Recommended Posts

I've posted comments on your blog, and active in your thread.. but how a password will magically get to me

and another question,how does the open-vm-tools work,i've installed it in my vm-nas,but it shows me 'not working',what should i do to get it working~~~

finally ,thanks for your hard work~~

Link to post
Share on other sites

but i can't give any feedback, i've tried alpha 5, had problems, not sure if its gnoboot related or not, and i have not been able to try out alpha 9 before alpha 10 came.

i know you want feedback but some users wont be able to give feedback.

i rather don't give feedback when i feel i can't tribute to anything, then just writing down something for the ability to get the password.

 

/Best regards

Henrik

Link to post
Share on other sites

Well To do what as been asked I will give mine below. Since I was unable to get alpha9 working at all in ESXi 5.5 the only release that I was able to test was alpha 5.

 

Alpha 9: after installing it would cause a grub error. I tried everything I could and could not fix this. I spent over 6 hours and one upset girl friend and still no luck. The only way to not get the grub error was to install alpha5

 

Alpha 5: It installed fine but I could not get iSCSI to work. Windows files share worked and where very fast. Did not get to test NFS. This was using version 5 of the DSM.

 

I am hoping the alpha 10 vfat image works. I don't know if it had to do with the fact that since it was a zimage with alpha9 that I messed it up and caused the grub error after install.

 

Also for all the esxi user out there I plan on doing a write up / guide once I get a working configuration for all to go off.

Link to post
Share on other sites

The only image I have is alpha5. I still don't know how to update a zimage. If you'd like me to test alpha10 please send me a password. I've happily filled out the form but still haven't really got anywhere using alpha9 due to the zimage. I'm attempting to test baremetal gen8 microserver. I never tested alpha5 since I figured I'd update to the latest first. However, if you insist, I can test alpha5 and report back in order to get the password. While I appreciate your desire for feedback, I think simply requiring the form to be filled out before should suffice. There is no need to force people to work with you, we all support what you are doing and want you to have the greatest success. :smile:

Link to post
Share on other sites

Still very much a n00b to all this. Only discovered XPEnology a week or two ago, (boy I wish I'd found it before trying OMV), and the learning curve has been steep. Managed to get alpha7 working in ESXi on my N40L but disapointed to find it didn't like SCSI interface so DSM a no go.

 

Admit to being overly confused right now with updating the zImage. Been holding out for a complete new image to try so hopefully will be lucky enough to receive the password for alpha10.

Link to post
Share on other sites

Heya gno... can I get the password? Been testing since initial release but don't have it working with my primary systems.

 

mpt2sas driver isn't working on Dell Perc H310s flashed to LSI 9211-81 IT Firmware (run with 3 in primary system).

I have had it working once or twice on old AOC-SATA-MV8s but always crashes within a couple days (run with 3 in secondary system)

Don't have it working with AOC-SASLP-MV8s.

 

Have ~6 different systems to test on and play with.

Link to post
Share on other sites

problem on alpha9 in vb, :oops:

 

i mounted alpha7 in windows7, and then replace the zImage,

umount it, and dd into a working version of dsm in vb.

 

after reboot, it seem stop on the page ...

 

any advice for me?

i am using N40l with 9261-8i ...

593ef3b0ac98a_DSM5.png.8fdf1d3e6c8fbef259d99d620151e9c1.png

Link to post
Share on other sites

Move /lib/modules content to another directory.

 

gnoboot> mkdir /lib/modules.backup
gnoboot> mv /lib/modules/*.ko /lib/modules.backup
gnoboot> reboot

 

If it works then delete the /lib/modules.backup (i.e. rm -rf /lib/modules.backup).

Link to post
Share on other sites
problem on alpha9 in vb, :oops:

 

i mounted alpha7 in windows7, and then replace the zImage,

umount it, and dd into a working version of dsm in vb.

 

after reboot, it seem stop on the page ...

 

any advice for me?

i am using N40l with 9261-8i ...

 

i cannot get into any console/terminal :oops:

Link to post
Share on other sites
problem on alpha9 in vb, :oops:

 

i mounted alpha7 in windows7, and then replace the zImage,

umount it, and dd into a working version of dsm in vb.

 

after reboot, it seem stop on the page ...

 

any advice for me?

i am using N40l with 9261-8i ...

 

i cannot get into any console/terminal :oops:

 

i dd the alpha7.img , it work againt ...

and then replace the zImage from alpha8, it boot-up to "DiskStation>",

i could login in vb console, however, Cannot going in by the "192.xx.xx.xx:5000" ...

 

any difference between alpha7 and alpha8? only more drivers?

Link to post
Share on other sites
problem on alpha9 in vb, :oops:

 

i mounted alpha7 in windows7, and then replace the zImage,

umount it, and dd into a working version of dsm in vb.

