Recommended Posts

im having this strange problem since updating to 5.0 from the beta...

 

I always had UPNP enabled in my router, but since the update this function criples my lan.. Every once in a while the network hangs for 2s, if i dissconnect the xpenology-box or disable upnp in the router everything is fine and as soon as i put it back on with upnp enabled in router the lan acts up...

I have tried with a different cable but thats not it.

 

Anyone got a clue on this?

Link to post
Share on other sites

QUESTION: Can't synodisk be patched to work like smartctl does?

 

Anything related to DSM, won't fix. It's closed source.

 

Update on XenServer Paravirtualization

 

I tried to run gnoboot using XenServer PV (pygrub), however getting error in Xen console when starting VM:

Internal error: xenopsd internal error: XenguestHelper.Xenctrl_dom_linux_build_failure(2, " panic: xc_dom_core.c:616: xc_dom_find_loader: no loader\\\"")

 

Which i found is result of XenServer having pygrub compiled WITHOUT LZMA/XS support for kernel compression (which holds for last XenServer release http://discussions.citrix.com/topic/330 ... z-support/)

 

gnoBoot what compression are you using? (I could not find it using `file zImage`)

 

Anyway in XenServer 6.2.5 (beta) LZMA/XS is supported so if that is reason why it is not working then i would wait for XenServer 6.2.5 stable release (https://xen-orchestra.com/testing-xenserver-6-2-5-beta/).

 

Thanks

 

I'm using LZMA, will switch to GZIP next release.

 

im having this strange problem since updating to 5.0 from the beta...

 

I always had UPNP enabled in my router, but since the update this function criples my lan.. Every once in a while the network hangs for 2s, if i dissconnect the xpenology-box or disable upnp in the router everything is fine and as soon as i put it back on with upnp enabled in router the lan acts up...

I have tried with a different cable but thats not it.

 

Anyone got a clue on this?

 

/etc/rc.network is very different from 5.0-4418 to 5.0-4458 that might be the problem. Trying replacing the file using older version.

Link to post
Share on other sites

I'm running gnoboot 10.3 on bare hardware and having horrible transfer speeds, the motherboard I'm using has a quad i210 nic on board with the latest version of xeon cpu and 16gb ram, 8 3tb WD Red, as suggested I tried removing the e1000 module, i did this by ssh into the box and trying rmmod e1000.ko however i get the following error

 

rmmod: can't unload 'e1000': unknown symbol in module, or unknown parameter

 

any suggestions?

 

thanks

Link to post
Share on other sites

 

/etc/rc.network is very different from 5.0-4418 to 5.0-4458 that might be the problem. Trying replacing the file using older version.

 

I disabled local master browser (had no others on the lan) and mac file service wich seems to have solved the problem, had both these on in the beta without any problem...

Link to post
Share on other sites
I'm running gnoboot 10.3 on bare hardware and having horrible transfer speeds, the motherboard I'm using has a quad i210 nic on board with the latest version of xeon cpu and 16gb ram, 8 3tb WD Red, as suggested I tried removing the e1000 module, i did this by ssh into the box and trying rmmod e1000.ko however i get the following error

 

rmmod: can't unload 'e1000': unknown symbol in module, or unknown parameter

 

any suggestions?

 

thanks

I'm still waiting for the next IGB driver release. I can't compile the latest version because of BUG#396.

Link to post
Share on other sites

Hi gnoboot,

 

I would like to install my Contex DTV-01 USB for TV recording on my HP N54L (gnoboot alpha 10.3 + DSM 5.0 4458), but the below error message has been shown...

