Jump to content
XPEnology Community

User Reported Compatibility Thread for DSM 6.2


Recommended Posts

First try;

Loader version and type:  1.04b without extras and DS918+

DSM version in use (including critical update):  Clean install of DSM 6.2.3-25426 Update 2

Hardware details:  HPE Proliant MicroServer Gen 10+ (P16006-421) + dedicated ilo5 card + 1 old WD Red 3TB ERFX

Details: UEFI bios active and ilo card also connected to network without problem

 

Comments: Only 2 out of 4 nic detected

 

Second try:

Loader version and type:  1.03b without extras and DS3617XS+ 

DSM version in use (including critical update):  Clean install of DSM 6.2.3-25426 Update 2

Hardware details:  HPE Proliant MicroServer Gen 10+ (P16006-421) + dedicated ilo5 card  + 1 old WD Red 3TB ERFX

Details: Legacy bios active and ilo card installed but not connected to network. Could been some hiccup in my network.

 

Comments: All 4 nic's detected

 

And to summarize, "out of the box" performance is much better with 1.03b and DS3617XS+ on the HPE MSG10+. Don't ask me why but simpel tasks take less than half the time.

  • Like 1
Link to comment
Share on other sites

Loader version and type: 1.04b DS918+
DSM version in use (including critical update): DSM 6.2.3-25426 (Unable to apply Update)
Using custom modules/ramdisk?: no
Hardware details: Asus J4005I-C
LAN: Realtek RTL8111H
Comments: Added a M.2 A+E Key Gigabit Ethernet Realtek RTL8111H working well

Link to comment
Share on other sites

Loader version and type: 1.04b DS918+ (no customizations)
DSM version in use (including critical update): DSM 6.2.3-25426
Hardware details: AsRock J3455B-ITX, generic Marvell 88SE9215 PCIE controller /w 4x SATA III
Comments: Fresh install on bare metal; 1st boot after installing DSM approx 15-20 mins, NAS not available; then automatic reboot and again setting up for 5-10 mins; then works normally.

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

- Result: SUCCESSFUL (ONLY DS918+)
- Loader version and model (clean install): Jun's Loader v1.04b
- Version DSM: tried DSM 6.2.2-24922 and 6.2.3-25426
- Additional module extra.lzma, extra.2lzma: YES (also replace the zImage and rd.gz from the installed DSM for 6.2.3-extra918plus_v0.13.3, for 6.2.2 extra918plus_loader_1.04b_DSM 6.2.2.v0.8_std_mod)
- Hardware: ASRock H310CM-HDV, BIOS P4.20 05/14/2019, RAM 8GB, Intel Pentium Gold G5420
- RAM: 2 x 4Gb DDR4, 2666 МГц, PC21300

- Ethernet: internal RTL8168h/8111h, and also tried external PCI-E DEXP ZH-GE1P, chip RTL8111E 

 

BIOS settings:

- Use CSM - UEFI Only

- Disable all unnecessary things, virtualization, and etc.

 

IMPORTANT!

- If you reinstall DSM several times (for example, you are experimenting), be SURE to delete all partitions from all disks, otherwise you will get error 13 during installation.

 

DMESG list

Edited by allex
Link to comment
Share on other sites

  • 3 weeks later...

Outcome of the update: SUCCESSFUL

- DSM version prior update: 6.2.3-25426 update 2

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Alibaba Intel Celeron C3865u Skylake onboard, ITX form factor, 16gb RAM, 12 x SATA port via 3 x Marvell 88SE9215 onboard controller, PCIe 8x slot, Dual Intel 211 integrated NIC, 9 x 4TB drives

- Additional Comment: Reboot required after update


- Outcome of the update:  SUCCESSFUL

- DSM version prior update: 6.2.3-25426 update 2

- Loader version and model: JUN'S LOADER v1.0b - DS3615

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - SOYO J1900 Quad Core 2.4Ghz mATX board, additional Intel 1GB NIC, 4 GB RAM, LSI 8 port SAS controller, 8 x 5TB drives, 2 x onboard sata spare

- Additional comments: Reboot required

Link to comment
Share on other sites

Loader version and type:  1.04b / DS918+

DSM version in use (including critical update):  DSM 6.2.3-25426

Hardware details:  HP ProDesk 600 G1, motherboard: Hewlett-Packard 18E7, PCI-E TP-LINK Archer T6E WLAN (Broadcom BCM4360)
Using custom extra.lzma: NO

Details:  Everything fine, except WLAN - not working at all.

