Jump to content
XPEnology Community

XPEnology gnoBoot


gnoboot

Recommended Posts

Hi there!

 

can someone help understanding how volume numbers are assigned?

 

I'm on ESXi, made gnoboot as IDE disk, second disk made as pvscsi, put rmmod=ata_piix. Then attached two RDM disks. One of these RDMs was created as DSM's SHR and another one is just basic ext4.

 

mount shows:

 

DS5> mount

/dev/root on / type ext4 (defaults)

none on /dev/pts type devpts (gid=4,mode=620)

/sys on /sys type sysfs (0)

/tmp on /tmp type tmpfs (0)

/proc/bus/usb on /proc/bus/usb type usbfs (0)

/dev/vg1000/lv on /volume1 type ext4 (usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl)

/dev/md4 on /volume3 type ext4 (usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl)

/dev/vg1002/lv on /volume4 type ext4 (usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl)

DS5>

 

why /dev/md4 is mounted on /volume3 and not on /volume2 and /dev/vg1002/lv on /volume4 rather than /volume3 ?

 

BR

Link to comment
Share on other sites

I am currently using Trantor's XPEnology DS3612xs DSM 4.3 build 3827 on my Proliant N54L. I really want to get my machine to work on DSM 5.0 but I know nothing about gnoboot.I don't want my data to be wiped away after installing DSM 5.0 with gnoboot :sad: Is there any thread that I can refer to for the solutions?

Link to comment
Share on other sites

Thx Gnoboot for supporting (Add MagicPro ProHDTV Dual USB multimedia driver from my request!)

I am currently using the 10.4 (HP N40L and upgrade from trantor 5.0 beta) perfectly and try to upgrade tio 10.5 by replacing the USB.

 

Unfortunately, I can boot it up and I can find my Syno in synology assistant.

But I can't login and wait a long of time to "Starting services."

 

And

 

I found the error on the screen, attached the below:

Loading module rr62x [fail]

IMG_4299_zps15058c27.jpg

and wait around few minutes the screen change to below screen:

IMG_4300_zps33d73f81.jpg

 

Now I need to fallback to 1.4....

Link to comment
Share on other sites

Thx Gnoboot for supporting (Add MagicPro ProHDTV Dual USB multimedia driver from my request!)

I am currently using the 10.4 (HP N40L and upgrade from trantor 5.0 beta) perfectly and try to upgrade tio 10.5 by replacing the USB.

 

Unfortunately, I can boot it up and I can find my Syno in synology assistant.

But I can't login and wait a long of time to "Starting services."

 

And

 

I found the error on the screen, attached the below:

Loading module rr62x [fail]

IMG_4299_zps15058c27.jpg

and wait around few minutes the screen change to below screen:

IMG_4300_zps33d73f81.jpg

 

Now I need to fallback to 1.4....

 

The rr66x fail message is nothing to worry about iirc, its just the rocketraid driver can´t find a rocketraid raid card in your PC, thats why the driver fails to load. the other thing i can´t answer though.

Link to comment
Share on other sites

Hi Danyz, did you checked the bios settings? are your disks recognized on each ports in the bios?

 

I am pretty sure you have already checked that ... But IT is just IN case :wink:

 

Yes, I forgot to say that I was in 4.3 with Trantor release, I updated to gnoboot 10.5

 

Thanks

Link to comment
Share on other sites

Hi Danyz, did you checked the bios settings? are your disks recognized on each ports in the bios?

 

I am pretty sure you have already checked that ... But IT is just IN case :wink:

 

Yes, I forgot to say that I was in 4.3 with Trantor release, I updated to gnoboot 10.5

 

Thanks

 

To me, I need to use gnoboot.me to start migration from 4.3 to 10.5.

And all thirdparty app have to be reinstalled.

File server retained.

Link to comment
Share on other sites

Update for Xen Paravirtualization

 

Hi 10.4-vfat is recognized by XenServer 6.2SP1 in PV mode (pygrub) as bootable however during booting it get stuck after "Re-scanning disks". (Tried 10.4-ext2 but no luck)

 

21dqv0y.png

 

I am booting with these arguments: "root=/dev/md0 console=hvc0 sn=... debug=true", perhaps root=?? is wrong?

 

Any idea what to try next?