 

after reboot, it seem stop on the page ...

 

any advice for me?

i am using N40l with 9261-8i ...

 

i cannot get into any console/terminal :oops:

 

i dd the alpha7.img , it work againt ...

and then replace the zImage from alpha8, it boot-up to "DiskStation>",

i could login in vb console, however, Cannot going in by the "192.xx.xx.xx:5000" ...

 

any difference between alpha7 and alpha8? only more drivers?

 

Yep. Did you also copy the new GRUB conf? If not, then delete all "initrd rd.gz" lines in your config.

Link to post
Share on other sites

Hello,

I have a Asrock H87E motherboard with an integrated Giga PHY Intel ® I217V network card.

Unfortunately, the network card is often not recognized at the start of Gnoboot (alpha9) and the system starts without a network.

Is it possible to deposit the network card in the config fixed, so always the Intel driver is loaded.

How exactly do I have to do that and what files need to be adjusted accordingly.

 

Thanks and regards

 

Michael

Link to post
Share on other sites

I sumited the form and waiting for the download link. Can I have the password for alpha10? want to give it a try for the new FAT32 image.

 

i've tried alpha 8, the system is very stable.

But little problems(mark red):

221738rzrzarnwb9ir2uzm.jpg

Link to post
Share on other sites
I sumited the form and waiting for the download link. Can I have the password for alpha10? want to give it a try for the new FAT32 image.

 

i've tried alpha 8, the system is very stable.

But little problems(mark red):

221738rzrzarnwb9ir2uzm.jpg

 

SMART not supported is Virtual Machine issue.

Link to post
Share on other sites

I am sending report/feedback for gnoboot-alpha9 on Xen Server. (dd alpha7 + alpha8 grub config + alpha9 zImage), regarding paravirtualization.

 

Generaly there is problem with disks (Xen blkfront, attaches new devices /dev/xvd[a-f] instead of /dev/hd[a-f]). Further I can't install DSM using Syno Assistant - error 38 - no Disk.

 

See attached dmesg + boot screens, any Idea how to fix it?

 

Another issue is default video mode, Xen does not support default one, I am using 318. In addition to that maybe there is wrong Hypervisor detection, see frst boot screen - hyperv detected :/.... What seems wrong is default inet_number = 4... see some messages in dmesg / boot screen.

 

