test atm they are in my test versions for 3615/17 but i plan to redo the 918+ driver package around christmas (i guess it will be more after christmas) and then i will add the virtio drivers too Hi IG-88, I appreciate your reply and good news support will be coming. Any chance I could try your 'test versions for 3615/17' please? Kind regards. Quote Link to comment Share on other sites More sharing options...
prad Posted December 12, 2019 Share #1610 Posted December 12, 2019 On 11/30/2019 at 8:06 PM, geeked said: Are there any ISO files for 6.x? Trying to load a couple instances on Proxmox and seem to only be able to successfully launch 5.2 or older using the provided ISO. I saw the ISO files on the Mega links but they are coming back corrupted. I cannot load img files into Proxmox unless I use a long drawn out EFI disk method which isnt great for backups. TLDR, where are the ISO files? Searching this forum topic gave 0 results. Thank you. Hi geeked! You didn't need an iso-file for Proxmox. Just download the img-file and rename it to .raw. With this RAW-File you could easyly install it. May you search for the E1001e networkcard with proxmox, if you would install the latest version. You also can search in the forum for proxmox and you can find help! regards peter Quote Link to comment Share on other sites More sharing options...
geeked Posted December 13, 2019 Share #1611 Posted December 13, 2019 On 12/12/2019 at 3:57 AM, prad said: Hi geeked! You didn't need an iso-file for Proxmox. Just download the img-file and rename it to .raw. With this RAW-File you could easyly install it. May you search for the E1001e networkcard with proxmox, if you would install the latest version. You also can search in the forum for proxmox and you can find help! regards peter I appreciate the response. However, version 6.0-4 of Proxmox does not seem to allow me to upload raw files. I have all exceptions added to the storage and still no dice. Wont let me upload it. Quote Link to comment Share on other sites More sharing options...
Mentat Posted December 18, 2019 Share #1612 Posted December 18, 2019 On 12/14/2018 at 2:50 AM, venenox said: Hi ,, only one question , idont change the mac address to use wake on lan , i use 1.04b - synoboot-ds918 . where is the grub.cfg to change ?? i only see four archives in the boot pendrive ... extra.izma extra2.izma rd.gz zimage Thanks I have the same problem with June loader 1.03b! There is no file grub.cfg I've made the microSD in Mac, with balena Etcher. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted December 18, 2019 Share #1613 Posted December 18, 2019 9 hours ago, Mentat said: There is no file grub.cfg more like, you dont know where it is - how did you intall without a proper vid/pid fro m then usb? you can read about that here https://xpenology.com/forum/topic/7973-tutorial-installmigrate-dsm-52-to-61x-juns-loader/ its also possible to mount the usb on the system where its used see this example mkdir -p /mnt/synoboot1 mkdir -p /mnt/synoboot2 echo 1 > /proc/sys/kernel/syno_install_flag mount /dev/synoboot1 /mnt/synoboot1 mount /dev/synoboot2 /mnt/synoboot2 Quote Link to comment Share on other sites More sharing options...