Link to comment
Share on other sites

Loader version and type:  1.04b / DS918+

DSM version in use:  install of DSM 6.2.3-25426 Update 2

Hardware details: Dell Poweredge T40, with 2 WD Red pro NAS drives

Using custom extra.lzma: Yes, aswell as i915 mod

BIOS: UEFI bios active, set to AHCI controller instead of Raid just in case.

 

Notes: dropped in my NAS drives from my old ds212j, and DSM just picked up from where it left off, from before the switch - breezy

Link to comment
Share on other sites

Loader version and type: 1.04b DS918+
DSM version in use (including critical update): DSM 6.2.3-25426 Update 2
Using custom modules/ramdisk?: No.
Hardware details: ASRock N3150M, 4Gb ram. 
LAN: Realtek RTL8111GR Gigabit
SATA3: unknown... to me... ;)
Comments: clean install.

Link to comment
Share on other sites

  • 4 weeks later...

Loader version and type: 103b    3615xs

DSM version in use (including critical update): DSM 6.2.3-25426 Update 3

Using custom modules/ramdisk? If yes which one?: Yes, extra.lzma for 3615 v0.11_test

Hardware details:

      Motherboard - MSI ms-7641 version 3.0 (Socket AM3+)
      CPU - AMD Sempron 145 2.8Ghz
      4GB DDR3 RAM
      NIC - Realtek RTL8111E

 

Notes:  Had to set PCI Video bios option from "auto" to "disabled" for it to boot (with network).... which I though was odd. Took a few hours of trial and error to find that.  Happy New Year!  

Link to comment
Share on other sites

Outcome of the Install: SUCCESSFUL

- DSM version: 6.2.3-25426 update 3

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte H410M H (Micro ATX), Pentium G6400, 8 GB DDR4, 4 x SATA Onboard, PCIE x1 x 2, Realtek Onboard NIC 8118 Chipset, TPLink TG-3468 Addon, 4 x 2 TB SATA Drives

- Additional Comment: Both LAN cards detected without any additional configuration or mod. Works Fine with UEFI boot

Edited by vvisor
Link to comment
Share on other sites

  • 4 weeks later...

Outcome of the update: SUCCESSFUL

- DSM version: 6.2.3-25426 update 3

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Installation type: BAREMETAL

- Hardware: ASRock B365M Pro4, LGA1151 microATX, 6x SATA,

   CPU: Intel Core i5 9400 BOX,

   RAM: Crucial 16 GB DDR4 PC4-25600

- Additional Comment: Everything detected without additional configuration or mod

Edited by Nett1
  • Thanks 1
Link to comment
Share on other sites

On 5/22/2019 at 9:05 PM, Sass said:

Loader: Jun's Loader v1.04b for DSM 6.2 (on USB 2.0 Stick Intenso Micro Line 4 GB)

DSM: DSM 6.2.1-23824 Update 6 - DS918+

 

Bare Metal (build and installed in 05.2019)

Motherboard: ASUS P11C-I (Mini-ITX)

Chipset: Intel C242

CPU: Intel Core i3-8100 (Socket 1151v2) 4x 3.60GHz

RAM: 2x 8GB G.Skill Aegis DDR4-2400 DIMM CL15 (running as DDR4-2100 according to BIOS)

Integrated NIC: 2x Gb LAN (Intel I210-AT)

HDDs SATA: 3x 8TB WD80EFAX (WD Red)

SDD Cache: 2x 120GB Crucial BX500 (SATA)

NVMe SDD: 512 GB WesternDigital/SanDisk PC SN520 (M.2 2242, PCIe 3.0) >> reported as model WD5000-BEVT in DSM Disk Manager >> NOT working, DSM displays "I/O-Error" in Disk Manager protocols

 

Other than the NVMe SDD, the system works as a charm, including both GB-LAN ports.

I removed the NVMe SDD. Also, I still have an SATA-Port available, so I'll add another big SATA SDD soon. Also, I plan to get a PCIe LAN Card with 2x 10GBE (RJ-45), but am currently unsure which model would be working out-of-Jun's-box.

