Olegin Posted July 25, 2019 Share #1476 Posted July 25, 2019 20 минут назад, Lefteris Krasias сказал: Is there any list with supported NIC'S? You can find in this topic links to the lists of supporting hw in the DSM models. Quote Link to comment Share on other sites More sharing options...
Olegin Posted July 25, 2019 Share #1477 Posted July 25, 2019 28 минут назад, cmpugay сказал: I want to update my NAS to v. 6.2.x from existimnt 6.1 but I'm not able to find Loader for DSM-3617x. Read FAQ there is the link to the loaders. 30 минут назад, cmpugay сказал: Can any one suggest me how do I update to latest DSM for 3517x. I recomend you to use this method. Quote Link to comment Share on other sites More sharing options...
Lefteris Krasias Posted July 26, 2019 Share #1478 Posted July 26, 2019 On 7/25/2019 at 10:16 AM, Lefteris Krasias said: @Olegin Great cleared. So I will proceed to buy the suggested product with Intel Chipset. Is there any list with supported NIC'S? @Olegin @Dfds Hi Both. I've managed to upgrade the NIC to Intel Chipset card. Now after upgrading to the latest DSM I can ping the hard but I'm not able to launch the Webapp from the Browser. Any idea? Quote Link to comment Share on other sites More sharing options...
123gas Posted July 26, 2019 Share #1479 Posted July 26, 2019 Hi, with this hardware I3-4170T 35w Gygabyte GA-H81N-D2H (h81 Chipset) 6x WD RED 4TB which loader do you recommend? Quote Link to comment Share on other sites More sharing options...
Olegin Posted July 27, 2019 Share #1480 Posted July 27, 2019 @123gas Try to install 1.04b 918. Quote Link to comment Share on other sites More sharing options...
cmpugay Posted July 27, 2019 Share #1481 Posted July 27, 2019 Would like to know can I move my existing 3617xs NAS based on June's loader 1.02 to 1.04 DS918xs and if yes, then how ? Quote Link to comment Share on other sites More sharing options...
silver251 Posted July 29, 2019 Share #1482 Posted July 29, 2019 Hello sorry if my question is quite noob or it is not the place. I've been using dsm now for a couple of years and I keep sacling up my main server and i think i got stucked in default limits specified by kernel. I moved from an i7 ES to a TR1950X but kernel is limited by default to 8 cores, Is there a way I can get more? I know is related with a parameter in kernel before compiling but I was not able to boot when I tried to compile a zImage. I am running 918+ loader and DSM 6.2.2-24922 Thank you for the help. Quote Link to comment Share on other sites More sharing options...
biew55 Posted July 30, 2019 Share #1483 Posted July 30, 2019 Hi Jun, How to change mac address of synology ? I try to run second server in the same network. Thanks. Quote Link to comment Share on other sites More sharing options...
qwrty Posted July 30, 2019 Share #1484 Posted July 30, 2019 Just to let you know, the new ds918 loader which support 6.2/6.21 is working great on my config with KVM/Qemu: <cpu mode='custom' match='exact' check='full'> <model fallback='forbid'>Skylake-Client-IBRS</model> <vendor>Intel</vendor> <feature policy='require' name='ss'/> <feature policy='require' name='hypervisor'/> <feature policy='require' name='tsc_adjust'/> <feature policy='require' name='clflushopt'/> <feature policy='require' name='umip'/> <feature policy='require' name='ssbd'/> <feature policy='require' name='xsaves'/> <feature policy='require' name='pdpe1gb'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='yes'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='directsync'/> <source file='/mnt/volume3/vm/dsm6.2.qcow2'/> <backingStore/> <target dev='sdb' bus='sata'/> <boot order='2'/> <alias name='sata0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='directsync'/> <source file='/mnt/volume3/vm/synoboot.img'/> <backingStore/> <target dev='sdc' bus='sata'/> <boot order='1'/> <alias name='sata0-0-2'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <interface type='bridge'> <mac address='00:11:32:12:34:56'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='e1000'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Quote Link to comment Share on other sites More sharing options...
Big_11 Posted August 7, 2019 Share #1485 Posted August 7, 2019 Hi Guys, is there any Chance to get a MBR-Version of the 918+ Loader V1.04.. i tried so much to convert these Loaders (also 1.03b) but without success.. Cause my Supermicro X7DBP-i won't boot from GPT.. or any hints would be also helpful.. Thanks a lot.. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted August 8, 2019 Share #1486 Posted August 8, 2019 15 hours ago, Big_11 said: is there any Chance to get a MBR-Version of the 918+ Loader V1.04.. Have you tried taking the old MBR loader version (from Genesis) and replacing the files with those from the v1.04b loader? Not sure it will work but worth the try. Quote Link to comment Share on other sites More sharing options...
Big_11 Posted August 8, 2019 Share #1487 Posted August 8, 2019 Already tried! But most of this tries ended in stop booting After "Info.txt" is shown on the screen... Don't know whats wrong... Also did not get access to the serial console... 😏 Quote Link to comment Share on other sites More sharing options...
bglf83 Posted August 8, 2019 Share #1488 Posted August 8, 2019 Hi Guys, is there any Chance to get a MBR-Version of the 918+ Loader V1.04.. i tried so much to convert these Loaders (also 1.03b) but without success.. Cause my Supermicro X7DBP-i won't boot from GPT.. or any hints would be also helpful.. Thanks a lot..Why not just use the DS3615XS 1.03b loader? Quote Link to comment Share on other sites More sharing options...