 

 

Console output with debug=true

[    0.000000] Linux version 3.2.40 (root@gnoboot) (gcc version 4.2.0) #6 SMP Sat Mar 22 14:41:23 CST 2014
[    0.000000] Command line:  root=/dev/md0 console=hvc0 sn=... debug=true
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] ACPI in unprivileged domain disabled
[    0.000000] Released 0 pages of unused memory
[    0.000000] Set 0 page(s) to 1-1 mapping
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000020000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI not present or invalid.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 027e7000
[    0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[    0.000000]  0000000000 - 0020000000 page 4k
[    0.000000] kernel direct mapping tables up to 20000000 @ 26e5000-27e7000
[    0.000000] xen: setting RW the range 27cb000 - 27e7000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000] On node 0 totalpages: 130960
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3923 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1736 pages used for memmap
[    0.000000]   DMA32 zone: 125240 pages, LIFO batch:31
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] No local APIC present
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.1.5 (preserve-AD)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88001fc00000 s75776 r8192 d22528 u1048576
[    0.000000] pcpu-alloc: s75776 r8192 d22528 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129163
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=1 netif_num=4 syno_hw_version=DS3612xs  root=/dev/md0 console=hvc0 sn=... debug=true
[    0.000000] Internal HD num: 1
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hardware Version: DS3612xs-j
[    0.000000] Serial Number: ...
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 490052k/524288k available (3541k kernel code, 448k absent, 33788k reserved, 2920k data, 15192k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:288 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [hvc0] enabled
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] Detected 1995.067 MHz processor.
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.13 BogoMIPS (lpj=1995067)
[    0.000999] pid_max: default: 32768 minimum: 301
[    0.000999] Mount-cache hash table entries: 256
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 0
[    0.000999] SMP alternatives: switching to UP code
[    0.030165] cpu 0 spinlock event irq 17
[    0.030207] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[    0.030439] installing Xen timer for CPU 1
[    0.030459] cpu 1 spinlock event irq 23
[    0.030501] SMP alternatives: switching to SMP code
[    0.057923] Brought up 2 CPUs
[    0.063071] xor: automatically using best checksumming function: generic_sse
[    0.068003]    generic_sse:  2096.000 MB/sec
[    0.068012] xor: using function: generic_sse (2096.000 MB/sec)
[    0.068083] Grant table initialized
[    0.068182] NET: Registered protocol family 16
[    0.070009] PCI: setting up Xen PCI frontend stub
[    0.070021] PCI: pci_cache_line_size set to 64 bytes
[    0.082626] bio: create slab  at 0
[    0.099028] raid6: int64x1   1753 MB/s
[    0.115999] raid6: int64x2   2386 MB/s
[    0.133022] raid6: int64x4   2289 MB/s
[    0.150031] raid6: int64x8   1601 MB/s
[    0.167006] raid6: sse2x1    2945 MB/s
[    0.184001] raid6: sse2x2    5496 MB/s
[    0.200995] raid6: sse2x4    6304 MB/s
[    0.201008] raid6: using algorithm sse2x4 (6304 MB/s)
[    0.201223] ACPI: Interpreter disabled.
[    0.201430] xen/balloon: Initialising balloon driver.
[    0.203147] xen-balloon: Initialising balloon driver.
[    0.204135] vgaarb: loaded
[    0.205071] SCSI subsystem initialized
[    0.205107] libata version 3.00 loaded.
[    0.206045] PCI: System does not support PCI
[    0.206045] PCI: System does not support PCI
[    0.206487] Switching to clocksource xen
[    0.209711] pnp: PnP ACPI: disabled
[    0.222217] PCI: max bus depth: 0 pci_try_num: 1
[    0.222383] NET: Registered protocol family 2
[    0.222503] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.222821] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.222944] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.223079] TCP: Hash tables configured (established 16384 bind 16384)
[    0.223090] TCP reno registered
[    0.223097] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.223109] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.223215] NET: Registered protocol family 1
[    0.223411] RPC: Registered named UNIX socket transport module.
[    0.223421] RPC: Registered udp transport module.
[    0.223426] RPC: Registered tcp transport module.
[    0.223432] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.223441] PCI: CLS 0 bytes, default 64
[    0.614288] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.690959] VFS: Disk quotas dquot_6.5.2
[    0.691026] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.691274] Registering the id_resolver key type
[    0.693300] msgmni has been set to 957
[    0.693349] async_tx: api initialized (async)
[    0.693524] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.693540] io scheduler noop registered
[    0.693546] io scheduler deadline registered
[    0.693604] io scheduler cfq registered (default)
[    0.698908] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.711263] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.711281] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.418865] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.620562] brd: module loaded
[    2.630271] blkfront: sda: barrier: enabled
[    2.641918]  sda: sda1
[    2.641973] This is not a kind of scsi disk 202
[    2.647008] Loading iSCSI transport class v2.0-870.