dmesg

[    0.000000] Linux version 3.2.40 (root@gnoboot) (gcc version 4.2.0) #2 SMP Fri Feb 28 08:52:14 CST 2014
[    0.000000] Command line: sn=B3JN00310
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fc00000 (usable)
[    0.000000]  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Xen HVM domU, BIOS 4.1.5 11/28/2013
[    0.000000] Hypervisor detected: Xen HVM
[    0.000000] Xen version 4.1.
[    0.000000] Xen Platform PCI: I/O protocol version 1
[    0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
[    0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
[    0.000000] You might have to change the root device
[    0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[    0.000000] in your root= kernel command line option
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1fc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-combining
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00F0000000 mask 3FF8000000 uncachable
[    0.000000]   1 base 00F8000000 mask 3FFC000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [ffff8800000fb730] fb730
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000001fc00000
[    0.000000]  0000000000 - 001fc00000 page 2M
[    0.000000] kernel direct mapping tables up to 1fc00000 @ 1fbfe000-1fc00000
[    0.000000] ACPI: RSDP 00000000000ea020 00024 (v02    Xen)
[    0.000000] ACPI: XSDT 00000000fc00eb80 00044 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: FACP 00000000fc00e940 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: DSDT 00000000fc002c40 0BC75 (v02    Xen      HVM 00000000 INTL 20090123)
[    0.000000] ACPI: FACS 00000000fc002c00 00040
[    0.000000] ACPI: APIC 00000000fc00ea40 000D8 (v02    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: HPET 00000000fc00eb20 00038 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: WAET 00000000fc00eb58 00028 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001ea00000-ffff88001f1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0001fc00
[    0.000000] On node 0 totalpages: 129934
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1722 pages used for memmap
[    0.000000]   DMA32 zone: 124230 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1f48
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 15 CPUs, 13 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 1fc00000 (gap: 1fc00000:dc400000)
[    0.000000] Booting paravirtualized kernel on Xen HVM
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:15 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88001f800000 s75776 r8192 d22528 u131072
[    0.000000] pcpu-alloc: s75776 r8192 d22528 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -- 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128151
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=1 netif_num=4 syno_hw_version=DS3612xs sn=B3JN00310
[    0.000000] Internal HD num: 1
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hardware Version: DS3612xs-j
[    0.000000] Serial Number: B3JN00310
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 486468k/520192k available (3530k kernel code, 456k absent, 33268k reserved, 2929k data, 14444k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:1208 16
[    0.000000] Xen HVM callback vector for event delivery is enabled
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Detected 1995.067 MHz processor.
[    0.001999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.13 BogoMIPS (lpj=1995067)
[    0.001999] pid_max: default: 32768 minimum: 301
[    0.001999] Mount-cache hash table entries: 256
[    0.001999] mce: CPU supports 0 MCE banks
[    0.010756] ACPI: Core revision 20110623
[    0.016880] Switched APIC routing to physical flat.
[    0.019208] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.029238] CPU0: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 0b
[    0.029259] Xen: using vcpuop timer interface
[    0.029272] installing Xen timer for CPU 0
[    0.029377] cpu 0 spinlock event irq 69
[    0.029381] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[    0.031046] cpu 1 spinlock event irq 70
[    0.032059] Booting Node   0, Processors  #1
[    0.032063] smpboot cpu 1: start_ip = 99000
[    0.001999] mce: CPU supports 0 MCE banks
[    0.165084] installing Xen timer for CPU 1
[    0.165117] Brought up 2 CPUs
[    0.165125] Total of 2 processors activated (4636.44 BogoMIPS).
[    0.209004] xor: automatically using best checksumming function: generic_sse
[    0.213995]    generic_sse:   152.000 MB/sec
[    0.214000] xor: using function: generic_sse (152.000 MB/sec)
[    0.214122] NET: Registered protocol family 16
[    0.225008] ACPI: bus type pci registered
[    0.228122] PCI: Using configuration type 1 for base access
[    0.309077] bio: create slab  at 0
[    0.328016] raid6: int64x1    238 MB/s
[    0.344993] raid6: int64x2    316 MB/s
[    0.361975] raid6: int64x4    308 MB/s
[    0.378993] raid6: int64x8    226 MB/s
[    0.395967] raid6: sse2x1     367 MB/s
[    0.412978] raid6: sse2x2     578 MB/s
[    0.429975] raid6: sse2x4     648 MB/s
[    0.429980] raid6: using algorithm sse2x4 (648 MB/s)
[    0.431975] ACPI: Added _OSI(Module Device)
[    0.431979] ACPI: Added _OSI(Processor Device)
[    0.431984] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.431988] ACPI: Added _OSI(Processor Aggregator Device)
[    0.450082] ACPI: EC: Look up EC in DSDT
[    0.497092] ACPI: Interpreter enabled
[    0.497955] ACPI: (supports S0 S5)
[    0.497974] ACPI: Using IOAPIC for interrupt routing
[    0.950067] ACPI: No dock devices found.
[    0.950885] HEST: Table not found.
[    0.950893] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.951001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.952984] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.952990] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.952995] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.952999] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
[    0.953941] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[    0.960998] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[    0.970881] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[    0.976886] pci 0000:00:01.1: reg 20: [io  0xc220-0xc22f]
