jun

Progress of 6.2 loader

Polanskiman

Let me get things straighten up here before this thread starts going sideways. This is the developper discussion room. Not a newbie forum to start asking for guides and whatnot. @jun hasn't even said anything about the loader he has uploaded to his repository. So I would advise self control. Also, to those in panic mode trying to make things work desperately please use your personal jugement and experience. If you want to have a positive contribution to this thread then please do so by posting about possible bugs or things that don't work (beyond the "no network" boring posts of course). I am talking about serious bugs or the such. All other requests will from now on be deleted or moved if appropriate. I have no time to babysit anymore. Use the forum subsections.

Message added by Polanskiman

Recommended Posts

11 minutes ago, nevusZ said:

my question is, is the loader 1.03a2 ready for production system? what about that kernel panic, does it matter?

 

============upgrade
Wait 2 seconds for synology manufactory device
Sat Jul  7 08:56:05 UTC 2018
/dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=3897164k,nr_inodes=974291,mode=755 0 0
proc /proc proc rw,relatime 0 0

linuxrc.syno executed successfully.
Post init
fgrep: /tmpRoot/etc/rc: No such file or directory
/tmpRoot/usr/bin/sed: can't read /tmpRoot/etc/rc: No such file or directory
fgrep: /tmpRoot/etc/rc.subr: No such file or directory
/tmpRoot/usr/bin/sed: can't read /tmpRoot/etc/rc.subr: No such file or directory
Installing /tmpRoot//usr/lib/modules/update/BusLogic.ko...
Installing /tmpRoot//usr/lib/modules/update/vmw_pvscsi.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_mm.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_mbox.ko...
Installing /tmpRoot//usr/lib/modules/update/scsi_transport_spi.ko...
Installing /tmpRoot//usr/lib/modules/update/mptbase.ko...
Installing /tmpRoot//usr/lib/modules/update/mptscsih.ko...
Installing /tmpRoot//usr/lib/modules/update/mptspi.ko...
Installing /tmpRoot//usr/lib/modules/update/mptctl.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_sas.ko...
Installing /tmpRoot//usr/lib/modules/update/mdio.ko...
Installing /tmpRoot//usr/lib/modules/update/mii.ko...
Installing /tmpRoot//usr/lib/modules/update/libphy.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1e.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1c.ko...
Installing /tmpRoot//usr/lib/modules/update/alx.ko...
Installing /tmpRoot//usr/lib/modules/update/uio.ko...
Installing /tmpRoot//usr/lib/modules/update/jme.ko...
Installing /tmpRoot//usr/lib/modules/update/skge.ko...
Installing /tmpRoot//usr/lib/modules/update/sky2.ko...
Installing /tmpRoot//usr/lib/modules/update/qla3xxx.ko...
Installing /tmpRoot//usr/lib/modules/update/qlcnic.ko...
Installing /tmpRoot//usr/lib/modules/update/qlge.ko...
Installing /tmpRoot//usr/lib/modules/update/netxen_nic.ko...
Installing /tmpRoot//usr/lib/modules/update/sfc.ko...
Installing /tmpRoot//usr/lib/modules/update/e1000.ko...
Installing /tmpRoot//usr/lib/modules/update/pcnet32.ko...
Installing /tmpRoot//usr/lib/modules/update/vmxnet3.ko...
Installing /tmpRoot//usr/lib/modules/update/bnx2.ko...
Installing /tmpRoot//usr/lib/modules/update/cnic.ko...
Installing /tmpRoot//usr/lib/modules/update/ixgbe.ko...
Installing /tmpRoot//usr/lib/modules/update/r8168.ko...
Installing /tmpRoot//usr/lib/modules/update/r8169.ko...
Installing /tmpRoot//usr/lib/modules/update/tg3.ko...
Installing /tmpRoot//usr/lib/modules/update/ax88179_178a.ko...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-09ax-6.0.17.fw...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-09-6.0.17.fw...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-06-6.0.15.fw...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3_tso5.bin...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3_tso.bin...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3.bin...