[    2.662592] blkfront: sdb: barrier: enabled
[    2.691288]  sdb: sdb1 sdb2
[    2.691343] This is not a kind of scsi disk 202
[    2.691370] This is not a kind of scsi disk 202
[    2.746364] rdac: device handler registered
[    2.797833] Initialising Xen virtual ethernet driver.
[    2.834916] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.863745] i8042: No controller found
[    3.904804] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    3.905102] rtc_cmos: probe of rtc_cmos failed with error -38
[    3.909600] i2c /dev entries driver
[    3.925393] coretemp coretemp.0: Using relative temperature scale!
[    3.925436] md: linear personality registered for level -1
[    3.925445] md: raid0 personality registered for level 0
[    3.925454] md: raid1 personality registered for level 1
[    3.925461] md: raid10 personality registered for level 10
[    3.925467] md: raid6 personality registered for level 6
[    3.925474] md: raid5 personality registered for level 5
[    3.925480] md: raid4 personality registered for level 4
[    3.931199] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.931582] TCP cubic registered
[    3.931594] NET: Registered protocol family 17
[    3.931622] Registering the dns_resolver key type
[    3.939223] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    3.948025] Freeing unused kernel memory: 15192k freed
[    3.956296] Write protecting the kernel read-only data: 6144k
[    3.960594] Freeing unused kernel memory: 536k freed
[    3.961046] Freeing unused kernel memory: 260k freed
:: START /linuxrc.syno[  OK  ]
:: Checking hypervisor[  OK  ]
Detected hypervisor: xen
xen-domU
ash: xen-domU: unknown operand
:: Loading module xen-gntdev[  OK  ]
:: Loading module xen-gntalloc[  OK  ]
:: Loading module xenfs[  OK  ]
:: Loading module xen-evtchn[ BUSY ][    4.150104] Event-channel device installed.
[  OK  ]
:: Loading module virtio_blk[ BUSY ][    4.168911] virtio_blk: Unknown symbol register_virtio_driver (err 0)
[    4.168954] virtio_blk: Unknown symbol unregister_virtio_driver (err 0)
[    4.168965] virtio_blk: Unknown symbol virtqueue_add_buf_gfp (err 0)
[    4.168992] virtio_blk: Unknown symbol virtqueue_get_buf (err 0)
[    4.169005] virtio_blk: Unknown symbol virtqueue_kick (err 0)
[    4.169016] virtio_blk: Unknown symbol virtio_check_driver_offered_feature (err 0)
[FAILED]
:: Loading module virtio_net[ BUSY ][    4.184478] virtio_net: Unknown symbol register_virtio_driver (err 0)
[    4.184496] virtio_net: Unknown symbol virtqueue_enable_cb (err 0)
[    4.184507] virtio_net: Unknown symbol virtqueue_detach_unused_buf (err 0)
[    4.184539] virtio_net: Unknown symbol unregister_virtio_driver (err 0)
[    4.184549] virtio_net: Unknown symbol virtqueue_add_buf_gfp (err 0)
[    4.184556] virtio_net: Unknown symbol virtqueue_get_vring_size (err 0)
[    4.184567] virtio_net: Unknown symbol virtqueue_disable_cb (err 0)
[    4.184587] virtio_net: Unknown symbol virtqueue_get_buf (err 0)
[    4.184598] virtio_net: Unknown symbol virtqueue_kick (err 0)
[    4.184613] virtio_net: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    4.184622] virtio_net: Unknown symbol virtqueue_enable_cb_delayed (err 0)
[FAILED]
:: Loading module virtio_ring[ BUSY ][    4.200130] virtio_ring: Unknown symbol virtio_check_driver_offered_feature (err 0)
[FAILED]
:: Loading module virtio[  OK  ]
:: Loading module virtio_balloon[ BUSY ][    4.233019] virtio_balloon: Unknown symbol virtqueue_add_buf_gfp (err 0)
[    4.233044] virtio_balloon: Unknown symbol virtqueue_get_buf (err 0)
[    4.271264] virtio_balloon: Unknown symbol virtqueue_kick (err 0)
[FAILED]
:: Loading module virtio_mmio[ BUSY ][    4.287118] virtio_mmio: Unknown symbol vring_transport_features (err 0)
[    4.287151] virtio_mmio: Unknown symbol vring_interrupt (err 0)
[    4.287161] virtio_mmio: Unknown symbol vring_new_virtqueue (err 0)
[    4.287192] virtio_mmio: Unknown symbol vring_del_virtqueue (err 0)
[FAILED]
:: Loading module virtio_pci[ BUSY ][    4.301443] virtio_pci: Unknown symbol vring_transport_features (err 0)
[    4.301473] virtio_pci: Unknown symbol vring_interrupt (err 0)
[    4.301483] virtio_pci: Unknown symbol vring_new_virtqueue (err 0)
[    4.301511] virtio_pci: Unknown symbol vring_del_virtqueue (err 0)
[FAILED]
:: Loading module virtio_console[ BUSY ][    4.315232] virtio_console: Unknown symbol virtqueue_detach_unused_buf (err 0)
[    4.315278] virtio_console: Unknown symbol virtqueue_add_buf_gfp (err 0)
[    4.315305] virtio_console: Unknown symbol virtqueue_get_buf (err 0)
[    4.315316] virtio_console: Unknown symbol virtqueue_kick (err 0)
[FAILED]
:: Re-scanning disks[ BUSY ][    4.340171] md: Autodetecting RAID arrays.
[    4.340194] This is not a kind of scsi disk 202
[    4.365505] This is not a kind of scsi disk 202
[    4.388421] md: Scanned 2 and added 2 devices.
[    4.388432] md: autorun ...
[    4.388437] md: considering sdb1 ...
[    4.388453] md:  adding sdb1 ...
[    4.388460] md: sdb2 has different UUID to sdb1
[    4.388473] md: created md0
[    4.388478] md: bind
[    4.388505] md: running: 
[    4.388826] bio: create slab  at 1
[    4.388970] md/raid1:md0: active with 1 out of 12 mirrors
[    4.389007] md0: detected capacity change from 0 to 2549940224
[    4.389317] md: considering sdb2 ...
[    4.389328] md:  adding sdb2 ...
[    4.390941] md: created md1
[    4.390949] md: bind
[    4.390967] md: running: 
[    4.396017] md/raid1:md1: active with 1 out of 12 mirrors
[    4.396049] md1: detected capacity change from 0 to 2147418112
[    4.397413] md: ... autorun DONE.
[    4.421155]  md1: unknown partition table
[  OK  ]
+ exec
[    4.498884] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[    4.498903] Disabling lock debugging due to kernel taint

