unmesh Posted January 27, 2019 Share #1176 Posted January 27, 2019 The tutorial reference link says I should be using e1000e and not e1000! Is it safe to shut down the VM and change network adapters or do I need to do something else? Assuming this works, is it then OK to install 6.2.1 from the DSM 6.1.7 GUI? (I will switch from EFI to BIOS too) Quote Link to comment Share on other sites More sharing options...
chipped Posted January 28, 2019 Share #1177 Posted January 28, 2019 (edited) On 1/27/2019 at 4:44 AM, rony said: Hello, what are the DS3617 users doing about updates? Should we wait for a new loader until we can update to 6.2.1? 6.2 has very serious security flaws that have led me to deny my NAS access to the Internet. If you have 4th Gen CPU or newer then you can upgrade using 1.04 loader. The loader is customised to set 16 drives visible on the system on every boot. So it’s all good if you have up to 16 drives. See compatible hardware here Edited January 28, 2019 by chipped Quote Link to comment Share on other sites More sharing options...
Xpusi Posted January 28, 2019 Share #1178 Posted January 28, 2019 Im sorry But IT Dose Not Word for me My System is a ASROCK J4205-ITX with 4GB ddr4 RAM and 2x 1TB hdd drives Im Not able to install dsm 6.2.1 on this System i geht an error 21 Quote Link to comment Share on other sites More sharing options...
rony Posted January 28, 2019 Share #1179 Posted January 28, 2019 6 hours ago, chipped said: If you have 4th Gen CPU or newer then you can upgrade using 1.04 loader. The loader is customised to set 16 drives visible on the system on every boot. So it’s all good if you have up to 16 drives. See compatible hardware here Good morning, thank you for your answer. So I installed a 3617xs. There is no 1.04 loader for that - or do I see it wrong? I have a Skylake CPU (5th generation?) A LSI RAID controller in IT mode. and a Mellanox Connect-X 3 10Gbit NIC. I only use the onboard SATA controller for the SSD cache. I use 8 HDDs, 2 SSD as cache and one SSD as system drive - no virtualization. Quote Link to comment Share on other sites More sharing options...
Olegin Posted January 28, 2019 Share #1180 Posted January 28, 2019 3 минуты назад, rony сказал: There is no 1.04 loader for that - or do I see it wrong? I have a Skylake CPU (5th generation?) On 1.04 you must install 918 DSM only! Read this. Quote Link to comment Share on other sites More sharing options...
rony Posted January 28, 2019 Share #1181 Posted January 28, 2019 51 minutes ago, Olegin said: On 1.04 you must install 918 DSM only! Read this. So I have to change from 3617xs to 918+ to upgrade to version 6.2.1? Quote Link to comment Share on other sites More sharing options...
Olegin Posted January 28, 2019 Share #1182 Posted January 28, 2019 1 минуту назад, rony сказал: So I have to change from 3617xs to 918+ to upgrade to version 6.2.1? Yes. Quote Link to comment Share on other sites More sharing options...
TeleDDim Posted January 28, 2019 Share #1183 Posted January 28, 2019 (edited) On 11/9/2018 at 10:26 AM, ideasman69 said: J3455B-ITX: works J3455-M: works J3455-ITX: i915 driver fails which explains why /dev/dri is missing: The same issue on Asrock J4205ITX, MCDP2800 chip is on both MB. I think that this bug is the source of this issue, but i don't know ho to fix it ( Edited January 28, 2019 by TeleDDim Quote Link to comment Share on other sites More sharing options...
mcdull Posted January 28, 2019 Share #1184 Posted January 28, 2019 Is E3 1275v2 a 4th Gen CPU? Quote Link to comment Share on other sites More sharing options...
