Medikherb Posted March 7, 2018 Share #1 Posted March 7, 2018 So I have a i5-750 on gigabyte ga-p55a-ud3 (rev 1.0) with 16gb of ram. I currently have 3x8tb, 3x4tb, and 2x500g ssd, attached to it. I added an LSI 9211-8i (in it mode) and when I booted it the ram is now only 8gb and cannot and drives attached to the lsi controller are not recognized by DSM, but are seen by lsi bios. I have tried tireleshsly to fix this but cannot. PLEASE HELP. Quote Link to comment Share on other sites More sharing options...
lowca Posted March 8, 2018 Share #2 Posted March 8, 2018 try this Quote Link to comment Share on other sites More sharing options...
IG-88 Posted March 8, 2018 Share #3 Posted March 8, 2018 hi, beside the ram problem there is also a problem with the sata port count, default config is 12 drives, you have 6 + 8 = 14 drives, depending on where your drives are connected there might be 2 missing, to use all ports you need to change synoinfo.conf (and after major updates like 6.1.4->6.1.5, ~200MB pat file) you will have to redo it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.