[  253.793103] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[  254.300612] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state.
[  254.641437] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  254.641628] DVB: registering new adapter (Conexant DMB-TH Stick)
[  256.852364] usb 1-3: DVB: registering adapter 0 frontend 0 (Legend Silicon LGS8913/LGS8GXX DMB-TH)...
[  256.852605] MXL5005S: Attached at address 0x63
[  256.853050] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-3/input/input4
[  256.853057] dvb-usb: schedule remote query interval to 100 msecs.
[  256.853098] ------------[ cut here ]------------
[  256.853139] kernel BUG at kernel/workqueue.c:570!
[  256.853177] invalid opcode: 0000 [#1] SMP 
[  256.853278] CPU 0 
[  256.853312] Modules linked in: dvb_usb_cxusb(O+) mxl5005s(O) lgs8gxx(O) atbm8830(O) mt352(O) lgdt330x(O) tuner_simple(O) tuner_types(O) tuner_xc2028(O) dvb_pll(O) max2165(O) zl10353(O) cx22702(O) dvb_usb(O) rc_core(O) dib0070(O) dib7000p(O) dibx000_common(O) dvb_core(O) cifs udf isofs loop usbhid hid usblp usb_storage uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) btrfs zlib_deflate hfsplus md4 hmac i2c_algo_bit fuse vfat fat chainiv cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor cpufreq_stats freq_table dm_snapshot crc_itu_t quota_v2 quota_tree usbcore psnap p8022 llc usb_common vmxnet3 synoacl_ext4(P) synoacl_vfs(P) hptiop 3w_sas 3w_9xxx 3w_xxxx mv61xx(P) mvsas hpsa arcmsr aic7xxx aic79xx aic94xx aacraid megaraid_sas megaraid_mbox megaraid_mm mpt2sas mptsas mptspi mptscsih mptbase scsi_transport_spi scsi_wait_scan sg ata_piix sata_uli sata_svw sata_qstor sata_inic162x sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pata_serverworks pata_atiixp pata_amd pata_oldpiix pata_sch pata_artop pata_atp867x pata_pdc202xx_old pata_pdc2027x pata_it821x pata_hpt3x2n pata_hpt37x pata_hpt366 pata_hpt3x3 pdc_adma pata_via pata_sil680 pata_rdc pata_ninja32 pata_netcell pata_marvell pata_jmicron pata_cmd64x pata_ali pata_acpi ata_generic iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic mlx4_en mlx4_core cxgb4vf cxgb4 cxgb3 cxgb cnic ipv6 bnx2x bna be2net sis900 sis190 jme atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8169(O) r8168(O) 8139too 8139cp tg3(O) libphy b44(O) bnx2 mmc_core ssb uio forcedeth ixgbe ixgb igb_new(O) ioatdma e1000e_new(O) e1000 e100 dca pcnet32 amd8111e tulip mdio mii container fan thermal_sys compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi [last unloaded: bromolow_synobios]
[  256.854008] 
[  256.854008] Pid: 27240, comm: insmod Tainted: P         C O 3.2.40 #1 HP ProLiant MicroServer
[  256.854008] RIP: 0010:[]  [] get_work_gcwq+0x28/0x32
[  256.854008] RSP: 0018:ffff8802173cbb60  EFLAGS: 00010287
[  256.854008] RAX: 0000000000000000 RBX: ffff8802141765e0 RCX: 0000000000000064
[  256.854008] RDX: 0000000000000000 RSI: ffff88021e808140 RDI: 0000000000000009
[  256.854008] RBP: ffff88021e808140 R08: 000000000000d3a7 R09: ffffffff815390f7
[  256.854008] R10: 0000000000000000 R11: 0000000000000003 R12: ffff880214176600
[  256.854008] R13: 00000000ffffffff R14: 0000000000000064 R15: 0000000000000001
[  256.854008] FS:  00000000006fc880(0000) GS:ffff88021fc00000(0063) knlGS:00000000f75a0b40
[  256.854008] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[  256.854008] CR2: 00000000082b81e0 CR3: 000000021492b000 CR4: 00000000000006f0
[  256.854008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  256.854008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  256.854008] Process insmod (pid: 27240, threadinfo ffff8802173ca000, task ffff880214fd8eb0)
[  256.854008] Stack:
[  256.854008]  ffffffff8104f060 0000000000000064 ffff880214174000 0000000000000000
[  256.854008]  0000000000000023 ffff880214174000 ffffffffa0410093 0000000000000000
[  256.854008]  ffff880214175130 ffff880214175298 0000000000000001 ffff880214174a30
[  256.854008] Call Trace:
[  256.854008]  [] ? queue_delayed_work_on+0x8f/0xfe
[  256.854008]  [] ? dvb_usb_remote_init+0x273/0x440 [dvb_usb]
[  256.854008]  [] ? dvb_usb_device_init+0x62f/0x700 [dvb_usb]
[  256.854008]  [] ? cxusb_probe+0x1a2/0x1e0 [dvb_usb_cxusb]
[  256.854008]  [] ? usb_probe_interface+0xbf/0xfa [usbcore]
[  256.854008]  [] ? driver_probe_device+0x99/0x11c
[  256.854008]  [] ? driver_probe_device+0x11c/0x11c
[  256.854008]  [] ? __driver_attach+0x45/0x61
[  256.854008]  [] ? bus_for_each_dev+0x43/0x75
[  256.854008]  [] ? bus_add_driver+0xb2/0x201
[  256.854008]  [] ? driver_register+0x95/0x101
[  256.854008]  [] ? usb_register_driver+0x7e/0x121 [usbcore]
[  256.854008]  [] ? 0xffffffffa05bffff
[  256.854008]  [] ? do_one_initcall+0x79/0x132
[  256.854008]  [] ? sys_init_module+0x105c/0x1201
[  256.854008]  [] ? dput+0xdd/0xfe
[  256.854008]  [] ? cstar_dispatch+0x7/0x32
[  256.854008] Code: 08 eb be 48 8b 07 a8 04 74 06 30 c0 48 8b 00 c3 48 89 c7 31 c0 48 c1 ef 08 83 ff 11 74 16 3b 3d ca e8 5f 00 72 09 83 ff 10 74 04 <0f> 0b eb fe e9 59 fd ff ff c3 e8 c9 ff ff ff 48 85 c0 ba 11 00 
[  256.854008] RIP  [] get_work_gcwq+0x28/0x32
[  256.854008]  RSP 
[  256.864674] ---[ end trace 4cefa1e62067a3e2 ]---