 

 

bump :smile:, anything new? Or any idea what shoul I try?

Link to comment
Share on other sites

Hello, now I`m trying gnoboot-alpha-10.5 and v10.4 directly on hardware (MB GA-EP-DS4). Installed latest DSM 5.0-4458. I have some issuses with that configuration.

 

1. When system boots up I have to wait about 5min to be available on the network, or unplug and plug in Lan cable. Motherboard using Realtek 8111C Chip.

2. Unable to install Update 1 no matter if trying automatic or manual update. System loads update the saying that the file is broken.

3. My DVB-T dongle not workig (works well on Trantor version and 4.3). This is Manta dvbtusb01 it is based on chipset It9135. As I see drivers are present in system, but Videostation not recognizes any tv card.

dmesg

[64440.720177] ------------[ cut here ]------------
[64440.720184] WARNING: at drivers/ata/libata-core.c:5348 ata_qc_issue+0x51/0x371()
[64440.720186] Hardware name: EP45-DS4
[64440.720188] Modules linked in: it913x_fe(O) cifs udf isofs loop btusb(O) hidp(O) rfcomm(O) bluetooth(O) ip6t_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_limit xt_state xt_tcpudp xt_multiport ipt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables usbhid hid usblp usb_storage uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) btrfs zlib_deflate hfsplus md4 hmac i2c_algo_bit fuse vfat fat chainiv cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor cpufreq_stats freq_table dm_snapshot crc_itu_t quota_v2 quota_tree usbcore psnap p8022 llc usb_common zram(C) mpt2sas synoacl_ext4(P) synoacl_vfs(P) hptiop 3w_sas 3w_9xxx 3w_xxxx mv61xx(P) mvsas hpsa arcmsr aic7xxx aic79xx pm80xx(O) aic94xx aacraid megaraid_sas megaraid_mbox megaraid_mm mptsas mptspi mptscsih mptbase scsi_transport_spi scsi_wait_scan sg ata_piix sata_uli sata_svw sata_qstor sata_inic162x sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pata_serverworks pata_oldpiix pata_sch pata_artop pata_atp867x pata_pdc202xx_old pata_pdc2027x pata_it821x pata_hpt3x2n pata_hpt37x pata_hpt366 pata_hpt3x3 pdc_adma pata_via pata_sil680 pata_rdc pata_ninja32 pata_netcell pata_marvell pata_jmicron pata_cmd64x pata_ali ata_generic iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic mlx4_en mlx4_core cxgb4vf cxgb4 cxgb3 cxgb cnic ipv6 bnx2x bna be2net sis900 sis190 jme atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8169(O) r8168(O) 8139too 8139cp tg3(O) libphy b44(O) bnx2 mmc_core ssb(O) uio forcedeth ixgbe ixgb igb_new(O) ioatdma e1000e_new(O) e1000 e100 dca pcnet32 amd8111e tulip mdio mii container fan thermal_sys compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi [last unloaded: it913x_fe]
[64440.720342] Pid: 6118, comm: md0_raid1 Tainted: P         C O 3.2.40 #8
[64440.720344] Call Trace:
[64440.720348]  [] ? ata_qc_issue+0x51/0x371
[64440.720351]  [] ? ata_qc_issue+0x51/0x371
[64440.720355]  [] ? warn_slowpath_common+0x78/0x8d
[64440.720359]  [] ? ata_qc_issue+0x51/0x371
[64440.720362]  [] ? ata_qc_reinit+0x6d/0x7d
[64440.720365]  [] ? ata_ioc32+0x15/0x15
[64440.720368]  [] ? ata_scsi_translate+0xda/0x10f
