Jump to content
XPEnology Community

Driver extension jun 1.03a2/DSM6.2.x for DS918+


Recommended Posts

  • 5 months later...

Plz add lan driver for DSM6.2.x for DS918+  1.04b

last time worked successfully - ds3615_6.1.7

 

Intel82574L PCI-E X1 Server Gigabit Ethernet Network Adapter NIC Diskless Desktop Server NIC 10/100/1000Mbps EXPI9301CT 82574

 

Edited by vt18
Link to comment
Share on other sites

14 hours ago, vt18 said:

last time worked successfully - ds3615_6.1.7

why not using this?

 

14 hours ago, vt18 said:

ntel82574L PCI-E X1 Server Gigabit Ethernet Network Adapter NIC Diskless Desktop Server NIC 10/100/1000Mbps EXPI9301CT 82574

intel e1000e driver (like on the Intel Gigabit CT Desktop Adapter) ist part of the original image that one will work ootb

also intel igb driver is present in the original image

even r8168 driver is presen in d918 image so extra cheap realtek card will work too ootb

 

i'm not going to do anything new as long as the new intel 9100T cpu isn't available, thats the only part missing for my new nas hardware and when i'm doing drivers for this one (gigabyte b360m-hd3 board with realtek 8118 nic) i will have a look at other drivers too (preferably drives i have test hardware around, after this for hardware that has do be implemented without testing)

Edited by IG-88
Link to comment
Share on other sites

On 9/19/2019 at 3:34 AM, IG-88 said:

why not using this?

 

Active Backup for Business requires upgrade to version 6.2 

this is the only problem
everything else suits me all !!!

 

 I understood you. I'm going to change the motherboard on gigabyte GA-IMB4100TN

Edited by Polanskiman
Removed answer from quote.
Link to comment
Share on other sites

  • 3 months later...

I need the drivers for my MSi z170a board. I also have a MNPA19-XTR 10GB MELLANOX CONNECTX-2 PCIe X8 10Gbe SFP+ connected, with for me, it what I really need.

 

I am using the DS3617xs, with 1.04b, and 6.1., and hopping to add the DSM_DS3617xs_24922 that I saw.

 

Thank you in advance, let me know anything.

Link to comment
Share on other sites

  • 2 weeks later...
On 7/8/2018 at 11:32 AM, IG-88 said:

That command will list the used kernel modules for the hardware. Modules for network and storage will be listed. Compare that with the list of modules that comes with the extra.lzma ramdisks provided below.

 

extra.lzma for DS918+ v0.2 (still online for testing against new 0.4)

http://s000.tinyupload.com/?file_id=40794274174411841232

extra.lzma for DS918+ v0.3

http://s000.tinyupload.com/?file_id=09865768016965468337

extra.lzma for DS918+ v0.4

http://s000.tinyupload.com/?file_id=85078902011391385959

extra.lzma for DS918+ v0.5_test

http://s000.tinyupload.com/?file_id=74512746059829955779

 

 

  NETWORK DRIVERS LIST - Click here to see (Hide contents)

NETWORK

 

Aquantia 
 atlantic:
Aquantia 1/2.5/5/10 Gigabit PCI Express Family AQC-100 / AQC-107 / AQC-108 (external source: Aquantia-AQtion-2.0.10.0)

 

Mellanox
mlx_compat, mlx4_core, mlx4_en, mlx5_core: Mellanox T25400/MT27500/MT27520/MT25408/MT25418/MT25448/MT25408/MT26418/MT26428/MT26438/MT26448/MT25408/MT26468/MT26478/MT27600/MT27700/MT27710

(MT27800/MT28800/MT28908/MT416842)

ConnectX MT254xx
ConnectX-2 MT264xx
ConnectX-3 MT275xx
ConnectX-IB MT276xx
ConnectX-4 MT277xx
(ConnectX-5 MT278xx, MT288xx)
(ConnectX-6 MT289xx)

 

 

I was struggling with drivers for my 2 10Glan NIC to get it to work. and I found this link.  I changed my extra.lzma file for the 0.4 that I just download it, (0.5 could get it).

 

Now internal motherboard NIC is not recognized, and the other 2 10Glan NIC still does not work.

