mykia Posted March 30, 2018 Share #1 Posted March 30, 2018 (edited) My system consists of: motherboard: Asrock n68-gs3 ucc 2 GB of Memory ddr3-1333 corsair 2 HDD WD red WD10EFRX 1.0Tb because the system is seen I had to update extra.lzma to 4.7 but the system it does not go beyond online recognition when I install DSM crashes they are recognized the network parameters but the installation on the disks crashes because I fear that the system believes that they are not present as seen by the photo Edited March 30, 2018 by mykia Quote Link to comment Share on other sites More sharing options...
mykia Posted March 30, 2018 Author Share #2 Posted March 30, 2018 (edited) This image concerns the same hardware but with xpenoboot 5.2.5967 that does not implement the dsm 5.2.5967 Update6 the same disks are regularly installed but I have to proceed with the realization of the volumes Edited March 30, 2018 by mykia Quote Link to comment Share on other sites More sharing options...
mykia Posted March 30, 2018 Author Share #3 Posted March 30, 2018 Quote Link to comment Share on other sites More sharing options...
IG-88 Posted April 1, 2018 Share #4 Posted April 1, 2018 if the ahci driver does not work then it might need the sata_nv.ko but all sata_* drivers form the dms 6.1 synology kernel source do not work because of changes synology made you can verify by booting a live linux and check about the drivers used with lspci -k | grep 'Kernel driver' as far as i can find nForce 630a -> MCP68 -> ahci driver (did you check bios that the sata ports are usind ahci - if there is any option) Quote Link to comment Share on other sites More sharing options...
mykia Posted April 16, 2018 Author Share #5 Posted April 16, 2018 no, unfortunately the option "AHCI" is not available and also with the raid function activated , it does not work. Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted April 17, 2018 Share #6 Posted April 17, 2018 It may be easiest to buy a cheap supported sata pci-x1 card and disable the onboard ide/sata. https://www.amazon.co.uk/Syba-SI-PEX40064-Controller-Profile-Brackets/dp/B00AZ9T3OU Quote Link to comment Share on other sites More sharing options...
mykia Posted December 27, 2020 Author Share #7 Posted December 27, 2020 for Plex Update: who, like me, have the old DSM 5.2 on. it may affect the ability to install the latest version of Plex I have some tips to be able to do it - and i believe it can be done on any machine that refuses manual update .... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.