lsmod.

Module                  Size  Used by    Tainted: P  
dvb_usb_cxusb          70639  1 
mxl5005s               36976  1 dvb_usb_cxusb
lgs8gxx                12026  1 dvb_usb_cxusb
atbm8830                6633  1 dvb_usb_cxusb
mt352                   6244  1 dvb_usb_cxusb
lgdt330x                8618  1 dvb_usb_cxusb
tuner_simple           14480  1 dvb_usb_cxusb
tuner_types            19453  1 tuner_simple
tuner_xc2028           21113  1 dvb_usb_cxusb
dvb_pll                11055  1 dvb_usb_cxusb
max2165                 5992  1 dvb_usb_cxusb
zl10353                 7141  1 dvb_usb_cxusb
cx22702                 5522  1 dvb_usb_cxusb
dvb_usb                20086  1 dvb_usb_cxusb
rc_core                14795  1 dvb_usb
dib0070                 8661  1 dvb_usb_cxusb
dib7000p               29421  1 dvb_usb_cxusb
dibx000_common          7575  1 dib7000p
dvb_core               94675  3 lgdt330x,dvb_usb,dib7000p
cifs                  220445  0 
udf                    67659  0 
isofs                  28854  0 
loop                   15123  0 
usbhid                 23310  0 
hid                    44680  1 usbhid
usblp                  10616  0 
usb_storage            46747  0 
uhci_hcd               19576  0 
etxhci_hcd             67510  0 
xhci_hcd               69082  0 
ohci_hcd               18671  0 
ehci_hcd               34785  0 
bromolow_synobios      33535  0 
btrfs                 474209  0 
zlib_deflate           18625  1 btrfs
hfsplus                81886  0 
md4                     3016  0 
hmac                    2791  0 
i2c_algo_bit            4526  0 
fuse                   60252  0 
vfat                    8327  0 
fat                    44178  1 vfat
chainiv                 2954  0 
cpufreq_conservative     5046  0 
cpufreq_powersave        882  0 
cpufreq_performance      888  0 
cpufreq_ondemand        5763  0 
mperf                   1247  0 
processor              28130  0 
cpufreq_stats           3152  0 
freq_table              3039  2 cpufreq_ondemand,cpufreq_stats
dm_snapshot            26176  0 
crc_itu_t               1453  1 udf
quota_v2                3794  2 
quota_tree              7334  1 quota_v2
usbcore               158988 11 dvb_usb_cxusb,dvb_usb,usbhid,usblp,usb_storage,uhci_hcd,etxhci_hcd,xhci_hcd,ohci_hcd,ehci_hcd
psnap                   2059  0 
p8022                   1161  0 
llc                     4518  2 psnap,p8022
usb_common               938  1 usbcore
vmxnet3                31983  0 
synoacl_ext4           13321  3 
synoacl_vfs             5103  3 
hptiop                 11688  0 
3w_sas                 19147  0 
3w_9xxx                30028  0 
3w_xxxx                21677  0 
mv61xx                 74473  0 
mvsas                  42188  0 
hpsa                   38977  0 
arcmsr                 24915  0 
aic7xxx               106332  0 
aic79xx               122165  0 
aic94xx                62657  0 
aacraid                67635  0 
megaraid_sas           62338  0 
megaraid_mbox          24607  0 
megaraid_mm             7388  1 megaraid_mbox
mpt2sas               150666  0 
mptsas                 43587  0 
mptspi                 13917  0 
mptscsih               27214  2 mptsas,mptspi
mptbase                77746  3 mptsas,mptspi,mptscsih
scsi_transport_spi     18556  3 aic7xxx,aic79xx,mptspi
scsi_wait_scan           661  0 
sg                     22358  0 
ata_piix               23000  0 
sata_uli                3183  0 
sata_svw                4464  0 
sata_qstor              5209  0 
sata_inic162x           6998  0 
sata_sis                3989  0 
pata_sis               11981  1 sata_sis
stex                   13583  0 
sata_sx4                8129  0 
sata_promise           10100  0 
sata_nv                19611  0 
sata_via                8313  0 
sata_sil                7948  0 
pata_serverworks        5662  0 
pata_atiixp             4276  0 
pata_amd               10858  0 
pata_oldpiix            3470  0 
pata_sch                2745  0 
pata_artop              5337  0 
pata_atp867x            4984  0 
pata_pdc202xx_old       4801  0 
