andrewdutoit Posted April 14, 2014 Share #826 Posted April 14, 2014 Hi Guys, I am feeling really silly, I am trying to install gnoboot on a Atom d510 board. I downloaded the image and write it to the usb drive with image writer. But as soon as the machine boots up it gets stuck at GRUB Actually it just sits there top left corner "Grub" and goes nowhere I have tried everything... What am I missing? Thanks Andrew Quote Link to comment Share on other sites More sharing options...
mcdull Posted April 15, 2014 Share #827 Posted April 15, 2014 what does it show on screen? It should start to boot if you select some item in the GRUB boot list. Quote Link to comment Share on other sites More sharing options...
falconhk2007 Posted April 15, 2014 Share #828 Posted April 15, 2014 BTW, I have tried MagicPro PCTV Dual USB adaptor on my Xpenology box with 10.5 alpha, the dongle is not recognized by video station. Did you load the drivers in /etc/rc.local? Thanks for your reply. I have added the driver modules into the rc.local #!/bin/sh # Optware setup [ -x /etc/rc.optware ] && /etc/rc.optware start source /etc/rc.subr source /.gnoboot/modules.d/03-wifi.conf source /.gnoboot/modules.d/05-media.conf SYNOLoadModules $WIFI_MOD SYNOLoadModules $MEDIA_MOD SYNOLoadModules $VMWARE exit 0 The lsmod showing the following:- usbcore 158988 32 dvb_usb_nova_t_usb2,dvb_usb_technisat_usb2,dvb_usb_pctv452e,dvb_usb_cinergyT2,ttusb_dec,pvrusb2,em28xx_dvb,em28xx_alsa,em28xx,hdpvr,dvb_ttusb_budget,dvb_usb,snd_usb_audio,snd_usbmidi_lib,zd1211rw,rtl8187,rtl8192cu,rtl_usb,mwifiex_usb,libertas_tf_usb,ar5523,carl9170,ath9k_htc,usbhid,usblp,usb_storage,uhci_hcd,etxhci_hcd,xhci_hcd,ohci_hcd,ehci_hcd But still there is no dvb dongle exist in video station. When I unplug the stick, dmesg shows [ 512.953063] usb 1-2.1: USB disconnect, device number 5 When I plug in the stick, dmesg shows [ 629.320965] usb 1-2.1: new high-speed USB device number 6 using xhci_hcd After plug in the stick, the information under DSM show the following:- USB Stick - Conexant Systems (Rockwell), Inc. Thanks. Hi mcdull, I am using Contex DTV-01 (Conexant Systems) too but cannot get it works in DSM 5.0, are you using DSM5.0 with your Magic Pro PCTV USB? I can use my Contex DTV-01 in DSM 4.3 (same alpha 10.5 image) without any creation of file /etc/rc.local. do you have any idea? Quote Link to comment Share on other sites More sharing options...
mcdull Posted April 15, 2014 Share #829 Posted April 15, 2014 Yes, I am using MagicPro PCTV Dual under 5.0 update 2. It is however, I did not try it under 4.3 as the driver is firsly included in the 10.5 alpha build. Your DTV-01 should be compatible with build-in driver on DSM. Did you see any driver message upon inserting the DTV under dmesg? Quote Link to comment Share on other sites More sharing options...
andrewdutoit Posted April 15, 2014 Share #830 Posted April 15, 2014 what does it show on screen?It should start to boot if you select some item in the GRUB boot list. It only shows the word GRUB (nothing else on the screen) . The boot list never pops up and it just hangs there Quote Link to comment Share on other sites More sharing options...
mcdull Posted April 15, 2014 Share #831 Posted April 15, 2014 if it is a physical machine, you may need to change your BIOS setting to let it boot. Quote Link to comment Share on other sites More sharing options...
ema Posted April 15, 2014 Share #832 Posted April 15, 2014 SSD Cache Hi gno, any news? Thanks! ema Quote Link to comment Share on other sites More sharing options...
chanquete69 Posted April 15, 2014 Share #833 Posted April 15, 2014 SSD CacheHi gno, any news? Thanks! ema I'm interested in this functionailty too. I've read it doesn't work yet Quote Link to comment Share on other sites More sharing options...
