Jump to content
XPEnology Community
Message added by Polanskiman

I have added an additional line to be populated. Example shown below:

 

-  Using custom extra.lzma: YES - extra.lzma for DS3617 v4.7 from IG-88

 

It should be added below the  '- Loader version and model:' line.

 

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254

- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L

- Additional comments: updated okay had a drive crash 2 weeks back main drive with all apps dockers installed on so still busy setting it all up , first reboot in 2 weeks. SMB never came up restarted service all working and remote mounted folders.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock Rack D1520-D4I

- Additional comments: REBOOT REQUIRED, SYNOINFO.CONF RESET IN /ETC.DEFAULTS/, PARTIALLY RESET IN /ETC/ (maxdisks reset, esataportcfg/usbportcfg/internalportcfg stuck)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.5.0 Update 1 Build 7967591

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.1.5 15254 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3617xs

- Using custom extra.lzma:  NO

- Installation type: ESXi 6.5u1 / open-vm-tools 10.1.15-4 / single SSD VMDK (no pysical disks)

- Additional comments: REBOOT REQUIRED &  REPERATION REQUIRED

This is my second instance and it had the same problem like the first. Seems like a general problem with DS3617xs Bootloader on ESXi. On the third system I am going to uninstall open-vm-tools before the update. On this instance the Docker package fails to start. A reinstalltion didn't help so far. I am glad it didn't happend on one of my main machines. // Update: the static ip was set to dhcp. After setting a static ip, the docker package started to work again.

 

Edited by haydibe
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - TX100 S3

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM (ESXi 6.0) AMD CPU 4284

- Additional comments: DSM not found on lan after auto update, manual update, or a clean install of 6.1.6.  Reinstalled 6.1.5 DS3671xs, all is now Good.

Wanted to see if DS3615 had the same problem so I did a fresh install of DSM 6.1.5-15254 with the above loader for DS3615xs, works well, then did a manual update to DSM 6.1.6 with no problems. For me this shows I now have to use DS3615xs going forward.

Edited by GaryM
extra info
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: ESXi 6.5.0 Update 1 Build 7967591 on HP Gen 8

- Additional comments: REBOOT REQUIRED

Edited by pigr8
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.5-15254 Update 1
- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO
- Installation type: BAREMETAL - TERRAMASTER F2-220
- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: YES - extra.lzma for DS3617 v4.5 from IG-88

- Installation type: BAREMETAL -  ASRock Z77-Pro4-M

- Additional comments: REBOOT REQUIRED, after update, refresh the img with v4.7 extra.lzma to the loader.

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.1.5 15254 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3617xs

- Using custom extra.lzma:  NO

- Installation type: ESXi 6.5u1 / open-vm-tools 10.1.15-4 uninstalled before update / Passed-through LSI 2008 Controller + SSD VMDK

- Additional comments: REBOOT REQUIRED &  REPERATION REQUIRED

... finaly my third update on ESXi 6.5u1 failed as well. I had updates with passed-through controllers and without. I had updates with open-vm-tools installed and without. The outcome was always the same: a migration to Jun's Loader v1.02b - DS3615sx was necessary to get the sytem up and running again. I wonder why on my first system the static ip remained untouched, while it was set on dhcp on my other two systems. Just changing from dhcp to a static ip was not sufficient to get the Docker package running again. A restart DSM restart was.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

-  Using custom extra.lzma: YES - extra.lzma for DS3617 v4.7 from IG-88

- Installation type: BAREMETAL - Asrock H270M-ITX/AC +G4560

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update:  DSM 6.1.5-15254 Update 1

- Loader version and model:  JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: Baremetal (MSI B150M PRO VH, Pentium G4400)

- Additional comments:  REBOOT REQUIRED

Link to comment
Share on other sites

-Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254

- Loader version and model: JUN'S LOADER v1.02b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BareMetal - Intel DG33M06

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.3 upd 7 (or 5?)

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Zotac Fusion 350 - AMD E-350

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.5-15254 Update 1
- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: NO
- Installation type: Baremetal (HP Proliant MicroServer Gen8)
- Additional comments: REBOOT REQUIRED

Edited by coalfield
Added extra.lzma
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: YES - extra.lzma for DS3615 v4.7 from IG-88

- Installation type: DELL PowerEdge T410 (Intel Xeon CPU E5520 @ 2.27GHz)

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: 6.1.3-15152 Update 7

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments: REBOOT REQUIRED - Failing HHD prior to update, not recognized after update resulting in a degraded volume.  Most likely unrelated to update.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.5-15254 Update 1
- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Proliant MicroServer Gen8
- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: Jun's Loader v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox VE 4.4-18

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock C2550D4I

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.5-15254 Update 1

- Loader version and model: JUN'S LOADER v1.02b - DS916

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3160DC-ITX

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...