Jump to content
XPEnology Community

Drivers requests for DSM 6.2

Polanskiman
 Share

Recommended Posts

fa2k Junior Member

fa2k

Posted
Posted
On 11/2/2018 at 10:42 AM, bearcat said:

Since there is a big userbase with HP Microserver G7,

it would be nice to have support for the builtin NIC, HP NC107i based on BCM5723.

It has been supported up until now, when 6.2.1 broke it.

 

Hi bearcat,

i have built the driver for DS918+.

It seems the driver need firmware, so i have put it in the zip too.

you can load the driver with insmod /path/to/tg3.ko

 

Let me know if it work

Broadcom-TG3.zip

  • Thanks 1
Link to comment
Share on other sites
fa2k Junior Member

fa2k

Posted
Posted
On 10/30/2018 at 9:49 AM, nymph said:

I have old machine and tried to load ata_piix.ko in dsm6.2 (DS3615ws) . but it didn't work (made coredump)..

I need ata-piix.ko in dsm6.2 . Thanks.

the driver was build for 6.2 on DS3617xs. So can you try it with that?

Link to comment
Share on other sites
Jamzor Regular Member

Jamzor

Posted
Posted

Hi,

Im a noob at PCI-E SAS/SATA expander cards.
When looking at the good ones from LSI in this list: http://xpenology.me/compatible/ there is very few options.

I can only buy those LSI cards in that list or will other work as well? I need something that has some internal and some external ports, not just 8internal or so like in the list.

Is it possible to request this for a specific card I might buy here? For DS918+ DSM 6.2.1 (latest)

Thanks and sorry if post is wrong..

Link to comment
Share on other sites
nymph Newbie

nymph

Posted
Posted
On 11/12/2018 at 12:17 AM, fa2k said:

the driver was build for 6.2 on DS3617xs. So can you try it with that?

 

You're right. I inserted  ata_piix.ko in rc.modules of extra.lzma, and it detected my disks. 

 

I can try to migrate ds3615ws to ds3617ws.

 

Thanks.

Link to comment
Share on other sites
zhsrain Newbie

zhsrain

Posted
Posted (edited)

I checked the network card information in windows.


Device Description    Mellanox MT26448 ConnectX EN 10GigE, PCIe 2.0 5GT/s
Bus Type    PCI Express 2.0 x8
Bus / Device / Function    2 / 0 / 0
Device ID    15B3-6750
Subsystem ID    15B3-0015
Device Class    0200 (Ethernet Controller)
Revision    B0
Fast Back-to-Back Transactions    Not Supported

Vital Product Data (VPD)    
Identifier    ConnectX-2 SFP+
Part Number    MNPA19-XTR
 

I checked the network card information in DSM

lspci -k

I found the network card in the list.

0000:01:00.0 Class 0200: Device 15b3:6750 (rev b0)
    Subsystem: Device 15b3:0015


But the network card does not work

 

i found the error

 

mlx4_core: probe of 0000:01:00.0 failed with error -5

Edited by zhsrain
Link to comment
Share on other sites
  • 2 weeks later...
hli Newbie

hli

Posted
Posted

I think we need a new driver if it's posible for the Mellanox ConnectX-2 MNPA19-XTR 10gbe for the new Jun loader DS918+ 1.04b

this is not included i try to use the old one from 1.03a2 loader extras.lzma but this dont work

mlx4_core: probe of 0000:05:00.0 failed with error -5

 

Link to comment
Share on other sites
  • 2 weeks later...
ziid Newbie

ziid

Posted
Posted (edited)
On 9/23/2018 at 10:25 PM, LeoHou said:

+2

virtio_net driver for QEMU/KVM will be also useful for me.

I am using the unraid, which using RedHat KVM, I have to change the setting in xml, the network from  "<model type='virtio'/>" to the " <model type='e100'/>".

For the reason I don't understand, this setting will be reset every time I reboot the VM, so It will be best if it has driver for KVM.

+3, w/o the virtio_net driver, we can only go for Intel E1000 which is slow

Edited by ziid
  • Like 1
Link to comment
Share on other sites
kazuni Regular Member

kazuni

Posted
Posted
On 8/18/2018 at 11:28 PM, painkiller895 said:

Loader DS3617 1.03b on a Dell R410 on board Network not working guess drivers are missing, I added an Intel dual lan card and I was able to update the system.   

 to the latest 6.2-23739 update 2.

