lolo130 Posted April 10, 2018 Share #1 Posted April 10, 2018 Hi Everyone, I've a nightmare since couple of days and I'm not sure how bad I did damage my HP EX470 !! Basically I've a HP EX470 running on AMD sempron 3400+ with 2GB Ram and ESD 256MB I've decided to put Xpenology on it using the loader and after many digging on the forum I found the 6.1 MBR loader is the one that people kept saying it works good with AMD and I flashed that to my USB after modifying the VID/PID ... BUT my pc was going through kernel panic and freezes and basically hangs there not responding to anything I input neither DEL nor ctrl+alt+del .. nothing at all !! so I thought it's because of the USB flash drive ... so STUPID me decided to wipe the internal ESD via Acronis Disk Director booted via Hiren's USB boot and clone the xpenology USB contents including the partition table to the current ESD !! I thought it will pass the power on self check BUT ... another kernel attack and I can't even do anything at all ... no access to bios settings or boot from external device or anything .. I know loads of people will swear at me ,,but any help will be appreciated Link to comment Share on other sites More sharing options...
sbv3000 Posted April 10, 2018 Share #2 Posted April 10, 2018 strip everything out and do a bios reset using the onboard jumpers and disconnect the psu. install minimum components (memory) to get the system back, then try the 6.02 loader, which has better amd support. Link to comment Share on other sites More sharing options...
lolo130 Posted April 11, 2018 Author Share #3 Posted April 11, 2018 done all of that but still no joy ... !! Any more help please ? will a video of my scenario will help you guys in diagnosis ? Link to comment Share on other sites More sharing options...
lolo130 Posted April 13, 2018 Author Share #4 Posted April 13, 2018 any more ideas guys Link to comment Share on other sites More sharing options...
lolo130 Posted April 14, 2018 Author Share #5 Posted April 14, 2018 Just would like to say I've managed partially to resolve the issue by desoldering the storage chip which does mean that there's no HDD connected to the PC Link to comment Share on other sites More sharing options...
lolo130 Posted April 14, 2018 Author Share #6 Posted April 14, 2018 any ideas please on a working loader of AMD Sempron 3400+ Link to comment Share on other sites More sharing options...
lolo130 Posted April 15, 2018 Author Share #7 Posted April 15, 2018 I've sorted the issue of my built-in drive 256mb and I've decided to replace the internal storage with another chip of 256mb and issue disappeared. I need now a working loader with my AMD processor and what's last update I can go for ? A quick reply will be appreciated Link to comment Share on other sites More sharing options...
sbv3000 Posted April 15, 2018 Share #8 Posted April 15, 2018 try the 6.0.2 loader - 'best' for amd Link to comment Share on other sites More sharing options...
lolo130 Posted April 15, 2018 Author Share #9 Posted April 15, 2018 apologies sir, but there's load of link here in the forum .. can you please share the link with me here and I'll update you with the result in 10 minutes after that .. I've fast broadband. Thank you and much appreciated Link to comment Share on other sites More sharing options...
lolo130 Posted April 15, 2018 Author Share #10 Posted April 15, 2018 just downloaded the 6.0.2 from the main topic the one that is DS3615xs 6.0.2 Jun's Mod V1.01.zip and ended up with same thing ... DOS freezing and not able to do anything not even DEL to go bios !! any help please ? Link to comment Share on other sites More sharing options...
lolo130 Posted April 16, 2018 Author Share #11 Posted April 16, 2018 After all what i have tied so far of injecting the extra.izma and bzImage both at once and separately 2 different times both with loader JUN 1.0 with no success and no help either , please close the topic that is useless to have ! Link to comment Share on other sites More sharing options...
Polanskiman Posted April 17, 2018 Share #12 Posted April 17, 2018 Perhaps you should read the FAQs before downloading whatever file you see. Everything is clearly mentioned there. There is also a topic with all available loaders that have been produced to this date. As for you problem it seems a hardware problem. This doesn't look to be a problem with the loader. Maybe you can search in google if you find any hardware specific issue with your model. Also try a BIOS update if possible. Link to comment Share on other sites More sharing options...
lolo130 Posted June 25, 2018 Author Share #13 Posted June 25, 2018 Thank you for your reply sir, but believe me I've read all FAQs before to post asking for help ... I'd tried all available loaders but nothing worked at all ... The device by itself was not faulty as it could boot from usb different things like live.linux and windows boot usb and linux.partedMagic etc. etc. .... only the loader didn't want to work. I've binned that device now as it was really old and I'm running DELL Optiplex 7010 with Intel Core i5 2400 and 32G ram ... Thank you for the follow up and you can close this topic now Link to comment Share on other sites More sharing options...
Recommended Posts