Jump to content
XPEnology Community

DS916+ auf Asus N3050T


HansMeier

Recommended Posts

Ich versuche die DS916-Variante auf o.g. Board zu installieren. Die 3615 und 3617-Varianten laufen problemlos, hier verzweifle ich noch.

Nach Installation ist das System nicht erreichbar. Aufruf der Adresse im Browser führt zum abschalten des Boards. Über den Umweg Upgrade von 3617 auf 916 konnte ich immerhin per SSH auf die Box und habe folgendes in messages gefunden:

2018-06-27T21:28:43+02:00 Syno2 kernel: [   35.147960] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com> 
2018-06-27T21:28:43+02:00 Syno2 kernel: [   35.147960]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
2018-06-27T21:28:43+02:00 Syno2 kernel: [   35.147960]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
2018-06-27T21:28:44+02:00 Syno2 synostorage: synostorage_int_disk.c:346 Disk [sdb] info cache generated
2018-06-27T21:28:45+02:00 Syno2 kernel: [   36.908452] mtrr: type mismatch for d0000000,10000000 old: write-through new: write-combining
2018-06-27T21:28:46+02:00 Syno2 kernel: [   38.799059] et131x: module is from the staging directory, the quality is unknown, you have been warned.
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105547] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105558] IP: [<ffffffff8135a1d1>] syno_ahci_disk_led_enable+0x31/0x180
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105562] PGD 63234067 PUD 6189a067 PMD 0 
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105564] Oops: 0000 [#1] SMP 
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105678] CPU: 0 PID: 7431 Comm: insmod Tainted: P         C O 3.10.102 #15284
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105680] Hardware name: ASUS All Series/N3050T, BIOS 0407 02/06/2017
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105682] task: ffff880064ab8040 ti: ffff880063204000 task.ti: ffff880063204000
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105688] RIP: 0010:[<ffffffff8135a1d1>]  [<ffffffff8135a1d1>] syno_ahci_disk_led_enable+0x31/0x180
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105692] RSP: 0018:ffff880063207cd8  EFLAGS: 00010202
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105693] RAX: ffff88006726f000 RBX: 0000000000000001 RCX: ffff880063d334b0
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105695] RDX: 000000000000000a RSI: 0000000000000000 RDI: ffff88006726f380
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105697] RBP: ffff880063207ee8 R08: 00000000000024c0 R09: 00000000000024c0
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105698] R10: 0000000000002640 R11: 0000000000002640 R12: ffff88006726f000
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105700] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffffa0cab6c0
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105702] FS:  00007f303cbb1700(0000) GS:ffff88006a200000(0000) knlGS:0000000000000000
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105704] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105705] CR2: 0000000000000011 CR3: 0000000064863000 CR4: 00000000001007f0
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105707] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105708] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105709] Stack:
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105715]  ffffffffa0ca4270 ffff880063207ee8 0000000000000000 ffffffffa0cab710
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105718]  0000000000000001 ffffffffa0cab6c0 ffffffffa0ca7705 ffffffff8182d040
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105721]  0000000000000001 ffffffffa0cab6c0 ffffffff81160f7f 0000011500000002
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105722] Call Trace:
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105738]  [<ffffffffa0ca4270>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios]
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105747]  [<ffffffffa0ca7705>] ? synobios_model_init+0x1a5/0x390 [braswell_synobios]
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105754]  [<ffffffff81160f7f>] ? proc_alloc_inum+0x2f/0xb0
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105757]  [<ffffffff81161099>] ? proc_register+0x99/0x140
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105762]  [<ffffffff81161229>] ? proc_mkdir_data+0x49/0x70
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105769]  [<ffffffffa0ca4270>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios]
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105776]  [<ffffffffa0ca42de>] ? synobios_init+0x6e/0x490 [braswell_synobios]
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105782]  [<ffffffffa0ca4270>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios]
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105789]  [<ffffffff810003aa>] ? do_one_initcall+0xea/0x140
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105796]  [<ffffffff81089a13>] ? load_module+0x1b93/0x2110