[64440.720371]  [] ? ata_scsi_queuecmd+0x3f/0x70
[64440.720376]  [] ? scsi_dispatch_cmd+0x295/0x2fe
[64440.720379]  [] ? scsi_request_fn+0x4e7/0x516
[64440.720383]  [] ? blk_queue_bio+0x294/0x2b8
[64440.720386]  [] ? generic_make_request+0x91/0xd0
[64440.720389]  [] ? submit_bio+0xa6/0xaf
[64440.720393]  [] ? md_super_write+0x58/0x83
[64440.720396]  [] ? md_update_sb+0x2e6/0x455
[64440.720399]  [] ? md_check_recovery+0x221/0x579
[64440.720403]  [] ? raid1d+0x33/0x1298
[64440.720407]  [] ? need_resched+0x1e/0x28
[64440.720410]  [] ? __schedule+0x515/0x52f
[64440.720414]  [] ? __switch_to+0x142/0x27c
[64440.720417]  [] ? calc_global_load+0x191/0x191
[64440.720420]  [] ? schedule_timeout+0x1e/0xb8
[64440.720424]  [] ? default_spin_lock_flags+0x5/0x9
[64440.720427]  [] ? _raw_spin_lock_irqsave+0x1e/0x27
[64440.720431]  [] ? default_spin_lock_flags+0x5/0x9
[64440.720434]  [] ? _raw_spin_lock_irqsave+0x1e/0x27
[64440.720437]  [] ? md_thread+0xe4/0x102
[64440.720441]  [] ? wake_up_bit+0x22/0x22
[64440.720444]  [] ? md_trim_bio+0x105/0x105
[64440.720447]  [] ? kthread+0x6a/0x72
[64440.720451]  [] ? kernel_thread_helper+0x4/0x10
[64440.720454]  [] ? kthread_bind+0x5c/0x5c
[64440.720457]  [] ? gs_change+0x13/0x13
[64440.720459] ---[ end trace 8e0b7a312ad2c2cc ]---

 

Any suggestions ?

 

Thanks

Link to comment
Share on other sites

Hello, now I`m trying gnoboot-alpha-10.5 and v10.4 directly on hardware (MB GA-EP-DS4). Installed latest DSM 5.0-4458. I have some issuses with that configuration.

 

2. Unable to install Update 1 no matter if trying automatic or manual update. System loads update the saying that the file is broken.

 

Any suggestions ?

 

Thanks

 

For #2, did you try the following:

 

1) Click Download of update in DSM

2) SSH into box as ROOT

3) Run the following commands:

 

sed ‘s/flashupdateDeb/flashupdateDeb1/’ /autoupd@te.info > /autoupd@te.info1

mv /autoupd@te.info1 /autoupd@te.info

 

4) Click UPDATE box in DSM

 

That fixed my DSM update1 issue.

 

T.

Link to comment
Share on other sites

Can someone suggest a reasonably priced (less than 110 euro) Raid card that will work with gnoboot and 4 Sata disks? a plus but not a requirement would be hotswap support so i dont have to open the VM down if i want to replace a failing disk.

Link to comment
Share on other sites

Can someone suggest a reasonably priced (less than 110 euro) Raid card that will work with gnoboot and 4 Sata disks? a plus but not a requirement would be hotswap support so i dont have to open the VM down if i want to replace a failing disk.

 

I bought this:

http://www.ebay.com/itm/New-Sealed-LSI- ... 461af6dc92

 

LSI 9211-i8

 

Works fine with Gnoboot and DSM 5.0, flashed mine to IT-mode so I can use software-raid :smile:

Link to comment
Share on other sites

Can someone suggest a reasonably priced (less than 110 euro) Raid card that will work with gnoboot and 4 Sata disks? a plus but not a requirement would be hotswap support so i dont have to open the VM down if i want to replace a failing disk.