blablax Posted April 15, 2014 Share #834 Posted April 15, 2014 Post your *.vmx file, it seems your VM is not using e1000 network card.i add next network card to this VM , and now it works on second one , but first one is still unable to Edit the file, change ethernetX.virtualDev value to "e1000". ethernet0.present = "TRUE" ethernet0.connectionType = "hostonly" ethernet0.virtualDev = "e1000" <---------- ethernet0.wakeOnPcktRcv = "FALSE" ethernet0.addressType = "generated" My next release will include more drivers, watch out for it later this week . Hi All, I am installing gnoboot-alpha-10.5 on a VMware Workstation 9. But i cannot seem to get the networking online. I found the setting (see above) and the daily root password to login (404-0f01) on the console, but vi (or another) text editor is missing... how do i proceed?? Tnx. Quote Link to comment Share on other sites More sharing options...
falconhk2007 Posted April 15, 2014 Share #835 Posted April 15, 2014 Yes, I am using MagicPro PCTV Dual under 5.0 update 2.It is however, I did not try it under 4.3 as the driver is firsly included in the 10.5 alpha build. Your DTV-01 should be compatible with build-in driver on DSM. Did you see any driver message upon inserting the DTV under dmesg? I copied the same content from your /etc/rc.local, the last few rows of dmesg as follows (unplugged and plug in again, end with error -22 in dvb_usb_cxusb) [ 55.168185] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 58.232132] dvb_usb_cxusb: probe of 1-3:1.0 failed with error -22 [ 58.232804] usbcore: registered new interface driver dvb_usb_cxusb [ 180.661859] usb 1-3: USB disconnect, device number 2 [ 180.812444] usbcore: deregistering interface driver dvb_usb_cxusb [ 192.578114] usb 1-3: new high-speed USB device number 4 using ehci_hcd [ 193.017368] dvb_usb_cxusb: probe of 1-3:1.0 failed with error -22 [ 193.017482] usbcore: registered new interface driver dvb_usb_cxusb any idea? the lsmod |grep dvb_usb_cxusb returned dvb_usb_cxusb 64754 0 dib0070 8680 1 dvb_usb_cxusb dib7000p 29487 1 dvb_usb_cxusb dvb_usb 15274 6 dvb_usb_cxusb,dvb_usb_nova_t_usb2,dvb_usb_dibusb _common,dvb_usb_technisat_usb2,dvb_usb_pctv452e,dvb_usb_cinergyT2 usbcore 158988 33 dvb_usb_cxusb,dvb_usb_nova_t_usb2,dvb_usb_techni sat_usb2,dvb_usb_pctv452e,dvb_usb_cinergyT2,ttusb_dec,pvrusb2,em28xx_dvb,em28xx_ alsa,em28xx,hdpvr,dvb_ttusb_budget,dvb_usb,snd_usb_audio,snd_usbmidi_lib,zd1211r w,rtl8187,rtl8192cu,rtl_usb,mwifiex_usb,libertas_tf_usb,ar5523,carl9170,ath9k_ht c,usbhid,usblp,usb_storage,uhci_hcd,etxhci_hcd,xhci_hcd,ohci_hcd,ehci_hcd Quote Link to comment Share on other sites More sharing options...
dark alex Posted April 15, 2014 Share #836 Posted April 15, 2014 I believe this driver is not built in (note: Synologys list doesn't matter! gnoboot replaces synology's Kernel and so it brings its own drivers! Check http://gnoboot.me Unfortunately my TeVii S660 is not yet supportet, too. I hope he can get it running for me as optional module or sth as driver requests for release have been closed yet. Quote Link to comment Share on other sites More sharing options...
cyberdott Posted April 15, 2014 Share #837 Posted April 15, 2014 Still no luck with my PERC H310 on 10.5... But i need 10.5 for Multimedia-Support And I Need my Backup-Volume So maybe It could also be helpfull to crossflash to an LSI 9211-8i firmware!? Someone else here with a n54l/perc h310 baremetal config? Quote Link to comment Share on other sites More sharing options...
vasiliy_gr Posted April 15, 2014 Share #838 Posted April 15, 2014 Still no luck with my PERC H310 on 10.5... But i need 10.5 for Multimedia-Support And I Need my Backup-Volume So maybe It could also be helpfull to crossflash to an LSI 9211-8i firmware!? Someone else here with a n54l/perc h310 baremetal config? I have both perc h310 and n54l in baremetal under gnoboot 10.5. But they are - two different baremetal xpenologies. Seriously speaking I do use h310 reflashed to 8211-8i/IT. Reflash procedure was rather complex. I had to consecutively flash it to latest dell's hba fw, then to 8211/IR and only third was 8211/IT. I used three different tool-chaines (dell's one, official lsi's and lsiutil correspondingly for those three stages). Also I used two different mobos (one with dos environment and other with efi-shell). And also had to cover two pins on pci-e. So I do not know if you can do it inside n54l. But you can try. As for me - I decided not to buy H310 adapters any more, but only original lsi 9211 (or 9240) as I did previously for two other hardware setups. As the little price difference do not excuse the complexity of making it functional. Quote Link to comment Share on other sites More sharing options...