 

MANY THANKS to JUN and all Forum Members, who's information helped me pinpoint the necessary hardware for my Server!!!

Hi. Could you please confirm that your MB supports HW video transcoding ?

Link to comment
Share on other sites

On 2/2/2021 at 7:38 PM, Nett1 said:

Outcome of the update: SUCCESSFUL

- DSM version: 6.2.3-25426 update 3

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Installation type: BAREMETAL

- Hardware: ASRock B365M Pro4, LGA1151 microATX, 6x SATA,

   CPU: Intel Core i5 9400 BOX,

   RAM: Crucial 16 GB DDR4 PC4-25600

- Additional Comment: Everything detected without additional configuration or mod

Hello.

 

does m.2 drives also detected and if transcoding works?

 

Thank you very much for your answer.

 

Link to comment
Share on other sites

Result: SUCCESSFUL (DS918+)
Loader version and model (clean install): Jun's Loader v1.04b
Version DSM: DSM 6.2.3-25426 Update 3

Additional module extra.lzma, extra.2lzma: YES (only for HW transcoding, everything else work fine without it)

 

Bare Metal

Motherboard: ASRosck b365m-itx/ac

Chipset: Intel B365

CPU: Intel Core i3-8100 (Socket 1151v2) 4x 3.60GHz

RAM: 2x 4GB DDR4-2400 DIMM

Integrated NIC: Intel I219V

 

Link to comment
Share on other sites

  • 2 months later...

Result:                       SUCCESSFUL (migration DS3615xs to DS918+)

Old loader version:   Jun's Loader v1.02b

Old version DSM:      DSM 6.1.7-15284 update 3
New loader version: Jun's Loader v1.04b
New version DSM:    DSM 6.2.3-25426 update 3

Additional module extra.lzma, extra.2lzma: NO

 

Bare Metal

Motherboard:             GA-B250M-DS3H

Chipset:                      Intel B250

CPU:                            Intel Core i5-6500 (Socket 1151v1)

RAM:                           8GB DDR4-2400 DIMM

Integrated NIC:          Realtek RTL 8111G

Hard disk:                      4 x 4 TB Seagate Ironwolf raid5 and 2 x 3 TB Seagate Ironwolf raid1

Edited by ssarosi
  • Like 1
Link to comment
Share on other sites

Result:                       SUCCESSFUL

Loader version:        Jun's Loader v1.04b
DSM:                         DSM 6.2.3-25426

Additional module extra.lzma, extra.2lzma: NO

 

Bare Metal

Motherboard:             ASROCK J3355B-ITX

CPU:                            Intel Dual Core J3355

RAM:                           8GB DDR3

Integrated NIC:          Realtek RTL8111GR

Hard disk:                   1 x 1 TB (will try later with 2 disk)

Link to comment
Share on other sites

  • 3 weeks later...
On 4/29/2021 at 7:10 PM, ssarosi said:

Result:                       SUCCESSFUL (migration DS3615xs to DS918+)

Old loader version:   Jun's Loader v1.02b

Old version DSM:      DSM 6.1.7-15284 update 3
New loader version: Jun's Loader v1.04b
New version DSM:    DSM 6.2.3-25426 update 3

Additional module extra.lzma, extra.2lzma: NO

 

Bare Metal

Motherboard:             GA-B250M-DS3H

Chipset:                      Intel B250

CPU:                            Intel Core i5-6500 (Socket 1151v1)

RAM:                           8GB DDR4-2400 DIMM

Integrated NIC:          Realtek RTL 8111G

Hard disk:                      4 x 4 TB Seagate Ironwolf raid5 and 2 x 3 TB Seagate Ironwolf raid1

Disk hibernation not functional.

Link to comment
Share on other sites

  • 3 months later...