==================== start udevd ====================
===== trigger device plug event =====
[  223.780145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8
[  223.787981] IP: [<ffffffffa04e0a6c>] send_vblank_event+0x2c/0x60 [drm]
[  223.794515] PGD 0 
[  223.796549] Oops: 0000 [#1] PREEMPT SMP 
[  223.800525] Modules linked in: i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm fb fbdev intel_agp intel_gtt agpgart video backlight button synoacl_vfs(PO) hfsplus md4 hmac r8168(OE) ixgbe(E) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd mdio(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd ohci_hcd(E) usbcore usb_common kmrw(OE) [last unloaded: apollolake_synobios]
[  223.884561] CPU: 3 PID: 437 Comm: kworker/3:1 Tainted: P           OE   4.4.59+ #23739
[  223.892432] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3455-ITX, BIOS P1.30 04/18/2017
[  223.901944] Workqueue: events output_poll_execute [drm_kms_helper]
[  223.908114] task: ffff8802764dd1c0 ti: ffff880276f50000 task.ti: ffff880276f50000
[  223.915547] RIP: 0010:[<ffffffffa04e0a6c>]  [<ffffffffa04e0a6c>] send_vblank_event+0x2c/0x60 [drm]
[  223.924482] RSP: 0018:ffff880276f53b40  EFLAGS: 00010006
[  223.929765] RAX: 00000000000000f0 RBX: ffff880271d80000 RCX: ffff88026c239558
[  223.936854] RDX: 000000000000002e RSI: ffff88026c239540 RDI: ffff880271d80000
[  223.943944] RBP: ffff880276f53b40 R08: 0000000000000004 R09: 0000000000000002
[  223.951037] R10: ffff880271d80000 R11: 0000000000000003 R12: ffff88026c239540
[  223.958127] R13: ffff880276f53b50 R14: 0000000000000000 R15: ffff880271fd3000
[  223.965219] FS:  0000000000000000(0000) GS:ffff88027fd80000(0000) knlGS:0000000000000000
[  223.973256] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  223.978969] CR2: 00000000000000f8 CR3: 0000000001809000 CR4: 00000000003406f0
[  223.986057] Stack:
[  223.988067]  ffff880276f53b80 ffffffffa04e0aeb 00000000000000df 00000000000ad9fa
[  223.995517]  0000000000000000 ffff880271d801d8 ffff880037b14000 ffff880271d80000
[  224.002972]  ffff880276f53b90 ffffffffa04e0b25 ffff880276f53c48 ffffffffa05f1b8b
[  224.010426] Call Trace:
[  224.012874]  [<ffffffffa04e0aeb>] drm_send_vblank_event+0x4b/0x70 [drm]
[  224.019454]  [<ffffffffa04e0b25>] drm_crtc_send_vblank_event+0x15/0x20 [drm]
[  224.026489]  [<ffffffffa05f1b8b>] intel_atomic_commit_tail+0x32b/0x10a0 [i915]
[  224.033676]  [<ffffffffa05597ab>] ? drm_atomic_helper_swap_state+0x14b/0x2f0 [drm_kms_helper]
[  224.042171]  [<ffffffffa05f2cbe>] intel_atomic_commit+0x3be/0x4e0 [i915]
[  224.048842]  [<ffffffffa04f8a85>] ? drm_atomic_add_affected_connectors+0x25/0xe0 [drm]
[  224.056716]  [<ffffffffa04f84d2>] drm_atomic_commit+0x32/0x50 [drm]
[  224.062949]  [<ffffffffa055ea76>] restore_fbdev_mode+0x156/0x280 [drm_kms_helper]
[  224.070390]  [<ffffffffa05603ae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x80 [drm_kms_helper]
[  224.079634]  [<ffffffffa0560428>] drm_fb_helper_set_par+0x28/0x50 [drm_kms_helper]
[  224.087157]  [<ffffffffa056033d>] drm_fb_helper_hotplug_event+0x9d/0xe0 [drm_kms_helper]
[  224.095214]  [<ffffffffa060ec7f>] intel_fbdev_output_poll_changed+0x1f/0x30 [i915]
[  224.102737]  [<ffffffffa0551bb2>] drm_kms_helper_hotplug_event+0x22/0x30 [drm_kms_helper]
[  224.110867]  [<ffffffffa0551d9e>] output_poll_execute+0x19e/0x1e0 [drm_kms_helper]
[  224.118390]  [<ffffffff8105c7f2>] process_one_work+0x142/0x360
[  224.124185]  [<ffffffff8105ceba>] worker_thread+0x4a/0x450
[  224.129641]  [<ffffffff8156295a>] ? __schedule+0x28a/0x710
[  224.135096]  [<ffffffff8105ce70>] ? max_active_store+0x60/0x60
[  224.140898]  [<ffffffff8105ce70>] ? max_active_store+0x60/0x60
[  224.146699]  [<ffffffff81061c36>] kthread+0xc6/0xe0
[  224.151550]  [<ffffffff81061b70>] ? kthread_create_on_node+0x180/0x180
[  224.158036]  [<ffffffff81566e5f>] ret_from_fork+0x3f/0x70
[  224.163405]  [<ffffffff81061b70>] ? kthread_create_on_node+0x180/0x180
[  224.169890] Code: 87 d8 01 00 00 85 c0 74 53 55 89 56 68 48 8b 01 48 89 e5 89 46 60 48 8b 41 08 48 8d 4e 18 89 46 64 48 8b 46 38 48 05 f0 00 00 00 <48> 8b 50 08 48 89 48 08 48 89 56 20 48 89 46 18 48 89 0a 31 c9 
[  224.190302] RIP  [<ffffffffa04e0a6c>] send_vblank_event+0x2c/0x60 [drm]
[  224.196910]  RSP <ffff880276f53b40>
[  224.200381] CR2: 00000000000000f8
[  224.203682] ---[ end trace 85d0e380afd4fdfb ]---
[  224.208275] note: kworker/3:1[437] exited with preempt_count 1
[  224.214078] ------------[ cut here ]------------
[  224.218676] WARNING: CPU: 3 PID: 437 at kernel/softirq.c:150 __local_bh_enable_ip+0x65/0x90()
[  224.227142] Modules linked in: btrfs(+) i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm fb fbdev intel_agp intel_gtt agpgart video backlight button synoacl_vfs(PO) hfsplus md4 hmac r8168(OE) ixgbe(E) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd mdio(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd ohci_hcd(E) usbcore usb_common kmrw(OE) [last unloaded: apollolake_synobios]
[  224.311962] CPU: 3 PID: 437 Comm: kworker/3:1 Tainted: P      D    OE   4.4.59+ #23739
[  224.319831] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3455-ITX, BIOS P1.30 04/18/2017
[  224.329343]  0000000000000000 ffff880276f53848 ffffffff812b541d 0000000000000000
[  224.336803]  ffffffff8172073c ffff880276f53880 ffffffff81046ced 0000000000000201
[  224.344254]  ffff8802764dd1c0 0000000000000046 ffff8802764dd1c0 00000000000000f8
[  224.351707] Call Trace:
[  224.354151]  [<ffffffff812b541d>] dump_stack+0x4d/0x70
[  224.359269]  [<ffffffff81046ced>] warn_slowpath_common+0x7d/0xc0