mcdull Posted April 16, 2014 Share #839 Posted April 16, 2014 Post your *.vmx file, it seems your VM is not using e1000 network card.i add next network card to this VM , and now it works on second one , but first one is still unable to Edit the file, change ethernetX.virtualDev value to "e1000". ethernet0.present = "TRUE" ethernet0.connectionType = "hostonly" ethernet0.virtualDev = "e1000" <---------- ethernet0.wakeOnPcktRcv = "FALSE" ethernet0.addressType = "generated" My next release will include more drivers, watch out for it later this week . Hi All, I am installing gnoboot-alpha-10.5 on a VMware Workstation 9. But i cannot seem to get the networking online. I found the setting (see above) and the daily root password to login (404-0f01) on the console, but vi (or another) text editor is missing... how do i proceed?? Tnx. This is the VMX file you need to edit under windows. Quote Link to comment Share on other sites More sharing options...
Raghav_K Posted April 16, 2014 Share #840 Posted April 16, 2014 (edited) *removed* wrong post Edited April 17, 2014 by Guest Quote Link to comment Share on other sites More sharing options...
Rand__ Posted April 16, 2014 Share #841 Posted April 16, 2014 So i am trying to run gnoBoot (latest Alpha 7) on VirtualBox but i cant get it to run. I created a vdi image from the latest vfat (via convertdd) and it boots fine, up until when it starts the daemons ... I tried various settings in VBox but all end up the same... Any idea how to fix this? Thx Quote Link to comment Share on other sites More sharing options...
spammy Posted April 16, 2014 Share #842 Posted April 16, 2014 AFAIK that's working fine - at this stage you use Synology Assistant to actually install DSM. Quote Link to comment Share on other sites More sharing options...
Rand__ Posted April 16, 2014 Share #843 Posted April 16, 2014 Hm SynoAsisst couldnt find the device thats why i looked in the first place;) Is the root pw for this stage known? I've seen quite a lot of failed boot messages but i dont know what they where, maybe normal, maybe not. Tried using the debug boot but that hung after the logo. Quote Link to comment Share on other sites More sharing options...
dark alex Posted April 16, 2014 Share #844 Posted April 16, 2014 Hi first of all please use latets gnoboot version (10.5) you told you are still using alpha 7 To the root PW: It is an automatically generated PW only synology should know. But there are different guides on the internet to calculate it. But I had no luck with it... Quote Link to comment Share on other sites More sharing options...
Rand__ Posted April 16, 2014 Share #845 Posted April 16, 2014 Ah in fact I *am* using alpha 10.5; sorry i called it alpha7 since that was the latest version from trantor i believer which i tried before. I d'led today using the latest link so i am up to date. Root PW - tried but didnt work for me either Quote Link to comment Share on other sites More sharing options...
vasiliy_gr Posted April 16, 2014 Share #846 Posted April 16, 2014 For syno password I used the following code: #include #include #include int gcd(int a, int b) { return (b?gcd(b,a%b):a); } void main() { struct timeval tvTime; struct tm tmOutput,tmOutputUTC; gettimeofday(&tvTime, 0); localtime_r(&(tvTime.tv_sec), &tmOutput); gmtime_r(&(tvTime.tv_sec), &tmOutputUTC); tmOutput.tm_mon += 1; tmOutputUTC.tm_mon += 1; printf("password for today is: %x%02d-%02x%02d\n", tmOutput.tm_mon, tmOutput.tm_mon, tmOutput.tm_mday, gcd(tmOutput.tm_mon, tmOutput.tm_mday)); printf("password for today (UTC) is: %x%02d-%02x%02d\n\n", tmOutputUTC.tm_mon, tmOutputUTC.tm_mon, tmOutputUTC.tm_mday, gcd(tmOutputUTC.tm_mon, tmOutputUTC.tm_mday)); } Compile it and run (I used gcc). Use those password that correspond to the clock settings on target (local or UTC). Quote Link to comment Share on other sites More sharing options...
