Xepnewbie2018 Posted February 26, 2018 Share #1 Posted February 26, 2018 Hello Xepnology Community....I am very enthusiastic about leaning and testing out this platform. I am having issues installing it into a fan-less Intel motherboard Intel® Desktop Board D510MO. I have tried out 3 different flash drives thinking that there might an issue with it, but still no luck. I went ahead and try another motherboard setup with the same 3 flash drives and it worked, so i can take the flash drive out of the equation. I have done some reading thru the forum but didn't find anyone else with the same motherboard in question. Any suggestion would be greatly appreciated. https://ark.intel.com/products/42645/Intel-Desktop-Board-D510MO Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted February 27, 2018 Share #2 Posted February 27, 2018 9 hours ago, Xepnewbie2018 said: Hello Xepnology Community....I am very enthusiastic about leaning and testing out this platform. I am having issues installing it into a fan-less Intel motherboard Intel® Desktop Board D510MO. I have tried out 3 different flash drives thinking that there might an issue with it, but still no luck. I went ahead and try another motherboard setup with the same 3 flash drives and it worked, so i can take the flash drive out of the equation. I have done some reading thru the forum but didn't find anyone else with the same motherboard in question. Any suggestion would be greatly appreciated. https://ark.intel.com/products/42645/Intel-Desktop-Board-D510MO Looking at the spec the hardware should be ok, but it would help if you could describe more what you mean by 'no luck'. Are you seeing it boot ok but not found on lan, could be the nic. If its not booting then could be another issue, try debugging with a serial connection. But post any info in the meantime. Quote Link to comment Share on other sites More sharing options...
Xepnewbie2018 Posted February 27, 2018 Author Share #3 Posted February 27, 2018 sbv3000...thanks for the fast reply.......it never boots into or posts any information into the screen....I can actually see the flash drive blinking like it is reading the drive to start the process, but then it stops flashing and continues into the windows operating systems. Quote Link to comment Share on other sites More sharing options...
creisey Posted March 21, 2018 Share #4 Posted March 21, 2018 (edited) it does not work neither for me... there is luck with dsm 5.2 i tried the XPEnoboot_DS3615xs_5.2-5644.5.iso that seems to work check with google most mirrors are down but i found one on a japanese server that worked Edited March 21, 2018 by creisey Quote Link to comment Share on other sites More sharing options...
IG-88 Posted March 21, 2018 Share #5 Posted March 21, 2018 if it does not boot (grub selection) then you can try the mbr loader (but there are cases that dont with with taht either, i have a older hp sff desktop with that problem) Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted March 22, 2018 Share #6 Posted March 22, 2018 13 hours ago, creisey said: it does not work neither for me... there is luck with dsm 5.2 i tried the XPEnoboot_DS3615xs_5.2-5644.5.iso that seems to work check with google most mirrors are down but i found one on a japanese server that worked Not sure what is down but all bootloaders are available in this very forum and links are valid. The topic with all loaders is pinned and featured in the Loader section and titled: 'Links to Loaders' In fact you are not even using the last version of the bootloader for DSM 5 which is XPEnoboot_DS3615xs_5.2-5967.1 Quote Link to comment Share on other sites More sharing options...
Sarunas Posted April 9, 2018 Share #7 Posted April 9, 2018 I'm having it running - so the quirk is to update bios to the latest one. After that it starts to recognise USB drive. Here the link to downloads: https://downloadcenter.intel.com/product/42645/Intel-Desktop-Board-D510MO PS. Please read bios update guide - I needed to do upgrades in few steps Quote Link to comment Share on other sites More sharing options...
Airdream Posted April 26, 2018 Share #8 Posted April 26, 2018 On 2/27/2018 at 6:08 AM, Xepnewbie2018 said: Hello Xepnology Community....I am very enthusiastic about leaning and testing out this platform. I am having issues installing it into a fan-less Intel motherboard Intel® Desktop Board D510MO. I have tried out 3 different flash drives thinking that there might an issue with it, but still no luck. I went ahead and try another motherboard setup with the same 3 flash drives and it worked, so i can take the flash drive out of the equation. I have done some reading thru the forum but didn't find anyone else with the same motherboard in question. Any suggestion would be greatly appreciated. https://ark.intel.com/products/42645/Intel-Desktop-Board-D510MO Me toooo, I'm using INTEL D510MO motherboard. It worked well on XPEnoboot_DS3615xs_5.2 with SANDISK CZ33 USB drive. Last month I tried upgrade to DS3615xs 6.1 Jun's Mod V1.02b, the USB driver work well on other PC(Asus H55M + i3 530), but the loader did not work on INTEL D510MO motherboard(NM10 chipset,ATOM cpu), it juest blinking with a black screen, no any words. I think grub does not start loading. (Forgive my poor English) Quote Link to comment Share on other sites More sharing options...
liviugi Posted May 20, 2018 Share #9 Posted May 20, 2018 Hello, I have Xpenology installed and running fine on D510MO. I use a non-branded 4GB USB stick. The only issue with this motherboard is that sometimes I need to go into BIOS and re-select USB to boot first. USB not seen in BIOS after I reboot the server from Synology's admin portal. If I shutdown and start the server, it boots fine from USB. Quote Link to comment Share on other sites More sharing options...
creisey Posted June 4, 2018 Share #10 Posted June 4, 2018 (edited) i guess the best would be to run libreboot.. but i havent had luck with flashing it over the bios... its fully supported as shown here https://www.mirrorservice.org/sites/libreboot.org/release/stable/20160907/rom/grub/ one other question i have, does anyone of you got drive-sleep working? im guessing that would give a massive power-saving potential... Edited June 4, 2018 by creisey Quote Link to comment Share on other sites More sharing options...
creisey Posted March 7, 2019 Share #11 Posted March 7, 2019 i was successful with libreboot, DSM 6.1.X runs smoothly the only thing is, by default grub is trying to boot to the harddrive instead of the USB-thumb-drive.. there is a tutorial on libreboot.org but its a bit complicated. right now i need to select the drive by hand on a fresh bootup Quote Link to comment Share on other sites More sharing options...
Vulture Posted January 17, 2022 Share #12 Posted January 17, 2022 hi, im using D510MO, i can boot from jun loader 1.03b (3615xs version), but synology assistant cannot find any device in my network, and i cannot find any new device in my router client list. i've tried extra.lzma v0.11 and extra.lzma v0.5, but i still cannot find xpenology, what should i do to fix this, thanks Quote Link to comment Share on other sites More sharing options...
Vulture Posted January 17, 2022 Share #13 Posted January 17, 2022 btw, its ok now, i just disable uefi boot, and it shows on my network, thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.