kpas Posted August 6, 2018 Share #26 Posted August 6, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK J3455-ITX - Additional comments: Need to Enable CSM in BIOS and boot in Legacy Mode. Otherwise won't able to see in the network Quote Link to comment Share on other sites More sharing options...
pigr8 Posted August 6, 2018 Share #27 Posted August 6, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: HP Gen8 - ESXi 6.5u2 (build 8935087), CougarPoint in passthrough - Additional comments: upgraded from 6.1.7-15284 Update 2 (loader 1.02b) to 6.2-23739 Update 2 (loader 1.03b) without a problem, everything went perfect.. loader is a vmdk sata disk, the controller where the disks are physically attached is in passthrough to the VM so that has native control, nothing was lost. Quote Link to comment Share on other sites More sharing options...
jensmander Posted August 6, 2018 Share #28 Posted August 6, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: none - clean install, installed Update 2 successfully after installation - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - MSI B250M BAZOOKA, Pentium G4400T, 2x8GB DDR4 2133, onboard Realtek 8111H Gbit LAN, LSI 9260-8i with 2x320GB RAID1 & 6x2TB RAID5, 1x onboard S-ATA KINGSTON 120GB SSD for Cache - Additional comments: REBOOT, OK - After installing Update 2 for DSM 6.2 the network speed of the Realtek 8111H drops to ~10-12MB/s which is equal to 100mbit... I cleaned the installation from all HDDs and started it again. When installing the "initial" PAT file everything regarding to network speeds runs fine, even after several reboots and settings. But as soon as I install Update 2 -> drop to max. 12MB/s... 😥 Quote Link to comment Share on other sites More sharing options...
hoidoi Posted August 6, 2018 Share #29 Posted August 6, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 1 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen10 with AMD Opteron X3216 - Additional comments: UEFI doesn't work, CSM is necessary - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 1 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen10 with AMD Opteron X3216 - Additional comments: UEFI doesn't work, CSM is necessary Quote Link to comment Share on other sites More sharing options...
fannoute Posted August 7, 2018 Share #30 Posted August 7, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MediaSmart EX490 with Xeon E3110 - Additional comments: NONE Quote Link to comment Share on other sites More sharing options...
Lestat Posted August 8, 2018 Share #31 Posted August 8, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 15284 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N40L - Additional comments: Reboot required - No Problems - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 15284 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L - Additional comments: Reboot required - No Problems Quote Link to comment Share on other sites More sharing options...
grubia Posted August 8, 2018 Share #32 Posted August 8, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen8 with XEON 1265v2 16GB RAM - Additional comments: Prior to installation I've removed powerbutton package. Reboot required - No Problems / Installed DSM 6.2-23739, then DSM 6.2-23739-u1, then DSM 6.2-23739-u2. / Everithing works fine(10 dockers, 1VM, custom OpenVPN configuration), network speeds are as expected. Quote Link to comment Share on other sites More sharing options...
EnanoRojo Posted August 9, 2018 Share #33 Posted August 9, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: 6.1.7 Update 2 with Jun's loader v1.02b - Loader version and model: Jun's Loader v1.03b - DS3617 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Prodesk 600 G1 (Intel G3220). - Additional comments : I changed the file system to adapt it to the MBR partition and use the legacy boot (for this I used the file of @Genesys, included in the post "Links to Loaders" of @Polanskiman). - Thanks for your effort @Jun, and all team that supports this forum. Quote Link to comment Share on other sites More sharing options...
MichelD Posted August 9, 2018 Share #34 Posted August 9, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: Baremetal Gigabyte GA-H55-UD3H rev 1.0; i3-550; Onboard NIC RTL8111D - Additional comments: upgraded from 6.1.7-15284 Update 2 (loader 1.02b) to 6.2-23739 (loader 1.03b), choosing migration. After reboot, had to change IP settings back to manual using Synology assistant; then upgraded from GUI to DSM 6.2-23739 Update 2. A few packages to update. No issues so far. Quote Link to comment Share on other sites More sharing options...
Takuan Posted August 10, 2018 Share #35 Posted August 10, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock Rack D1520-D4i with LSI 9211-8i IT - Additional comments: REBOOT - alterations to synoinfo.conf not overwritten Quote Link to comment Share on other sites More sharing options...
JBark Posted August 11, 2018 Share #36 Posted August 11, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen8 with XEON 1265v2 - Additional comments: Previous attempts to upgrade from 6.1 to 6.2 failed, as all services, including networking, would shutdown a few seconds after logging in to DSM. Saw other posts mentioning an old .xpenoboot folder in / as the cause, so I deleted that and upgrade worked fine. I've been running XPenology on this same server for over 3 years now, so I'm not surprised there's a bunch of old crap laying around that could cause these problems. 1 Quote Link to comment Share on other sites More sharing options...
