neeiro Posted April 5, 2018 Share #1 Posted April 5, 2018 I've had to reinstall my DSM because of Bad sectors on a disk. I reinstalled the DSM by putting a new hard drive in and installing DSM to that (only drive present at the time) Now when I try to install VMM im getting the error 'Failed to Create the Cluster', I'm using the correct MAC addresses for the Nics (theres 4), I've tried enabling open vswitch but I'm still getting the error. I had VMM running perfectly before the reinstall - will there be any rogue settings left on the other volumes that I have reinstalled on the system. Any ideas? Quote Link to comment Share on other sites More sharing options...
neeiro Posted April 6, 2018 Author Share #2 Posted April 6, 2018 I've managed to solve this myself by completely reinstalling the loader (with a new serial), not sure if the serial number is attached to the old setup and was the problem. I also updated the extra file in the loader so I'm not too sure which actions fixed it. Quote Link to comment Share on other sites More sharing options...
nicocalv Posted September 29, 2019 Share #3 Posted September 29, 2019 Hello, I have this problem too. I have done several reinstallation with several keys. I also tested with Bootloader v1.02b and Bootloader v1.03b, but nothing works. I am now with the Bootloader v1.03b and DSM 6.2-23739 under the model DS3617xs. Someone would have a solution to give me? Thank you in advance for your help. Nicolas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.