pata_pdc2027x           6497  0 
pata_it821x             9134  0 
pata_hpt3x2n            5939  0 
pata_hpt37x            12101  0 
pata_hpt366             5455  0 
pata_hpt3x3             3425  0 
pdc_adma                5425  0 
pata_via                9236  0 
pata_sil680             5206  0 
pata_rdc                4500  0 
pata_ninja32            3094  0 
pata_netcell            2372  0 
pata_marvell            3089  0 
pata_jmicron            2577  0 
pata_cmd64x             6383  0 
pata_ali                9807  0 
pata_acpi               3163  0 
ata_generic             3694  0 
iscsi_tcp               8593  0 
libiscsi_tcp           12578  1 iscsi_tcp
libiscsi               35722  2 iscsi_tcp,libiscsi_tcp
enic                   46142  0 
qlge                   68376  0 
qlcnic                100943  0 
qla3xxx                28926  0 
netxen_nic             78324  0 
mlx4_en                43845  0 
mlx4_core              84914  1 mlx4_en
cxgb4vf                41998  0 
cxgb4                  81895  0 
cxgb3                 123820  0 
cxgb                   60466  0 
cnic                   41094  0 
ipv6                  250211 50 cnic
bnx2x                 398572  0 
bna                    99588  0 
be2net                 56533  0 
sis900                 17654  0 
sis190                 15442  0 
jme                    25926  0 
atl1e                  27382  0 
atl1c                  27716  0 
atl2                   22399  0 
atl1                   26988  0 
alx                    21780  0 
sky2                   43527  0 
skge                   34186  0 
via_velocity           28447  0 
crc_ccitt               1453  1 via_velocity
via_rhine              20577  0 
r8169                  26838  0 
r8168                 245234  0 
8139too                17811  0 
8139cp                 16565  0 
tg3                   147336  0 
libphy                 18014  0 
b44                    22596  0 
bnx2                   62996  0 
mmc_core               68817  0 
ssb                    33059  1 b44
uio                     8124  1 cnic
forcedeth              47296  0 
ixgbe                 116651  0 
ixgb                   37775  0 
igb_new               156974  0 
ioatdma                35509  0 
e1000e_new            186813  0 
e1000                  88919  0 
e100                   25371  0 
dca                     5755  3 ixgbe,igb_new,ioatdma
pcnet32                27448  0 
amd8111e               16385  0 
tulip                  44012  0 
mdio                    3699  5 cxgb3,cxgb,bnx2x,alx,ixgbe
mii                     4102 11 sis900,sis190,jme,atl1,via_rhine,8139too,8139cp,b44,e100,pcnet32,amd8111e
container               2398  0 
fan                     2359  0 
thermal_sys            14343  2 processor,fan
compat                 17647  5 atl1e,atl2,atl1,alx,b44
cryptd                  7859  0 
ecryptfs               85626  0 
sha512_generic          4708  0 
sha256_generic          8662  0 
sha1_generic            1952  0 
ecb                     1815  0 
aes_x86_64              7565  0 
authenc                 5941  0 
des_generic            15895  0 
libcrc32c               1003  2 btrfs,bnx2x
crc32c                  2597  1 
eseqiv                  2442  0 
krng                    1088  0 
ansi_cprng              3487  0 
cts                     3577  0 
rng                     2354  4 chainiv,eseqiv,krng,ansi_cprng
aes_generic            26402  1 aes_x86_64
md5                     1704  0 
cbc                     2481  0 
cryptomgr               2323  0 
pcompress               1683  0 
aead                    5852  3 cryptd,authenc,cryptomgr
crypto_hash            13298 11 cifs,md4,hmac,cryptd,sha512_generic,sha256_generic,sha1_generic,authenc,libcrc32c,crc32c,md5
crypto_blkcipher       13075  8 chainiv,cryptd,ecryptfs,ecb,authenc,eseqiv,cts,cbc
crypto_wq                842  2 chainiv,cryptd
crypto_algapi          14107 18 hmac,chainiv,cryptd,ecb,aes_x86_64,authenc,des_generic,eseqiv,krng,ansi_cprng,cts,aes_generic,cbc,cryptomgr,pcompress,aead,crypto_hash,crypto_blkcipher

