Recommended Posts

Hi all, I'm back :grin:

 

gnoboot, great work as usual. Using your latest image with the 5.0-4458 release, it's working fine so far. Only issue I have is that there's no sit0 support, and I can't initiate a tunnel through Hurricane Electric :/

 

Is there any chance that you could compile it into the next release?

Link to post
Share on other sites

Does anybody have a problem where a virtual machine with DSM5.0-4458 would shutdown every day a random time because of "disk overheating" ?

Disks are virtual, how can they overheat ? :smile:

 

Also from /var/log/messages i frequently have such errors :

 

Mar 25 15:05:01 DSMesxi5 SystemInfo.cgi: disk_info_get.c:82 Failed to open /dev/sdc, errno=No such file or directory

 

And last few lines before it shutdown :

 

Mar 19 19:20:42 DSMesxi5 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance
Mar 19 19:20:47 DSMesxi5 synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [iNTERNAL] [/dev/vg1000/lv] [/volume1
Mar 19 19:20:47 DSMesxi5 kernel: [ 1749.903284] md: md2: set sdd5 to auto_remap [0]
Mar 19 19:20:47 DSMesxi5 kernel: [ 1749.903286] md: md2: set sdf5 to auto_remap [0]
Mar 19 19:20:47 DSMesxi5 kernel: [ 1749.903288] md: md2: set sde5 to auto_remap [0]

 

 

Mar 20 18:34:06 DSMesxi5 findhostd: findhostd.c:119(FHOSTDProcessNameGet) open [/proc/30933/cmdline] fail:(2)[No such file or
Mar 20 18:34:06 DSMesxi5 findhostd: findhostd.c:69(FHOSTDExit) exit on signal[15]
Mar 20 18:34:06 DSMesxi5 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
killall: synolunbkp: no process killed
Mar 20 18:34:11 DSMesxi5 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance
Mar 20 18:34:15 DSMesxi5 synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [iNTERNAL] [/dev/vg1000/lv] [/volume1
Mar 20 18:34:16 DSMesxi5 kernel: [27216.870381] md: md2: set sdd5 to auto_remap [0]
Mar 20 18:34:16 DSMesxi5 kernel: [27216.870383] md: md2: set sdf5 to auto_remap [0]
Mar 20 18:34:16 DSMesxi5 kernel: [27216.870385] md: md2: set sde5 to auto_remap [0]

 

And this are always the last line before each forced shutdown. Any info on that?

Link to post
Share on other sites

@Gnoboot

Hello Gnoboot,

i have made a output file with ubuntu just like you asked.

i hope you can help me with the intel centrino n-2230 wifi card.

thanks for your time.

gr marc

 

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: Gigabyte Technology Co., Ltd Device 5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
Capabilities: 

00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device d000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=3]
Expansion ROM at  [disabled]
Capabilities: 
Kernel driver in use: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: 
Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device 1c3a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7d1a000 (64-bit, non-prefetchable) [size=1]
Capabilities: 
Kernel driver in use: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: 
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: 
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: 
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device 5001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Capabilities: 
Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device b005
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f0b0 [size=1]
Region 1: I/O ports at f0a0 [size=1]
Region 2: I/O ports at f090 [size=1]
Region 3: I/O ports at f080 [size=1]
Region 4: I/O ports at f060 [size=2]
Region 5: Memory at f7d16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: 
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device 5001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Interrupt: pin C routed to IRQ 11
Region 0: Memory at f7d15000 (64-bit, non-prefetchable) [disabled] [size=11]
Region 4: I/O ports at f040 [size=2]

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at e000 [size=11]
Region 2: Memory at f0104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K]
Capabilities: 
Kernel driver in use: r8169

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at d000 [size=11]
Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: 
Kernel driver in use: r8169

04:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: 
Kernel driver in use: iwlwifi

Link to post
Share on other sites

No, I haven't. I do not even know this option. :smile: I'll try it later when I learn what does this option mean. Anyway I do not had such a problem on 4.3 with trantor's hba build.

