Jump to content
XPEnology Community

User Reported Compatibility Thread for DSM 6.2


Recommended Posts

Loader version and type (918+/3615xs/3617xs): Jun's Loader  v1.03b  DS3615xs

DSM version in use (including critical update): 6.2.3 Update 3

Using custom modules/ramdisk? If yes which one?: NO

Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice): HP ProLiant N54L, 8GB RAM, HP NC112T PCIe Gigabit NIC (Intel 82574L chipset)

 

 

Edited by gingerbeardman
Link to comment
Share on other sites

  • 3 weeks later...
В 04.09.2019 в 13:03, onick сказал:

Success with upgrade from DSM  DSM 6.2.2-24922 Update 2

 

Loader version and type (ds3615xs):  1.03b (!!!)  DSM_3615xs

DSM version in use (including critical update):  DSM 6.2.2-24922 Update 3

Using custom modules/ramdisk?   ePCI x1  NIC ASMedia 106x  (2xSATA)

Hardware details:  Motherboard: GIGABYTE GA-945GCM-S2L

 

Hi!
I have the same motherboard. I have problems installing Xpenology.
Please send a photo of the BIOS settings.

Link to comment
Share on other sites

Loader version and type (918+):  1.04 DS918+

DSM version in use (including critical update):  DSM 6.2.3.25426 (Update3)

Using custom modules/ramdisk? If yes which one?:  Yes: extra.lzma, extra.2lzma: YES (also replace the zImage and rd.gz from the installed DSM for 6.2.3-extra918plus_v0.13.3, for 6.2.2 extra918plus_loader_1.04b_DSM 6.2.2.v0.8_std_mod)

Hardware details:  Motherboard:  ASRock Z490-ITX;  NIC:  Realtek 8111GR

Edited by MISHA-DOM
Link to comment
Share on other sites

  • 2 weeks later...

Loader version and type (918+):  1.03b DS1615xs

DSM version in use (including critical update):  DSM 6.2.3-25426 Update 3

Using custom modules/ramdisk? If yes which one?:  NO

Hardware details:  Motherboard:  Huananzhi x79 v 2.47;  NIC:  Internal, CPU: Xeon E5 1650v1

Link to comment
Share on other sites

Jun's loader v1.02b DS3615xs with MBR partition

DSM 6.1.7-15284 Update 3

No custom modules/ramdisk

 

Hardware details:

 

AMD Athlon II X2 245e

MSI 790fx-GD70

Dual Onboard Realtek 8111DL  + Intel PCI gigabit nic

LSI® SAS 9211-8i PCI Express - IT Mode

 

Adaptive Load Balancing, bonding all 3 nics working great.

Emby working great, have not tried videocard hardware acceleration yet.

Edited by rubberducky_93
Link to comment
Share on other sites

  • 2 months later...
On 8/26/2021 at 5:24 AM, smoothmove said:

Success - without any install issues.  Installed first time with reboot

 

Loader version and type (918+/3615xs/3617xs):   DS3617XS. Jun 1.03b

DSM version in use (including critical update):  DSM 6.2.3-24526 Update 3

Using custom modules/ramdisk? If yes which one?:  Standard install in Legacy

Hardware details (try being specific without giving long and useless technical details - model version, motherboard and NIC used should suffice):

 

Machinist X99-K9 (Same as Machinist X99Z V102)

E5-2699 V3 (HT disabled and restricted to 16 cores) 

16gb - 4x4gb DDR4 2400

Intel X540-T2 10Gbe network (on board Realtek also works)

PCIe 1x Nvidia 710 video

Hi, i have exactly same MACHINIST X99  using onboard NIC with loader Jun 1.03b. unable to connect to network. Is there any modification in BIOS  or Bootloader? appreciate  your support.

Link to comment
Share on other sites

5 hours ago, ilyas said:

Hi, i have exactly same MACHINIST X99  using onboard NIC with loader Jun 1.03b. unable to connect to network. Is there any modification in BIOS  or Bootloader? appreciate  your support.

unlikely to be a driver problem if its a realtek 8111/8168 chip, cant remember to have seen cases where the hardware was "to new" as seen with intel nic's or realtek 8125

it its 1.03b loader then is more likely to be a uefi/csm problem where you not only need to have csm active you also need to boot from the usb legacy device instead if usb uefi device, csm i a option and if usb uefi dvice is used the it will boot in uefi

its documented here

https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/

 

so try 918+ (the board/chipset seem to be haswell aka 4th gen intel) or try loader 1.02b (as seen in the link 1.02b and dsm 6.1 dont habe that uefi/csm-legacy problem)

 

  • Thanks 1
Link to comment
Share on other sites

  • 3 weeks later...
  • 2 months later...

- Result: SUCCESSFUL (DS918+)
- Loader version and model (clean install): Jun's Loader v1.04b
- Version DSM: tried DSM 6.2.3-25426
- Additional module extra.lzma, extra.2lzma: NO
- Hardware: GIGABYTE B560M DS3H V2, BIOS F7, RAM 16GB,  Intel Core i5-11400
- RAM: 2 x 8Gb DDR4, 3200 МГц, AMD Radeon R9 Gamer

- Ethernet: internal Realtek RTL8118, and also external PCI-E ORIENT XWT-R81PEL, chip RTL8111E 

 

BIOS settings:

- Use CSM - UEFI 

- Disable all unnecessary things, virtualization, and etc.

 

 

IMPORTANT!

- If you reinstall DSM several times (for example, you are experimenting), be SURE to delete all partitions from all disks, otherwise you will get error 13 during installation.

IMG_20220728_151522.jpg

IMG_20220728_151510.jpg

Link to comment
Share on other sites

  • 4 weeks later...

Hello,

 

I run successfully XPENOLOGY DS918+ with this configuration since March 2022 :

- Loader version and model (clean install): Jun's Loader v1.04b EFI
- Version DSM: tried DSM 6.2.3-25426
- Additional module extra.lzma, extra.2lzma: NO
- Hardware: ASUS ROG MAXIMUS VII Ranger, RAM 16GB,  Intel Core i7-4790k
- RAM: 2 x 8Gb DDR3, AMD Radeon HD7950

- Ethernet: internal Intel GBE

- 4x4To Ironwolf

No particular modification in UEFI.

A bit powerful for a NAS, I wanted to test it as my Syno DS414 was full (4x2To 7200RPM Hitachi running since 03/2014) and did't want to replace my disks.

It's my old Video/Photo workstation.

 

Actually I'm trying to put my disks in a new AMD setup but have some problems to start (no network at least).

 

Sorry for my approximate English.

Link to comment
Share on other sites

My second test installation seems to work almost correctly :

 

XPENOLOGY DS918+ with this configuration as of August 2022 :

- Loader version and model (clean install): Jun's Loader v1.04b EFI
- Version DSM: tried DSM 6.2.3-25426
- Additional module extra.lzma, extra.2lzma: extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.13.9 (thx IG-88) for rtl8111H
- Hardware: ASRock B550M Pro 4 (Bios v2.20), RAM 16GB,  AMD Ryzen-5 5600G
- RAM: 2 x 8Gb DDR4 (Corsair Vengeance LPX 3200/16)

- Ethernet: internal Realtek RTL8111H GBe

- 1x 60Go Hitachi (2.5" 2006) for test purpose

Next stage:  4x4To Ironwolf from earlier config with some data. I Need some more tests between my 2 configuration to ensure properly migration.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...