Nick Xiong Posted August 11, 2018 Share #37 Posted August 11, 2018 Outcome of the update: UNSUCCESSFUL DSM version prior update: DSM 6.2-23739 Update 1 Loader version and model: JUN'S LOADER v1.03b - DS3615xs Using custom extra.lzma: NO Installation type: BAREMETAL - HP Microserver GEN 8 - Intel(R) Xeon(R) CPU E3-1265L @ 2.40GHz,using Smart Array P222 Controller( 4x SATA disks HDD, 3.5 ) and 1x SATA disk (1T 2.5 hdd) Additional comments: DSM 5.2 Updated.1x SATA disk (1T 2.5 hdd) is OK! Failed to find Smart Array P222 Controller! Quote Link to comment Share on other sites More sharing options...
synologyturkey Posted August 11, 2018 Share #38 Posted August 11, 2018 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock N3700-ITX Additional comments: REBOOT Quote Link to comment Share on other sites More sharing options...
Hostilian Posted August 11, 2018 Share #39 Posted August 11, 2018 - Outcome of the update: SUCCESSFUL (with caveat) - DSM version prior update: DSM 6.1.7 u2 (DS3617xs) - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock J3455-ITX, using Intel NIC, 16GB RAM and 3x SATA disks (SSD, SSD, 3.5). - Additional comments: Upgrade went fine to 6.2 (now Update 2) - but write transfer speeds about about 60-70% of what they were (I think). Read speeds look ok.. Quote Link to comment Share on other sites More sharing options...
Hyperbit Posted August 12, 2018 Share #40 Posted August 12, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 2 - Loader version and model: JUN'S LOADER v1.03a2 - DS3615 - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK Q1900 - Additional comments: work like a charm Quote Link to comment Share on other sites More sharing options...
refrain Posted August 12, 2018 Share #41 Posted August 12, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK J3455-ITX - Additional comments: hardware transcoding does not work(with vaild SN/MAC) and reboot process is very slow Quote Link to comment Share on other sites More sharing options...
tiwipewo Posted August 13, 2018 Share #42 Posted August 13, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 update 2 for DS3615XS - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L + 8 Go Ram + USB3 controler - Additional comments: Worked out of the box. First migrated from DS3615XS to DS3617XS on 6.1.7 with Jun's 1.02b then updated to 6.2u2 with 1.03b Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 5.2 for DS3615XS - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - MSI B75MA-P45 + i7 3770 (Ivy Bridge) + 16 Go Ram + Marvel 88SE9215 4 port SATA controller - Additional comments: Migration from 5.2 to 6.1.7 worked ok directly (tutorial). DSM 6.2 didn't see my RTL8111e network card, added an Intel PRO/CT 1000 and declared it with first MAC address. Then update to 6.2u2 went Ok. All disks found, even on Marvel controller. Quote Link to comment Share on other sites More sharing options...
kretzu77 Posted August 13, 2018 Share #43 Posted August 13, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen8 with XEON 1265v2 16GB RAM - Additional comments: Reboot needed Quote Link to comment Share on other sites More sharing options...
Messenger Posted August 13, 2018 Share #44 Posted August 13, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 15284 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L - Additional comments: must delete .xpenoboot folder to get access to network and filesystem in dsm Quote Link to comment Share on other sites More sharing options...
tope Posted August 14, 2018 Share #45 Posted August 14, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: 6.1.7-15284 Update 1 - Loader version and model: Jun's Mod V1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HPE Proliant MicroServer Gen8 - Additional comments: REBOOT REQUIRED Quote Link to comment Share on other sites More sharing options...
mikepey Posted August 18, 2018 Share #46 Posted August 18, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver GEN 8 - Additional comments: NONE Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted August 21, 2018 Share #47 Posted August 21, 2018 Deleted a bunch of posts from people who don't know how to read the big fat red box at the top of the topic. 1 Quote Link to comment Share on other sites More sharing options...
aol Posted August 21, 2018 Share #48 Posted August 21, 2018 - Outcome of the update: SUCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - GA-Z170X-UD3 - Additional comments: Had just gone from a DS3615 on Jun's v1.02b loader running DSM 6.1.x to DS918+ on Jun's 1.03a2 loader, chose to install clean rather than migrate, all ok Quote Link to comment Share on other sites More sharing options...
canastel Posted August 29, 2018 Share #49 Posted August 29, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: Jun's Mod V1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL -ASROCK H110M-DGS / CPU i7 7700K - Additional comments: Login page and all loaded quickly. Quote Link to comment Share on other sites More sharing options...
canastel Posted August 29, 2018 Share #50 Posted August 29, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 2 - Loader version and model: Jun's Mod V1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL -ASROCK H110M-DGS / CPU i7 7700K - Additional comments: All OK Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.