It might be related to cpu_idle driver that I backported from kernel.org. Try it and let me know if it helps :grin:

During previous test session I obtained that error with irq16 in dmesg twice straight on two reboots within less than 10 minutes from dsm start. Today I tried to reproduce the situation (no changes in hardware or software) with no luck during 2 hours (with all the activities I had previously). A lot of segfaults with dsmnotify.cgi, but no crashes on irq... So as I can't reproduce the bug, I also have no ability to test sensibly the kernel option you mentioned. Sorry...

Link to post
Share on other sites

No, I haven't. I do not even know this option. :smile: I'll try it later when I learn what does this option mean. Anyway I do not had such a problem on 4.3 with trantor's hba build.

It might be related to cpu_idle driver that I backported from kernel.org. Try it and let me know if it helps :grin:

During previous test session I obtained that error with irq16 in dmesg twice straight on two reboots within less than 10 minutes from dsm start. Today I tried to reproduce the situation (no changes in hardware or software) with no luck during 2 hours (with all the activities I had previously). A lot of segfaults with dsmnotify.cgi, but no crashes on irq... So as I can't reproduce the bug, I also have no ability to test sensibly the kernel option you mentioned. Sorry...

Three hours of run-time, no activity for the last hour at all. dmesg output:

[spoiler=][ 7175.109848] dsmnotify.cgi[3916]: segfault at 0 ip 000000000804ccb8 sp 00000000fff006a0 error 6

[ 7205.289947] dsmnotify.cgi[4066]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8724c0 error 6

[ 7235.774105] dsmnotify.cgi[4142]: segfault at 0 ip 000000000804ccb8 sp 00000000fff986b0 error 6

[11292.139798] irq 16: nobody cared (try booting with the "irqpoll" option)

[11292.139802] Pid: 0, comm: swapper/0 Tainted: P O 3.2.40 #6

[11292.139805] Call Trace:

[11292.139807] [] ? add_interrupt_randomness+0x39/0x157

[11292.139819] [] ? __report_bad_irq+0x2c/0xb4

[11292.139823] [] ? note_interrupt+0x15d/0x1b7

[11292.139828] [] ? handle_irq_event_percpu+0xfa/0x117

[11292.139831] [] ? handle_irq_event+0x48/0x70

[11292.139836] [] ? handle_fasteoi_irq+0x74/0xae

[11292.139840] [] ? handle_irq+0x87/0x90

[11292.139843] [] ? do_IRQ+0x48/0x9f

[11292.139848] [] ? common_interrupt+0x6e/0x6e

[11292.139850] [] ? lapic_next_event+0x10/0x15

[11292.139858] [] ? IO_APIC_get_PCI_irq_vector+0x1c7/0x1c7

[11292.139863] [] ? intel_idle+0xd6/0x10c

[11292.139866] [] ? intel_idle+0xb6/0x10c

[11292.139871] [] ? cpuidle_idle_call+0x6d/0xb4

[11292.139874] [] ? cpu_idle+0x60/0x8c

[11292.139880] [] ? start_kernel+0x327/0x333

[11292.139884] [] ? early_idt_handlers+0x140/0x140

[11292.139889] [] ? x86_64_start_kernel+0x10b/0x118

[11292.139891] handlers:

[11292.139907] [] usb_hcd_irq

[11292.139909] Disabling IRQ #16

 

So again - it is real, but I have no idea how to test it.

Link to post
Share on other sites

Hello,

 

I have downloaded your image (it is really impressive because the pat from Synology works immediately ), and I have some problems

there is no ACL on windows (right click on a file / directory and Properties there is ne Security page).

You say do do that

Try to insmod GRUB option synoacl_ext4.ko and synoacl_vfs.ko in 10.4.

I have made a insmod in a putty session but is not working.