   


painkiller895@DSMv2410-127:/$ dmesg | grep "eth"
[    4.295929] usbcore: registered new interface driver ethub
[   18.736287] igb 0000:03:00.0: added PHC on eth0
[   18.736294] igb 0000:03:00.0: eth0: (PCIe:2.5GT/s:Width x4)
[   18.736297] igb 0000:03:00.0 eth0: MAC: 00:1b:21:a7:42:9c
[   18.736640] igb 0000:03:00.0: eth0: PBA No: G18758-001
[   18.900626] igb 0000:03:00.1: added PHC on eth1
[   18.900635] igb 0000:03:00.1: eth1: (PCIe:2.5GT/s:Width x4)
[   18.900638] igb 0000:03:00.1 eth1: MAC: 00:1b:21:a7:42:9d
[   18.900941] igb 0000:03:00.1: eth1: PBA No: G18758-001
[   20.237881] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   20.304867] bnx2 0000:01:00.0 eth2: Broadcom NetXtreme II BCM5716 1000Base-T  (C0) PCI Express found at mem d8000000, IRQ 36, node addr 78:2b:cb:20:98:a7
[   20.305773] bnx2 0000:01:00.1 eth3: Broadcom NetXtreme II BCM5716 1000Base-T  (C0) PCI Express found at mem da000000, IRQ 48, node addr 78:2b:cb:20:98:a8
[   23.591877] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.221221] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   25.778307] igb 0000:03:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Du plex, Flow Control: None
[   25.778465] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
painkiller895@DSMv2410-127:/$

  


painkiller895@DSMv2410-127:/$  lspci -k | grep 'Kernel driver'
        Kernel driver in use: pcieport
        Kernel driver in use: pcieport
        Kernel driver in use: pcieport
        Kernel driver in use: uhci_hcd
        Kernel driver in use: uhci_hcd
        Kernel driver in use: ehci-pci
        Kernel driver in use: uhci_hcd
        Kernel driver in use: uhci_hcd
        Kernel driver in use: uhci_hcd
        Kernel driver in use: uhci_hcd
        Kernel driver in use: ehci-pci
        Kernel driver in use: lpc_ich
        Kernel driver in use: ahci
        Kernel driver in use: bnx2
        Kernel driver in use: bnx2
        Kernel driver in use: igb
        Kernel driver in use: igb
painkiller895@DSMv2410-127:/$

 

Looks like the bnx2 is missing a driver or file...

 

I also can not update my Dell R710 which uses the same.

Were you able to enable the debug serial bridge to ? if so, can I pm you so that i can set up and see dmesg... thanks!

Link to comment
Share on other sites
HaWk Newbie

HaWk

Posted
Posted (edited)

Dear friends, please help win Microserver Gen10 support for AMD Opteron X3421 APU.

Tried:

 1.02b with 6.1.7 and 6.2 starts but VMM do not load virtual machines. Tried to add Extra.Izma 4.8 to 6.1.7 - didnt help.

 1.04b with 6.2.1 and 6.2.1 Updated 2 starts but VMM do not load virtual machines.

 

Fixed errors about "TUN" in log when staring VM by: 

mkdir /dev/net
mknod /dev/net/tun c 10 200
chmod 600 /dev/net/tun
ls -l /dev/net
cat /dev/net/tun
insmod /lib/modules/tun.ko

but this doesn't help.

  