[    0.980982] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[    0.986879] pci 0000:00:01.2: reg 20: [io  0xc200-0xc21f]
[    0.990021] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[    0.990050] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[    0.990053] * this clock source is slow. Consider trying other clock sources
[    0.998940] pci 0000:00:01.3: quirk: [io  0x1f40-0x1f7f] claimed by PIIX4 ACPI
[    1.001054] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[    1.002995] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[    1.004024] pci 0000:00:02.0: reg 14: [mem 0xf3000000-0xf3000fff]
[    1.011036] pci 0000:00:03.0: [5853:0001] type 0 class 0x000100
[    1.012940] pci 0000:00:03.0: reg 10: [io  0xc000-0xc0ff]
[    1.014000] pci 0000:00:03.0: reg 14: [mem 0xf2000000-0xf2ffffff pref]
[    1.022048] pci_bus 0000:00: on NUMA node 0
[    1.022876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.026886]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    1.925827] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[    1.925996] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.926850] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.927014] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[    1.927842] xen/balloon: Initialising balloon driver.
[    1.927842] xen-balloon: Initialising balloon driver.
[    1.929774] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.929780] vgaarb: loaded
[    1.929784] vgaarb: bridge control possible 0000:00:02.0
[    1.930792] SCSI subsystem initialized
[    1.931784] libata version 3.00 loaded.
[    1.933737] PCI: Using ACPI for IRQ routing
[    1.933742] PCI: pci_cache_line_size set to 64 bytes
[    1.934826] reserve RAM buffer: 000000000009e000 - 000000000009ffff 
[    1.934831] reserve RAM buffer: 000000001fc00000 - 000000001fffffff 
[    1.935868] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.936741] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.936748] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[    1.942852] Switching to clocksource xen
[    1.943066] pnp: PnP ACPI init
[    1.943080] ACPI: bus type pnp registered
[    1.943108] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    1.943266] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.943272] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.943363] pnp 00:01: [bus 00-ff]
[    1.943368] pnp 00:01: [io  0x0cf8-0x0cff]
[    1.943373] pnp 00:01: [io  0x0000-0x0cf7 window]
[    1.943377] pnp 00:01: [io  0x0d00-0xffff window]
[    1.943382] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    1.943386] pnp 00:01: [mem 0xf0000000-0xfbffffff window]
[    1.943536] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.943551] pnp 00:02: [io  0x10c0-0x1141]
[    1.943555] pnp 00:02: [io  0xb044-0xb047]
[    1.943706] system 00:02: [io  0x10c0-0x1141] has been reserved
[    1.943714] system 00:02: [io  0xb044-0xb047] has been reserved
[    1.943720] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.943754] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.943893] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.943921] pnp 00:04: [io  0x0010-0x001f]
[    1.943926] pnp 00:04: [io  0x0022-0x002d]
[    1.943930] pnp 00:04: [io  0x0030-0x003f]
[    1.943934] pnp 00:04: [io  0x0044-0x005f]
[    1.943939] pnp 00:04: [io  0x0062-0x0063]
[    1.943943] pnp 00:04: [io  0x0065-0x006f]
[    1.943947] pnp 00:04: [io  0x0072-0x007f]
[    1.943951] pnp 00:04: [io  0x0080]
[    1.943955] pnp 00:04: [io  0x0084-0x0086]
[    1.943959] pnp 00:04: [io  0x0088]
[    1.943963] pnp 00:04: [io  0x008c-0x008e]
[    1.943968] pnp 00:04: [io  0x0090-0x009f]
[    1.943972] pnp 00:04: [io  0x00a2-0x00bd]
[    1.943976] pnp 00:04: [io  0x00e0-0x00ef]
[    1.943980] pnp 00:04: [io  0x08a0-0x08a3]
[    1.943984] pnp 00:04: [io  0x0cc0-0x0ccf]
[    1.943989] pnp 00:04: [io  0x04d0-0x04d1]
[    1.944170] system 00:04: [io  0x08a0-0x08a3] has been reserved
[    1.944176] system 00:04: [io  0x0cc0-0x0ccf] has been reserved
[    1.944181] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.944186] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.944205] pnp 00:05: [dma 4]
[    1.944209] pnp 00:05: [io  0x0000-0x000f]
[    1.944214] pnp 00:05: [io  0x0081-0x0083]
[    1.944218] pnp 00:05: [io  0x0087]
[    1.944222] pnp 00:05: [io  0x0089-0x008b]
[    1.944226] pnp 00:05: [io  0x008f]
[    1.944230] pnp 00:05: [io  0x00c0-0x00df]
[    1.944234] pnp 00:05: [io  0x0480-0x048f]
[    1.944374] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.944391] pnp 00:06: [io  0x0070-0x0071]
[    1.944410] xen: --> pirq=16 -> irq=8 (gsi=8)
[    1.944415] pnp 00:06: [irq 8]
[    1.944551] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.944566] pnp 00:07: [io  0x0061]
[    1.944705] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.944736] xen: --> pirq=17 -> irq=12 (gsi=12)
[    1.944741] pnp 00:08: [irq 12]
[    1.944881] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.944906] pnp 00:09: [io  0x0060]
[    1.944911] pnp 00:09: [io  0x0064]
[    1.944922] xen: --> pirq=18 -> irq=1 (gsi=1)
[    1.944927] pnp 00:09: [irq 1]
[    1.945071] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.945095] pnp 00:0a: [io  0x03f0-0x03f5]
[    1.945100] pnp 00:0a: [io  0x03f7]
[    1.945112] xen: --> pirq=19 -> irq=6 (gsi=6)
[    1.945116] pnp 00:0a: [irq 6]
[    1.945120] pnp 00:0a: [dma 2]
[    1.945265] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.945297] pnp 00:0b: [io  0x03f8-0x03ff]
[    1.945309] xen: --> pirq=20 -> irq=4 (gsi=4)
[    1.945313] pnp 00:0b: [irq 4]
[    1.945454] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.945497] pnp 00:0c: [io  0x0378-0x037f]
[    1.945508] xen: --> pirq=21 -> irq=7 (gsi=7)
[    1.945513] pnp 00:0c: [irq 7]
[    1.945653] pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.972791] pnp: PnP ACPI: found 13 devices
[    1.972797] ACPI: ACPI bus type pnp unregistered
[    1.986920] PCI: max bus depth: 0 pci_try_num: 1