lspci -v

00:00.0 Class 0600: Device 1022:9601
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c

00:01.0 Class 0604: Device 103c:9602
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe700000-fe8fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: Device 103c:1609

00:06.0 Class 0604: Device 1022:9606
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: Device 103c:1609
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110] Virtual Channel
Kernel driver in use: pcieport

00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01)
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 41
I/O ports at d000 [size=1]
I/O ports at c000 [size=1]
I/O ports at b000 [size=1]
I/O ports at a000 [size=1]
I/O ports at 9000 [size=1]
Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
Capabilities: [70] SATA HBA v1.0
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: ahci

00:12.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe6ff800 (32-bit, non-prefetchable) [size=11]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:13.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe6ff400 (32-bit, non-prefetchable) [size=11]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:14.0 Class 0c05: Device 1002:4385 (rev 42)
Flags: 66MHz, medium devsel

00:14.3 Class 0601: Device 1002:439d (rev 40)
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01)
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64

00:16.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:16.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 103c:1609
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe6ff000 (32-bit, non-prefetchable) [size=11]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:18.0 Class 0600: Device 1022:1200
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Class 0600: Device 1022:1201
Flags: fast devsel

00:18.2 Class 0600: Device 1022:1202
Flags: fast devsel

00:18.3 Class 0600: Device 1022:1203
Flags: fast devsel
Capabilities: [f0] Secure device <?>

00:18.4 Class 0600: Device 1022:1204
Flags: fast devsel

01:05.0 Class 0300: Device 1002:9712
Subsystem: Device 103c:1609
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at e000 [size=11]
Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at  [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+

02:00.0 Class 0200: Device 14e4:165b (rev 10)
Subsystem: Device 103c:705d
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Capabilities: [40] Vital Product Data
Capabilities: [60] Vendor Specific Information: Len=6c <?>
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [cc] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
Capabilities: [160] Device Serial Number 38-ea-a7-ff-fe-a6-02-c9
Capabilities: [16c] Power Budgeting <?>
Kernel driver in use: tg3

lspci -vvv

00:00.0 Class 0600: Device 1022:9601
Subsystem: Device 103c:1609
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
	Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
	Link Control 0: CFlE- CST- CFE- 		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
	Link Control 1: CFlE- CST- CFE- 		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
	Revision ID: 3.00
	Link Frequency 0: 1.6GHz
	Link Error 0: 		Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
	Link Frequency 1: 200MHz
	Link Error 1: 		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
	Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
	Prefetchable memory behind bridge Upper: 00-00
	Bus Number: 00
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c

00:01.0 Class 0604: Device 103c:9602
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe700000-fe8fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- 	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: Device 103c:1609

