• Announcements

    • Polanskiman

      DSM 6.2-23739 - WARNING   05/23/2018

      This is a MAJOR update of DSM. DO NOT UPDATE TO DSM 6.2 with Jun's loader 1.02b or earlier. Your box will be bricked.  You have been warned.   https://www.synology.com/en-global/releaseNote/DS3615xs
    • Polanskiman

      Email server issues - FIXED   06/14/2018

      We have been experiencing email server issues. We are working on it. Bear with us. Thank you. ------------- Problem has been fixed. You might receive duplicate emails. Sorry for that.
jun

Progress of 6.2 loader

Polanskiman

Let me get things straighten up here before this thread starts going sideways. This is the developper discussion room. Not a newbie forum to start asking for guides and whatnot. @jun hasn't even said anything about the loader he has uploaded to his repository. So I would advise self control. Also, to those in panic mode trying to make things work desperately please use your personal jugement and experience. If you want to have a positive contribution to this thread then please do so by posting about possible bugs or things that don't work (beyond the "no network" boring posts of course). I am talking about serious bugs or the such. All other requests will from now on be deleted or moved if appropriate. I have no time to babysit anymore. Use the forum subsections.

Message added by Polanskiman

Recommended Posts

Let me get things straighten up here before this thread starts going sideways. This is the developper discussion room. Not a newbie forum to start asking for guides and whatnot. @jun hasn't even said anything about the loader he has uploaded to his repository. So I would advise self control. Also, to those in panic mode trying to make things work desperately please use your personal jugement and experience. If you want to have a positive contribution to this thread then please do so by posting about possible bugs or things that don't work (beyond the "no network" boring posts of course). I am talking about serious bugs or the such. All other requests will from now on be deleted or moved if appropriate. I have no time to babysit anymore. Use the forum subsections.

  • Like 1

Share this post


Link to post
Share on other sites

Hi,

I have managed to go through installation but on first restart after instalation there is kernel panic. I have the same crash if i try to install ds916 version (ds3615 and ds3617 are working fine). My hardware is bare-metal MSI N3150I ECO (Celeron N3150) with 4Gb of ram and 3TB HDD). Board is flashed with latest available bios. I have attached screenshot with log.
 

Screenshot from 2018-06-11 13-03-23.png

  • Like 1

Share this post


Link to post
Share on other sites

Installed on GA-Z270n-wifi working fine with G4560 and 1.03 bootloader.

Share this post


Link to post
Share on other sites

Installed fine on ESXi 6.5 on a Kaby Lake Xeon.

 

Tried setting up a VMWare NVMe virtual disk, but DSM does not recognize it for SSD Cache.  It can see it using the command line tools, however.  It may be an issue with an enforced approved equipment compatibility list.

 

Will poke around a bit and report back.

Share this post


Link to post
Share on other sites

Cannot install on a drive on a secondary controller, but you probably knew that.  Also tried subbing a secondary/alternate controller on a running system, which also did not work.

The alpha tutorial indicates this, but the synoboot drive is not hidden (and you knew that too).

 

At some point if there are things you'd like the community to test, please post.  Bravo on a great alpha effort.

Share this post


Link to post
Share on other sites
11 hours ago, korotkov said:

Installed on GA-Z270n-wifi working fine with G4560 and 1.03 bootloader.

 

Did you install bare metal ? Did you upgrade from DSM 6.1 ?

 

I´ve same CPU and nearly the same motherboard (your MB: GA-Z270n-wifi; my MB: Gigabyte GA-H270N-WIFI)

Edited by sunshine
different motherboard

Share this post


Link to post
Share on other sites

 

4 часа назад, sunshine сказал:

 

Did you install bare metal ? Did you upgrade from DSM 6.1 ?

I installed on bare metal with jun's bootloader 1.03a2. On clean SSD, it worked fine some time and i decided to migrate my hdds. Migration failed so I reinstalled DSM 6.2 and set up as new DS.

It works but I have some issues with spontaneously reboots. Example: I installed some packages and it reboots itself. Wanted to index all video files - > rebooted.

And restart/shutdown not working. only helps pushing button reboots

 

PS.: htop shows only one core.

P.S.S: added logs dir. hope it helps

logs.zip

Edited by korotkov

Share this post


Link to post
Share on other sites
8 minutes ago, korotkov said:

 

I installed on bare metal. On clean SSD, it worked fine some time and i decided to migrate my hdds. Migration failed so I reinstalled DSM 6.2 and set up as new DS.