I don't understand the method you recommend

 

kernel /zImage insmod=vmxnet3

# cat > /etc/rc.local << EOF

#!/bin/sh

source /etc/rc.subr

source /.gnoboot/modules.d/99-install.conf

source /.gnoboot/modules.d/05-media.conf

source /.gnoboot/modules.d/04-virt.conf

source /.gnoboot/modules.d/03-wifi.conf

SYNOLoadModules \$MEDIA_MOD

SYNOLoadModules \$VMWARE

SYNOLoadModules \$HYPERV

EOF

# chmod 755 /etc/rc.local

 

What must I do ?

I add a line (before the EOF) with the insmod ?

Doing the insmod directly doesn't work.

 

 

Also is it possible to mount a ISCSI target from another computer with your image ?

For example I create a ISCSI share from my own server and I mount it as normal drive for the GNOBoot?

 

Also I can't manage to apply the last update from synology (I downlaoded the last file and installed normally but there is a Update1 file that can only be applied from inside the DSM).

 

Thank you for your time

(I have clicked on every banner I was able to find on your web site).

 

Marc

Link to post
Share on other sites

Hi gnoBoot,

I updated from Trantor DSM 4.3 build 3810++ (repack v1.0) to 5.0 (stock DS3612xs 4458 .pat from Synologu) and all went smooth: I had made ​​a backup of the configuration and I reload it after migration...I've only had to reapply the permissions to the folders, but this has also happened the last time when I go from 4.2 to 4.3.

I applied also the update1 without problems.

Everything seems to work correctly... esxi 5.5 nfs and iscsi (file level), integration with AD, timebackup from another Synology 4.2, etc.

So... great work!!! :grin:

 

My system: ASROCK B75 PRO3-M, 2x4 Gb ddr3 Dual Channel 1600 Mhz CL9, 8 x WD2000FYYZ 2TB, Core i3-3220 (Ivy Bridge) @3,30 Ghz, 1 x Intel® PRO/1000 PT Quad Port

 

Thanks!

ema

Link to post
Share on other sites

I've been testing gnoBoot for some time now and want to say thanks for all your effort. I've had a lot of success thus far.

 

One thing that I am unsure of is what is the proper way to upgrade to the newest alpha? Do I just copy the latest zImage and overwrite the old one? Is there anything more to it than that? Sorry if this is a "newb" question, but an answer would be greatly appreciated.

 

Thanks!

Link to post
Share on other sites
I've been testing gnoBoot for some time now and want to say thanks for all your effort. I've had a lot of success thus far.

 

One thing that I am unsure of is what is the proper way to upgrade to the newest alpha? Do I just copy the latest zImage and overwrite the old one? Is there anything more to it than that? Sorry if this is a "newb" question, but an answer would be greatly appreciated.

 

Thanks!

 

For each release I make a new vmdk (I'm using esxi), and just swap them out. On first but it updates whatever new kernel changes there are.

Link to post
Share on other sites

Anyone have this stuff going on at the end of thier dmesg?

 

