Jump to content
XPEnology Community

DSM 6.1.7-15284


iaflyer
Message added by Polanskiman

READ the READ ME topic before posting. If your post gets deleted it's because you are not complying with the guidelines.

 

Recommended Posts

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.4

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - Nec - Pentium4HT

- Additional comments: REBOOT REQUIRED - Only use for backup

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS916+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J3455-ITX, HP NC110T

- Additional comments: REBOOT REQUIRED before and after.  Kept getting "Unknown Error 21" until I reboot before it would update. 

Edited by deklan
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update:  DSM 6.1.6 15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L

- Additional comments  REBOOT REQUIRED 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

-  Using custom extra.lzma: YES - extra.lzma for DS3617 v4.7 from IG-88

- Installation type: BAREMETAL - Asrock H270M-ITX/AC +G4560

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - ASRock Z170 Extreme6

- Additional comments:  REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: Jun's Mod V1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HPE Proliant MicroServer Gen8

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3617xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Proliant N40L

- Additional comments: Reboot required. Data analytics message when logging in.

Edited by dan90joe
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: Proxmox VE

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: Asrock H110M-ITX

- Additional comments: REBOOT REQUIRED. Data analytics message when logging in.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: Jun's Mod V1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: HP Proliant MicroServer Gen8

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

XPE#1:

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs - SHR1

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS P5Q - INTEL Q6300 + ASM1061

- Additional comments: REBOOT REQUIRED

 

XPE#2:

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3617xs - SHR1

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS P5QL Pro - INTEL Q6600 + ASM1061

- Additional comments: REBOOT REQUIRED

 

XPE#3:

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs - SHR1

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - Gigabyte 880GA-UD3H - AMD Phenom II X6 1090T + ASM1061

- Additional comments: REBOOT REQUIRED

 

XPE#4:

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs - SHR1

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI MS-7607 - INTEL Q8400 + ASM1061

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL after reinstall

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: Baremetal - HP Gen8

- Additional comments: REBOOT REQUIRED - After reboot it didn't come up on network, had to manually restart a than had to reinstall. After that everything OK.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6 15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: ESXi 6.0 U3

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: Jun's Mod V1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HPE Proliant MicroServer Gen8

- Additional comments: REBOOT REQUIRED

  • Like 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: No

- Installation type: QNAP TS-853A 8 Disk /w Internal Apacer Boot Drive (no usb needed)

- Additional comments: Updated through Control Panel, reboot required. 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.5-15266 Update 1
- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO
- Installation type: BAREMETAL - TERRAMASTER F2-220
- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI C847MS-E33 - Intel Celeron 847 

- Additional comments: REBOOT REQUIRED

Edited by mrma
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-EP45-UD3LR - Intel Q9500 

- Additional comments: REBOOT REQUIRED

Edited by Fireball
Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.1.5 15254

- Loader version and model: Jun's Loader v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: Esxi 6.5 Dell 710

- Additional comments: Can't even create a new VM with Esxi 6.5 using 6.1.7  (DSM_DS3617xs_15284.pat) 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.6-15266 Update 1
- Loader version and model: Jun's Loader v1.02b - DS3615xs
- Using custom extra.lzma: No
- Installation type: BAREMETAL - HP Proliant N40L
- Additional comments: Reboot required.


- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.5-15266 Update 1
- Loader version and model: JUN'S LOADER v1.02b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - TerraMaster F2-220
- Additional comments: Reboot required.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - ASRock H87M-ITX

- Additional comments: NO REBOOT REQUIRED

Edited by Jacopo Bassan
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3617xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Beyang/Runing Intel X79 + E5-2609 

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.6-15266

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Supermicro X8DAH+-F

- Additional comments: REBOOT REQUIRED, volume crashed had to reset "max disks" variables to fix.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...