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105802]  [<ffffffff810869a0>] ? store_uevent+0x40/0x40
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105809]  [<ffffffff810f8799>] ? vfs_read+0xf9/0x160
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105813]  [<ffffffff8108a0c0>] ? SYSC_finit_module+0x70/0x80
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105821]  [<ffffffff814a6972>] ? system_call_fastpath+0x16/0x1b
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105857] Code: 56 41 55 44 8d 2e 41 54 55 53 e8 2b e0 fb ff 48 85 c0 4c 8d 20 0f 84 54 01 00 00 48 8b 98 08 05 00 00 48 85 db 0f 84 3d 01 00 00 <48> 8b 7b 10 48 8b ab 48 32 00 00 e8 0f bd 14 00 31 d2 31 ff 48 
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105861] RIP  [<ffffffff8135a1d1>] syno_ahci_disk_led_enable+0x31/0x180
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105863]  RSP <ffff880063207cd8>
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105864] CR2: 0000000000000011
2018-06-27T21:28:47+02:00 Syno2 kernel: [   39.105868] ---[ end trace 4975151b94ea8624 ]---
2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth2], max LAN id is [1]
2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth5], max LAN id is [1]
2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth3], max LAN id is [1]
2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth4], max LAN id is [1]
2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth6], max LAN id is [1]
2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth7], max LAN id is [1]
2018-06-27T21:28:47+02:00 Syno2 interface-catcher: eth0 (dhcp) is added
2018-06-27T21:28:48+02:00 Syno2 interface-catcher: lo (inet 127.0.0.1 netmask 255.0.0.0 ) is added
2018-06-27T21:28:49+02:00 Syno2 dhcp-client: started on eth0
2018-06-27T21:28:50+02:00 Syno2 [   42.685490] init: dhcp-client (eth0) main process (7834) killed by TERM signal
2018-06-27T21:28:50+02:00 Syno2 dhcp-client: stopped on eth0
2018-06-27T21:28:51+02:00 Syno2 dhcp-client: started on eth0
2018-06-27T21:28:52+02:00 Syno2 spacetool.shared: raid_allow_rmw_check.c:48 fopen failed: /usr/syno/etc/.rmw.md2
2018-06-27T21:28:52+02:00 Syno2 spacetool.shared: spacetool.c:3151 [Info] Activate all VG
2018-06-27T21:28:52+02:00 Syno2 spacetool.shared: spacetool.c:3205 space: [/dev/md2]
2018-06-27T21:28:53+02:00 Syno2 spacetool.shared: spacetool.c:3231 space: [/dev/md2], ndisk: [1]
2018-06-27T21:28:53+02:00 Syno2 dhcp-client: stopped on eth0
2018-06-27T21:28:53+02:00 Syno2 [   45.726041] init: dhcp-client (eth0) main process (8153) killed by TERM signal
2018-06-27T21:28:54+02:00 Syno2 dhcp-client: started on eth0
2018-06-27T21:28:54+02:00 Syno2 dhcp-client6: started on eth0 with action=client
2018-06-27T21:28:55+02:00 Syno2 spacetool.shared: hotspare_repair_config_set.c:37 synostoraged is offline, skip sending SIGHUP
2018-06-27T21:28:55+02:00 Syno2 synovspace: virtual_space_conf_check.c:78 [INFO] "PASS" checking configuration of virtual space [FCACHE], app: [1]
2018-06-27T21:28:55+02:00 Syno2 synovspace: virtual_space_conf_check.c:74 [INFO] No implementation, skip checking configuration of virtual space [HA]
2018-06-27T21:28:55+02:00 Syno2 synovspace: virtual_space_conf_check.c:74 [INFO] No implementation, skip checking configuration of virtual space [SNAPSHOT_ORG]
2018-06-27T21:28:55+02:00 Syno2 synovspace: vspace_wrapper_load_all.c:76 [INFO] No virtual layer above space: [/volume1] / [/dev/md2]
2018-06-27T21:28:57+02:00 Syno2 dhcp-client: eth0 get new IP 192.168.1.145/24
2018-06-27T21:28:57+02:00 Syno2 kernel: [   49.132985] BTRFS: has skinny extents
2018-06-27T21:29:00+02:00 Syno2 dhclient: eth0 emit network ready event
2018-06-27T21:29:02+02:00 Syno2 configupdate: libconfigupdate.c:156 Original info before upgrade, dsmversion: 15284, smallfixnumber: 0, event: volume_ready, type: migrate
2018-06-27T21:29:02+02:00 Syno2 synocheckhotspare: synocheckhotspare.c:150 [INFO] No hotspare config, skip hotspare config check. [0x2000 virtual_space_layer_get.c:97]
2018-06-27T21:29:05+02:00 Syno2 configupdate: libconfigupdate.c:156 Original info before upgrade, dsmversion: 15284, smallfixnumber: 0, event: share_ready, type: migrate
2018-06-27T21:29:05+02:00 Syno2 synobackupd: (10289) [err] command_server.cpp:341 add watch to [/usr/local/share/synobackup] failed
2018-06-27T21:29:05+02:00 Syno2 synousbdisk: RCClean succeeded
2018-06-27T21:29:06+02:00 Syno2 syno_hdd_util: Model:[HTS725032A7E630], Firmware:[GHBOA470], S/N:[TF0400Y11RJS9J] in [/dev/sdb] is not ssd
2018-06-27T21:29:07+02:00 Syno2 hotplugd: hotplugd.c:1345 ##### ACTION:add
2018-06-27T21:29:07+02:00 Syno2 hotplugd: DEVNAME:sdb
2018-06-27T21:29:07+02:00 Syno2 hotplugd: DEVGUID:TF0400Y11RJS9J0
2018-06-27T21:29:07+02:00 Syno2 hotplugd: DEVPATH:sdb
2018-06-27T21:29:07+02:00 Syno2 hotplugd: SUBSYSTEM:block
2018-06-27T21:29:07+02:00 Syno2 hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:13.0/ata2/host1/target1:0:0/1:0:0:0
2018-06-27T21:29:07+02:00 Syno2 hotplugd: scemd_connector/scemd_connector.c:134 Fail to sendto() for scemd connector client.