[    1.986933] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.986938] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.986943] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.986948] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
[    1.987123] NET: Registered protocol family 2
[    1.987245] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    1.987579] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    1.987676] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    1.987770] TCP: Hash tables configured (established 16384 bind 16384)
[    1.987775] TCP reno registered
[    1.987780] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.987788] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.987925] NET: Registered protocol family 1
[    1.988151] RPC: Registered named UNIX socket transport module.
[    1.988156] RPC: Registered udp transport module.
[    1.988160] RPC: Registered tcp transport module.
[    1.988163] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.988172] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.988225] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.988294] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.988412] xen: --> pirq=22 -> irq=23 (gsi=23)
[    1.988418] pci 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.988687] pci 0000:00:01.2: PCI INT D disabled
[    1.988782] pci 0000:00:02.0: Boot video device
[    1.988883] PCI: CLS 0 bytes, default 64
[    2.512478] VFS: Disk quotas dquot_6.5.2
[    2.512544] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.512894] Registering the id_resolver key type
[    2.518181] msgmni has been set to 950
[    2.518237] async_tx: api initialized (async)
[    2.519198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.519204] io scheduler noop registered
[    2.519208] io scheduler deadline registered
[    2.519238] io scheduler cfq registered (default)
[    2.533419] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.545404] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.545410] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.552437] acpiphp: Slot [0] registered
[    2.558465] acpiphp: Slot [1] registered
[    2.564104] acpiphp: Slot [2] registered
[    2.571528] acpiphp: Slot [3] registered
[    2.575273] acpiphp: Slot [4] registered
[    2.579395] acpiphp: Slot [5] registered
[    2.586092] acpiphp: Slot [6] registered
[    2.589247] acpiphp: Slot [7] registered
[    2.593382] acpiphp: Slot [8] registered
[    2.597144] acpiphp: Slot [9] registered
[    2.604035] acpiphp: Slot [10] registered
[    2.611350] acpiphp: Slot [11] registered
[    2.617332] acpiphp: Slot [12] registered
[    2.623523] acpiphp: Slot [13] registered
[    2.627691] acpiphp: Slot [14] registered
[    2.635788] acpiphp: Slot [15] registered
[    2.640740] acpiphp: Slot [16] registered
[    2.646621] acpiphp: Slot [17] registered
[    2.653424] acpiphp: Slot [18] registered
[    2.657438] acpiphp: Slot [19] registered
[    2.659321] acpiphp: Slot [20] registered
[    2.665949] acpiphp: Slot [21] registered
[    2.672488] acpiphp: Slot [22] registered
[    2.676464] acpiphp: Slot [23] registered
[    2.680372] acpiphp: Slot [24] registered
[    2.685445] acpiphp: Slot [25] registered
[    2.691895] acpiphp: Slot [26] registered
[    2.698915] acpiphp: Slot [27] registered
[    2.704525] acpiphp: Slot [28] registered
[    2.709181] acpiphp: Slot [29] registered
[    2.714276] acpiphp: Slot [30] registered
[    2.715852] acpiphp: Slot [31] registered
[    2.725773] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[    2.725782] vesafb: scrolling: redraw
[    2.725787] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    2.725989] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000080000, using 4096k, total 4096k
[    2.742565] Console: switching to colour frame buffer device 128x48
[    2.748444] fb0: VESA VGA frame buffer device
[    2.765904] intel_idle: does not run on family 6 model 15
[    2.770234] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.770244] ACPI: Power Button [PWRF]
[    2.773508] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[    2.773515] ACPI: Sleep Button [sLPF]
[    2.821594] ERST: Table is not found!
[    2.821599] GHES: HEST is not enabled!
[    2.821704] xen: --> pirq=23 -> irq=30 (gsi=30)
[    2.821711] xen-platform-pci 0000:00:03.0: PCI INT C -> GSI 30 (level, low) -> IRQ 30
[    2.824559] Grant table initialized
[    2.837829] init_memory_mapping: 0000000020000000-0000000028000000
[    2.837840]  0020000000 - 0028000000 page 2M
[    3.378172] Refined TSC clocksource calibration: 1995.066 MHz.
[    5.893587] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    5.921970] serial8250: ttyS1 at I/O 0x3f8 (irq = 4) is a 16550A
[    6.209108] brd: module loaded
[    6.215590] vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
[    6.217427] blkfront: xvdb: barrier: enabled
[    6.240244]  xvdb: unknown partition table
[    6.257815] blkfront: xvda: barrier: enabled
[    6.273777] Loading iSCSI transport class v2.0-870.
[    6.308989]  xvda: xvda1
[    6.309090] This is not a kind of scsi disk 202
[    6.343171] Setting capacity to 33554432
[    6.343181] xvdb: detected capacity change from 0 to 17179869184
[    6.343498] Setting capacity to 65536
[    6.343505] xvda: detected capacity change from 0 to 33554432
[    6.411791] rdac: device handler registered
[    6.478549] Initialising Xen virtual ethernet driver.
[    6.515441] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    6.524352] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.524368] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.544683] rtc_cmos 00:06: RTC can wake from S4
[    6.555513] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    6.555635] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    6.562317] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    6.565755] i2c /dev entries driver
[    6.571606] md: linear personality registered for level -1
[    6.571612] md: raid0 personality registered for level 0
[    6.571616] md: raid1 personality registered for level 1
