Jump to content
XPEnology Community

User Reported Compatibility Thread for DSM 6.2


Recommended Posts

This topic is for users to report compatible hardware with loader in use. Please provide the following information:

 

Loader version and type (918+/3615xs/3617xs):

DSM version in use (including critical update):

Using custom modules/ramdisk? If yes which one?:

Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice):

 

NO DOT INITIATE DISCUSSIONS OR ASK QUESTIONS HERE. Such posts will be deleted without warning.

 

Edited by Polanskiman
Minor edits
Link to comment
Share on other sites

Loader version and type (918+):  1.03a2 DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 1

Using custom modules/ramdisk? If yes which one?:  None

Hardware details:  DELL PowerEdge T30, Intel Xeon E3-1225 v5, LAN Intel i219

 

Hardware Acceleration with Plex is working!

Link to comment
Share on other sites

Loader version and type (918+):  1.03a2 DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 1

Using custom modules/ramdisk? If yes which one?:  None

Hardware details: HP ProLiant ML310e Generation 8 (Gen8) v2 E3-1220 V3, Nic HP Ethernet 1Gb 2-port 332i Adapter,  Storage Controller HP Dynamic Smart Array B120i Controller

 

Hardware Acceleration with Plex is working!

Edited by Davidov
Link to comment
Share on other sites

Loader version and type (918+):  1.03a2 DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 1

Using custom modules/ramdisk? If yes which one?:  None

Hardware details:  MB: ASRock H110M-ITX, CPU: Pentium G4560, NIC: Intel I219-V

 

Hardware acceleration in VideoStation causing system reboot after 5 seconds, Plex reboots instantly after playing a video. Interestingly, hwaccel works perfectly for both if there is no display plugged into the motherboard.

Link to comment
Share on other sites

Loader version and type (918+):  1.03a2 DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 1

Using custom modules/ramdisk? If yes which one?:  None

Hardware details:  MB: Supermicro X10SLM+-F, E3-1220v3, onboard NIC (Intel I210-AT), onboard SATA

Link to comment
Share on other sites

Loader version and type (918+):  1.03a2 DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 1

Using custom modules/ramdisk? If yes which one?:  extra.lzma for DS918+ v0.2

Hardware details:  Motherboard:  ASRock H370M-ITX;  NIC:  Intel I219V (working) & Intel I211-AT (not working), G5500T

 

Direct stream original of 1080p and 4K movies (Plex CPU usage ~2%) with a device does HW accl.

Transcode: 1080p (smooth) and 4K movies (stutters) (Plex CPU usage ~90% for both cases)

 

NVMe not recognized

Link to comment
Share on other sites

  • 3 weeks later...

Loader version and type (918+):  1.03a2 DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 2

Using custom modules/ramdisk? If yes which one?:  None

Hardware details:

 

- ASRock H270M-ITX/ac (wifi module deleted)
- Intel Pentium G4560T
- 16GB DDR4 memory

 

Disks:
- 3x 128GB SSD
- 2x 8TB HDD

 

Sadly the NVME ssd is not recognized.

Both (Intel) NICs work.

Transcoding works.

 

Everything was installed without any issue or "modding".

Link to comment
Share on other sites

Loader version and type (918+): 1.03a2 DS918+

DSM version in use (including critical update): DSM 6.2-23739

Using custom modules/ramdisk? If yes which one?: no

Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice):

 

Asus Maximus VIII Gene (latest BIOS 3801)

Intel I7-6700

32GB DDR4@2133

Onboard NIC: Intel I219-V

Disks:

2x2TB WD RED

2x1TB Seagate

2x256SSD SK Hinix

 

Sadly, NVME was not recognized.

Everything is working great.

Transcoding is working without any issues.

Transcode 4k to 1080p works flawless

Transcode 1080p to 1080p flawless

1080p direct stream flawless

4k direct stream flawless.

Link to comment
Share on other sites

  • 2 weeks later...

Loader version and type (918+):  1.03b DS3615xs
DSM version in use (including critical update):  DSM 6.2-23739
Using custom modules/ramdisk? If yes which one?:  None
Hardware details:  MB: AM1B-ITX, AMD Athlon 5350 , onboard NIC, onboard SATA

 

So far, it works correctly.

Link to comment
Share on other sites

Loader version and type (918+):  1.03a2 DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 2

Using custom modules/ramdisk? If yes which one?:  None

Hardware details:  Motherboard:  ASRock J344-ITX;  NIC:  Realtek 8111GR

 

SN/Mac valid

PhotoStation work perfect

VideoStation/Plex/EMBY  all only can do software transcode (without VAAPI), seens like some issue with igpu driver.

 

hope jun could update the loader soon.

 

Link to comment
Share on other sites

  • 2 weeks later...