Olegin Posted January 28, 2019 Share #1185 Posted January 28, 2019 18 минут назад, mcdull сказал: Is E3 1275v2 a 4th Gen CPU? No, it's 3rd. Quote Link to comment Share on other sites More sharing options...
mcdull Posted January 28, 2019 Share #1186 Posted January 28, 2019 That's bad. So I am stopped at 3615xs. Hope it can still be supported. 12 minutes ago, Olegin said: No, it's 3rd. Quote Link to comment Share on other sites More sharing options...
rony Posted January 28, 2019 Share #1187 Posted January 28, 2019 3 hours ago, Olegin said: Yes. All right - is there a guide that you can recommend that I use for the change? Quote Link to comment Share on other sites More sharing options...
Olegin Posted January 28, 2019 Share #1188 Posted January 28, 2019 3 минуты назад, rony сказал: All right - is there a guide that you can recommend that I use for the change? Use and enjoy 😉 Quote Link to comment Share on other sites More sharing options...
Olegin Posted January 28, 2019 Share #1189 Posted January 28, 2019 (edited) 4 часа назад, rony сказал: LSI RAID controller in IT mode. and a Mellanox Connect-X 3 10Gbit NIC. Ups... stop! It seems that this hw will not work on 1.04. Скрытый текст alx.ko atl1.ko atl1c.ko atl1e.ko ax88179_178a.ko bnx2.ko BusLogic.ko button.ko cnic.ko e1000.ko ixgbe.ko jme.ko libphy.ko mdio.ko megaraid.ko megaraid_mbox.ko megaraid_mm.ko megaraid_sas.ko mii.ko mptbase.ko mptctl.ko mptsas.ko mptscsih.ko mptspi.ko netxen_nic.ko ohci-hcd.ko pcnet32.ko qla3xxx.ko qlcnic.ko qlge.ko r8168.ko r8169.ko scsi_transport_spi.ko sfc.ko skge.ko sky2.ko tg3.ko uio.ko usbnet.ko vmw_pvscsi.ko vmxnet3.ko Edited January 28, 2019 by Olegin Quote Link to comment Share on other sites More sharing options...
rony Posted January 28, 2019 Share #1190 Posted January 28, 2019 (edited) 23 minutes ago, Olegin said: Ups... stop! It seems that this hw will not work on 1.04. List of bild in drivers on 1.04 (Hide contents) alx.ko atl1.ko atl1c.ko atl1e.ko ax88179_178a.ko bnx2.ko BusLogic.ko button.ko cnic.ko e1000.ko ixgbe.ko jme.ko libphy.ko mdio.ko megaraid.ko megaraid_mbox.ko megaraid_mm.ko megaraid_sas.ko mii.ko mptbase.ko mptctl.ko mptsas.ko mptscsih.ko mptspi.ko netxen_nic.ko ohci-hcd.ko pcnet32.ko qla3xxx.ko qlcnic.ko qlge.ko r8168.ko r8169.ko scsi_transport_spi.ko sfc.ko skge.ko sky2.ko tg3.ko uio.ko usbnet.ko vmw_pvscsi.ko vmxnet3.ko Dude, you're about to mess with my head. So the LSI controller is currently working. And the Mellanxo NIC is in Synology's supported hardware list. Currently I'm running Loader 1.03 and DSM 6.2. But it is possible that the hardware would not work anymore? edit... Wait a minute .. in your list ist megaraid - and "Megaraid" in a productname for the LSI raidcontroller Edited January 28, 2019 by rony Quote Link to comment Share on other sites More sharing options...
Olegin Posted January 28, 2019 Share #1191 Posted January 28, 2019 21 минуту назад, rony сказал: So the LSI controller is currently working. And the Mellanxo NIC is in Synology's supported hardware list. Better safe than sorry. If you did not add any drives in extra.lzma by yourself or not use modified by IG-88 1.04 will work. Quote Link to comment Share on other sites More sharing options...
rony Posted January 28, 2019 Share #1192 Posted January 28, 2019 30 minutes ago, Olegin said: Better safe than sorry. If you did not add any drives in extra.lzma by yourself or not use modified by IG-88 1.04 will work. mmmh, i think i'll disconnect the HDD for my updated installation, and reinstall it with the Loader 1.04 - then i'll check with a dummy HDD if everything works - if so, i'll try to downgrade from 3617xs to 918+ somehow Quote Link to comment Share on other sites More sharing options...