[    6.571621] md: raid10 personality registered for level 10
[    6.571625] md: raid6 personality registered for level 6
[    6.571629] md: raid5 personality registered for level 5
[    6.571633] md: raid4 personality registered for level 4
[    6.576160] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    6.576170] cpuidle: using governor ladder
[    6.576174] cpuidle: using governor menu
[    6.576525] TCP cubic registered
[    6.576532] NET: Registered protocol family 17
[    6.576572] Registering the dns_resolver key type
[    6.595022] XENBUS: Device with no driver: device/vbd/5696
[    6.595155] rtc_cmos 00:06: setting system clock to 2014-03-04 15:31:24 UTC (1393947084)
[    6.600312] Freeing unused kernel memory: 14444k freed
[    6.610248] Write protecting the kernel read-only data: 6144k
[    6.612708] Freeing unused kernel memory: 548k freed
[    6.614284] Freeing unused kernel memory: 268k freed
[    7.412347] Loading modules backported from Linux version v3.12.8-0-g97f15f1
[    7.412353] Backport generated by backports.git v3.12.8-1-0-geb41fad
[    7.435646] fan: Unknown symbol thermal_cooling_device_register (err 0)
[    7.435664] fan: Unknown symbol thermal_cooling_device_unregister (err 0)
[    7.555875] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[    7.614156] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[    7.640395] dca service started, version 1.12.1
[    7.669525] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    7.669530] e100: Copyright(c) 1999-2006 Intel Corporation
[    7.697825] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.697831] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.725387] e1000e_new: Intel(R) PRO/1000 Network Driver - 3.0.4-NAPI
[    7.725392] e1000e_new: Copyright(c) 1999 - 2014 Intel Corporation.
[    7.753271] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    7.787290] Intel(R) Gigabit Ethernet Network Driver - version 5.0.6
[    7.787295] Copyright (c) 2007-2013 Intel Corporation.
[    7.821450] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    7.821455] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[    7.855531] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
[    7.855539] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
[    8.168305] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    8.199756] 8139too: 8139too Fast Ethernet driver 0.9.28
[    8.265321] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    8.382696] sky2: driver version 1.30
[    8.472312] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    8.472317] Copyright (c) 2007 Atheros Corporation.
[    8.570946] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    8.631621] sis900.c: v1.08.10 Apr. 2 2006
[    8.690237] Brocade 10G Ethernet driver - version: 3.0.2.2
[    8.726807] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25)
[    8.764917] NET: Registered protocol family 10
[    8.789840] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[    8.906023] cxgb4vf: could not create debugfs entry, continuing
[    8.990148] QLogic/NetXen Network Driver v4.0.77
[    9.054597] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25
[    9.109662] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.28
[    9.182129] iscsi: registered transport (tcp)
[    9.249317] pata_acpi 0000:00:01.1: setting latency timer to 64
[   10.175783] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[   10.399289] ata_piix 0000:00:01.1: version 2.13
[   10.439321] scsi0 : ata_piix
[   10.460444] scsi1 : ata_piix
[   10.467207] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
[   10.467214] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
[   10.776454] ata2.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[   10.777935] ata2.01: configured for MWDMA2
[   10.782420] scsi 1:0:1:0: CD-ROM            QEMU     QEMU DVD-ROM             0.10 PQ: 0 ANSI: 5
[   10.835896] scsi 1:0:1:0: Attached scsi generic sg0 type 5
[   10.955181] Fusion MPT base driver 3.04.20
[   10.955186] Copyright (c) 1999-2008 LSI Corporation
[   11.015097] Fusion MPT SPI Host driver 3.04.20
[   11.049991] Fusion MPT SAS Host driver 3.04.20
[   11.077953] mpt2sas version 13.100.00.00 loaded
[   11.110303] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[   11.140177] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[   11.174891] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[   11.205933] Adaptec aacraid driver 1.1-7[28000]-ms
[   11.238578] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[   11.455999] mv61xx: module license 'Proprietary' taints kernel.
[   11.456005] Disabling lock debugging due to kernel taint
[   11.491557] 3ware Storage Controller device driver for Linux v1.26.02.003.
[   11.527780] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[   11.555366] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[   11.591285] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[   11.694388] md: Autodetecting RAID arrays.
[   11.694398] md: Scanned 0 and added 0 devices.
[   11.694401] md: autorun ...
[   11.694404] md: ... autorun DONE.
[   11.789127] synobios: load, major number 201
[   11.789135] Brand: Synology
[   11.789139] Model: DS-3612xs
[   11.789145] set group disks wakeup number to 4, spinup time deno 7
[   12.328753] synobios: unload
[   12.634964] md: md1 stopped.
[   12.721104] Unable to find swap-space signature
[   12.948107] usbcore: registered new interface driver usbfs
[   12.952743] usbcore: registered new interface driver hub
[   12.967411] usbcore: registered new interface driver ethub
[   12.978705] usbcore: registered new device driver usb
[   13.651234] fuse init (API version 7.17)
[   13.687909] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[   13.687931] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[   13.687943] Error: Driver 'e1000e' is already registered, aborting...
[   13.752002] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[   13.752008] Copyright (c) 2007-2011 Intel Corporation.
[   13.752018] Error: Driver 'igb' is already registered, aborting...
[   13.910974] Btrfs loaded