[  224.365246]  [<ffffffff81046de6>] warn_slowpath_null+0x16/0x20
[  224.371040]  [<ffffffff8104a555>] __local_bh_enable_ip+0x65/0x90
[  224.377015]  [<ffffffff81566665>] _raw_spin_unlock_bh+0x15/0x20
[  224.382899]  [<ffffffff810c1e0b>] cgroup_exit+0x4b/0xa0
[  224.388095]  [<ffffffff8104963d>] do_exit+0x36d/0xab0
[  224.393120]  [<ffffffff810073b4>] oops_end+0x84/0xc0
[  224.398054]  [<ffffffff8103a2eb>] no_context+0xfb/0x2b0
[  224.403253]  [<ffffffff8103a510>] __bad_area_nosemaphore+0x70/0x1f0
[  224.409482]  [<ffffffff8156295a>] ? __schedule+0x28a/0x710
[  224.414937]  [<ffffffff8103a69e>] bad_area_nosemaphore+0xe/0x10
[  224.420819]  [<ffffffff8103a8e9>] __do_page_fault+0x79/0x370
[  224.426447]  [<ffffffff81565f2d>] ? schedule_hrtimeout_range_clock+0x9d/0x100
[  224.433540]  [<ffffffff8103ac1c>] do_page_fault+0xc/0x10
[  224.438822]  [<ffffffff815681b2>] page_fault+0x22/0x30
[  224.443938]  [<ffffffffa04e0a6c>] ? send_vblank_event+0x2c/0x60 [drm]
[  224.450350]  [<ffffffffa04e0aeb>] drm_send_vblank_event+0x4b/0x70 [drm]
[  224.456931]  [<ffffffffa04e0b25>] drm_crtc_send_vblank_event+0x15/0x20 [drm]
[  224.463961]  [<ffffffffa05f1b8b>] intel_atomic_commit_tail+0x32b/0x10a0 [i915]
[  224.471145]  [<ffffffffa05597ab>] ? drm_atomic_helper_swap_state+0x14b/0x2f0 [drm_kms_helper]
[  224.479644]  [<ffffffffa05f2cbe>] intel_atomic_commit+0x3be/0x4e0 [i915]
[  224.486313]  [<ffffffffa04f8a85>] ? drm_atomic_add_affected_connectors+0x25/0xe0 [drm]
[  224.494188]  [<ffffffffa04f84d2>] drm_atomic_commit+0x32/0x50 [drm]
[  224.500424]  [<ffffffffa055ea76>] restore_fbdev_mode+0x156/0x280 [drm_kms_helper]
[  224.507863]  [<ffffffffa05603ae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x80 [drm_kms_helper]
[  224.517110]  [<ffffffffa0560428>] drm_fb_helper_set_par+0x28/0x50 [drm_kms_helper]
[  224.524640]  [<ffffffffa056033d>] drm_fb_helper_hotplug_event+0x9d/0xe0 [drm_kms_helper]
[  224.532700]  [<ffffffffa060ec7f>] intel_fbdev_output_poll_changed+0x1f/0x30 [i915]
[  224.540229]  [<ffffffffa0551bb2>] drm_kms_helper_hotplug_event+0x22/0x30 [drm_kms_helper]
[  224.548360]  [<ffffffffa0551d9e>] output_poll_execute+0x19e/0x1e0 [drm_kms_helper]
[  224.555879]  [<ffffffff8105c7f2>] process_one_work+0x142/0x360
[  224.561679]  [<ffffffff8105ceba>] worker_thread+0x4a/0x450
[  224.567134]  [<ffffffff8156295a>] ? __schedule+0x28a/0x710
[  224.572586]  [<ffffffff8105ce70>] ? max_active_store+0x60/0x60
[  224.578387]  [<ffffffff8105ce70>] ? max_active_store+0x60/0x60
[  224.584183]  [<ffffffff81061c36>] kthread+0xc6/0xe0
[  224.589035]  [<ffffffff81061b70>] ? kthread_create_on_node+0x180/0x180
[  224.595521]  [<ffffffff81566e5f>] ret_from_fork+0x3f/0x70
[  224.600890]  [<ffffffff81061b70>] ? kthread_create_on_node+0x180/0x180
[  224.607377] ---[ end trace 85d0e380afd4fdfc ]---
[  224.612057] BUG: unable to handle kernel paging request at ffffffffffffffd8
[  224.619033] IP: [<ffffffff8106219b>] kthread_data+0xb/0x20
[  224.624509] PGD 180a067 PUD 180c067 PMD 0 
[  224.628667] Oops: 0000 [#2] PREEMPT SMP 
[  224.632637] Modules linked in: btrfs(+) i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm fb fbdev intel_agp intel_gtt agpgart video backlight button synoacl_vfs(PO) hfsplus md4 hmac r8168(OE) ixgbe(E) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd mdio(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd ohci_hcd(E) usbcore usb_common kmrw(OE) [last unloaded: apollolake_synobios]
[  224.717454] CPU: 3 PID: 437 Comm: kworker/3:1 Tainted: P      D W  OE   4.4.59+ #23739
[  224.725323] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3455-ITX, BIOS P1.30 04/18/2017
[  224.734841] task: ffff8802764dd1c0 ti: ffff880276f50000 task.ti: ffff880276f50000
[  224.742284] RIP: 0010:[<ffffffff8106219b>]  [<ffffffff8106219b>] kthread_data+0xb/0x20
[  224.750176] RSP: 0018:ffff880276f53860  EFLAGS: 00010002
[  224.755457] RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff819827c0
[  224.762547] RDX: 0000000000000003 RSI: 0000000000000003 RDI: ffff8802764dd1c0
[  224.769637] RBP: ffff880276f53860 R08: 0000000000000336 R09: 0000000000000011
[  224.776732] R10: 00000000000c6fd2 R11: ffffffff819e6140 R12: 0000000000013e80
[  224.783822] R13: ffff88027fd93e80 R14: ffff8802764dd6f8 R15: ffff8802764dd1c0
[  224.790914] FS:  0000000000000000(0000) GS:ffff88027fd80000(0000) knlGS:0000000000000000
[  224.798951] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  224.804666] CR2: 0000000000000028 CR3: 0000000001809000 CR4: 00000000003406f0
[  224.811754] Stack:
[  224.813765]  ffff880276f53878 ffffffff8105d33c ffff88027fd93e80 ffff880276f538c0
[  224.821216]  ffffffff81562c2e 0000000300000000 ffff8802764dd1c0 ffff880276f54000
[  224.828668]  ffff880276f53910 ffff880276d02e00 ffff880276f534b0 00000000000000f8
[  224.836122] Call Trace:
[  224.838563]  [<ffffffff8105d33c>] wq_worker_sleeping+0xc/0x90
[  224.844282]  [<ffffffff81562c2e>] __schedule+0x55e/0x710
[  224.849565]  [<ffffffff81562e17>] schedule+0x37/0x80
[  224.854502]  [<ffffffff810499a9>] do_exit+0x6d9/0xab0
[  224.859524]  [<ffffffff810073b4>] oops_end+0x84/0xc0
[  224.864461]  [<ffffffff8103a2eb>] no_context+0xfb/0x2b0
[  224.869654]  [<ffffffff8103a510>] __bad_area_nosemaphore+0x70/0x1f0
[  224.875883]  [<ffffffff8156295a>] ? __schedule+0x28a/0x710
[  224.881337]  [<ffffffff8103a69e>] bad_area_nosemaphore+0xe/0x10
[  224.887223]  [<ffffffff8103a8e9>] __do_page_fault+0x79/0x370
[  224.892847]  [<ffffffff81565f2d>] ? schedule_hrtimeout_range_clock+0x9d/0x100
[  224.899940]  [<ffffffff8103ac1c>] do_page_fault+0xc/0x10
