• 0
Dasoft

DSM 6.1.6-15266 flash drive fail

Question

Posted (edited)

Hello,

I would like to ask you for help. I have two same USB flashes with the same VID and PID. I created bootloader for booth drives and from one I installed  DSM 6.1.6-15266 without any problems. 

After them, i copied sam video files from my wedding. For a two days later  was turn off the electricity and original flash drive is bad. Can not write read anything. 

So I changed flash disc for other new one , which I created together with the bad disc but disk station cannot start. Bootloader is runnig fine     

Bootloader is  ds3617xs 6.1 Jun’s Mod V1.02a2

Thank you!                                                            

 

 

Edited by Dasoft

Share this post


Link to post
Share on other sites

5 answers to this question

Recommended Posts

  • 0

When you create a boot loader it will be the specific DSM version (15047 I think). when you upgrade DSM manually or through Control Panel it updates the boot loader with matching version.

So, if your boot loader is corrupted and you flash a new one, that will be 15047. You will need a spare hdd on which to install DSM (disconnect your raid disks) and upgrade it so that it 'writes back' the updates to the boot loader. You can then use that 'updated' loader to boot your system and it should be ok.

Share this post


Link to post
Share on other sites
  • 0
26 minutes ago, sbv3000 said:

When you create a boot loader it will be the specific DSM version (15047 I think). when you upgrade DSM manually or through Control Panel it updates the boot loader with matching version.

So, if your boot loader is corrupted and you flash a new one, that will be 15047. You will need a spare hdd on which to install DSM (disconnect your raid disks) and upgrade it so that it 'writes back' the updates to the boot loader. You can then use that 'updated' loader to boot your system and it should be ok.

 

This is perfect solution! I will try it and let you know! 

DMS is automatic downloaded from synology server where the last version is during Xpenology installed.

Share this post


Link to post
Share on other sites
  • 0
53 minutes ago, Dasoft said:

 

This is perfect solution! I will try it and let you know! 

DMS is automatic downloaded from synology server where the last version is during Xpenology installed.

Its recommended to disable automatic updates of DSM to stop 'unstable' (v XPE) versions being installed !

Share this post


Link to post
Share on other sites
  • 0

Good morning,

 

I'm trying it now and works it perfectly! All data and settings are fine.

I used the same PAT file as Xpenology has.

I disabled auto update and saved the current PAT file for case for the next flash disk fault.

 

Thank you so much!!!!!!

Share this post


Link to post
Share on other sites
  • 0
The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.