NisSam Posted April 16, 2014 Share #847 Posted April 16, 2014 For syno password I used the following code: Use those password that correspond to the clock settings on target (local or UTC). The same in perl use strict; use warnings; use Time::gmtime; use Time::localtime; sub gcd { my ($a, $b) = @_; return ( $b ? gcd($b ,$a % $b) : $a); } my $tm = localtime(); my $tmUTC = gmtime (); printf("password for today is: %x%02d-%02x%02d\n" , $tm ->mon() + 1, $tm ->mon() + 1, $tm ->mday(), gcd($tm ->mon() + 1, $tm ->mday())); printf("password for today (UTC) is: %x%02d-%02x%02d\n" , $tmUTC->mon() + 1, $tmUTC->mon() + 1, $tmUTC->mday(), gcd($tmUTC->mon() + 1, $tmUTC->mday())); Run it as perl script_name.pl Just rewrote c code as perl. Havn't checked the generated passwords yet. Quote Link to comment Share on other sites More sharing options...
cyberdott Posted April 16, 2014 Share #848 Posted April 16, 2014 Still no luck with my PERC H310 on 10.5... But i need 10.5 for Multimedia-Support And I Need my Backup-Volume So maybe It could also be helpfull to crossflash to an LSI 9211-8i firmware!? Someone else here with a n54l/perc h310 baremetal config? I have both perc h310 and n54l in baremetal under gnoboot 10.5. But they are - two different baremetal xpenologies. Seriously speaking I do use h310 reflashed to 8211-8i/IT. Reflash procedure was rather complex. I had to consecutively flash it to latest dell's hba fw, then to 8211/IR and only third was 8211/IT. I used three different tool-chaines (dell's one, official lsi's and lsiutil correspondingly for those three stages). Also I used two different mobos (one with dos environment and other with efi-shell). And also had to cover two pins on pci-e. So I do not know if you can do it inside n54l. But you can try. As for me - I decided not to buy H310 adapters any more, but only original lsi 9211 (or 9240) as I did previously for two other hardware setups. As the little price difference do not excuse the complexity of making it functional. So Crossflash works inside N54L Actually P18 is the actually Firmware of my new branded LSI 9211-8i But new Prob Now the esata-Port is detected as Internal Port and no longer as esata...and also the Drive-Ordering is not correct: Actually Config esataportcfg=0x30 internalportcfg=0xfff usbportcfg=0x1FC0 Disk 1 + 2 is from the internal Bay, 3 + 4 empty Slot of the Internal Bay 5-7 ? Port 8 Is from the LSI (External ODD Tray-Bay) Port 9 E-Sata Port 10-12 from the LSI (External ODD Tray-Bay) Port 9 should be estata and not internal... How cann I change This? MaxDisk=12 ? 4 from internal Bay, Port 1-4 8 from LSI, Port 5-12) 2 ESATA (1 odd + 1 real esata) THX! Quote Link to comment Share on other sites More sharing options...
Rand__ Posted April 16, 2014 Share #849 Posted April 16, 2014 Excellent, that works © (used http://codepad.org), thanks guys. Turns out its a network issue after all, Bridged Networking seems to have an issue. Very misleading error though - and an Enhancement request: put the IP right there before the root prompt;) Quote Link to comment Share on other sites More sharing options...
vasiliy_gr Posted April 16, 2014 Share #850 Posted April 16, 2014 Actually Config esataportcfg=0x30 internalportcfg=0xfff usbportcfg=0x1FC0 Disk 1 + 2 is from the internal Bay, 3 + 4 empty Slot of the Internal Bay 5-7 ? Port 8 Is from the LSI (External ODD Tray-Bay) Port 9 E-Sata Port 10-12 from the LSI (External ODD Tray-Bay) Port 9 should be estata and not internal... How cann I change This? MaxDisk=12 ? 4 from internal Bay, Port 1-4 8 from LSI, Port 5-12) 2 ESATA (1 odd + 1 real esata) THX! I think you should eliminate overlap in *portcfg. Try setting both esataportcfg and usbportcfg to zero value. Also expand your internalportcfg to obviously high value (0xfffff for example). If you will find all your hdd-s - ok. If not - try higher MaxDisk settings. After finding all hdd's - reduce internalportcfg value to actual bitmap and increase other *portcfg values to actual values as bitmaps. As for your current settings - they are incorrect. As they have 'one' bits set simultaneously in internalportcfg and two other *portcfg-s. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.