[  224.905221]  [<ffffffff815681b2>] page_fault+0x22/0x30
[  224.910340]  [<ffffffffa04e0a6c>] ? send_vblank_event+0x2c/0x60 [drm]
[  224.916757]  [<ffffffffa04e0aeb>] drm_send_vblank_event+0x4b/0x70 [drm]
[  224.923337]  [<ffffffffa04e0b25>] drm_crtc_send_vblank_event+0x15/0x20 [drm]
[  224.930373]  [<ffffffffa05f1b8b>] intel_atomic_commit_tail+0x32b/0x10a0 [i915]
[  224.937562]  [<ffffffffa05597ab>] ? drm_atomic_helper_swap_state+0x14b/0x2f0 [drm_kms_helper]
[  224.946060]  [<ffffffffa05f2cbe>] intel_atomic_commit+0x3be/0x4e0 [i915]
[  224.952727]  [<ffffffffa04f8a85>] ? drm_atomic_add_affected_connectors+0x25/0xe0 [drm]
[  224.960602]  [<ffffffffa04f84d2>] drm_atomic_commit+0x32/0x50 [drm]
[  224.966840]  [<ffffffffa055ea76>] restore_fbdev_mode+0x156/0x280 [drm_kms_helper]
[  224.974283]  [<ffffffffa05603ae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x80 [drm_kms_helper]
[  224.983534]  [<ffffffffa0560428>] drm_fb_helper_set_par+0x28/0x50 [drm_kms_helper]
[  224.991057]  [<ffffffffa056033d>] drm_fb_helper_hotplug_event+0x9d/0xe0 [drm_kms_helper]
[  224.999123]  [<ffffffffa060ec7f>] intel_fbdev_output_poll_changed+0x1f/0x30 [i915]
[  225.006653]  [<ffffffffa0551bb2>] drm_kms_helper_hotplug_event+0x22/0x30 [drm_kms_helper]
[  225.014786]  [<ffffffffa0551d9e>] output_poll_execute+0x19e/0x1e0 [drm_kms_helper]
[  225.022316]  [<ffffffff8105c7f2>] process_one_work+0x142/0x360
[  225.028120]  [<ffffffff8105ceba>] worker_thread+0x4a/0x450
[  225.033584]  [<ffffffff8156295a>] ? __schedule+0x28a/0x710
[  225.039034]  [<ffffffff8105ce70>] ? max_active_store+0x60/0x60
[  225.044836]  [<ffffffff8105ce70>] ? max_active_store+0x60/0x60
[  225.050631]  [<ffffffff81061c36>] kthread+0xc6/0xe0
[  225.055483]  [<ffffffff81061b70>] ? kthread_create_on_node+0x180/0x180
[  225.061973]  [<ffffffff81566e5f>] ret_from_fork+0x3f/0x70
[  225.067340]  [<ffffffff81061b70>] ? kthread_create_on_node+0x180/0x180
[  225.073827] Code: 48 29 c2 48 89 e5 48 89 d6 ba 02 00 00 00 e8 4d fe ff ff 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 8b 87 d8 04 00 00 55 48 89 e5 <48> 8b 40 d8 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 
[  225.094211] RIP  [<ffffffff8106219b>] kthread_data+0xb/0x20
[  225.099778]  RSP <ffff880276f53860>
[  225.103252] CR2: ffffffffffffffd8
[  225.106554] ---[ end trace 85d0e380afd4fdfd ]---
[  225.111146] Fixing recursive fault but reboot is needed!
[  225.116436] BUG: scheduling while atomic: kworker/3:1/437/0x00000003
[  225.122748] Modules linked in: btrfs(+) i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm fb fbdev intel_agp intel_gtt agpgart video backlight button synoacl_vfs(PO) hfsplus md4 hmac r8168(OE) ixgbe(E) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd mdio(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd ohci_hcd(E) usbcore usb_common kmrw(OE) [last unloaded: apollolake_synobios]
[  225.207576] CPU: 3 PID: 437 Comm: kworker/3:1 Tainted: P      D W  OE   4.4.59+ #23739
[  225.215437] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3455-ITX, BIOS P1.30 04/18/2017
[  225.224953]  0000000000000000 ffff880276f53588 ffffffff812b541d ffff88027fd93e80
[  225.232404]  0000000000013e80 ffff880276f53598 ffffffff81065f85 ffff880276f535e0
[  225.239855]  ffffffff81562ac4 0000000300000008 ffff8802764dd1c0 ffff880276f54000
[  225.247308] Call Trace:
[  225.249752]  [<ffffffff812b541d>] dump_stack+0x4d/0x70
[  225.254862]  [<ffffffff81065f85>] __schedule_bug+0x45/0x60
[  225.260313]  [<ffffffff81562ac4>] __schedule+0x3f4/0x710
[  225.265594]  [<ffffffff81562e17>] schedule+0x37/0x80
[  225.270534]  [<ffffffff81049b39>] do_exit+0x869/0xab0
[  225.275558]  [<ffffffff810073b4>] oops_end+0x84/0xc0
[  225.280491]  [<ffffffff8103a2eb>] no_context+0xfb/0x2b0
[  225.285689]  [<ffffffff811755b6>] ? fsnotify_destroy_marks+0x76/0x80
[  225.292006]  [<ffffffff8103a510>] __bad_area_nosemaphore+0x70/0x1f0
[  225.298232]  [<ffffffff8103a69e>] bad_area_nosemaphore+0xe/0x10
[  225.304118]  [<ffffffff8103a8e9>] __do_page_fault+0x79/0x370
[  225.309745]  [<ffffffff8103ac1c>] do_page_fault+0xc/0x10
[  225.315027]  [<ffffffff815681b2>] page_fault+0x22/0x30
[  225.320136]  [<ffffffff8106219b>] ? kthread_data+0xb/0x20
[  225.325514]  [<ffffffff8105d33c>] wq_worker_sleeping+0xc/0x90
[  225.331223]  [<ffffffff81562c2e>] __schedule+0x55e/0x710
[  225.336509]  [<ffffffff81562e17>] schedule+0x37/0x80
[  225.341447]  [<ffffffff810499a9>] do_exit+0x6d9/0xab0
[  225.346477]  [<ffffffff810073b4>] oops_end+0x84/0xc0
[  225.351415]  [<ffffffff8103a2eb>] no_context+0xfb/0x2b0
[  225.356609]  [<ffffffff8103a510>] __bad_area_nosemaphore+0x70/0x1f0
[  225.362837]  [<ffffffff8156295a>] ? __schedule+0x28a/0x710
[  225.368294]  [<ffffffff8103a69e>] bad_area_nosemaphore+0xe/0x10
[  225.374178]  [<ffffffff8103a8e9>] __do_page_fault+0x79/0x370
[  225.379803]  [<ffffffff81565f2d>] ? schedule_hrtimeout_range_clock+0x9d/0x100
[  225.386898]  [<ffffffff8103ac1c>] do_page_fault+0xc/0x10
[  225.392177]  [<ffffffff815681b2>] page_fault+0x22/0x30
[  225.397298]  [<ffffffffa04e0a6c>] ? send_vblank_event+0x2c/0x60 [drm]
[  225.403706]  [<ffffffffa04e0aeb>] drm_send_vblank_event+0x4b/0x70 [drm]
[  225.410289]  [<ffffffffa04e0b25>] drm_crtc_send_vblank_event+0x15/0x20 [drm]
[  225.417317]  [<ffffffffa05f1b8b>] intel_atomic_commit_tail+0x32b/0x10a0 [i915]
[  225.424504]  [<ffffffffa05597ab>] ? drm_atomic_helper_swap_state+0x14b/0x2f0 [drm_kms_helper]
[  225.432998]  [<ffffffffa05f2cbe>] intel_atomic_commit+0x3be/0x4e0 [i915]
[  225.439668]  [<ffffffffa04f8a85>] ? drm_atomic_add_affected_connectors+0x25/0xe0 [drm]
