Jump to content
XPEnology Community

DSM 6.2-23739 Update 2


XerSonik
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel SS4200 

- Additional comments: Updated my USB-Stick and then migrated my system. Worked without any problems.

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MicroServer Gen7 N54L (bios mod, CE1 Off)

- Additional comments: Migration and update to U2 ok (I replaced my USB key because there were special characters in the name that crashed the loader v1.03b).

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: Jun Loader V1.03b - DS3617xs 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -ASRock C2550D4I

- Additional comments: Reboot needed after update.  When I first updated from DSM 6.1.7-15284, I needed to delete .xpenoboot from the root directory of my NAS.

Edited by pastrychef
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: Jun Loader V1.03b - DS3615xs 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Elite 8200 LGA1155 (Intel I5 2400)

- Additional comments: Turn OFF uefi boot in bios (no LAN). Only legacy boot.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284

- Loader version and model: Jun Loader V1.03b - DS3617xs 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -MSI C847MS-E33 - Intel Celeron 847 

- Additional comments: update loader from V1.02b to V1.03b, migrate to DSM 6.2-23739, after update to DSM 6.2-23739 Update 2

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO/YES (tried both)

- Installation type: BAREMETAL - Gigabyte GA-B75N, Intel B75 chipset

- Additional comments: updated loader from v1.02b to v1.03b, loader booted with no network detection

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 1

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7

- Additional comments: HAD TO CHANGE BOOT DISK TO SATA AND NIC TO E1000E, STATIC IP GOT REVERTED TO DHCP TOO

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 1

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MicroServer Gen8

- Additional comments: Updated to DSM 6.2-23739 Update 2 no problem

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MicroServer Gen8 with Xeon 1265L and LSI SAS9220-8i in IT Mode.

- Additional comments: nothing. All went smooth.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 1

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte B360M-HD3 with Intel I5-8400

- Additional comments: DiskStation cannot be found on LAN with UEFI mode, legacy bios work fineIntel 10Gb X550-T2 work good - All data intact all apps still loaded

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L AMD Turion II Neo N54L Dual-Core -2WD-Red-4TB-RAID1

- Additional comments: Migration and update to DSM 6.2 -23739 Update2 sucessful without any bootoptions or selctions in juns's loader 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2-23739 UPDATE 1
- Loader version and model: JUN'S LOADER v1.03a2 - DS3617xs
- Using custom extra.lzma: NO
- Installation type: VM - ESXi 6.5.0 - 2 x E5-2660V2 on Intel W2600CR 
- Additional comments: Has to add SATA Controller, and change loader's virtual devic node as SATA(0:0)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 6.2-23739 UPDATE 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Q1900B-ITX

- Additional comments: None

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-B85M-HD3

- Additional comments: Try few times, only success when change the bios to legacy mode

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: ESXi 6.7 (1 vDisk, thick provisioned on a WD30EFRX) see disk setup below

- Additional comments: No issues for the past 6hrs

 

 

2018-10-06_14-10-30_vSphere - NAS00 - Summary_003211.png

Link to comment
Share on other sites

 Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 1

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MicroServer Gen8

- Additional comments: No network access

Link to comment
Share on other sites

Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI B85M-E45

- Additional comments: No network access (as expected).

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI B85M-E45 + HP NC360T (based on the Intel 82571EB chipset)

- Additional comments: Due to my expected failure (the post just above), I made a "HotFix", by adding an external NIC, and booted up OK. BTW: you might need to edit the MAC in grub.cfg after adding a NIC..

Link to comment
Share on other sites

- Outcome of the Upgrade: SUCCESSFUL

- DSM version prior update: DSM 6.1.7 u1

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS H87-i PLUS with i3 CPU

- Additional comments: Upgrade kept all bonds in place (after 'migrate' install, which was through another temporary DHCP IP until the install completed - then it changed itself back to my static IPs). Internal NIC works fine..

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MediaSmart EX490 with Celeron 450 / 2GB Ram

- Additional comments: After initial reboot system stops responding to pings and is inaccessible

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: NO (fresh install)

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L (2GbRAM)

- Additional comments: Disabled C1E BIOS option, edited VID,PID,MAC, S/N

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...