2018-12-28T14:17:31+03:00 FS synoscgi_SYNO.Virtualization.Guest_1_list_SYNO.Virtualization.Guest_1_usb_list[19845]: ccc/sender.cpp:454 Failed to list host linearized from dashboard
2018-12-28T14:17:33+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: ccc/guest.cpp:2403 Want Resource / Pre-allocated resource for [ca6426c7-0276-4ce0-a28c-67553329d0e9], mem: 1426063360 / 0, vcpu: 1 / 0, cpu pin: 0 /
 0, cpu weight: 256 / 0
2018-12-28T14:17:33+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: MemSize: ccc/reservation.cpp:900 Start to op(3), ca6426c7-0276-4ce0-a28c-67553329d0e9: [{}] -> [{"vram_size":1426063360}]
2018-12-28T14:17:33+03:00 FS synoccc_guestd[32381]: ccc/reservation.cpp:137 locked /dev/virtualization/libvirt/qemu/syno.qemu_back_mem.ca6426c7-0276-4ce0-a28c-67553329d0e9 size: 1426063360
2018-12-28T14:17:33+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: CpuCore: ccc/reservation.cpp:900 Start to op(3), ca6426c7-0276-4ce0-a28c-67553329d0e9: [{}] -> [{"cpu_pin_num":0,"cpu_weight":256,"vcpu_num":1}]
2018-12-28T14:17:33+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: CpuCore: ccc/reservation.cpp:1181 CPU cores utilization, total: 2 * 4, sum of vcpu used: 1, sum of cpu pin reserved: 0, want vcpu: 1, want cpu reser
ved: 0
2018-12-28T14:17:34+03:00 FS kernel: [ 1537.502443] got iSCSI disk[0]
2018-12-28T14:17:35+03:00 FS kernel: [ 1538.203588] got iSCSI disk[0]
2018-12-28T14:17:35+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: ccc/guest.cpp:1208 connection open failed
2018-12-28T14:17:35+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: ccc/guest.cpp:2623 Failed to start guest [ca6426c7-0276-4ce0-a28c-67553329d0e9]
2018-12-28T14:17:35+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: ccc/guest.cpp:199 Disks stopped in 0.201000 sec
2018-12-28T14:17:35+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: ccc/vnic.cpp:1351 Destroy vnic  (tap tap0211322d268e) by DetachStateDel
2018-12-28T03:17:35+03:00 FS synonetd: net_if_is_bonding_slave.c:46 Cannot get flags of network interface: No such device
2018-12-28T14:17:35+03:00 FS synoccc_guestd[32381]: ccc/reservation.cpp:105 un-locked /dev/virtualization/libvirt/qemu/syno.qemu_back_mem.ca6426c7-0276-4ce0-a28c-67553329d0e9
2018-12-28T14:17:35+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: CpuCore: ccc/reservation.cpp:1181 CPU cores utilization, total: 2 * 4, sum of vcpu used: 0, sum of cpu pin reserved: 0, want vcpu: -1, want cpu rese
rved: 0
2018-12-28T14:17:35+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: Guest/guest.cpp:4955 Failed creating guest [ca6426c7-0276-4ce0-a28c-67553329d0e9] reason [-6]
2018-12-28T14:17:35+03:00 FS synoscgi_SYNO.Virtualization.Guest.Action_1_pwr_ctl[20021]: guest_action.cpp:207 Bad response [{"error":{"code":908},"httpd_restart":false,"success":false}]/ request [{"api":"SYNO.CCC.Guest","guest_id":"ca642
6c7-0276-4ce0-a28c-67553329d0e9","method":"poweron","version":1}]
2018-12-28T14:19:35+03:00 FS synoscgi_SYNO.Virtualization.Guest_1_get[22553]: servicecfg_validate.c:123 [/usr/syno/etc/synoservice.d/pkgctl-Virtualization.cfg] is not a json format file.
2018-12-28T14:19:35+03:00 FS synoscgi_SYNO.Virtualization.Guest_1_get[22553]: servicecfg_root_object_get.c:137 Failed to validate service file [/usr/syno/etc/synoservice.d/pkgctl-Virtualization.cfg]
2018-12-28T14:19:35+03:00 FS synoscgi_SYNO.Virtualization.Guest_1_get[22553]: servicecfg_validate.c:123 [/usr/syno/etc/synoservice.d/pkgctl-Virtualization.cfg] is not a json format file.
2018-12-28T14:19:35+03:00 FS synoscgi_SYNO.Virtualization.Guest_1_get[22553]: servicecfg_root_object_get.c:137 Failed to validate service file [/usr/syno/etc/synoservice.d/pkgctl-Virtualization.cfg]
2018-12-28T14:19:35+03:00 FS synoscgi_SYNO.Virtualization.Guest_1_get[22553]: pkgtool.cpp:2959 Failed to get status of pkgctl-Virtualization [0x4000 servicecfg_validate.c:124]
2018-12-28T14:19:35+03:00 FS synoscgi_SYNO.Virtualization.Guest_1_get[22553]: ccc/service.cpp:1035 etcd state changed to preparing
2018-12-28T14:20:00+03:00 FS synoscgi_SYNO.Virtualization.Host_1_list[22741]: ccc/service.cpp:1014 etcd recoverd from preparing: Fri Dec 28 14:19:44 2018 - 16 seconds

 

Edited by Polanskiman
Added code tags.
Link to comment
Share on other sites
Jay Y Newbie

Jay Y

Posted
Posted (edited)
On 10/11/2018 at 11:10 AM, fa2k said:

i have build some kernel modules for broadwell 6.2. I have checked all things related to virtio, AMD, Intel Net, Broadcom Net and many Media Drivers. Maybe you will find some useful modules.

Also i have build modules for TT-Budget S2-4200, SkyStar2 and SkystarHD.

 

When you get a error message regarding "missing symbols" then you had to load a dependent module before.