[  225.447545]  [<ffffffffa04f84d2>] drm_atomic_commit+0x32/0x50 [drm]
[  225.453779]  [<ffffffffa055ea76>] restore_fbdev_mode+0x156/0x280 [drm_kms_helper]
[  225.461222]  [<ffffffffa05603ae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x80 [drm_kms_helper]
[  225.470470]  [<ffffffffa0560428>] drm_fb_helper_set_par+0x28/0x50 [drm_kms_helper]
[  225.478001]  [<ffffffffa056033d>] drm_fb_helper_hotplug_event+0x9d/0xe0 [drm_kms_helper]
[  225.486065]  [<ffffffffa060ec7f>] intel_fbdev_output_poll_changed+0x1f/0x30 [i915]
[  225.493595]  [<ffffffffa0551bb2>] drm_kms_helper_hotplug_event+0x22/0x30 [drm_kms_helper]
[  225.501729]  [<ffffffffa0551d9e>] output_poll_execute+0x19e/0x1e0 [drm_kms_helper]
[  225.509256]  [<ffffffff8105c7f2>] process_one_work+0x142/0x360
[  225.515054]  [<ffffffff8105ceba>] worker_thread+0x4a/0x450
[  225.520508]  [<ffffffff8156295a>] ? __schedule+0x28a/0x710
[  225.525964]  [<ffffffff8105ce70>] ? max_active_store+0x60/0x60
[  225.531762]  [<ffffffff8105ce70>] ? max_active_store+0x60/0x60
[  225.537558]  [<ffffffff81061c36>] kthread+0xc6/0xe0
[  225.542410]  [<ffffffff81061b70>] ? kthread_create_on_node+0x180/0x180
[  225.548899]  [<ffffffff81566e5f>] ret_from_fork+0x3f/0x70
[  225.554263]  [<ffffffff81061b70>] ? kthread_create_on_node+0x180/0x180
[  241.319984] NMI watchdog: Watchdog detected hard LOCKUP on cpu 0
[  241.325789] Modules linked in: btrfs(+) i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm fb fbdev intel_agp intel_gtt agpgart video backlight button synoacl_vfs(PO) hfsplus md4 hmac r8168(OE) ixgbe(E) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd mdio(E) megaraid_sas(E) megaraid(E) mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd ohci_hcd(E) usbcore usb_common kmrw(OE) [last unloaded: apollolake_synobios]
[  241.410821] CPU: 0 PID: 7090 Comm: insmod Tainted: P      D W  OE   4.4.59+ #23739
[  241.418346] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3455-ITX, BIOS P1.30 04/18/2017
[  241.427851] task: ffff880274bb6400 ti: ffff88026eae4000 task.ti: ffff88026eae4000
[  241.435286] RIP: 0010:[<ffffffff810827dd>]  [<ffffffff810827dd>] queued_spin_lock_slowpath+0xfd/0x160
[  241.444479] RSP: 0018:ffff88027fc03e70  EFLAGS: 00000002
[  241.449763] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000100101
[  241.456856] RDX: ffff88027fc14940 RSI: 0000000000040000 RDI: ffff88027fd93e80
[  241.463944] RBP: ffff88027fc03e70 R08: 0000000000000001 R09: fffffffffffffff8
[  241.471036] R10: 00000000000010fc R11: 0000000000000000 R12: 0000000000000000
[  241.478128] R13: ffff88027fd93fd8 R14: 0000000000013e80 R15: ffff88027fd93e80
[  241.485222] FS:  00007f62ce52b700(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000
[  241.493258] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  241.498969] CR2: 00000000023d4108 CR3: 0000000274587000 CR4: 00000000003406f0
[  241.506064] Stack:
[  241.508069]  ffff88027fc03e80 ffffffff81566812 ffff88027fc03ee0 ffffffff81078e0b
[  241.515523]  ffffffff81983118 ffffffff81983100 0000000000000001 ffff880200000000
[  241.522980]  000000017fc03ee0 ffff88027fc0da40 ffffffff81983118 00000034630b8ba7
[  241.530431] Call Trace:
[  241.532873]  <IRQ> 
[  241.534796]  [<ffffffff81566812>] _raw_spin_lock+0x22/0x30
[  241.540447]  [<ffffffff81078e0b>] sched_rt_period_timer+0xeb/0x350
[  241.546589]  [<ffffffff81078d20>] ? put_prev_task_rt+0xb0/0xb0
[  241.552389]  [<ffffffff8109eb20>] __hrtimer_run_queues+0xb0/0x130
[  241.558446]  [<ffffffff8109eea7>] hrtimer_interrupt+0xa7/0x1b0
[  241.564245]  [<ffffffff810b0730>] ? proc_dma_show+0x60/0x60
[  241.569788]  [<ffffffff810303e3>] local_apic_timer_interrupt+0x33/0x60
[  241.576283]  [<ffffffff81030e38>] smp_apic_timer_interrupt+0x38/0x50
[  241.582607]  [<ffffffff8156780f>] apic_timer_interrupt+0x7f/0x90
[  241.588576]  <EOI> 
[  241.590499]  [<ffffffff810b0730>] ? proc_dma_show+0x60/0x60
[  241.596239]  [<ffffffff810b0f3d>] ? smp_call_function_many+0x1ed/0x250
[  241.602725]  [<ffffffff810b0fc4>] smp_call_function+0x24/0x40
[  241.608436]  [<ffffffff810b105a>] kick_all_cpus_sync+0x1a/0x20
[  241.614236]  [<ffffffff81120c77>] __do_tune_cpucache+0x47/0x2f0
[  241.620122]  [<ffffffff81120f61>] enable_cpucache+0x41/0xb0
[  241.625661]  [<ffffffff81561c7f>] setup_cpu_cache+0x17f/0x200
[  241.631374]  [<ffffffff81121399>] __kmem_cache_create+0x279/0x320
[  241.637435]  [<ffffffff810fe781>] kmem_cache_create+0x121/0x220
[  241.643325]  [<ffffffffa07a8000>] ? 0xffffffffa07a8000
[  241.648474]  [<ffffffffa07087dc>] btrfs_init_cachep+0x9c/0xe0 [btrfs]
[  241.654904]  [<ffffffffa07a8030>] init_btrfs_fs+0x30/0x13c [btrfs]
[  241.661046]  [<ffffffff810003b6>] do_one_initcall+0x86/0x1b0
[  241.666673]  [<ffffffff810df1d8>] do_init_module+0x56/0x1be
[  241.672213]  [<ffffffff810b554d>] load_module+0x1ded/0x2070
[  241.677754]  [<ffffffff810b28b0>] ? __symbol_put+0x50/0x50
[  241.683209]  [<ffffffff810b5959>] SYSC_finit_module+0x79/0x80
[  241.688921]  [<ffffffff810b5979>] SyS_finit_module+0x9/0x10
[  241.694463]  [<ffffffff81566b17>] entry_SYSCALL_64_fastpath+0x12/0x6a
[  241.700861] Code: 48 81 c1 40 49 01 00 48 03 0c c5 c0 ed 86 81 48 89 11 8b 42 08 85 c0 75 12 f3 90 8b 42 08 85 c0 74 f7 8b 0f 66 85 c9 74 09 f3 90 <8b> 0f 66 85 c9 75 f7 39 f1 75 13 8d 01 be 01 00 00 00 f0 0f b1 
[  241.721254] Kernel panic - not syncing: Hard LOCKUP
[  242.808208] Shutting down cpus with NMI
[  242.812031] Kernel Offset: disabled
[  242.815504] ---[ end Kernel panic - not syncing: Hard LOCKUP
  [H[J[1;1H[?25l[m[H[J[1;1H[2;20HGNU GRUB  version 2.02~beta2-36ubuntu3.14