 

I bought this:

http://www.ebay.com/itm/New-Sealed-LSI- ... 461af6dc92

 

LSI 9211-i8

 

Works fine with Gnoboot and DSM 5.0, flashed mine to IT-mode so I can use software-raid :smile:

 

That looks like a great option! Do you use it with Gnoboot running on ESXi or do you have ESXi installed as the OS on your machine?, also does the disks you have connected show up as disk 1-8 in DSM or does it start at like, disk 5-12? (with disk bay 1-4 being "empty"

Link to comment
Share on other sites

Updated to 10.5

 

Tried adding SSD cache

 

Still the same problem :sad:

 

SKW-SAN> tail -f /var/log/messages

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth0 10.2.0.4 is Active

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth1 10.3.0.4 is Active

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth2 172.16.2.1 is Active

Apr 7 20:58:37 SKW-SAN kernel: [ 632.060284] EXT_INFO: INIT Extent-Pool

Apr 7 20:58:40 SKW-SAN flashcachehandler.cgi: flashcachehandler.cpp:238 Failed to create flashcache on /volume1 [0xEB00 servicec fg_internal_lib.c:104]

Apr 7 20:58:40 SKW-SAN kernel: [ 634.627242] md: md4: set sdf1 to auto_remap [0]

Apr 7 20:58:40 SKW-SAN kernel: [ 634.627243] md: md4: set sde1 to auto_remap [0]

Apr 7 20:58:40 SKW-SAN flashcachehandler.cgi: raid_remove.c:48 [info] clean RAID superblock of /dev/md4

Apr 7 20:58:41 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sde1'

Apr 7 20:58:41 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sdf1'

Apr 7 20:58:46 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: ##### ACTION:add

Apr 7 20:58:46 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list.

Apr 7 20:58:46 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: ##### ACTION:add

Apr 7 20:58:46 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list.

Link to comment
Share on other sites

For #2, did you try the following:

 

1) Click Download of update in DSM

2) SSH into box as ROOT

3) Run the following commands:

 

sed ‘s/flashupdateDeb/flashupdateDeb1/’ /autoupd@te.info > /autoupd@te.info1

mv /autoupd@te.info1 /autoupd@te.info

 

4) Click UPDATE box in DSM

 

That fixed my DSM update1 issue.

 

T.

 

+1

 

It worked for just fine. Thanks!

Link to comment
Share on other sites

Hello,

 

with 10.5 my PERC310 (8 SATA/SAS-Port Controller) doesnt work, the Volume is not showing up...with 10.4 it works great...PLS Help :smile:

I´ve created the Volume in the BIOS settings (4 SAS Drives / 1 Volume) so i dont have to create an Software-Raid in the DSM.

Link to comment
Share on other sites

For #2, did you try the following:

 

1) Click Download of update in DSM

2) SSH into box as ROOT

3) Run the following commands:

 

sed ‘s/flashupdateDeb/flashupdateDeb1/’ /autoupd@te.info > /autoupd@te.info1

mv /autoupd@te.info1 /autoupd@te.info

 

4) Click UPDATE box in DSM

 

That fixed my DSM update1 issue.

 

T.

 

+1

 

It worked for just fine. Thanks!

 

Also works on my system. I don't know why, but I have to copy this from another place (regional settings ?- hmmm)

because quotation marks was not copied propertly. So correct vesion is:

sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1

 

Thanks for help.

Link to comment
Share on other sites

Hi,

 

you told, you would re-integrate Multimedia support. Unformtunately my TeVii DVB-S2 USB is still not recognized...

[10594.901283] usb 1-1: new high-speed USB device number 3 using ehci_hcd
[10595.307514] Got empty serial number. Generate serial number from product.
[10595.706948] dvb_core: Unknown symbol __refrigerator (err 0)
[10595.737320] dvb_usb: Unknown symbol dvb_dmxdev_init (err 0)
[10595.737414] dvb_usb: Unknown symbol dvb_register_adapter (err 0)
[10595.737484] dvb_usb: Unknown symbol dvb_dmx_swfilter_204 (err 0)
[10595.737505] dvb_usb: Unknown symbol dvb_dmx_release (err 0)
[10595.737558] dvb_usb: Unknown symbol dvb_net_init (err 0)
[10595.737580] dvb_usb: Unknown symbol dvb_dmx_swfilter (err 0)
[10595.737606] dvb_usb: Unknown symbol dvb_dmxdev_release (err 0)
[10595.737630] dvb_usb: Unknown symbol dvb_dmx_swfilter_raw (err 0)
[10595.737653] dvb_usb: Unknown symbol dvb_frontend_detach (err 0)
[10595.737676] dvb_usb: Unknown symbol dvb_net_release (err 0)
[10595.737702] dvb_usb: Unknown symbol dvb_unregister_frontend (err 0)
[10595.737737] dvb_usb: Unknown symbol dvb_register_frontend (err 0)
[10595.737761] dvb_usb: Unknown symbol dvb_unregister_adapter (err 0)
[10595.737782] dvb_usb: Unknown symbol dvb_dmx_init (err 0)
[10595.809132] stv0299: Unknown symbol timeval_usec_diff (err 0)
[10595.809171] stv0299: Unknown symbol dvb_frontend_sleep_until (err 0)
[10595.946763] dvb_usb_dw2102: Unknown symbol dvb_usb_generic_rw (err 0)
[10595.946834] dvb_usb_dw2102: Unknown symbol dvb_usb_device_init (err 0)
[10595.946858] dvb_usb_dw2102: Unknown symbol dvb_usb_device_exit (err 0)