Broadwell_6.2_Kernel-Modules.zip

 

Any chance you can also build the MegaRAID drivers (megaraid and megaraid_sas)? I'm trying to use a Dell H330 (Chipset SAS3008)/ LSI 9341-8i which according to LSI should be using megaraid drivers. 

 

Edit: Just to clarify, I am trying use this with loader V1.03b with a DS3617 image and DSM version 6.2

Edited by Jay Y
Link to comment
Share on other sites
fa2k Junior Member

fa2k

Posted
Posted

Hi Jay,

 

sure..

And thank you for the needed informations like version, needed driver name and usedimage.. 

 

Do you want to use the H330 with raid support or just pass through the disks to synology?

For passthrough i havent use any additions drivers. They just work out of the box.

 

I have compiled the requested drivers..

 

the order to load is:

 

megaraid_mm.ko
megaraid_mbox.ko
megaraid_sas.ko

ds3617_6.2_megaraid.zip

Link to comment
Share on other sites
Jay Y Newbie

Jay Y

Posted
Posted
2 minutes ago, fa2k said:

Hi Jay,

 

sure..

And thank you for the needed informations like version, needed driver name and usedimage.. 

 

Do you want to use the H330 with raid support or just pass through the disks to synology?

For passthrough i havent use any additions drivers. They just work out of the box.

 

I have compiled the requested drivers..

 

the order to load is:

 

megaraid_mm.ko
megaraid_mbox.ko
megaraid_sas.ko

ds3617_6.2_megaraid.zip

My first big ray of hope in days! I've tried everything I could come up with to make this card work but to no effect. I kid you not, I'm keeping count and as of this moment I've restarted my machine 92 times each time with some new combination of loader, drivers, image etc. 

 

I am trying to use the card in passthrough mode (HBA). I also tested RAID mode with a RAID volume created and without (with disks marked NON RAID). Unfortunately, none of those work for me. I have 5 disks attached to the onboard SATA ports and those are visible and usable but none of the disks attached to the H330 are visible. I'll try the drivers you just supplied but would love to hear what else needs to be done to have the disks be visible in passthrough mode since that has not worked out of the box for me. I've tested my hardware by running Ubuntu live and the card and all drives attached to it are visible in passthrough mode. 

 

Btw, I also tried compiling drivers against bromolow earlier and the default drivers in that kernel don't have the PCI ID in the source for this card. I got the latest sources from Broadcom but that source either won't compile independently or the Synology image shows the driver crashing when it is being loaded. 

 

I will test the drivers you've sent now and report back shortly. Btw, I tried the drivers in your original package and the tg3 driver there fails on my machine (original driver provided with the image works fine)

 

Link to comment
Share on other sites
fa2k Junior Member

fa2k

Posted
Posted
4 minutes ago, Jay Y said:

I am trying to use the card in passthrough mode (HBA)

 

have you cross flashed the controller like here described:  Crossflashing of LSI 9341-8i ?

Seems to be not optimal regarding SMART, but i havent read the whole article.

BTW

i have flashed all my cards to IT-Mode for using it directly in DSM.

But now im using ESXi and want to have raid support. :-)

 

Good luck with the drivers!

If they dont work, let me know the error message from dmesg..

Link to comment
Share on other sites
Jay Y Newbie

Jay Y

Posted
Posted
42 minutes ago, fa2k said:

 

have you cross flashed the controller like here described:  Crossflashing of LSI 9341-8i ?

 

If they dont work, let me know the error message from dmesg..

 

I saw that Crossflashing post a while back but there is no jumper on my card so I don't think I can perform those steps. All I can do is to set it in HBA mode. Please correct me if I am wrong. 

 

I tried the megaraid drivers you gave me and both megaraid_sas and megaraid_mbox fail to load.

I dmesg, I get this:

[    2.327902] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)

[    2.330024] megaraid_mbox: Unknown symbol pv_irq_ops (err 0)

[    2.336544] Fusion MPT base driver 3.04.20

[    2.336545] Copyright (c) 1999-2008 LSI Corporation

[    2.340828] Fusion MPT SPI Host driver 3.04.20

[    2.343046] Fusion MPT SAS Host driver 3.04.20

[    2.345235] Fusion MPT misc device (ioctl) driver 3.04.20

[    2.345279] mptctl: Registered with Fusion MPT base driver

[    2.345280] mptctl: /dev/mptctl @ (major,minor=10,220)

[    2.347430] megaraid_sas: Unknown symbol pv_irq_ops (err 0)

[    2.351217] mpt2sas version 20.00.00.00 loaded

[    2.355445] mpt3sas version 13.00.00.00 loaded

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...