[m[4;2H+----------------------------------------------------------------------------+[5;2H|[5;79H|[6;2H|[6;79H|[7;2H|[7;79H|[8;2H|[8;79H|[9;2H|[9;79H|[10;2H|[10;79H|[11;2H|[11;79H|[12;2H|[12;79H|[13;2H|[13;79H|[14;2H|[14;79H|[15;2H|[15;79H|[16;2H|[16;79H|[17;2H+----------------------------------------------------------------------------+[m[18;2H[19;2H[m     Use the ^ and v keys to select which entry is highlighted.          

      Press enter to boot the selected OS, `e' to edit the commands       

      before booting or `c' for a command-line.                           [5;80H [7m[5;3H*DS918+ 6.2 Baremetal with Jun's Mod v1.03a                                 [m[5;78H[m[m[6;3H DS918+ 6.2 Baremetal with Jun's Mod v1.03a Reinstall                       [m[6;78H[m[m[7;3H DS918+ 6.2 VMWare/ESXI with Jun's Mod v1.03a                               [m[7;78H[m[m[8;3H                                                                            [m[8;78H[m[m[9;3H                                                                            [m[9;78H[m[m[10;3H                                                                            [m[10;78H[m[m[11;3H                                                                            [m[11;78H[m[m[12;3H                                                                            [m[12;78H[m[m[13;3H                                                                            [m[13;78H[m[m[14;3H                                                                            [m[14;78H[m[m[15;3H                                                                            [m[15;78H[m[m[16;3H                                                                            [m[16;78H[m[16;80H [5;78H[22;1H   The highlighted entry will be executed automatically in 1s.                 [5;78H[22;1H   The highlighted entry will be executed automatically in 0s.                 [5;78H[?25h[H[J[1;1H[H[J[1;1H[H[J[1;1H[H[J[1;1Herror: no suitable video mode found.

Booting in blind mode

ÿ[    0.031338] Spectre V2 : kernel not compiled with retpoline; no mitigation available!
patching file etc/rc
patching file etc/synoinfo.conf
Hunk #2 FAILED at 266.
Hunk #3 FAILED at 311.
2 out of 3 hunks FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi ... [  OK  ]
:: Loading module mptctl ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
:: Loading module mdio ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[   39.871761] md: invalid raid superblock magic on sda3
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0... 
[   41.332931] sd 4:0:0:0: [synoboot] No Caching mode page found
[   41.338960] sd 4:0:0:0: [synoboot] Assuming drive cache: write through
/sbin/e2fsck -pvf returns 1
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
No upgrade file exists
End upgrade procedure
============upgrade
Wait 2 seconds for synology manufactory device
Sat Jul  7 09:02:21 UTC 2018
/dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=3897164k,nr_inodes=974291,mode=755 0 0
proc /proc proc rw,relatime 0 0

linuxrc.syno executed successfully.
Post init

==================== start udevd ====================
===== trigger device plug event =====
Sat Jul  7 02:04:01 2018


DiskStation login: System is going to reboot.
[  741.839034] reboot: Restarting system
 [H[J[1;1H[?25l[m[H[J[1;1H[2;20HGNU GRUB  version 2.02~beta2-36ubuntu3.14


[m[4;2H+----------------------------------------------------------------------------+[5;2H|[5;79H|[6;2H|[6;79H|[7;2H|[7;79H|[8;2H|[8;79H|[9;2H|[9;79H|[10;2H|[10;79H|[11;2H|[11;79H|[12;2H|[12;79H|[13;2H|[13;79H|[14;2H|[14;79H|[15;2H|[15;79H|[16;2H|[16;79H|[17;2H+----------------------------------------------------------------------------+[m[18;2H[19;2H[m     Use the ^ and v keys to select which entry is highlighted.          