Hi, first time user here:

 

Loader version and type (918+):  1.03a2 DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 2

Baremetal install

Hardware details:  Motherboard:  ASRock J5005-ITX;  NIC:  Realtek 8111H

 valid sn, boards mac

Everything apears to work well. Sytem boots fast and stransferspeeds are around 110MB/s.

have not tested hw transcoding but i assume it wont work

  • Like 1
Link to comment
Share on other sites

Loader version and type (918+):  1.03a2 , DS918+

DSM version in use (including critical update):  DSM 6.2-23739 Update 2

Using custom modules/ramdisk? If yes which one?:  None

Hardware details:  Motherboard:  Gigabyte GA-H270N-Wifi, CPU: Intel G4560

Link to comment
Share on other sites

  • 2 weeks later...

Loader version and type: 1.03b  / 3617XS

DSM version in use (including critical update):  None (kernel crash when booting from loader so I cannot install DSM)

Using custom modules/ramdisk? If yes which one?:  None

Hardware details: Proxmox on Hp Gen8.

 

Problem: 1.03b loader fails to boot (kernel crash) when OVMF (UEFI) bios is selected. It works only when SeaBIOS is selected (which is Proxmox's default but it lacks features).

 

Detailed info & logs in the following post:

 

 

Link to comment
Share on other sites

  • 3 weeks later...

Loader version and type: 1.03b  / 3615XS

DSM version in use (including critical update):  try use 6.2 but boot failed to stop updating shortly ,xxxxx   find.syunology.com xxxx   and not find the dsm device ip in Synology Assistant

Using custom modules/ramdisk? If yes which one?:  None

Hardware details: Intel ATOM D2700 CPU with intel d2700mud mainboard

 

Edited by mysy
Link to comment
Share on other sites

Loader version and type (918+/3615xs/3617xs):DS918+

DSM version in use (including critical update):DSM 6.2-23739 Update 2

Using custom modules/ramdisk? yes If yes which one?:extra918plus_v0.4

Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice):Asrock j3455-itx  nic r8168 realtek

Works great with update 2.

Link to comment
Share on other sites

Loader version and type: 1.03b 3617xs

DSM version in use (including critical update):DSM 6.2-23739 Update 2

Using custom modules/ramdisk? If yes which one?: - none

Hardware details :  Stock HP Proliant ML110 Gen 9 with Dell X520-T2 10G network card (Dell Part # 0JM42W)

 

Couple of notes: 

  -   Made sure to change to Legacy Boot (not UEFI)

  -   SATA - AHCI mode

  -   Hard Drives plugged in starting sequentially from SATA-0 port....(not just randomly plugged in...)

  -   Boot from USB Drive.

Edited by regisphilbin
added loader version...
Link to comment
Share on other sites

  • 2 weeks later...

Loader version and type (DS3617xs):  1.03b

DSM version in use (including critical update):  DSM 6.2-23739 

Using custom modules/ramdisk? If yes which one?:  None

Hardware details:  

ASRock H110M-ITX  >> Intel G4400 >>  NIC:  Intel I219V 1000 mb/s  >> LSI 9260-8i with WD Red 5 x 4TB Raid5

Edited by afaroz61
Link to comment
Share on other sites

  

Loader version and type (918+):  1.04b  DS918+

DSM version in use (including critical update):  DSM 6.2.1-23824

Using custom modules/ramdisk?   None

Hardware details:  Motherboard: Asrock j3455-ITX and PCi expess X1 Intel nic card

 

Edited by John
removed image
Link to comment
Share on other sites

Platform: ASRock J4105-ITX

Loader: Jun's v1.04b DS918

DSM: DSM 6.2.1-23824 Update 1
LAN: Realtek RTL8111H Gigabit

SATA3: 2x Intel via chipset, 2x ASMedia ASM1061 (hot plugging supported on all ports)

Comments: Uses 16Gb RAM without any problem (although the manual states it only supports 8Gb). First tried a clean install on a seperate disk, could just do it from the web (no pat). After that, I updated my existsing 6.2 installation without any problems.

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

Loader version and type (918+):  1.04b  DS918+

DSM version in use (including critical update):  DSM 6.2.1-23824

Using custom modules/ramdisk?   None

Hardware details:  Motherboard: Asrock H370M-ITX/ac, i3-8400

2nd NIC doesn't work... 

Comments: here in same thread, the user renedis, which has a previous motherboard with same NICs, works with 1.03a2 -weird-, don't know how to download 1.03a2, so I couldn't try.

EDIT: please remove the previous post, as this one is duplicated with more info.

Edited by ed_co
Link to comment
Share on other sites

Loader version and type (918+):  1.04b  DS918+

DSM version in use (including critical update):  DSM 6.2.1-23824

Using custom modules/ramdisk?   mlx4_core mlx4_en mlx_compat

Hardware details:  Motherboard: MSI B150M-D3 G4400

Device Description    Mellanox MT26448 ConnectX EN 10GigE, PCIe 2.0 5GT/s

Vital Product Data (VPD)    
Identifier    ConnectX-2 SFP+
Part Number    MNPA19-XTR

 

i found the error

 

[   20.006524] mlx4_core: Mellanox ConnectX core driver v4.1-1.0.2 (27 Jun 2017)
[   20.006531] mlx4_core: Initializing
[   20.007792] mlx4_core: probe of 0000:01:00.0 failed with error -5

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...