2018-06-27T21:29:07+02:00 Syno2 hotplugd: hotplugd.c:1444 ==== SATA disk [sdb] hotswap [add] ====
2018-06-27T21:29:08+02:00 Syno2 hotplugd: disk/disk_config_single.c:234 apply /usr/syno/bin/DiskApmSet.sh 255  /dev/sdb 1>/dev/null 2>&1
2018-06-27T21:29:09+02:00 Syno2 hotplugd: disk/disk_config_single.c:234 apply /usr/syno/bin/syno_disk_ctl --ncq-on  /dev/sdb 1>/dev/null 2>&1
2018-06-27T21:29:09+02:00 Syno2 kernel: [   57.896185] Get empty minor:104
2018-06-27T21:29:09+02:00 Syno2 hotplugd: hotplugd.c:1465 ==== SATA disk [sdb] Model: [HTS725032A7E630         ] ====
2018-06-27T21:29:09+02:00 Syno2 hotplugd: hotplugd.c:1466 ==== SATA disk [sdb] Serial number: [TF0400Y11RJS9J] ====
2018-06-27T21:29:09+02:00 Syno2 hotplugd: hotplugd.c:1467 ==== SATA disk [sdb] Firmware version: [GHBOA470] ====
2018-06-27T21:29:12+02:00 Syno2 root: mkcert: Verifying certificate in [/usr/syno/etc/certificate/system/default].
2018-06-27T21:29:14+02:00 Syno2 synoiscsiep: iscsi_start_all.cpp:101 Successfully started iSCSI service.
2018-06-27T21:29:16+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:29:21+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:29:24+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:29:39+02:00 Syno2 pingpong.cgi: SYSTEM:	Last message 'scemd_connector/scem' repeated 7 times, suppressed by syslog-ng on Syno2
2018-06-27T21:29:39+02:00 Syno2 serv-bootup-timeout.sh: all service finish boot up.
2018-06-27T21:29:40+02:00 Syno2 synopkghelper: resource_api.cpp:288 Update feasibility-config for SynoFinder
2018-06-27T21:29:41+02:00 Syno2 syno-pkg-upgrade.sh: upgrade package: /.SynoUpgradePackages/FileStation-x86_64-1.1.4-0123.spk
2018-06-27T21:29:41+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:29:44+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:29:47+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:02+02:00 Syno2 pingpong.cgi: SYSTEM:	Last message 'scemd_connector/scem' repeated 6 times, suppressed by syslog-ng on Syno2
2018-06-27T21:30:02+02:00 Syno2 synopkg: resource_api.cpp:231 Release csp-rule for FileStation when 0x0002 (done)
2018-06-27T21:30:02+02:00 Syno2 synopkg: resource_api.cpp:231 Release web-config for FileStation when 0x0002 (done)
2018-06-27T21:30:02+02:00 Syno2 synopkg: resource_api.cpp:231 Release webapi-desc for FileStation when 0x0002 (done)
2018-06-27T21:30:02+02:00 Syno2 synopkg: resource_api.cpp:231 Release webapi-desc for FileStation when 0x0002 (done)
2018-06-27T21:30:03+02:00 Syno2 synopkg: SYSTEM:	Last message 'resource_api.cpp:231' repeated 1 times, suppressed by syslog-ng on Syno2
2018-06-27T21:30:03+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release indexdb for FileStation when 0x0002 (done)
2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release web-config for FileStation when 0x0002 (done)
2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release userdata-collector for FileStation when 0x0002 (done)
2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release service-cfg for FileStation when 0x0002 (done)
2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release sdk-plugin for FileStation when 0x0002 (done)
2018-06-27T21:30:06+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:07+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire sdk-plugin for FileStation when 0x0002 (done)
2018-06-27T21:30:08+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:12+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:14+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:24+02:00 Syno2 pingpong.cgi: SYSTEM:	Last message 'scemd_connector/scem' repeated 5 times, suppressed by syslog-ng on Syno2
2018-06-27T21:30:24+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire service-cfg for FileStation when 0x0002 (done)
2018-06-27T21:30:24+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire userdata-collector for FileStation when 0x0002 (done)
2018-06-27T21:30:24+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire web-config for FileStation when 0x0002 (done)
2018-06-27T21:30:25+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire indexdb for FileStation when 0x0002 (done)
2018-06-27T21:30:25+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire csp-rule for FileStation when 0x0002 (done)
2018-06-27T21:30:27+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:28+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for FileStation when 0x0002 (done)
2018-06-27T21:30:28+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for FileStation when 0x0002 (done)
2018-06-27T21:30:28+02:00 Syno2 synopkgctl: SYSTEM:	Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on Syno2
2018-06-27T21:30:28+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire web-config for FileStation when 0x0002 (done)
2018-06-27T21:30:28+02:00 Syno2 thumbd: dispatcher.cpp:21 (11966, 0) start dispatcher thread
2018-06-27T21:30:28+02:00 Syno2 thumbd: worker_pool.cpp:78 (11966, 0) start worker pool
2018-06-27T21:30:28+02:00 Syno2 thumbd: pool_monitor.cpp:91 (11966, 0) start pool monitor
