Jump to content
XPEnology Community

DSM 6.2 Loader


jun

Recommended Posts

Quote

 

hello all,

 

i allways get using Virtual Machine Manager (VMM) at install Windwos 10 (last iso) a bluscreen kmode_exception_not_handled direct at starting the install.

 

i try'd all loaders like Loader 1.02b with ds3517xs / ds3515xs / ds918+

and DSM_DS3617xs_15284.pat / DSM_DS3615xs_15284.pat . It's allways the same with two different boards and cpu's:

 

MSI Board + i5 7500 + DDR4 -> Socket 1151, Codename Kaby Lake

or

Gigabyte Board + Pentium G4400 + DDR4 -> Socket 1151, Codename Sky Lake

 

But if i use the same USB bootstick with the ready installed DSM on a Haswell system, everything works perfect (Acer Board,i5 4570 Haswell , DDR3) .

 

it seems the that Kaby and Sky Lake are not 100% compatible , can this be true ?

 

except this VMM behavior, DSM seems to work fine.

 

any ideas about this ???

 

Edited by ooooooh
Link to comment
Share on other sites

On 4/10/2019 at 11:32 AM, Gronaldo said:

I use a G5400 with 8GB RAM. Buid details 

 

Thank you Gronaldo :-)

 

Just completed a new build, using:

- Asrock H370M-ITX board and 1.04b loader (DSM 6.2.2-24922)

- Intel Core i3 8100

- 4Go ram

- 6 x HDD (raid SHR-2 + BTRFS)

- Fractal Node 304 Case

 

Working great but only 1 ethernet is recognized

Link to comment
Share on other sites

On 4/18/2019 at 6:23 AM, flo3393 said:

Hello,

 

is a new loader for 918+ coming to Support 6.2.2 ? Some People have Network Problems with onboard CPUs like J5005. 

 

Thanks!

 

Yes, there is a problem, it is not recommended to update, many chips of the network card is not supported.

Link to comment
Share on other sites

I had same problen when I updated the 918+ build manually from 6.2.1 (U6) to 6.2.2. My NAS wasn't find in Network. So I had to reset and rebuild from scratch with 6.2.1.

 

It's not possible for me to update to 6.2.2. now with my Motherboard Gigabyte GA-H270N-Wifi. I don't have any netword card additionally.

 

I wait until a new loader is in future ready for DSM 6.3 or DSM 7. At the moment my NAS works perfectly with 6.2.1- U6.

Link to comment
Share on other sites

Hi, I became a little lost sifting the thread.  I have 1.03b D3617xs baremetal on DSM 6.2.  Are updates to 6.2 still bricking that setup?

Is there an anticipated upgrade for the 3617xs?

 

Lastly, not much difference I can tell between 3615xs and 3617xs …. is a sideways move to 3615xs loader going to allow more up to date DSM to run?

 

THank you :)

Link to comment
Share on other sites

hello,

 

tried to update from 1.02 to 1.03 and i also stuck at first screen and LAN wont work.

 

i read that i should boot in legacy mode and i disabled UEFI boot but the usb pendrive dont boot in legacy mode. tried other pendrive with ultimatebootcd and this is booting in legacy.

i used rufus and also win32diskimager to write the img file - what can cause this problem?

 

Mainboard: Asus H87i

different pendrives

 

Link to comment
Share on other sites

Same for me loader 1.02 works fine, 1.04 also works but with issues and 1.03 doesn't work at all

 

 

I was looking for a new nas like the DS218+ when i learned about xpenology and i wanted to test the Moments functionality that my DS413j doesn't support.

 

I've run the latest DSM version of the DS918 on loader 1.04 and most seems ok except the reboot/shutdown and People & Subject simply doesn't work in Moments

Then i wanted to try the DS3615xs as this one has a dual core CPU like my hardware (I read something about requiring 4 cores for moment to work correctly on DS918)

With loader 1.03 i don't seem to have a working network

With loader 1.02 all works fine, reboot & Moments issues are gone but i'm stuck at DSM 6.1.7

 

Can someone help me get loader 1.03 working? or is there another solution available?

How can I get to the detailed logs, I used SSH & SFTP but it seems you need additional rights to acces those logs.

 

 

Link to comment
Share on other sites

On 5/12/2019 at 4:50 PM, norman666 said:

hello,

 

tried to update from 1.02 to 1.03 and i also stuck at first screen and LAN wont work.

 

i read that i should boot in legacy mode and i disabled UEFI boot but the usb pendrive dont boot in legacy mode. tried other pendrive with ultimatebootcd and this is booting in legacy.

i used rufus and also win32diskimager to write the img file - what can cause this problem?