It works but I have some issues with spontaneously reboots. Example: I installed some packages and it reboots itself. Wanted to index all video files - > rebooted.

And restart/shutdown not working. only helps pushing button reboots

 

PS.: htop shows only one core.

P.S.S: added logs dir. hope it helps

logs.zip

Hi,

 

I have the same issue with reboots, or the whole server going offline even if it's powered up with network lights working. I have test hw transcoding and it seem to be working but it the processor is not boosting, I have j4205 and it stays at 1.5 ghz.

Share this post


Link to post
Share on other sites
17 минут назад, x01015918 сказал:

Hi,

 

I have the same issue with reboots, or the whole server going offline even if it's powered up with network lights working. I have test hw transcoding and it seem to be working but it the processor is not boosting, I have j4205 and it stays at 1.5 ghz.

I tried to test hardware transcoding and it is not working for me.

cat /usr/syno/etc/packages/VideoStation/codecs.conf

shows 

support_codec_h264="yes"

support_codec_vc1="yes"

support_codec_mpeg4part2="yes"

support_codec_aac="yes"

but when i try to open video thru VideoStation it shows error

 

 

also I didn't have this path to check activation of codecs /usr/syno/etc/codec/activation.conf 

Edited by korotkov

Share this post


Link to post
Share on other sites
1 minute ago, korotkov said:

I tried to test hardware transcoding and it is not working for me.

cat /usr/syno/etc/packages/VideoStation/codecs.conf

shows 

support_codec_h264="yes"

support_codec_vc1="yes"

support_codec_mpeg4part2="yes"

support_codec_aac="yes"

but when i try to open video thru VideoStation it shows error

I know from previous tries that you need original serial+mac, you can find some on google.

Share this post


Link to post
Share on other sites
1 минуту назад, x01015918 сказал:

I know from previous tries that you need original serial+mac, you can find some on google.

I did and entered them

Share this post


Link to post
Share on other sites
Il y a 1 heure, korotkov a dit :

I tried to test hardware transcoding and it is not working for me.

cat /usr/syno/etc/packages/VideoStation/codecs.conf

shows 

support_codec_h264="yes"

support_codec_vc1="yes"

support_codec_mpeg4part2="yes"

support_codec_aac="yes"

but when i try to open video thru VideoStation it shows error

 

 

also I didn't have this path to check activation of codecs /usr/syno/etc/codec/activation.conf 

 

Hi,

I have a good SN & MAC , activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc","mpeg4part2_dec","aac_dec","aac_enc","vc1_dec","vc1_enc","hevc_dec"],"token":"5xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx1"}

 

But no HW transcoding h264 or hevc in Plex (i have plex pass) or Video station 

Any idea ?

 

THx

Share this post


Link to post
Share on other sites
32 minutes ago, stefauresi said:

 

Hi,

I have a good SN & MAC , activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc","mpeg4part2_dec","aac_dec","aac_enc","vc1_dec","vc1_enc","hevc_dec"],"token":"5xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx1"}

 

But no HW transcoding h264 or hevc in Plex (i have plex pass) or Video station 

Any idea ?

 

THx

First you need to download the client from the web with plex pass active so you get the enable hw transcoding option, second you can force hw transcoding by disabling the direct play in player options

  • Like 1

Share this post


Link to post
Share on other sites
30 минут назад, stefauresi сказал:

Any idea ?

kernel: [  129.915482] i915: Unknown symbol acpi_lid_notifier_register (err 0)
kernel: [  129.915577] i915: Unknown symbol acpi_lid_notifier_unregister (err 0)
kernel: [  129.915600] i915: Unknown symbol acpi_lid_open (err 0)

i7-7700 is Kaby Lake

DS918+ Celeron J3455 is Apollo Lake

Share this post


Link to post
Share on other sites
6 hours ago, stefauresi said:

Hi,

I migrated successfully bare metal 6.1.7 (DS3617xs) to 6.2 (DS918+)

What motherborad and cpu are you using ? Looks like this is only working on new hardware...

Edited by painkiller895

Share this post


Link to post
Share on other sites
12 hours ago, korotkov said:

 

I installed on bare metal with jun's bootloader 1.03a2. On clean SSD, it worked fine some time and i decided to migrate my hdds. Migration failed so I reinstalled DSM 6.2 and set up as new DS.