00:06.0 Class 0604: Device 1022:9606
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
	DevCap:	MaxPayload 128 bytes, PhantFunc 0
		ExtTag+ RBE+
	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		MaxPayload 128 bytes, MaxReadReq 128 bytes
	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
	LnkCap:	Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
		ClockPM- Surprise- LLActRep+ BwNot+
	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
	LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
	RootCap: CRSVisible-
	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
	DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
	LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
		 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
		 Compliance De-emphasis: -6dB
	LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
		 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Address: fee0300c  Data: 4149
Capabilities: [b0] Subsystem: Device 103c:1609
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110 v1] Virtual Channel
	Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
	Arb:	Fixed- WRR32- WRR64- WRR128-
	Ctrl:	ArbSelect=Fixed
	Status:	InProgress-
	VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
		Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
		Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
		Status:	NegoPending- InProgress-
Kernel driver in use: pcieport

00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01)
Subsystem: Device 103c:1609
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at d000 [size=1]
Region 1: I/O ports at c000 [size=1]
Region 2: I/O ports at b000 [size=1]
Region 3: I/O ports at a000 [size=1]
Region 4: I/O ports at 9000 [size=1]
Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
	Address: 00000000fee0100c  Data: 4159
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Capabilities: [a4] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-
Kernel driver in use: ahci

00:12.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 103c:1609
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 103c:1609
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=11]
Capabilities: [c0] Power Management version 2
	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:13.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 103c:1609
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 103c:1609
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=11]
Capabilities: [c0] Power Management version 2
	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:14.0 Class 0c05: Device 1002:4385 (rev 42)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 
00:14.3 Class 0601: Device 1002:439d (rev 40)
Subsystem: Device 103c:1609
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0

00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:16.0 Class 0c03: Device 1002:4397 (prog-if 10)
Subsystem: Device 103c:1609
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:16.2 Class 0c03: Device 1002:4396 (prog-if 20)
Subsystem: Device 103c:1609
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=11]
Capabilities: [c0] Power Management version 2
	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd

00:18.0 Class 0600: Device 1022:1200
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Capabilities: [80] HyperTransport: Host or Secondary Interface
	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 		Link Control: CFlE- CST- CFE- 		Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
	Revision ID: 3.00
	Link Frequency: 1.6GHz
	Link Error: 		Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
	Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Class 0600: Device 1022:1201
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
00:18.2 Class 0600: Device 1022:1202
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
00:18.3 Class 0600: Device 1022:1203
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Capabilities: [f0] Secure device <?>

00:18.4 Class 0600: Device 1022:1204
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
01:05.0 Class 0300: Device 1002:9712
Subsystem: Device 103c:1609
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at e000 [size=11]
Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at  [disabled]
Capabilities: [50] Power Management version 3
	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Address: 0000000000000000  Data: 0000

02:00.0 Class 0200: Device 14e4:165b (rev 10)
Subsystem: Device 103c:705d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
	Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [40] Vital Product Data
	Product Name: HP NC107i PCIe Gigabit Server Adapter
	Read-only fields:
		[PN] Part number: BCM95723
		[EC] Engineering changes: 106679-15
		[sN] Serial number: 0123456789
		[MN] Manufacture ID: 31 34 65 34
		[RV] Reserved: checksum good, 37 byte(s) reserved
	Read/write fields:
		[YA] Asset tag: XYZ01234567
		[RW] Read-write area: 107 byte(s) free
	End
Capabilities: [60] Vendor Specific Information: Len=6c <?>
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Address: 00000000fee0100c  Data: 4161
Capabilities: [cc] Express (v2) Endpoint, MSI 00
	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
		ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
		RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		MaxPayload 128 bytes, MaxReadReq 512 bytes
	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
	LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
		ClockPM+ Surprise- LLActRep- BwNot-
	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
	LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
	DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
	LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
		 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
		 Compliance De-emphasis: -6dB
	LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
		 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
	UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
	Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
	Arb:	Fixed- WRR32- WRR64- WRR128-
	Ctrl:	ArbSelect=Fixed
	Status:	InProgress-
	VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
		Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
		Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
		Status:	NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 38-ea-a7-ff-fe-a6-02-c9
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: tg3

By the way, I can install it by using gnoboot alpha 5 (DSM 5.0 4418 beta)...