2018-06-27T21:30:29+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:33+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:35+02:00 Syno2 pingpong.cgi: SYSTEM:	Last message 'scemd_connector/scem' repeated 1 times, suppressed by syslog-ng on Syno2
2018-06-27T21:30:35+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire indexdb for FileStation when 0x0008 (done)
2018-06-27T21:30:35+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire csp-rule for FileStation when 0x0008 (done)
2018-06-27T21:30:36+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:38+02:00 Syno2 syno-pkg-upgrade.sh: upgrade package: /.SynoUpgradePackages/SynologyUniversalSearch-x86_64-1.0.11-0167.spk
2018-06-27T21:30:39+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:42+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status.
2018-06-27T21:30:42+02:00 Syno2 pingpong.cgi: SYSTEM:	Last message 'scemd_connector/scem' repeated 1 times, suppressed by syslog-ng on Syno2
2018-06-27T21:30:42+02:00 Syno2 synopkg: pkginstall.cpp:902 Can't downgrade SynoFinder
2018-06-27T21:30:42+02:00 Syno2 synopkg: pkginstall.cpp:311 Failed to install package: /.SynoUpgradePackages/SynologyUniversalSearch-x86_64-1.0.11-0167.spk, [267]
2018-06-27T21:30:44+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for SynoFinder when 0x0000 (done)
2018-06-27T21:30:44+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for SynoFinder when 0x0000 (done)
2018-06-27T21:30:45+02:00 Syno2 synopkgctl: SYSTEM:	Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on Syno2
2018-06-27T21:30:45+02:00 Syno2 root: == DSM 6.1 15284-0 finished boot up ==
2018-06-27T21:30:46+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:134 Fail to sendto() for scemd connector client.
2018-06-27T21:30:46+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:209 Fail to SYNOScemdConnectorClient() for scemd conncetor client
2018-06-27T21:30:47+02:00 Syno2 index.cgi: external/external_microp_id_check.c:56 Fail to open synobios
2018-06-27T21:30:47+02:00 Syno2 root: platform error
2018-06-27T21:30:47+02:00 Syno2 index.cgi: feasibility_check.cpp:76 FeasibilityCheck: [Err] Failed to CheckConfEnum.
2018-06-27T21:30:48+02:00 Syno2 manutild: manutild.c:2961 not factory enviroment, finish manutild
2018-06-27T21:30:49+02:00 Syno2 updater: utils.cpp:325 Run SUS available updates
2018-06-27T21:31:04+02:00 Syno2 index.cgi: feasibility_check.cpp:76 FeasibilityCheck: [Err] Failed to CheckConfEnum.
2018-06-27T21:31:04+02:00 Syno2 index.cgi: system_sys_init.c:90 synopoweroff: System is going to poweroff
2018-06-27T21:32:04+02:00 Syno2 [  233.653136] init: synonetd main process (5557) killed by TERM signal
2018-06-27T21:32:04+02:00 Syno2 [  233.657639] init: synostoraged main process (9984) terminated with status 15
2018-06-27T21:32:09+02:00 Syno2 kernel: [  239.077003] [sched_delayed] sched: RT throttling activated
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13437] /devices/virtual/block/loop1 timeout; kill it
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1703 '/devices/virtual/block/loop1' killed
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13449] /devices/virtual/block/loop0 timeout; kill it
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1701 '/devices/virtual/block/loop0' killed
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13450] /devices/virtual/block/loop7 timeout; kill it
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1715 '/devices/virtual/block/loop7' killed
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13457] /devices/virtual/block/loop2 timeout; kill it
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1705 '/devices/virtual/block/loop2' killed
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13458] /devices/virtual/block/loop3 timeout; kill it
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1707 '/devices/virtual/block/loop3' killed
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13460] /devices/virtual/block/loop4 timeout; kill it
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13437] terminated by signal 9 (Killed)
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13449] terminated by signal 9 (Killed)
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13450] terminated by signal 9 (Killed)
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13457] terminated by signal 9 (Killed)
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13458] terminated by signal 9 (Killed)
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13460] terminated by signal 9 (Killed)
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13463] terminated by signal 9 (Killed)
2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13465] terminated by signal 9 (Killed)
2018-06-27T21:33:10+02:00 Syno2 syno_poweroff_task: System is acting poweroff.
2018-06-27T21:33:10+02:00 Syno2 [  299.271733] init: hotplugd main process (10346) killed by TERM signal
2018-06-27T21:33:10+02:00 Syno2 [  299.355306] init: smbd main process (11534) killed by TERM signal
2018-06-27T21:33:10+02:00 Syno2 [  299.600171] init: synortc main process (13384) terminated with status 255