 

Any chance to get it working?

Again the link: http://www.tevii.com/Tevii_Product_2014 ... ar.bz2.rar

//edit linuxtv-Link: http://www.linuxtv.org/wiki/index.php/TeVii_S660

Link to comment
Share on other sites

Updated to 10.5

 

Tried adding SSD cache

 

Still the same problem :sad:

 

SKW-SAN> tail -f /var/log/messages

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth0 10.2.0.4 is Active

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth1 10.3.0.4 is Active

Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth2 172.16.2.1 is Active

Apr 7 20:58:37 SKW-SAN kernel: [ 632.060284] EXT_INFO: INIT Extent-Pool

Apr 7 20:58:40 SKW-SAN flashcachehandler.cgi: flashcachehandler.cpp:238 Failed to create flashcache on /volume1 [0xEB00 servicec fg_internal_lib.c:104]

Apr 7 20:58:40 SKW-SAN kernel: [ 634.627242] md: md4: set sdf1 to auto_remap [0]

Apr 7 20:58:40 SKW-SAN kernel: [ 634.627243] md: md4: set sde1 to auto_remap [0]

Apr 7 20:58:40 SKW-SAN flashcachehandler.cgi: raid_remove.c:48 [info] clean RAID superblock of /dev/md4

Apr 7 20:58:41 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sde1'

Apr 7 20:58:41 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sdf1'

Apr 7 20:58:46 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: ##### ACTION:add

Apr 7 20:58:46 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list.

Apr 7 20:58:46 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: ##### ACTION:add

Apr 7 20:58:46 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000

Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list.

 

Haven't looked into it :lol: .

 

Hello,

 

with 10.5 my PERC310 (8 SATA/SAS-Port Controller) doesnt work, the Volume is not showing up...with 10.4 it works great...PLS Help :smile:

I´ve created the Volume in the BIOS settings (4 SAS Drives / 1 Volume) so i dont have to create an Software-Raid in the DSM.

I'm using 9211-8i and it works (IR mode) for me on ESXi+vt-d. Are you using baremetal or vt-d? Doesn't show in DSM or doesn't detect the disk?

 

*

For me i have always problem with Realtek network card 10DE:8136 rev=02 ( motherboard HP IPMEL-AE PEGATRON )

no IP ...?

 

 

addon cards

8086:1229 rev=02 OK

10DE:8169 rev=02 OK

 

I have a log with RR62x failed ...with no card in the computer

 

if i plug a RR622 card run , no problem in sata mode with only one HDD no RAID << fine ****

 

*** to change something or it really takes me a very detailed explanation **

** I know almost nothing linux !! ***

 

Pierre

 

Try to blacklist r8169 using rmmod GRUB option.

BTW, I have tried MagicPro PCTV Dual USB adaptor on my Xpenology box with 10.5 alpha, the dongle is not recognized by video station.

Did you load the drivers in /etc/rc.local?

 

 

bump :smile:, anything new? Or any idea what shoul I try?

Try it again using 10.5, added more boot-up messages to trace your problem.

 

Hello, now I`m trying gnoboot-alpha-10.5 and v10.4 directly on hardware (MB GA-EP-DS4). Installed latest DSM 5.0-4458. I have some issuses with that configuration.

 

1. When system boots up I have to wait about 5min to be available on the network, or unplug and plug in Lan cable. Motherboard using Realtek 8111C Chip.

2. Unable to install Update 1 no matter if trying automatic or manual update. System loads update the saying that the file is broken.