 

The 2 that I left on the Network compatibility list, are the two that I have. I am just trying to get one going, and take the other one out.

 

If there a link where I can learn how to open the extra.lzma, and add drivers?

Why, if I added this new extra.lzma into my USB, non of my cards work?

 

Note: I am using MSI Z170A GAMING M5

Link to comment
Share on other sites

  • 2 weeks later...

After 2 weeks, when I was ready to start copying files and after I have done all the test, now my system is not recognized when I try http://find.synology.com/

 

I have also tried Synology Assistance software and cannot be found.

 

When I go to my router settings, I can see that my router is assigning 2 IP address to both of my NIC's, my built-in on the motherboard (MSi z170a), and the 10Gbe SFP+( MNPA19-XTR 10GB MELLANOX CONNECTX-2 PCIe X8). Even when I try the IP:5000 I cannot find the server.

 

The only think that changed, was that for some reason, my motherboard BIOS battery died, and I put a new one. I do not know if there a setting that was there before, that was enable or disable, and it is changed now.

 

Know I cannot access, what I have already copy, or nothing.

Link to comment
Share on other sites

  • 1 month later...

If your nic's are being assigned ip address, that means they are detected, however that you cant reach web interface means probably your DSM installation is broken, so you need to reinstall

 

On 1/28/2020 at 6:51 AM, Popeye-DR said:

After 2 weeks, when I was ready to start copying files and after I have done all the test, now my system is not recognized when I try http://find.synology.com/

 

I have also tried Synology Assistance software and cannot be found.

 

When I go to my router settings, I can see that my router is assigning 2 IP address to both of my NIC's, my built-in on the motherboard (MSi z170a), and the 10Gbe SFP+( MNPA19-XTR 10GB MELLANOX CONNECTX-2 PCIe X8). Even when I try the IP:5000 I cannot find the server.

 

The only think that changed, was that for some reason, my motherboard BIOS battery died, and I put a new one. I do not know if there a setting that was there before, that was enable or disable, and it is changed now.

 

Know I cannot access, what I have already copy, or nothing.

 

Link to comment
Share on other sites

  • 3 weeks later...

Can someone please help me to make a 10Gbit Synology adaptor, work with my XPEnology?

 

It's a custom Asus mobo, which has only 2x1Gbit cards

ASUS SABERTOOTH_X99

image.png.6680749e5271c5e3971e13f3db598238.png61irMvz4XcL._AC_._SS160_.jpg

So I bought this card: E10G18-T1

 

but it's not detected (DSM 6.2.2-24922 Update 5)

 

I tried disabling the realtek (2nd) nic on the bios (keeping only 1, intel) but still nothing

 

The 10Gb card lights are blinking though..

 

I've seen something about a .pat file for drivers? How do I install it?

I think I have the loader 1.03

How do I create a new usb with 1.04?

Will that include the driver?

 

I really forgot about this XPE thing since it was intalled, about 1y ago..

 

Any help would be appreciated.

 

Edited by ssuper2k
update info
Link to comment
Share on other sites

1.04b is just for 918+, read this to get more information

https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/

 

if you use 24922 then you will need different drivers (as of changes in the kernel of synology in dsm s6.2.2 aka 24922)

https://xpenology.com/forum/topic/21663-driver-extension-jun-103b104b-for-dsm622-for-3615xs-3617xs-918/

 

just copy the extra.lzma (depending on you loader type) to the 2nd partition of your usb replacing the files there and you should be good after the next reboot

this card might be a aquantia based card (older 10G Base-T from synology was a tehuti)

 

Link to comment
Share on other sites

Got it working!!!  (took me some looong hours...)