[ 1095.876075] usb 2-1: new high-speed USB device number 3 using ehci_hcd
[ 1096.256096] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state.
[ 1096.597405] dvb-usb: will pass the complete MPEG2 transport stream to the sof                                                                                                                                                             tware demuxer.
[ 1096.597592] DVB: registering new adapter (Conexant DMB-TH Stick)
[ 1098.808315] usb 2-1: DVB: registering adapter 0 frontend 0 (Legend Silicon LG                                                                                                                                                             S8913/LGS8GXX DMB-TH)...
[ 1098.808559] MXL5005S: Attached at address 0x63
[ 1098.808997] input: IR-receiver inside an USB DVB receiver as /devices/pci0000                                                                                                                                                             :00/0000:00:13.2/usb2/2-1/input/input0
[ 1098.809026] dvb-usb: schedule remote query interval to 100 msecs.
[ 1098.809174] dvb-usb: Conexant DMB-TH Stick successfully initialized and conne                                                                                                                                                             cted.
[ 1098.809930] usbcore: registered new interface driver dvb_usb_cxusb

 

Thanks for your help!!!

Link to post
Share on other sites

Hi Hjnas,

 

I saw your post some pages earlier and would be interested to understand your whole setup:

 

Lsi 9271-8 and H710p

I just use photo station on the dsm as the front end for the mobile device. The window sever is the main storage as the back end. That is why I prefer to use cifs mount on dsm instead of NSF or ISCSI.

 

I use vmkfstools -z / -v to create the LUN for dsm instead of the raid controller passthrough.

Test env:

Gnoboot alpha 9 - dsm 4.3

Esxi 5.5

Windows 2012 r2 std

 

Does that mean, DSM is just acting as a front-end without any major HDD management?

 

I have a 2012R2 Server with VMware workstation 10 (configured as server) running gnoboot's DSM 5.0-4458. I have set up a small VMDK for direct storage, but most of the content is mounted via NFS from a NFS-Share on my Host-system 2012R2. How do you manage your access from DSM to the 2012R2? How do you use LUN?

 

Thanks upfront for your feedback - I'm searching for improvements on my installation;-)

Link to post
Share on other sites

Using gnoboot 10.3 alpha all works except push notifications. On the prior build I had installed (4.3 -3180) I used the SN of an DS713+ and push notifications worked fine. Not this time around using same SN as before.

 

System Specs:

Mother Board ASUS P6X58D Premium, Dual NIC (both work)

Processor: I7 950, 3.06Ghz

RAM: 12GB

Storage: 7 3TB seagates all connected to main board 1 port still empty and appears to work.

performance in excellent

7t9k.png

58zl.png

 

File copied from one folder on Volume 1 to another folder on Volume 1 was close to 38GB and took 6 minutes

 

LAN performance is great too, saturates 1gig network both in read and write

Link to post
Share on other sites
I'm running gnoboot 10.3 on bare hardware and having horrible transfer speeds, the motherboard I'm using has a quad i210 nic on board with the latest version of xeon cpu and 16gb ram, 8 3tb WD Red, as suggested I tried removing the e1000 module, i did this by ssh into the box and trying rmmod e1000.ko however i get the following error

 

rmmod: can't unload 'e1000': unknown symbol in module, or unknown parameter

 

any suggestions?

 

thanks

I'm still waiting for the next IGB driver release. I can't compile the latest version because of BUG#396.

 

I have an Intel gig pro that uses the 82574L chip and e1000e.ko, would disabling the on board nic and using this one bypass the igb driver issues?

 

thanks

Link to post
Share on other sites

Just use rmmod GRUB option to disable your 82574L chip.

 

kernel /zImage rmmod=e1000e_new,e1000e

 

But I think that would not even solve your problem.

 

Changelog for igb 5.1.2

* Change how driver update rx packet stats, to include additional packet types.

* Add support for freeing q_vectors via RCU.

* Change how PBA is reported when using flashless i210/i211.

* Fixes to improve load performance for flashless i210 devices.

* Add get/set_channels function for queue management via ethtool.

* Update the number of tries for copper link in Media Auto Sense feature due to behavior with no cables.

* Add function to output RSS table via ethtool. * Sync some RSS changes from upstream.

* Fix for WOL issues found on some kernel versions.

* Fix for PHY config issue found when changing PHY settings after init on some i354 platforms.

Link to post
Share on other sites

Hi gnoboot,

 

Thank you very much!! I have tried to use the gnoboot-alpha 10.4, I can install my TV usb...

