Jump to content
XPEnology Community

ASUS XG-C100C network cards?


Recommended Posts

I'm running an ASUS mobo with an AMD PHENOM II 4 core, 16GB RAM, 8 HDDs.  XPEnology runs pretty great!  Ended up with a DS-3615xs running 6.1.6-15266


Turned on SHR because the drives are all different sized repurposed HDDs.


All that is awesome, however, I still have a couple of issues.


1. dmesg shows this pretty early in the bootup.  DSM shows 4GB RAM, 12GB is "reserved"


WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 12799MB of RAM.


2. My 2nd nic is a xg-c100c.  The module shows up in lspci -vvv:


0000:06:00.0 Class 0200: Device 1d6a:d107 (rev 02)
        Subsystem: Device 1043:8741
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at fd840000 (64-bit, non-prefetchable)
        Region 2: Memory at fd850000 (64-bit, non-prefetchable)
        Region 4: Memory at fd400000 (64-bit, non-prefetchable)
        Expansion ROM at fd800000 [disabled]
        Capabilities: [40] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI-X: Enable+ Count=32 Masked-
                Vector table: BAR=2 offset=00000000
                PBA: BAR=2 offset=00000200
        Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [c0] Vital Product Data
                Product Name: AQtion
                Read-only fields:
                        [PN] Part number: AquantiaPartNumber
                        [EC] Engineering changes: AquantiaEngineeringChangeLevel
                        [FG] Unknown: 41 71 75 61 6e 74 69 61 46 61 62 72 69 63 47 65 6f 67 72 61 70 68 79
                        [LC] Unknown: 41 71 75 61 6e 74 69 61 4c 6f 63 61 74 69 6f 6e
                        [MN] Manufacture ID: 41 71 75 61 6e 74 69 61 4d 61 6e 75 66 61 63 74 75 72 69 6e 67 49 64
                        [PG] Unknown: 41 71 75 61 6e 74 69 61 50 63 69 47 65 6f 67 72 61 70 68 79
                        [SN] Serial number: AquantiaSerialNumber
                        [V0] Vendor specific: AquantiaVendorSpecificReadOnlyItem0
                        [V1] Vendor specific: AquantiaVendorSpecificReadOnlyItem1
                        [RV] Reserved: checksum good, 0 byte(s) reserved
                Read/write fields:
                        [YA] Asset tag: AquantiaAssetTagIdentifier
                        [V0] Vendor specific: AquantiaVendorSpecificWritableItem0
                        [V1] Vendor specific: AquantiaVendorSpecificWritableItem1
                        [Y0] System specific: AquantiaSystemSpecificWritableItem0
                        [Y1] System specific: AquantiaSystemSpecificWritableItem1
                        [RW] Read-write area: 9 byte(s) free
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [150 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Capabilities: [180 v1] #19
        Kernel driver in use: atlantic


but when I look in DSM > Networking > Network Interface > LAN 2 "Disconnected" and the Network Status is "--"  I have link lights and a "CAT7" cable between the computers.  The other end of the link is a CentOS 7.4 server.  If I ifconfig down the interface, the link lights go out.  When I up the interface the lights come on.  I could do this all day.


What am I doing wrong?  I edited the grub.conf with my mac addresses and changed the nic count to 2.





Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...