3. My DVB-T dongle not workig (works well on Trantor version and 4.3). This is Manta dvbtusb01 it is based on chipset It9135. As I see drivers are present in system, but Videostation not recognizes any tv card.

dmesg

[64440.720177] ------------[ cut here ]------------
[64440.720184] WARNING: at drivers/ata/libata-core.c:5348 ata_qc_issue+0x51/0x371()
[64440.720186] Hardware name: EP45-DS4
[64440.720188] Modules linked in: it913x_fe(O) cifs udf isofs loop btusb(O) hidp(O) rfcomm(O) bluetooth(O) ip6t_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_limit xt_state xt_tcpudp xt_multiport ipt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables usbhid hid usblp usb_storage uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) btrfs zlib_deflate hfsplus md4 hmac i2c_algo_bit fuse vfat fat chainiv cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor cpufreq_stats freq_table dm_snapshot crc_itu_t quota_v2 quota_tree usbcore psnap p8022 llc usb_common zram(C) mpt2sas synoacl_ext4(P) synoacl_vfs(P) hptiop 3w_sas 3w_9xxx 3w_xxxx mv61xx(P) mvsas hpsa arcmsr aic7xxx aic79xx pm80xx(O) aic94xx aacraid megaraid_sas megaraid_mbox megaraid_mm mptsas mptspi mptscsih mptbase scsi_transport_spi scsi_wait_scan sg ata_piix sata_uli sata_svw sata_qstor sata_inic162x sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pata_serverworks pata_oldpiix pata_sch pata_artop pata_atp867x pata_pdc202xx_old pata_pdc2027x pata_it821x pata_hpt3x2n pata_hpt37x pata_hpt366 pata_hpt3x3 pdc_adma pata_via pata_sil680 pata_rdc pata_ninja32 pata_netcell pata_marvell pata_jmicron pata_cmd64x pata_ali ata_generic iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic mlx4_en mlx4_core cxgb4vf cxgb4 cxgb3 cxgb cnic ipv6 bnx2x bna be2net sis900 sis190 jme atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8169(O) r8168(O) 8139too 8139cp tg3(O) libphy b44(O) bnx2 mmc_core ssb(O) uio forcedeth ixgbe ixgb igb_new(O) ioatdma e1000e_new(O) e1000 e100 dca pcnet32 amd8111e tulip mdio mii container fan thermal_sys compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi [last unloaded: it913x_fe]
[64440.720342] Pid: 6118, comm: md0_raid1 Tainted: P         C O 3.2.40 #8
[64440.720344] Call Trace:
[64440.720348]  [] ? ata_qc_issue+0x51/0x371
[64440.720351]  [] ? ata_qc_issue+0x51/0x371
[64440.720355]  [] ? warn_slowpath_common+0x78/0x8d
[64440.720359]  [] ? ata_qc_issue+0x51/0x371
[64440.720362]  [] ? ata_qc_reinit+0x6d/0x7d
[64440.720365]  [] ? ata_ioc32+0x15/0x15
[64440.720368]  [] ? ata_scsi_translate+0xda/0x10f
[64440.720371]  [] ? ata_scsi_queuecmd+0x3f/0x70
[64440.720376]  [] ? scsi_dispatch_cmd+0x295/0x2fe
[64440.720379]  [] ? scsi_request_fn+0x4e7/0x516
[64440.720383]  [] ? blk_queue_bio+0x294/0x2b8
[64440.720386]  [] ? generic_make_request+0x91/0xd0
[64440.720389]  [] ? submit_bio+0xa6/0xaf
[64440.720393]  [] ? md_super_write+0x58/0x83
[64440.720396]  [] ? md_update_sb+0x2e6/0x455
[64440.720399]  [] ? md_check_recovery+0x221/0x579
[64440.720403]  [] ? raid1d+0x33/0x1298
[64440.720407]  [] ? need_resched+0x1e/0x28
[64440.720410]  [] ? __schedule+0x515/0x52f
[64440.720414]  [] ? __switch_to+0x142/0x27c
[64440.720417]  [] ? calc_global_load+0x191/0x191
[64440.720420]  [] ? schedule_timeout+0x1e/0xb8
[64440.720424]  [] ? default_spin_lock_flags+0x5/0x9
[64440.720427]  [] ? _raw_spin_lock_irqsave+0x1e/0x27
[64440.720431]  [] ? default_spin_lock_flags+0x5/0x9
[64440.720434]  [] ? _raw_spin_lock_irqsave+0x1e/0x27
[64440.720437]  [] ? md_thread+0xe4/0x102
[64440.720441]  [] ? wake_up_bit+0x22/0x22
[64440.720444]  [] ? md_trim_bio+0x105/0x105
[64440.720447]  [] ? kthread+0x6a/0x72
[64440.720451]  [] ? kernel_thread_helper+0x4/0x10
[64440.720454]  [] ? kthread_bind+0x5c/0x5c
[64440.720457]  [] ? gs_change+0x13/0x13
[64440.720459] ---[ end trace 8e0b7a312ad2c2cc ]---

 

Any suggestions ?

 

Thanks

Try to blacklist r8169 using rmmod GRUB option. Did you load the DVB drivers in /etc/rc.local?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...