      Press enter to boot the selected OS, `e' to edit the commands       

      before booting or `c' for a command-line.                           [5;80H [7m[5;3H*DS918+ 6.2 Baremetal with Jun's Mod v1.03a                                 [m[5;78H[m[m[6;3H DS918+ 6.2 Baremetal with Jun's Mod v1.03a Reinstall                       [m[6;78H[m[m[7;3H DS918+ 6.2 VMWare/ESXI with Jun's Mod v1.03a                               [m[7;78H[m[m[8;3H                                                                            [m[8;78H[m[m[9;3H                                                                            [m[9;78H[m[m[10;3H                                                                            [m[10;78H[m[m[11;3H                                                                            [m[11;78H[m[m[12;3H                                                                            [m[12;78H[m[m[13;3H                                                                            [m[13;78H[m[m[14;3H                                                                            [m[14;78H[m[m[15;3H                                                                            [m[15;78H[m[m[16;3H                                                                            [m[16;78H[m[16;80H [5;78H[22;1H   The highlighted entry will be executed automatically in 1s.                 [5;78H[22;1H   The highlighted entry will be executed automatically in 0s.                 [5;78H[?25h[H[J[1;1H[H[J[1;1H[H[J[1;1H[H[J[1;1Herror: no suitable video mode found.

Booting in blind mode

ÿ[    0.031331] Spectre V2 : kernel not compiled with retpoline; no mitigation available!
patching file etc/rc
patching file etc/synoinfo.conf
Hunk #2 FAILED at 266.
Hunk #3 FAILED at 311.
2 out of 3 hunks FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi ... [  OK  ]
:: Loading module mptctl ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
:: Loading module mdio ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[    5.609653] md: invalid raid superblock magic on sda3
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0... 
/sbin/e2fsck -pvf returns 0
Mounting /dev/md0 /tmpRoot
------------upgrade
[   10.748336] sd 4:0:0:0: [synoboot] No Caching mode page found
[   10.754368] sd 4:0:0:0: [synoboot] Assuming drive cache: write through
Begin upgrade procedure
No upgrade file exists
End upgrade procedure
============upgrade
Wait 2 seconds for synology manufactory device
Sat Jul  7 09:14:05 UTC 2018
/dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=3897164k,nr_inodes=974291,mode=755 0 0
proc /proc proc rw,relatime 0 0

linuxrc.syno executed successfully.
Post init

==================== start udevd ====================
===== trigger device plug event =====


dsm62 login: System is going to poweroff.
[ 1576.105098] reboot: Power down

 

Hide

 

a2 means alpha for a reason I guess. What's wrong with staying on 6.1 atm?

Share this post


Link to post
Share on other sites

nothing is wrong with 6.1.

 

but alpha or beta does not mean anything here -> there is never a loader that is labeled STABLE

as I remember 1.02a2 was used long time before 1.02b came out

 

I am using j3455 board so ds918+ would suit best to my system. and there is a new kernel in 6.2 on ds918+

Share this post


Link to post
Share on other sites
On 2018-05-29 at 7:49 AM, smokers said:

Would be really nice if it would be possible to override the maxdisk option of the synoconfig as a parameter. A system-update otherwise is not possible with more than 12 disks (without a rebuild or a loss if more than 14 disks.

2

 

Would really love this too as I use a 24 bay Supermicro with 12HDDs. Could anyone explain why it does this on more than 12 disks? Really sucks rebuilding all the time.

Share this post


Link to post
Share on other sites
8 hours ago, nevusZ said:

nothing is wrong with 6.1.

 

but alpha or beta does not mean anything here -> there is never a loader that is labeled STABLE

as I remember 1.02a2 was used long time before 1.02b came out

 

I am using j3455 board so ds918+ would suit best to my system. and there is a new kernel in 6.2 on ds918+

 

I didn't realise that, sorry.

Share this post


Link to post
Share on other sites
Posted (edited)
On 7/8/2018 at 6:04 AM, Nightingale said:

 

Would really love this too as I use a 24 bay Supermicro with 12HDDs. Could anyone explain why it does this on more than 12 disks? Really sucks rebuilding all the time.

 

as long as you have 12 disks and and they are connected to the first 12 ports you should not have any problems, its only a thing if you use a port above the count of 12 as this is the default for jun's loader (more or less by accident as 3615/3617 come with 12 from synology and jun refitted this "12" into his patch as he created 916+/918+ to have it as much like the "standard" used by most users until this point)

if you want a "smooth" update with more then 12 ports i see 2 ways (both not tested as i dont need it for my system)

 

1. install the update and when it reboots after the update (your 24 disk config was replaced by the default config from synology) do not boot the 1st time with your normal usb flash drive, use one with a live/recovery linux, after booting this mount the system partition (mdadm raid1 over all disks, this steps are part of the downgrade version howto), change synoinfo.conf's how you need it to be, reboot with normal dsm loader flash drive

 

2. (more difficult but universal if its done), juns loader patches the orgininal synoinfo.conf it it finds the "old" (aka original synology parts) synoinfo.conf entrys and if there will change it to what you usualy see with jun's loader, you would have to extract extra.lzma, rewrite the patch file inside extra.lzma to change the values in question to fit 24 drives and repack extra.lzma

in case of 916+/918+ its changed from 4 to 12, so should be easy to to as you can replace jun's values by your own, in case of 3615/3617 its much more complicated as the synology default is already 12 and jun's patch does not contain parts in that direction so you would have to extend the patch by creating new parts, needs more skills but possible

if done correct it only needs to be redone when creating a new flash drive or put in another extra.lzma (like for newer drivers)

 

 

Edited by IG-88

Share this post


Link to post
Share on other sites
Posted (edited)

just a small warning for people trying the 918+ with more then 2 NIC's (more precisely more then 2 network ports)

(same goes for 916+ i guess)

i had some fun with that as non working drivers and this "new" limit interfered confused me a little (driver working and no ethX)

the limit is there for years but not interfered when using the bigger business models that can have additional nic's

 

918+ has

maxlanports="2"

in synoinfo.conf (in /etc AND /etc.defaults) the standard for the "normal" 3615/3617 is "8"

to get more then two ports working you need to change this or you will and up with only eth0 and eth1

you can change maxlanport to 8

maxlanport="8"

and also should add values for ethX_mtu (if i remember correctly they where already up to eth3 - i guess - as there are 2 wifi usb allowed as addition to the two internal)

eth4_mtu="1500"
eth5_mtu="1500"
eth6_mtu="1500"
eth7_mtu="1500"

 

you might add wol options but imho not really needed

eth2_wol_options="d"
eth3_wol_options="d"
eth4_wol_options="d"
eth5_wol_options="d"
eth6_wol_options="d"
eth7_wol_options="d"

hopefully after sorting this out the extra.lzma will be tested soon

Edited by IG-88

Share this post


Link to post
Share on other sites

also another warning about bios settings for 918+ image

i have a hp prodesk 600 g2 for testing (skylake) and the booting was erratic and resulted often in kernel crashes

after swtichg off the legacy option in bios (no legacy, no secure boot) the system comes up stable every time when booting

the crash was related to 915i driver so i guess i've never seen this before as when testing 3615/3617 it does not matter and with 916+ testing i guess the i915 was not used when loading as it did not fit the (newer) hardware

Share this post


Link to post
Share on other sites
Posted (edited)

I wanted to try DSM 6.2 and the new loader and my i5-2500k/i5-4570 were not supported (although i5-4570 is on the list - maybee a network driver issue).