satdream Posted December 22, 2019 Share #1614 Posted December 22, 2019 (edited) Hi everybody, I have issue in the final recovery of a crash due to a Bios reset issue ... Configuration: HP Gen 8 micro, i5 3470T update, 12 Gb Ram + PCIe dual eSata board DELL H310 w/ LSI 9211-8i P20 IT Mode with: x4 main HDDs on integrated Gen8 slots are connected to the DELL H310 (the 4 disks Gen8 eSata cable connected to the H310 eSata slot 1) an external extension Box with x4 additionnal HDD (mix of SAS/SATA Disk) is connected via eSata cable to the H310 eSata slot 2) On the former HP Gen 8 eSata on motherboard: x2 SSD in cache via eSata/4 SATA cable (2 remain free) Total: x10 Disks, SHR/BTRSF, ~45 Tb available w/tolerance 1 HDD Crash ... I have issue in the recovery of crashed 1.02b/3617xs/6.1.2 ... I have now to migrate in order to recover as in the mess and stress I made too many attemps with different release/loader version. With test drives I validated to target the 1.03b/3615xs/6.2.2 (and many thanks to IG-88 real master of driver, as the Broadcom NiC is working on Gen 8 now with 6.2.2 !). Config was working in 1.02b wo/AHCI, 10 drives recognized correctly : SSD1 (Disk1) | SSD2 (Disk2) | empty (Disk3) | empty (Disk4) | HDD1 (Disk5) | HDD2 (Disk6) | HDD3 (Disk7) | HDD4 (Disk8) | HDD5 (Disk9) | HDD6 (Disk10) | HDD7 (Disk11) |HDD8) (Disk12) But with 1.03b (activated AHCI to detect integrated Gen 8 eSata) I have problem in HDD identification/index: internal Gen 8 eSata is correctly mapped (thx to activated AHCI), but the HHD1 to HDD4 are wrongly mapped, and only HDD6 & HDD7 are detected SSD1 (Disk1) | SSD2 (Disk2) | empty (Disk3) | empty (Disk4) | HDD1 (Disk7) | HDD2 (Disk8) | HDD3 (Disk9) | HDD4 (Disk10) | HDD5 (N/A) | HDD6 (Disk11) | HDD7 (Disk12) |HDD8) (N/A) I tried several grub.cfg configurations, assuming (please correct if wrong): - consider to have 2 controllers : the internal Gen8 with 4 ports, and the H310 with 8 ports: 4 ports/slot 1 & 4 ports/slot 2 set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0004 SataPortMap=48 SasIdxMap=0' I tried also to "shift" the Sas of -2 index set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0004 SataPortMap=48 SasIdxMap=0xFFFFFFFE' but no change ... Any idea or suggestion ? as in any case the HDD on H310 are wrongly mapped starting at #7 instead o #5 Many thanks for your help ! Edited December 22, 2019 by satdream Quote Link to comment Share on other sites More sharing options...
satdream Posted December 24, 2019 Share #1615 Posted December 24, 2019 (edited) Le 22/12/2019 à 17:16, satdream a dit : Any idea or suggestion ? as in any case the HDD on H310 are wrongly mapped starting at #7 instead o #5 Many thanks for your help ! I found the solution, it is in conf files to make changes: - max capacity to update (from x12 to x14 in my case, due to AHCI showing additional disk ports on Gen8) - then avoid DSM to exclude disks (recognized by system as checked in demsg) assimilated them to USB or eSATA: Disable eSATA updating esataportcfg to 0x00000 (instead default 0xff000) = 0 eSATA for Gen8 Align exact USB ports updating usbportcfg to 0x7C000 (instead default 0x300000) = 5 USB for Gen8 default HW config. Align exact port to consider updating internalportcfg to 0x3FFF (instead of default 0xfff) = 14 Disks ports in my case After reboot the all disks are detected and mapped ... SOLVED Edited December 24, 2019 by satdream Quote Link to comment Share on other sites More sharing options...
satdream Posted December 26, 2019 Share #1616 Posted December 26, 2019 Gen8 users (and other ?), in case of SAS HDD installed both with SATA on the same Mini-SAS port w/mixed SATA/SAS Disks (connected via LSI PCie card)= do not configure the "SasIdxMap=0", it shall not be part of Grub.cfg in order to allow detection of mix of Disks, if configured the SATA disks are not mapped by DSM ! Quote Link to comment Share on other sites More sharing options...
sbilge Posted December 27, 2019 Share #1617 Posted December 27, 2019 On 7/22/2019 at 5:03 PM, Lefteris Krasias said: I've did clean installation for DS3617xs along with - v1.03b bootloader. After uploading DSM_DS3617xs_24922.pat and automatically restart of the server I'm loosing network access to the machine. Please advice how to solve my issue or any newest bootloader that can work with the latest DSM. Looking forward to hear from anyone here Hello, I have same problem. I updated to SM_DS3617xs_24922.pat then reboot but I did not connect later. I reconfigured USB drive with 3617xs again. Then I reinstalled 1.03b then migrated it. It rebooted then succesfull message but I can not access again. Last chance I installed ds3615_6.2_1.03b to USB Drive. I choose clean installation: keep my files only (manual file: DSM_DS3615xs_24922.pat). It' s finishing to install with success but I can not find my NAS. Any idea? Sincerely, My HW: HPE ProLiant MicroServer Gen8 Server / Intel Celeron G1610T / 8 GB / HP Ethernet 1 Gb 2-port 332i Adapter / 4x4 TB Raid5 + 80 GB SSD Quote Link to comment Share on other sites More sharing options...