It works but I have some issues with spontaneously reboots. Example: I installed some packages and it reboots itself. Wanted to index all video files - > rebooted.

And restart/shutdown not working. only helps pushing button reboots

 

PS.: htop shows only one core.

P.S.S: added logs dir. hope it helps

logs.zip

ok, so da actual reboot problem was on 6.1.7, since the pat file has the same name like 6.2 I installed 6.1.7, 6.2 it is more stable in that regard, still sometimes the network don't work soft reboot. 

Share this post


Link to post
Share on other sites
15 hours ago, stefauresi said:

Hi,

I migrated successfully bare metal 6.1.7 (DS3617xs) to 6.2 (DS918+)

I am curious how many drives you have in a volume and how many volumes.

 

My Specs for reference

P8Z68-V/GEN3 Motherboard

i7-2600k CPU @ 3.4Ghz

16GB RAM

2 x PERC H310 crossflashed to LSI-9211-8i IT Mode

7 x 3TB WD Red

4 x 4TB WD Red

All in a Rosewill 4U 15 bay chassis.

 

Currently on the 1.01 loader with DSM 6.1.7-15284

Edited by TWiST

Share this post


Link to post
Share on other sites
Il y a 1 heure, TWiST a dit :

I am curious how many drives you have in a volume and how many volumes.

 

My Specs for reference

P8Z68-V/GEN3 Motherboard

i7-2600k CPU @ 3.4Ghz

16GB RAM

2 x PERC H310 crossflashed to LSI-9211-8i IT Mode

7 x 3TB WD Red

4 x 4TB WD Red

All in a Rosewill 4U 15 bay chassis.

 

Currently on the 1.01 loader with DSM 6.1.7-15284

Il y a 10 heures, painkiller895 a dit :

What motherborad and cpu are you using ?

 

I have 1 x PERC H310 cross flashed to LSI-9211-8i IT Mode but not recognized by DSM (no driver in loader 1.03a2....) :?:

I use 2 x 8Tb , 3 x 6Tb and 1 x SSD 850 Pro 256Gb ( Motherboard Sata controller )

 

I roll back to DS916+ 6.1.7 for HW transcoding (activation ok but no HW in Video station or Plex) :(

 

Edited by stefauresi
  • Thanks 2

Share this post


Link to post
Share on other sites
58 minutes ago, stefauresi said:

 

I have 1 x PERC H310 cross flashed to LSI-9211-8i IT Mode but not recognized by DSM (no driver in loader 1.03a2....) :?:

I use 2 x 8Tb , 3 x 6Tb and 1 x SSD 850 Pro 256Gb ( Motherboard Sata controller )

 

I roll back to DS916+ 6.1.7 for HW transcoding (activation ok but no HW in Video station or Plex) :(

 

 

Thank you so much for taking the time to share your info with us!

Edited by TWiST

Share this post


Link to post
Share on other sites
[drm] Initialized i915  

[Sat Jun 16 13:14:33 2018] [drm] Initialized drm 1.1.0 20060810
[Sat Jun 16 13:14:33 2018] [drm] Memory usable by graphics device = 2048M
[Sat Jun 16 13:14:33 2018] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[Sat Jun 16 13:14:33 2018] [drm] Driver supports precise vblank timestamp query.
[Sat Jun 16 13:14:33 2018] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[Sat Jun 16 13:14:33 2018] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[Sat Jun 16 13:14:33 2018] acpi device:09: registered as cooling_device4
[Sat Jun 16 13:14:33 2018] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[Sat Jun 16 13:14:33 2018] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[Sat Jun 16 13:14:33 2018] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

Hide  

918c.thumb.png.b7f4f890da39d69f29a8e7d6e97df6d0.png

 

My Specs for reference:

ASRock N3150DC-ITX

Jun v1.03а2

 

Share this post


Link to post
Share on other sites

Hi,

 

Any Idea why scaling_driver is acpi-cpufreq and not INTEL_PSTATE? intel_pstate=enable don't work either.

 

Asrock J4205-ITX/Jun v1.03а2/6.2

 

cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_driver
acpi-cpufreq

/sys/devices/system/cpu/intel_pstate: No such file or directory

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now