Jump to content
XPEnology Community

DSM 6.2-23739 Update 2


XerSonik
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

Screen Shot 2018-07-16 at 12.10.08 AM.jpg

 

https://www.synology.com/en-global/releaseNote/DS3615xs

Release Note: Version: 6.2-23739-2

Version: 6.2-23739-2

(2018-07-12)

Important Note

The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS if you are using the models listed below.

XS Series : RS2818RP+, RS3618xs, RS2418RP+, RS2418+, FS1018, DS3018xs, RS818RP+, RS818+, FS3017, FS2017, RS4017xs+, RS3617xs, RS3617RPxs, DS3617xs, RS3617xs+, RS18017xs+, RS2416RP+, RS2416+, RS18016xs+, DS3615xs, RC18015xs+, RS815RP+, RS815+, RS3614xs, RS3614RPxs, RS3614xs+, RS3413xs+, RS10613xs+, DS3612xs, RS3412xs, RS3412RPxs, DS3611xs, RS3411xs, RS3411RPxs

Plus Series : DS1618+, DS918+, DS718+, DS218+, DS1817+, DS1517+, DS2415+, DS1815+, DS1515+, DS415+

Value Series : DS418play

Others : VirtualDSM, DDSM

Fixed Issues

Adjusted power saving mechanism to improve PCIe compatibility.

Fixed multiple security vulnerabilities regarding Linux kernel (Synology-SA-18:01).

Fixed an issue where iSCSI Manager might not open for the incompatible format of iSCSI LUN configuration files set up before DSM 5.2.

Enhanced package start-up performance.

Fixed a security vulnerability (Synology-SA-18:36).

Edited by Polanskiman
Edited to conform to Guidelines. Next time READ THE READ ME topic.
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J3455-ITX  

- Additional comments: Reboot is very slow, as usual: at least 5 minutes.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - H110M-ITX - G4560 

- Additional comments: Login page loaded quickly, actually being usable took a couple minutes.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL Poweredge T30 (Intel Xeon)  

- Additional comments: Reboot required - No Problems

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: Baremetal - Supermicro x10slm+-f, e3-1220v3

- Additional comments: No issues, reboot less than 5 minutes.

Link to comment
Share on other sites

- Outcome of the update: SUCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-N3150N-D3V  

- Additional comments: REBOOT, OK!

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J3455-ITX   

- Additional comments: Board has 2 SATA ports only so two more 2 port cards added.

Reboot is much faster than prior to update. This is quite a snappy unit now

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: 1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-N3150N-D3V  

- Additional comments: REBOOT, OK!

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

DSM version prior update: DSM 6.2-23739 UPDATE 1

Loader version and model: JUN'S LOADER v1.03a2 - DS918+

Using custom extra.lzma: NO

Installation type: ESXi 6.5

Additional comments: REBOOT, OK!

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J4205-ITX  

- Additional comments: Everything is working fine.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte Z370M D3H (Intel Core i3-8100)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J4205-ITX  

- Additional comments: hardware transcoding does not work

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Fatal1ty AB350 Gaming-ITX/ac + AMD Ryzen 5 1600

- Additional comments: System stucks at the "Intro"

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 1

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MicroServer Gen10 with AMD Opteron X3216

- Additional comments: The loader boot, but no network connection possible, router did not provide ip to NIC (Broadcom 5720) 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: Bare Metal Gigabyte B75M-D3H with Intel E3-1245v2

- Additional comments: DiskStation cannot be found on LAN with UEFI mode, legacy bios work fine.

Mellanox MNPA19-XTR not working before system installation done, have to use onboard LAN adapter for upgrade.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L with additional Intel Dual 1Gb NIC

- Additional comments: Migration and update to U2, MAC of the bond changed from builtin NIC to Intel NIC, but all three still visible and bond works.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver GEN 8 - Intel(R) Xeon(R) CPU E3-1220L V2 @ 2.30GHz 

- Additional comments: Blank install than updated

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

-  Using custom extra.lzma: NO

- Installation type: VM - VirtualBox 5.2.16 (Host: Dell Latitude E7440, i5-4300U)

- Additional comments: Reboot Required, migrated from JUN'S LOADER v1.02b - DS3617xs to DSM 6.2-23739 and updated to U2.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J3455M with IBM Raid-Controller M1015 (IT-Mode) -> SAS-HDDs and two SSDs (SATA) for cache

- Additional comments: Loading of the webinterface takes longer then before... Otherwise everything is up and running like before :)

Edited by longcat
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7 (DS3615xs)

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - (old Dell Optiplex 755)

- Additional comments: Upgraded from DS3615xs (DSM 6.1) to DS3617xs (DSM 6.2) without a problem - with Intel NIC..

 

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.1.7 u2 (DS3617xs)

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

-  Using custom extra.lzma: NO (is there one for 1.03b?)

- Installation type: BAREMETAL - ASRock J3455, using realtek onboard NIC,  16GB RAM and 3x SATA disks (SSD, SSD, 3.5).

- Additional comments: Failed to find on network following boot.. Will re-try with an Intel NIC..

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL OPTIPLEX  9020

- Additional comments: None

Link to comment
Share on other sites

 Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 UPDATE 1

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L

- Additional comments: Blank install as a test than updated via migration. All data intact all apps still loaded. New USB with new v1.03b custom grub.cfg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...