 

Mainboard: Asus H87i

different pendrives

 

 

Hi I have the same board with Intel Xeon 1245 V3 and 1.02b is working 1.04b is working but 1.04b works only without a monitor connected 1.03 b is not working(diskstaion not detected on LAN) is this related to uefi(its disabled) from this motherboard is there a loader 1.03b with legacy(MBR) support? thank you

Link to comment
Share on other sites

Only for the Record my HP Gen 8 is working with the last DSM 6.2.2  24922 

 

Here  are the specification:

 

Xeon 1220L (will upgrade in the near future to E3 1240V2) :-)

16GB Ram orginal HP

onboard nic disabled 

ILO is running

with this network card:

Intel X520-DA2 10 Gigabit 10GBe SFP+ Dual Port Ethernet Server Network Adapter

copy over the network with 600MB/s read and write 4x6TB Raid 0😍 what is better as speed? yep more speed

all is working fine:

thank you JUN!!!!

 

image.thumb.png.b151b1049e46a484f093bcad0393e01f.png

 

 

 

 

Edited by nemesis122
  • Like 1
Link to comment
Share on other sites

2 hours ago, nemesis122 said:

Only for the Record my HP Gen 8 is working with the last DSM 6.2.2  24922 

 

Here  are the specification:

 

Xeon 1220L (will upgrade in the near future to E3 1240V2) :-)

16GB Ram orginal HP

onboard nic disabled 

ILO is running

with this network card:

Intel X520-DA2 10 Gigabit 10GBe SFP+ Dual Port Ethernet Server Network Adapter

copy over the network with 600MB/s read and write 4x6TB Raid 0😍 what is better as speed? yep more speed

all is working fine:

thank you JUN!!!!

 

image.thumb.png.b151b1049e46a484f093bcad0393e01f.png

 

 

 

 

Hello nemesis122 !

I thought the 1.03b loader could work only until DSM 6.2-23739. Did you upgrade the DSM automatically?

 

(Plus: do you think the original LAN would work with 6.2.2?

What is the reference of the original you bought? :D)

 

Thanks !!

Link to comment
Share on other sites

Hi

No the Original NIC will not work because its not a intel nic its a HP nic you need a intel nic

I have created the loader 1.03 b vid pid mac sn etc and then directly installed DSM_DS3615xs_24922.pat 

 

in this case that is the server in original as example

https://www.ebay.de/itm/HP-ProLiant-MicroServer-Gen8-Intel-Xeon-E3-1220L-V2-16GB-RAM-2-6TB-HDD-RAID/183808439023?epid=27030601463&hash=item2acbd632ef:g:FTYAAOSwYNRcyblh

 

Edited by nemesis122
Link to comment
Share on other sites

30 minutes ago, nemesis122 said:

Hi

No the Original NIC will not work because its not a intel nic its a HP nic you need a intel nic

I have created the loader 1.03 b vid pid mac sn etc and then directly installed DSM_DS3615xs_24922.pat 

 

in this case that is the server in original as example

https://www.ebay.de/itm/HP-ProLiant-MicroServer-Gen8-Intel-Xeon-E3-1220L-V2-16GB-RAM-2-6TB-HDD-RAID/183808439023?epid=27030601463&hash=item2acbd632ef:g:FTYAAOSwYNRcyblh

 

Onboard nic not workig why? 
There isn't any driver in boot image or what? 
If we have kernel source we can compile HP driver and add this into bootimage 

 

Link to comment
Share on other sites

@mervincm do you know why with the 1.04b loader only works when the montitor is discconected ??

I have als second server en Asus H87iPlus with Intel Xeon 1245 V3 on this maschine only loader 1.02b works great/ 1.03 b not working no Diskstation in  Lan found i think its relaeted to a bios bug in the asus h87i plus / 1.04 b is working but only when i disconnect the monitor from the DVI/HDMI connector.

thank you

 

Edited by nemesis122
Link to comment
Share on other sites

Hi Guys.


I am trying to use this loader on a P8Z68-V Pro with i7 2600K CPU and 32GB of RAM.

 

If I boot it in UEFI mode, the bootloader just hangs completely (the cursor doesn't even flash at all). If I try to boot it in Legacy mode, the cursor remains flashing, and I can see the NAS in the Synology Assistant, but when I install the firmware etc it just does not work (reboots, then it says no boot device).

 

Any ideas on what I'm doing wrong or where I can troubleshoot this?

Link to comment
Share on other sites

Hi Guys!

First off all sorry my probably bad english. I have an hp gen8 and trying to install dsm 6.2, have done everything with mac vid and pid but only thing I see when it starts is hdd is missing. Have tried to follow som intstructions on this forum but nothing helps. Hopefully there is someone who have an answer:).

Kind regars.

Link to comment
Share on other sites

Jun v1.04b - DS918 

have problem with DSM 6.2.2 also with Realtek network.

(r8168 driver on DSM 6.2.1 works)

 

I try to change zImage 6.2.2 with zImage 6.2.1 (leaving the other files) on USB Stick Loader 1.04b

The DSM boot up but it is instable and not work 

 

But if it can help, it seems that the new kernel in 6.2.2 is incompatible with r8168.ko driver (?) present in extra.lzma (?) 

Or i don't understand the problem ? 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...