[   14.042016] synobios: load, major number 201
[   14.042025] Brand: Synology
[   14.042030] Model: DS-3612xs
[   14.042035] set group disks wakeup number to 4, spinup time deno 7
[   22.804227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   22.838313] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   22.940092] uhci_hcd: USB Universal Host Controller Interface driver
[   22.940299] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[   22.940446] uhci_hcd 0000:00:01.2: setting latency timer to 64
[   22.940489] uhci_hcd 0000:00:01.2: UHCI Host Controller
[   22.940532] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[   22.940822] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
[   22.943915] hub 1-0:1.0: USB hub found
[   22.943926] hub 1-0:1.0: 2 ports detected
[   23.011028] Initializing USB Mass Storage driver...
[   23.013402] usbcore: registered new interface driver usb-storage
[   23.013407] USB Mass Storage support registered.
[   23.051044] usbcore: registered new interface driver usblp
[   23.116767] usbcore: registered new interface driver usbhid
[   23.116772] usbhid: USB HID core driver
[   23.296183] usb 1-2: new full-speed USB device number 2 using uhci_hcd
[   24.549887] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input3
[   24.549899] Get empty minor:104
[   24.552675] generic-usb 0003:0627:0001.0001: input,hiddev0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
[  366.395020] ps invoked oom-killer: gfp_mask=0x800d0, order=0, oom_adj=0, oom_score_adj=0
[  366.395028] Pid: 7922, comm: ps Tainted: P           O 3.2.40 #2
[  366.395032] Call Trace:
[  366.395065]  [] ? dump_header+0x70/0x187
[  366.395228]  [] ? _raw_spin_lock+0x5/0x8
[  366.395234]  [] ? find_lock_task_mm+0x14/0x55
[  366.395239]  [] ? get_mm_rss+0x21/0x29
[  366.395245]  [] ? oom_kill_process+0x4a/0x283
[  366.395251]  [] ? out_of_memory+0x1c3/0x233
[  366.395257]  [] ? __alloc_pages_nodemask+0x571/0x628
[  366.395264]  [] ? __get_free_pages+0xf/0x4d
[  366.395270]  [] ? get_pid_task+0x5/0xf
[  366.395289]  [] ? proc_info_read+0x46/0xa6
[  366.395295]  [] ? vfs_read+0xa2/0xd9
[  366.395300]  [] ? sys_read+0x45/0x6b
[  366.395306]  [] ? system_call_fastpath+0x16/0x1b
[  366.395310] Mem-Info:
[  366.395314] DMA per-cpu:
[  366.395318] CPU    0: hi:    0, btch:   1 usd:   0
[  366.395322] CPU    1: hi:    0, btch:   1 usd:   0
[  366.395326] DMA32 per-cpu:
[  366.395330] CPU    0: hi:  186, btch:  31 usd:   3
[  366.395334] CPU    1: hi:  186, btch:  31 usd:  83
[  366.395342] active_anon:343 inactive_anon:62 isolated_anon:0
[  366.395344]  active_file:0 inactive_file:0 isolated_file:0
[  366.395347]  unevictable:117889 dirty:0 writeback:0 unstable:0
[  366.395350]  free:1195 slab_reclaimable:1024 slab_unreclaimable:1859
[  366.395353]  mapped:444 shmem:62 pagetables:320 bounce:0
[  366.395363] DMA free:2024kB min:84kB low:104kB high:124kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:13852kB isolated(anon):0kB isolated(file):0kB present:15684kB mlocked:13864kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:28kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
[  366.395370] lowmem_reserve[]: 0 485 485 485
[  366.395382] DMA32 free:2756kB min:2772kB low:3464kB high:4156kB active_anon:1372kB inactive_anon:248kB active_file:0kB inactive_file:0kB unevictable:457704kB isolated(anon):0kB isolated(file):0kB present:496920kB mlocked:415152kB dirty:0kB writeback:0kB mapped:1776kB shmem:248kB slab_reclaimable:4096kB slab_unreclaimable:7436kB kernel_stack:456kB pagetables:1252kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
[  366.395390] lowmem_reserve[]: 0 0 0 0
[  366.395396] DMA: 0*4kB 1*8kB 0*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 2024kB
[  366.395407] DMA32: 33*4kB 4*8kB 2*16kB 0*32kB 0*64kB 0*128kB 0*256kB 1*512kB 0*1024kB 1*2048kB 0*4096kB = 2756kB
[  366.395417] 10688 total pagecache pages
[  366.395421] 0 pages in swap cache
[  366.395425] Swap cache stats: add 0, delete 0, find 0/0
[  366.395429] Free swap  = 0kB
[  366.395432] Total swap = 0kB
[  366.398947] 163824 pages RAM
[  366.398952] 37368 pages reserved
[  366.398956] 1231 pages shared
[  366.398959] 122987 pages non-shared
[  366.398964] [ pid ]   uid  tgid total_vm      rss cpu oom_adj oom_score_adj name
[  366.398980] [ 6923]     0  6923     1524       71   0       0             0 udhcpc
[  366.398987] [ 6974]     0  6974     1523       12   1       0             0 syslogd
[  366.398993] [ 6979]     0  6979     1522       10   1       0             0 klogd
[  366.399000] [ 7027]     0  7027      266       20   1       0             0 scemd
[  366.399006] [ 7070]     0  7070      267       63   0       0             0 findhostd
[  366.399012] [ 7086]     0  7086     1524       14   0       0             0 httpd
[  366.399018] [ 7089]     0  7089     1524       15   0       0             0 httpd
[  366.399024] [ 7099]     0  7099      486       71   0       0             0 minissdpd
[  366.399030] [ 7129]     0  7129      144       17   0       0             0 nbnsd
[  366.399036] [ 7184]     0  7184      656      263   0       0             0 avahi-daemon
[  366.399043] [ 7391]     0  7391     1540      100   0       0             0 burnin_test
[  366.399049] [ 7395]     0  7395     1549      117   1       0             0 ash
[  366.399055] [ 7476]     0  7476      269       21   0       0             0 manutild
[  366.399061] [ 7917]     0  7917     1540       64   1       0             0 burnin_test
[  366.399069] [ 7918]     0  7918   107911   107262   0       0             0 memtester
[  366.399112] [ 7921]     0  7921     1540       30   1       0             0 burnin_test
[  366.399121] [ 7922]     0  7922     1524       79   1       0             0 ps
[  366.399127] [ 7923]     0  7923     1540       31   0       0             0 burnin_test
[  366.399134] [ 7924]     0  7924     1523       16   1       0             0 grep
[  366.399140] Out of memory: Kill process 7918 (memtester) score 826 or sacrifice child
[  366.399148] Killed process 7918 (memtester) total-vm:431644kB, anon-rss:428876kB, file-rss:172kB