davidmarli Posted December 30, 2019 Share #1618 Posted December 30, 2019 Hi, I try to upgrade to 6.2 on a n54l but nothing works ... What I did : take a new USB stick. Download jun 1.03b 3615xs img. I mount 1rst partition with osfmouunt. I change Pid, VID mac and serial (with a new one generate on the github. I save all. I download extra.lzma 0.5 for 3615xs. I put it on 2nd partition. I shutdown the N54l, plug the usb stick in. I select jun 1.03b reinstall (choice n°2) Then nothing happen : it writes screen will stop updating shortly ... And I never see the lines, kernel decompressing .... Of course with ds assistant, the nas never appears ... Can someone help me ? Thank you. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted December 30, 2019 Share #1619 Posted December 30, 2019 27 minutes ago, davidmarli said: I try to upgrade to 6.2 on a n54l but nothing works ... to what version? if you use 6.2.2 then the new 0.5_test is ok but you also need to copy the zImage and rd.gz of 6.2.2 to the same location as the extra.lzma if you skip that then kernel and driver (in extra.lzma) do not match Quote Link to comment Share on other sites More sharing options...
davidmarli Posted December 30, 2019 Share #1620 Posted December 30, 2019 Any 6.2 version ... but for now, I just would like my n54l be viewed by syno assistant ... Can I use the internal nic with 1.03b ? Quote Link to comment Share on other sites More sharing options...
IG-88 Posted December 30, 2019 Share #1621 Posted December 30, 2019 (edited) 1 hour ago, davidmarli said: Any 6.2 version ... but for now, I just would like my n54l be viewed by syno assistant ... Can I use the internal nic with 1.03b ? yes, if you use 1.03b loader as it comes from jun you will have to use 6.2 v23739 and you cant update further without "loosing" the internal nic as updating to 6.2.2 (v24922) will invalidate the "old" driver from 6.2.0/6.2.1 (6.2.2 kernel used different compile options, the new drivers use these options too and will work with 6.2.2) i'd suggest you take 1.03b, add the new kernel and drivers and then install 6.2.2 with that "modded" loader, see link below https://xpenology.com/forum/topic/21663-driver-extension-jun-103b104b-for-dsm622-for-3615xs-3617xs-918/ that way you are on the latest version and can use all security updates availible Edited December 30, 2019 by IG-88 Quote Link to comment Share on other sites More sharing options...
davidmarli Posted December 30, 2019 Share #1622 Posted December 30, 2019 thank you, I did miss a part of explanations. I'lltry again, changing the kernel file too... I'll try to migrate to 6.2 v23739 Quote Link to comment Share on other sites More sharing options...
davidmarli Posted December 30, 2019 Share #1623 Posted December 30, 2019 is the serial number really important at boot ? Because, I upadte zimage and rd files and still nothing happen, my n54l can't be seen on my network ... Quote Link to comment Share on other sites More sharing options...
davidmarli Posted December 30, 2019 Share #1624 Posted December 30, 2019 ok let's restart the whole thing. What I was to do is upgrade my n54l from 6.0 to 6.2 (23739) So i download jun 1.03b (3615xs version) I change pid vid, mac and serial in grub file on 1st partition. then I don't understand If I have something else to change kernel and rd files ? with those in 23739.pat file ? Do I need to change extra.lzma ? Thank you. Quote Link to comment Share on other sites More sharing options...
davidmarli Posted December 31, 2019 Share #1625 Posted December 31, 2019 OK, how stupid I can be ... I didn't disable c1e support in BIOS. I think I have done that a long time ago ... Now it works great with jun 1.03b and 6.2 23739 ... Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.