 

Die 916 würde ich wg. Hardware-Transcoding bevorzugen. Kann ich da noch was machen?

Link to comment
Share on other sites

2018-06-27T21:30:45+02:00 Syno2 root: == DSM 6.1 15284-0 finished boot up ==
2018-06-27T21:30:47+02:00 Syno2 index.cgi: external/external_microp_id_check.c:56 Fail to open synobios
2018-06-27T21:30:47+02:00 Syno2 root: platform error
2018-06-27T21:30:47+02:00 Syno2 index.cgi: feasibility_check.cpp:76 FeasibilityCheck: [Err] Failed to CheckConfEnum.
2018-06-27T21:31:04+02:00 Syno2 index.cgi: feasibility_check.cpp:76 FeasibilityCheck: [Err] Failed to CheckConfEnum.
2018-06-27T21:31:04+02:00 Syno2 index.cgi: system_sys_init.c:90 synopoweroff: System is going to poweroff

irgenwie kann er wohl nicht das bios finden, merkt das was an der hardware nicht original ist und fährt runter

wenn es sich das 916+ image nicht mit dem passenden 1.02b loader installieren lässt kannst du evtl. ja mal den neuen 1.03a2 loader und das 918+ image probieren

deine cpu ist braswell und im dsm 6.2 thread im developer bereich gibts feedback das es mit transcoding auf N3150 (auch Braswell) läuft

im zweifelsfall muss man sich an beiträge halten die bestätigen auf welcher hardware es funktioniert oder sich die gleich prozessorvariante holen die synology verbaut

die kernel sind zum teil dicht(er) an die ziel hardware compiliert und da wir den orginal syno kernel nutzen (müssen) bleibt nur der weg sich entsprechend zu verbiegen und die hardware passend zum zielsystem zu nutzen, ist auch zum teil bei netzwerk und storage treibern so, wenn sich für 6.1 kein treiber compilieren lässt muss man halt einen controller kaufen der unterstützt wird - allerdings kann man auch zu einer "normalen" nas distri wechseln die (fast) alle hardware unterstützt omv, feenas, ...

oder man rechnet noch mal nach ob sich nicht doch eine synology hardware lohnt, hängt auch von den anvisierten größenordungen ab, wenn man 8-12 platten will wirds unter umständen nichts mit dem hardwaretranscoding oder/und es wird sehr teuer (org. esata synology enclusure geht ordentlich ins geld)

Link to comment
Share on other sites

Okay, dann kann ich da wohl nicht viel machen. Die Hardware ist zum anfüttern und vorhanden - dann gibt es eben doch kein Transcoding, wäre halt ganz nett gewesen.

Den Loader 1.03a2 habe ich noch getestet, hatte damit aber auch keinen Erfolg. Egal, mit den anderen Variante läuft es ja - danke!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...