 

So I bought a ASRock J3455-ITX which seems to be the more promising. Here are my advices to those who would like try it too.

 

1/ Do not plug your USB stick on USB3 port. I got an error 13 during installation until I changed to USB2 port.

 

2/ Be patient. When I launch the system, It lasts sometimes 2 minutes or more to get an IP address. You can think it is not working whereas it is only super slow.

 

3/ Everything works fine including DSM 6.2 Update 1, except hardware transcoding. If you untick the box (see capture below) in videostation, everyting is fine. If you tick it, system gets frozen as soon as you launch a transcoding.

 

Maybee those advices are valid only for this motherboard/CPU.

 

Capture.PNG

Edited by Dark Zydor

Share this post


Link to post
Share on other sites
20 minutes ago, Dark Zydor said:

(although i5-4570 is on the list - maybee a network driver issue).

 

don't hold back about the nic, if we know what vendor/type (if its onboard neme the board) someone might be able to make a estimate (at least i will)

i5-2500k will be to old, 4th gen intel core seems to be the min. for 918+ - did you actually tried it? if yes i will add it so the not working section

about the i5-4570, we had at least 3 different reports (45xx/46xx/47xx) for Haswell to work

 

Share this post


Link to post
Share on other sites
29 minutes ago, Dark Zydor said:

3/ Everything works fine including DSM 6.2 Update 1, except hardware transcoding. If you untick the box (see capture below) in videostation, everyting is fine. If you tick it, system gets frozen as soon as you launch a transcoding.

 

i will add a comment about this one in m ylist

strange as J3455 is exactly the cpu that comes with the 918+

 

Share this post


Link to post
Share on other sites
Posted (edited)

- I tried both i5-2500k and i5-4570 and never got an IP address. So I was not able to go further. Indeed, i5-2500k seemed too old so I did not insist on it.

 

- Indeed, my bet was that using same CPU as 918+, It should work as well as possible. I will run more tests in the following days.

Edited by Dark Zydor

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, Dark Zydor said:

1/ Do not plug your USB stick on USB3 port. I got an error 13 during installation until I changed to USB2 port.

 

not a general problem, tried a fresh install from a usb3 port on my skylake test system, no problems, clean install

but should not be ignored when having error 13 problems, did see error 13 problems (vid/pid and pat file ok) on my C2550 system when testing 918+, might be something different but at least its not always wrong vid/pid

Edited by IG-88

Share this post


Link to post
Share on other sites

I guess this could be linked to controller driver or BIOS settings, so motherboard specific ? (That was a fresh install too)

 

I used default BIOS settings and I read here & there that there are some tweaks (AHCI, legacy settings...). Some of them could even solve the hardware transcoding problem ?

 

Here again, i will run some tests as soon as I have enough time.

Share this post


Link to post
Share on other sites

Someone here with Proxmox Virtualization and had success in installing Juns 1.03 Loader?

Share this post


Link to post
Share on other sites

 

i have uploaded the first version of my extra.lzma for 1.03a2/DSM 6.2 if anyone want to give it a try

in contrary to 916+ i got mpt2sas working so the often used lsi sas 9211 will work, also as its a new kernel we might give the hp smart array controllers a new try, the driver from kernel 4.4.59 is included for testing, if that does not work we can still try the driver from external source

 

defiantly not working (as in kernel 3.10.102 - its a synology mod thing) are all sata_* and pata_* drivers

 

 

  • Like 1

Share this post


Link to post
Share on other sites

Successfully migrate from 3617 to 918+ on Asrock J5005 with Gemini Lake Pentium Silver J5005 and + Driver extension jun 1.03a2/DSM6.2.x for DS918+.

Share this post


Link to post
Share on other sites
5 minutes ago, sersh said:

Successfully migrate from 3617 to 918+ on Asrock J5005 with Gemini Lake Pentium Silver J5005 and + Driver extension jun 1.03a2/DSM6.2.x for DS918+.

Could you check, if hardware encoding using intel quick sync is working with emby or plex?

Share this post


Link to post
Share on other sites

Sorry, I am newbie. Can you tell me how I can do it well? Sorry for my english...

Share this post


Link to post
Share on other sites
57 minutes ago, sersh said:

Sorry, I am newbie. Can you tell me how I can do it well? Sorry for my english...

Well you need a Movie on your NAS and Emby (a programm to organize movies and other things). Then you have to go into the settings of emby and enable hardware acceleration (intel quick sync) and start a video in another resolution. Finally check for the load on your Cpu and if it is as low as normal, then it works, if it goes above ~50% load, then it doesnt work.

Share this post


Link to post
Share on other sites

Does anybody know if Jun will be looking at an upgraded loader for the DS3615xs?  My cpu is too old to run the 918+ loader.

  • Like 2

Share this post


Link to post
Share on other sites
Posted (edited)

Hi guys,

 

I'm considering buying some new hardware to use Jun's new loader. Looking through @IG-88's great CPU list, there's only a couple CPU's that allow hardware transcode.

 

The J3455 CPU would probably be the best choice as it's identical to the 918+, but the Asrock J3455-ITX ("B" model?) board we have locally available only has 2 SATA ports whereas the Asrock J4205-ITX has 4 SATA and an M.2 slot. I would've jumped on it but looks like @x01015918 is having some trouble with it here and here.

 

Has anyone else confirmed whether the J4205 is actually working as nicely as the J3455 with Jun's loader and 6.1.2? Or do these issues also occur with non-synology J3455 boards?

Edited by ideasman69

Share this post


Link to post
Share on other sites

Hi 

 

I installed 918+ With loader 1.03a2  on My Asrock 3455-itx 

Everything is working exept emby hw encoding and WOL

 

Anyone know why the WOL is not working. 

The bios is setup right. Has been working With Windows

 

 

Share this post


Link to post
Share on other sites
1 hour ago, sersh said:

WOL switch enabled in DSM?

wol_switch_e.bmp

 

Yes.

I also tried to change the stuff in synoinfo.conf about WOL  

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.