 

[  548.508112] usb 2-1: new high-speed USB device number 4 using ehci_hcd
[  548.908546] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state.
[  549.249405] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  549.249602] DVB: registering new adapter (Conexant DMB-TH Stick)
[  551.459336] usb 2-1: DVB: registering adapter 0 frontend 0 (Legend Silicon LGS8913/LGS8GXX DMB-TH)...
[  551.459576] MXL5005S: Attached at address 0x63
[  551.460018] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-1/input/input4
[  551.460025] dvb-usb: schedule remote query interval to 100 msecs.
[  551.460244] dvb-usb: Conexant DMB-TH Stick successfully initialized and connected.
[  551.461146] usbcore: registered new interface driver dvb_usb_cxusb

 

BTW, I have clicked the ADs to support development. :mrgreen:

Link to post
Share on other sites
Hi Hjnas,

 

I saw your post some pages earlier and would be interested to understand your whole setup:

 

Lsi 9271-8 and H710p

I just use photo station on the dsm as the front end for the mobile device. The window sever is the main storage as the back end. That is why I prefer to use cifs mount on dsm instead of NSF or ISCSI.

 

I use vmkfstools -z / -v to create the LUN for dsm instead of the raid controller passthrough.

Test env:

Gnoboot alpha 9 - dsm 4.3

Esxi 5.5

Windows 2012 r2 std

 

Does that mean, DSM is just acting as a front-end without any major HDD management?

 

I have a 2012R2 Server with VMware workstation 10 (configured as server) running gnoboot's DSM 5.0-4458. I have set up a small VMDK for direct storage, but most of the content is mounted via NFS from a NFS-Share on my Host-system 2012R2. How do you manage your access from DSM to the 2012R2? How do you use LUN?

 

Thanks upfront for your feedback - I'm searching for improvements on my installation;-)

 

I don't prefer to use nsf on the windows environment because it requires multiple ports opening. I don't use the ISCSI on the home environment because there is not huge different on the IO.

my dsm setting, 32MB boot + 8GB dsm / single EXT4 storage (~3.5 GB useable space). The photo station created the /photo folder under dsm storage and i created the mounting point on this folder via cifs. Therefore, all the photos stores in the windows side.

Link to post
Share on other sites

Thanks for your feedback Hjnas,

 

Trying your way, I deleted all my folders and files under /photo & /music and mapped remote folders from my Server via Filestation CIFS. The structure is now:

 

/photo/Fahrzeuge

/music/Lieder

 

where Lieder and Fahrzeuge are remote folders.

 

I have reindexed after mapping remote folders, but unfortunately, Nor DS-audio finds any songs, nor DS-Photo finds any photo.

 

Do you have any idea, why it doesn't work for me?

 

Btw, I haven't installed vm-tools, as gnoboot is still working to get them running on DSM-50

Link to post
Share on other sites

Kudos to gnoBoot and Trantor for the excellent work they did !!! :grin:

I installed gnoBoot alpha 10.4 with DSM 5, and managed to get it work. Thanks to the additional drivers I have a RTL8169 card working, a bluetooth dongle as well as a Huawei 3G dongle for Asterisk.

 

There was one thing weird though, during installation, after reboot, I got a few times that Synology Assistant had a time out and was not able to end the final step in which the configuration files were written.

 

When I logged in on xpenology itself (using gnoBoot's login screen of the NAS itself) and then logged out, for some weird reason, the system was capable of finishing successfully the writing of the configuration files. I don't know why or if I did something wrong, but I'm happy I got it working :smile: .

Link to post
Share on other sites

@cooledspirit and anyone running dsm 5

 

when you say : "I installed gnoBoot alpha 10.4 with DSM 5"

 

Do you mean the beta or the release.... I'm asking because I can't seem to get 4458 release to install.

Link to post
Share on other sites

I've installed the latest beta on my N54L and all things I have tried work,

and the two things that are playing up is, if I click on "network" in My computer the N54L shows up as

"other devices" "plex server" But the main Icon(shape of a monitor) does not show up.

 

And if I try \\insert name it can't find the Nas. But I have found out that if I un-tick "Enable SMB 2 and large mtu"

it shows up until I reboot. Also I have a number 1 on the control panel(like when it has a update)

and it takes ages for the services to start up.

 

Alll android apps work great and wol is working and so is hibernation. Thanks dude for 10.4 :smile: still playing.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.