[  272.026464] dsmnotify.cgi[18597]: segfault at 0 ip 000000000804ccb8 sp 00000000fffd2970 error 6
[  272.074134] storagehandler.[18598]: segfault at 0 ip 000000000809e298 sp 00000000ff96e2e0 error 6
[  280.920198] dsmnotify.cgi[18861]: segfault at 0 ip 000000000804ccb8 sp 00000000fff69c50 error 6
[  280.935442] dsmnotify.cgi[18862]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe36a10 error 6
[  281.046709] dsmnotify.cgi[18864]: segfault at 0 ip 000000000804ccb8 sp 00000000ff81b720 error 6
[  311.439705] dsmnotify.cgi[18940]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9810f0 error 6
[  341.979578] dsmnotify.cgi[19070]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa52e20 error 6
[  372.845913] dsmnotify.cgi[19121]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb052b0 error 6
[  403.800579] dsmnotify.cgi[19235]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb33260 error 6
[  435.754667] dsmnotify.cgi[19290]: segfault at 0 ip 000000000804ccb8 sp 00000000ffab1590 error 6
[  467.728926] dsmnotify.cgi[19423]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb5e750 error 6
[  498.675152] dsmnotify.cgi[19462]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8146c0 error 6
[  531.624708] dsmnotify.cgi[19595]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9f9d20 error 6
[  563.602589] dsmnotify.cgi[19643]: segfault at 0 ip 000000000804ccb8 sp 00000000ff921900 error 6
[  595.548976] dsmnotify.cgi[19767]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc42230 error 6
[  627.502107] dsmnotify.cgi[19828]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9d0970 error 6
[  659.214933] dsmnotify.cgi[19966]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa40ff0 error 6
[  689.989727] dsmnotify.cgi[20050]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc3f590 error 6
[  720.084700] dsmnotify.cgi[20185]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8eece0 error 6
[  750.743911] dsmnotify.cgi[20275]: segfault at 0 ip 000000000804ccb8 sp 00000000ff80eb20 error 6
[  781.235727] dsmnotify.cgi[20414]: segfault at 0 ip 000000000804ccb8 sp 00000000ff87e3a0 error 6

 

Whatever the issue is, it's an ongoing thing... more entries over time. And it writes to associated files in /volume1/ each time... so it causes lots of writes.

 

I'm on gnoboot 10.4, in esxi 5.5, using LSI 9201-8i in passthrough (VTd) w/ 4x 3TB WD REDs. I've seen it with virtual disks, w/ no HBA or passthrough as well.

Link to post
Share on other sites
Hi all, I'm back :grin:

 

gnoboot, great work as usual. Using your latest image with the 5.0-4458 release, it's working fine so far. Only issue I have is that there's no sit0 support, and I can't initiate a tunnel through Hurricane Electric :/

 

Is there any chance that you could compile it into the next release?

You have to load ipv6 module, just google for it :smile:

 

Hello,

 

I have downloaded your image (it is really impressive because the pat from Synology works immediately ), and I have some problems

there is no ACL on windows (right click on a file / directory and Properties there is ne Security page).

You say do do that

Try to insmod GRUB option synoacl_ext4.ko and synoacl_vfs.ko in 10.4.

I have made a insmod in a putty session but is not working.

I don't understand the method you recommend

 

kernel /zImage insmod=vmxnet3 <- GRUB option before you boot to DSM.

# cat > /etc/rc.local << EOF

#!/bin/sh

source /etc/rc.subr

source /.gnoboot/modules.d/99-install.conf

source /.gnoboot/modules.d/05-media.conf

source /.gnoboot/modules.d/04-virt.conf

source /.gnoboot/modules.d/03-wifi.conf

SYNOLoadModules \$MEDIA_MOD

SYNOLoadModules \$VMWARE

SYNOLoadModules \$HYPERV

EOF

# chmod 755 /etc/rc.local <- Run this command and lines above in your putty session.

 

What must I do ?

I add a line (before the EOF) with the insmod ?

Doing the insmod directly doesn't work. <- If you are loading drivers from putty session. You command should be `insmod /lib/modules/synoacl*.ko`.

 

 

Also is it possible to mount a ISCSI target from another computer with your image ?

For example I create a ISCSI share from my own server and I mount it as normal drive for the GNOBoot? <- YES

 

Also I can't manage to apply the last update from synology (I downlaoded the last file and installed normally but there is a Update1 file that can only be applied from inside the DSM). <- Please read the forums.

 

Thank you for your time

(I have clicked on every banner I was able to find on your web site).

 

Marc

 

Whatever the issue is, it's an ongoing thing... more entries over time. And it writes to associated files in /volume1/ each time... so it causes lots of writes.