RESULT - SUCCESSFUL

 

 

Loader version and type: 1.03b & DS3617xs

 

DSM version in use (including critical update): DSM 6.2.3-25426 Update 3

 

Using custom modules/ramdisk? If yes which one?: No

 

Bare Metal

 

Hardware details:

 

      Motherboard - ASROCK b460m Steel Legend

      CPU - Intel I3 10100f

      RAM - 2x4GB DDR4 RAM

      NIC - Intel 82574l (internal Nic wouldn't work, even with extra.lzma)

 

Edited by xPalito93
Link to comment
Share on other sites

Success - without any install issues.  Installed first time with reboot

 

Loader version and type (918+/3615xs/3617xs):   DS3617XS. Jun 1.03b

DSM version in use (including critical update):  DSM 6.2.3-24526 Update 3

Using custom modules/ramdisk? If yes which one?:  Standard install in Legacy

Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice):

 

Machinist X99-K9 (Same as Machinist X99Z V102)

E5-2699 V3 (HT disabled and restricted to 16 cores) 

16gb - 4x4gb DDR4 2400

Intel X540-T2 10Gbe network (on board Realtek also works)

PCIe 1x Nvidia 710 video

Edited by smoothmove
Link to comment
Share on other sites

  • 1 month later...

Result:                       SUCCESSFUL (migration DS3617xs to DS918+)

Old loader version:   Jun's Loader v1.04b

Old version DSM:      DSM 6.2.3-25426 update 3
New loader version: Jun's Loader v1.04b
New version DSM:    DSM 6.2.3-25426 update 3

Additional module: extra.lzma, extra.2lzma: yes

 

Bare Metal

Motherboard:             Supermicro X10SAE Intel® C226 LGA 1150 (Socket H3) ATX (vtd disable)

Chipset:                      Intel C226

CPU:                            Intel E3-1285L V4 with Iris Pro Graphics P6300 (transcode HW OK) 

RAM:                           8GB DDR3-1866 DIMM

Integrated NIC:          Dual Gigabit Ethernet LAN ports (1x Intel® i217LM & 1x Intel® i210AT)

Disk:                           11 x 3 TB MIXING SAS & SATA (RAID6) & 1 SSD read cache 256G

Pcie:                            2 x m1015 (flash LSI )

 

 

  

Edited by aeros34
Link to comment
Share on other sites

  • 1 month later...
On 2/3/2021 at 1:38 AM, Nett1 said:

Outcome of the update: SUCCESSFUL

- DSM version: 6.2.3-25426 update 3

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Installation type: BAREMETAL

- Hardware: ASRock B365M Pro4, LGA1151 microATX, 6x SATA,

   CPU: Intel Core i5 9400 BOX,

   RAM: Crucial 16 GB DDR4 PC4-25600

- Additional Comment: Everything detected without additional configuration or mod

hi, I am going to use the same mothetboard as yours (6 sata and 1 nvme m2). Should I write sataportmap 6 or 7? and can the 6.2.3 recognize the nvme m2 so that I can use it as cache? thanks

Link to comment
Share on other sites

  • 1 month later...
บน 12/27/2018 ที่ 9:44 PM, suschmania กล่าวว่า:

รุ่นและประเภทตัวโหลด (918+): 1.04b2 DS918+

รุ่น DSM ที่ใช้อยู่ (รวมถึงการอัปเดตที่สําคัญ): DSM 6.2.1-23824 อัปเดต 2

ใช้โมดูล/ramdisk แบบกําหนดเองหรือไม่ ถ้าใช่อันไหน?: ไม่

รายละเอียดฮาร์ดแวร์: เมนบอร์ด: Biostar J3060NH; นิค: เรียลเทค RTL8111H

 

การติดตั้งใหม่สําเร็จด้วย DSM_DS918+_23739.pat + อัพเดทภายในระบบ ยังไม่ได้ตรวจสอบการแปลงรหัสฮาร์ดแวร์

ฉันมีไบโอสตาร์ J3060NH โปรดแนะนําการติดตั้ง
DSM ขอบคุณ

Link to comment
Share on other sites

On 12/27/2018 at 9:44 PM, suschmania said:

Loader version and type (918+):  1.04b2 DS918+

DSM version in use (including critical update):  DSM 6.2.1-23824 Update 2

Using custom modules/ramdisk? If yes which one?:  no

Hardware details:  Motherboard:  Biostar J3060NH;  NIC:  Realtek RTL8111H

 

Successfull fresh installation with DSM_DS918+_23739.pat + update inside System. Didn´t check Hardware transcoding, yet.

I have Biostar J3060NH please advise DSM installation.
thank you

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...