 

cat /proc/partitions

(Using 32MB first disk, and 16GB second disk)

major minor  #blocks  name

202       16   16777216 xvdb
202        0      32768 xvda
202        1      32098 xvda1

 

RhD1anH.jpg

ptKZpRR.jpg

K0A76d7.jpg

 

Once problem with disks will be solved, i guess paravirt will be working fine. Maybe for further Xen optimization some kernel modules should me disabled (failing during booting anyway).

 

Thanks :smile:

Link to post
Share on other sites
Hello,

I have a Asrock H87E motherboard with an integrated Giga PHY Intel ® I217V network card.

Unfortunately, the network card is often not recognized at the start of Gnoboot (alpha9) and the system starts without a network.

Is it possible to deposit the network card in the config fixed, so always the Intel driver is loaded.

How exactly do I have to do that and what files need to be adjusted accordingly.

 

Thanks and regards

 

Michael

 

It's already default, can you provide dmesg?

 

The Problem.is xens para disks are reflected as xda xdb etc... Syno needs them to be at /dev/sda and so on

 

@gno: Probably that behavior is tuneable in the driver?

 

Nope, but there's a workaround which is a bit ugly or modify the driver but I'm not sure about its side effect. :???:

 

@billy

Are you running nested Xen on HyperV? Can you login to console and try running virt-what?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.