Olegin Posted January 28, 2019 Share #1193 Posted January 28, 2019 9 минут назад, rony сказал: mmmh, i think i'll disconnect the HDD for my updated installation, and reinstall it with the Loader 1.04 - then i'll check with a dummy HDD if everything works - if so, i'll try to downgrade from 3617xs to 918+ somehow It's good idea. I'm always test new loaders and DSM versions on clean old HDD and disconnecting work HDDs and SSD. Quote Link to comment Share on other sites More sharing options...
flyride Posted January 28, 2019 Share #1194 Posted January 28, 2019 6 hours ago, rony said: Good morning, thank you for your answer. So I installed a 3617xs. There is no 1.04 loader for that - or do I see it wrong? I have a Skylake CPU (5th generation?) A LSI RAID controller in IT mode. and a Mellanox Connect-X 3 10Gbit NIC. I only use the onboard SATA controller for the SSD cache. I use 8 HDDs, 2 SSD as cache and one SSD as system drive - no virtualization. DS918 probably will not properly support your add-in cards. You should also be able to use 1.03b and DS3615xs You must also use the Intel NIC for it to boot. But ask yourself why you want to upgrade, and if you still must, test compatibility thoroughly before you commit your data. Quote Link to comment Share on other sites More sharing options...
flyride Posted January 28, 2019 Share #1195 Posted January 28, 2019 15 hours ago, unmesh said: The tutorial reference link says I should be using e1000e and not e1000! Is it safe to shut down the VM and change network adapters or do I need to do something else? Assuming this works, is it then OK to install 6.2.1 from the DSM 6.1.7 GUI? (I will switch from EFI to BIOS too) Yes, you can change vNIC when you want, same with Legacy Boot vs. EFI. Quote Link to comment Share on other sites More sharing options...
rony Posted January 28, 2019 Share #1196 Posted January 28, 2019 4 minutes ago, flyride said: DS918 probably will not properly support your add-in cards. You should also be able to use 1.03b and DS3615xs You must also use the Intel NIC for it to boot. But ask yourself why you want to upgrade, and if you still must, test compatibility thoroughly before you commit your data. Unfortunately my motherboard has only one Realtek network card, which doesn't work anymore since the upgrade from 6.1 to 6.2 - but for me it's not a pain, because I use the 10Gbit network card anyway. I want to update because I am afraid that my NAS can be attacked from the outside by the open security holes in 6.2. And I just don't like completely encrypted data or the like Quote Link to comment Share on other sites More sharing options...
flyride Posted January 28, 2019 Share #1197 Posted January 28, 2019 The only way you will be able to run 6.2.1 then will be to run DS918 and compiled drivers to support your cards (which may not exist at this point). What's wrong with the security fixes in 6.1.7 U3? Quote Link to comment Share on other sites More sharing options...
rony Posted January 28, 2019 Share #1198 Posted January 28, 2019 6 minutes ago, flyride said: The only way you will be able to run 6.2.1 then will be to run DS918 and compiled drivers to support your cards (which may not exist at this point). What's wrong with the security fixes in 6.1.7 U3? Because, as I wrote above, I am on version 6.2 (23739). Quote Link to comment Share on other sites More sharing options...
Vodka2014 Posted January 28, 2019 Share #1199 Posted January 28, 2019 Hi All Does Intel I350T2V2 Dual work with DS3615xs Loader 1.03b On DSM 6.2.1 Thanks Quote Link to comment Share on other sites More sharing options...
freddan83 Posted January 29, 2019 Share #1200 Posted January 29, 2019 Im running 1.03b and 3615.. Is it possible to update to 6.21 and use a lsi 9220-8I pcie card? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.