 

Had to include these 4 files (from 'extra918plus_v0.8_std.zip') in partition 2 (usb boot)

image.png.1f54849465def5802dcd640ada4b10d7.png

*Also disabled 2nd integrated nic (a realtek)

 

image.png.f2f89556a0840004a6c3e08b8b9ebf44.png

 

image.png.3dc3c025c50540d786cf912d90ff485b.png

I hope I can get faster speeds, when I have more than 3 drives in both NAS'es

 

At the end, I confirmed, there was NO need to change mac/pid on the grub.cfg in partition 1

Edited by ssuper2k
Link to comment
Share on other sites

1 hour ago, ssuper2k said:

At the end, I confirmed, there was NO need to change mac/pid on the grub.cfg in partition 1

thats only true if you don't install the *.pat file and use it to test if you can find it in network

if vid/pid in grub do not match the real one's of you usb device you will get error 13 when installing

the mac is only needed when using WOL or for some reason you need to use a pair of valid serial and mac

i guess you meant to say you dont need serial and mac for installing (both can be changed later in the grub.cfg if needed)

Link to comment
Share on other sites

22 hours ago, ssuper2k said:

Can someone please help me to make a 10Gbit Synology adaptor, work with my XPEnology?

 

I



Do you need driver for that specific card, or a card thar surely work? 

 

 

Edited by Aigor
Link to comment
Share on other sites

1 hour ago, Aigor said:

Do you need driver for that specific card, or a card thar surely work? 

 

the card is original synology but its not supported on all hardware (and it needs a minimal dsm version 6.2-23739-2 or 6.1-15284-2), a atlantic.ko driver is only present in 3615/17 not in 918+ image to it should have been working ootb as native drivers with 3615/17, but doesn't matter as the driver is also in the extra drivers

Link to comment
Share on other sites

  • 5 months later...
  • 1 year later...
On 9/30/2020 at 7:45 AM, Tomas A said:

Sorry to ask but can anyone upload v0.4 to other source? all links doesnt work for me... tinyupload.com doesn't work at all. it's either blocked by some DNS providers or just down.

i need that extra file :(

 

On 10/6/2020 at 5:36 AM, mike861033 said:

All links here are dead too :( 

 

Confirmed links are dead for all, and appears to have been dead for a long, LONG while.

 

These may no longer be needed by these users, but if they are, or for anyone else who may need them, there are new mirror links below.  Please consult the OP for any additional info needed!

 

extra.lzma for DS918+ v0.2 (still online for testing against new 0.4)
Original: http://www.filedropper.com/extra918plusv02
Filename: extra918plus_v0.2.zip
SHA256: 793B844F2649B81D9B3096CD458E169DB254989FC8B2519341FA464D517D00C2
Mirrors: Dailyuploads, usersdrive, Zippyshare

 

extra.lzma for DS918+ v0.3
Original: http://www.filedropper.com/extra918plusv03
Filename: extra918plus_v0.3.zip
SHA256: 452ACB232607E15CFC5D88EFBF03800EA034383FC0584A2CDB2180CEA49C0660
Mirrors: Dailyuploads, usersdrive, Zippyshare

 

extra.lzma for DS918+ v0.4
Original: http://www.filedropper.com/extra918plusv04
Filename: extra918plus_v0.4.zip
SHA256: D7C5150BA0EF1653B3F3B688793B10E7503589E75CBA0E1D6D054388C14606DE
Mirrors: Dailyuploads, usersdrive, Zippyshare

 

extra.lzma for DS918+ v0.5_test
Original: http://www.filedropper.com/extra918plusv05test
Filename: extra918plus_v0.5_test.zip
SHA256: 765095FC170CB1A23371E6BD7A593F9FD8CA3E0B2D86445C25DA72420FCBBF04
Mirrors: Dailyuploads, usersdrive, Zippyshare

Link to comment
Share on other sites

  • 3 weeks later...
2 hours ago, hendry said:

is it possible to mount host volume on vm guest to be able for indexing media such as for music or photo station? i'm using qnap virtualization station to create vm for xpenology..  i heard virtio fs driver can do it.. is it true?

virtio drivers are there for long but where not loaded automatically, i changed that (and added some things)  in the latest extra for 3617 and plan to do the same for 3615 and 918+

but why so complicated, you could  mount a smb share or a nfs share in the vm

Edited by IG-88
Link to comment
Share on other sites

3 hours ago, hendry said:

is it possible to mount host volume on vm guest to be able for indexing media such as for music or photo station? i'm using qnap virtualization station to create vm for xpenology..  i heard virtio fs driver can do it.. is it true?

 

That is what NFS is for ...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...