You are right, it writes to /volume1 and might fill up your disk. Just move the core files to another directory such as /tmp or /dev/null, http://justlearningtoblog.wordpress.com/2010/07/23/enable-core-dump-files-in-fedora/

 

Add this line to your /etc/rc.local.

 

sysctl -w kernel.core_pattern=/tmp/core.%p

Link to post
Share on other sites

 

Whatever the issue is, it's an ongoing thing... more entries over time. And it writes to associated files in /volume1/ each time... so it causes lots of writes.

You are right, it writes to /volume1 and might fill up your disk. Just move the core files to another directory such as /tmp or /dev/null, http://justlearningtoblog.wordpress.com/2010/07/23/enable-core-dump-files-in-fedora/

 

Add this line to your /etc/rc.local.

 

sysctl -w kernel.core_pattern=/tmp/core.%p

 

 

Thanks for the tip. I set it to null, I don't want unnecessary writes. I removed old files and now none get created :smile:

Link to post
Share on other sites

Hello,

 

I managed to apply the update using the following method

 

Download the update (but do not apply)

is a SSH :

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1
mv /autoupd@te.info1 /autoupd@te.info

 

 

 

Go back to the DSM Gui and click the Update button.

 

 

For the insmod :

I boot normally (no change in grub) and then I open a putty session and when I do the following command

insmod /lib/modules/synoacl*.ko

I receive the error

insmod: can't insert '/lib/modules/synoacl_ext4.ko': unknown symbol in module, or unknown parameter

 

 

For the ISCSI, I am looking for a guide (I will try http://www.cyberciti.biz/faq/howto-setu ... initiator/)

as open iscsi is already installed and post if it is working (or not working).

 

Thank you

Marc

Link to post
Share on other sites
@Gnoboot

Hello Gnoboot,

i have made a output file with ubuntu just like you asked.

i hope you can help me with the intel centrino n-2230 wifi card.

thanks for your time.

gr marc

 

04:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: 
Kernel driver in use: iwlwifi

 

Wireless driver is already included, just load it using /etc/rc.local method.

 

For the insmod :

I boot normally (no change in grub) and then I open a putty session and when I do the following command

 

I receive the error

insmod: can't insert '/lib/modules/synoacl_ext4.ko': unknown symbol in module, or unknown parameter

My bad, it doesn't work. Load the modules individually (i.e. insmod /lib/modules/synoacl_ext4.ko).

Link to post
Share on other sites
[11292.139798] irq 16: nobody cared (try booting with the "irqpoll" option)

 

Edit GRUB add irqpoll, you can also isolate the issue by disabling unused USB ports.

kernel /zImage irqpoll

 

EDIT: traceback happens to your i5 machine, right? Send your `lspci -vvv` result to me:) This patch (c12aba5aa0e60b7947bc8b6ea25ef55c4acf81a4) might fix it.

Checked with irqpoll boot parameter. 15 hours of runtime. No problem with irq 16 in dmesg. So it shall be the problem you imply.

Link to post
Share on other sites

Checked with irqpoll boot parameter. 15 hours of runtime. No problem with irq 16 in dmesg. So it shall be the problem you imply.

 

Let me know if ever you still get kernel traceback. So I can include the patch for 10.5. :wink:

Link to post
Share on other sites

@Gnoboot

this is what i have and get when i ran it.

#!/bin/sh

source /etc/rc.subr

source /.gnoboot/modules.d/99-install.conf

source /.gnoboot/modules.d/05-media.conf

source /.gnoboot/modules.d/04-virt.conf

source /.gnoboot/modules.d/03-wifi.conf

SYNOLoadModules \$MEDIA_MOD

ysctl -w kernel.core_pattern=/tmp/core.%p

EOF

 

Synology2> insmod /lib/modules/iwlwifi.ko

insmod: can't insert '/lib/modules/iwlwifi.ko': unknown symbol in module, or unknown parameter

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.