Big_11 Posted August 9, 2019 Share #1489 Posted August 9, 2019 Can't find any MBR Version of this... Did you?.. 1 Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted August 9, 2019 Share #1490 Posted August 9, 2019 1 hour ago, Big_11 said: Can't find any MBR Version of this... Did you?.. Try this tool? Quote Link to comment Share on other sites More sharing options...
bglf83 Posted August 9, 2019 Share #1491 Posted August 9, 2019 I am using 1.03b DS3615xs version with Legacy Boot. I was under the impression that it only works that way. Quote Link to comment Share on other sites More sharing options...
flyride Posted August 9, 2019 Share #1492 Posted August 9, 2019 Legacy boot and MBR are two different things.... MBR (master boot record) is a partition type, and should only be required if you are using really old hardware that cannot support a GPT partition. Legacy boot is the BIOS boot model prior to the current UEFI implementation. Quote Link to comment Share on other sites More sharing options...
Big_11 Posted August 10, 2019 Share #1493 Posted August 10, 2019 after trying a lot, (also this https://www.rodsbooks.com/gdisk/hybrid.html) i found a "phenomen" with my Bootsticks... also GPT formated USB-Drives are booting, but just to the point, where after the bootmenu is displayed, the "info.txt. is shown and then it stopped booting no Kernel booting message …. now i'm not shure if my Hardware supports booting from GPT formatted drives…. the search goes on.. any hints ? some suggestions ? Quote Link to comment Share on other sites More sharing options...
pupie Posted August 14, 2019 Share #1494 Posted August 14, 2019 Thank you very much jun!! Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted August 14, 2019 Share #1495 Posted August 14, 2019 On 8/10/2019 at 4:59 PM, Big_11 said: after trying a lot, (also this https://www.rodsbooks.com/gdisk/hybrid.html) i found a "phenomen" with my Bootsticks... also GPT formated USB-Drives are booting, but just to the point, where after the bootmenu is displayed, the "info.txt. is shown and then it stopped booting no Kernel booting message …. Normal or better put, expected. For whatever reason when booting in legacy mode, the "Booting the kernel" message does not appear. It doesn't mean it's not booting. Quote: On 9/12/2017 at 5:59 PM, Polanskiman said: If you booted the USB drive in EFI mode then you will see the same text without the last 3 lines but that's ok. Quote Link to comment Share on other sites More sharing options...
Big_11 Posted August 14, 2019 Share #1496 Posted August 14, 2019 GOT IT !!!... I've succesfully installed DSM 6.2.2-24922 update 2 to my Supermicro Server !!!.. After a lot of fails with installing for 916+ or 918+ i tried the DS3615xs Version Took the 1.02 MBR Loader of Genesys and replaced the files with thes from 1.03b Loader… and it worked ! i'am happy thanks to all for your support and by now i am really more experienced !.. have a nice day.. 2 1 Quote Link to comment Share on other sites More sharing options...
Mino Posted August 19, 2019 Share #1497 Posted August 19, 2019 I'm running ESXI 6.7 together with the 1.04b loader for DS918+. I wasn't able to boot with UEFI, but legacy mode wen't perfectly fine (It found my existing storage pool and migrated it). The only issue i found is that DSM detects my bootloader disk and complains because it can't read it's data. I only use the drive as bootloader, and have a satacontroller in passtrough where my disks are installed. Are there any solutions to this? var/log/messages: Now obviously i can't remove the disk in esxi, but is it possible to have DSM ignore it somehow? Esxi setup: Quote Link to comment Share on other sites More sharing options...
flyride Posted August 19, 2019 Share #1498 Posted August 19, 2019 Make sure you select "ESXi" from the boot loader option menu Quote Link to comment Share on other sites More sharing options...
Mino Posted August 19, 2019 Share #1499 Posted August 19, 2019 17 minutes ago, flyride said: Make sure you select "ESXi" from the boot loader option menu Are you certain that's it? In the grub file I commented all the baremetal versions out (No other changes besides S/N and mac). #menuentry "DS918+ 6.2.1/6.2 Baremetal $VERSION" --class os { # set img= # savedefault # loadlinux 918 usb # loadinitrd # showtips #} # #menuentry "DS918+ 6.2.1/6.2 Baremetal $VERSION Reinstall" --class os { # set img= # loadlinux 918 usb mfg # loadinitrd # showtips #} menuentry "DS918+ 6.2.1/6.2 VMWare/ESXI $VERSION" --class os { set img= savedefault loadlinux 918 sata loadinitrd showtips } Also this is how my boot looks: Quote Link to comment Share on other sites More sharing options...
flyride Posted August 19, 2019 Share #1500 Posted August 19, 2019 This is what I did in a similar situation: set sata_args='SataPortMap=1 DiskIdxMap=0C00' Also see this: https://xpenology.com/forum/topic/7613-disablehide-50mb-vmware-virtual-disk/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.