sl0n Posted March 28, 2014 Share #701 Posted March 28, 2014 Hi gnoBoot,I updated from Trantor DSM 4.3 build 3810++ (repack v1.0) to 5.0 (stock DS3612xs 4458 .pat from Synologu) and all went smooth Can you maybe point out your basic steps of the upgrade? I'm looking at upgrading my installtion. Cheers Quote Link to comment Share on other sites More sharing options...
fonix232 Posted March 29, 2014 Share #702 Posted March 29, 2014 Hi all, I'm back gnoboot, great work as usual. Using your latest image with the 5.0-4458 release, it's working fine so far. Only issue I have is that there's no sit0 support, and I can't initiate a tunnel through Hurricane Electric :/ Is there any chance that you could compile it into the next release? You have to load ipv6 module, just google for it Already did so, but no luck. The sit0 device simply does not appear, nor do the commands (IP addresses redacted): ifconfig sit0 up ifconfig sit0 inet6 tunnel ::xxx.xxx.xxx.xxx ifconfig sit1 up ifconfig sit1 inet6 add xxxx:xxxx:xxxx:xxxx::2/64 route -A inet6 add ::/0 dev sit1 modprobe ipv6 ip tunnel add he-ipv6 mode sit remote xxx.xxx.xxx.xxx local xxx.xxx.xxx.xxx ttl 255 ip link set he-ipv6 up ip addr add xxxx:xxxx:xxxx:xxxx::2/64 dev he-ipv6 ip route add ::/0 dev he-ipv6 ip -f inet6 addr The sit0 device simply doesn't exist, and by my knowledge it would require the sit.ko module (which is not compiled by default). Quote Link to comment Share on other sites More sharing options...
T4xus Posted March 29, 2014 Share #703 Posted March 29, 2014 Upgrade from 4.3 Trantor, no data lost, very fast turn on and shut off, all works perfectly except the WOL. Users' permissions were reset that's make me afraid because cannot connect on W7 and understand it was because of that reset 5 minutes later xD TY Gnoboot Quote Link to comment Share on other sites More sharing options...
neonflx Posted March 29, 2014 Share #704 Posted March 29, 2014 I'm running on bare hardware, no Esxi or the likes, how can I update from 10.3 to 10.5 without loosing what i have, thanks Quote Link to comment Share on other sites More sharing options...
neonflx Posted March 29, 2014 Share #705 Posted March 29, 2014 I'm running on bare hardware, no Esxi or the likes, how can I update from 10.3 to 10.5 without loosing what i have, thanks Quote Link to comment Share on other sites More sharing options...
neonflx Posted March 29, 2014 Share #706 Posted March 29, 2014 I'm wondering if this will work correctly with a AsRock C2750D4I.I'll be having mine in a few weeks. I'm running an ASRock E3C224-4L straight in hardware, no esxi and is running sweet Quote Link to comment Share on other sites More sharing options...
neonflx Posted March 29, 2014 Share #707 Posted March 29, 2014 I'm wondering if this will work correctly with a AsRock C2750D4I.I'll be having mine in a few weeks. I'm running an ASRock E3C224-4L straight in hardware, no esxi and is running sweet Quote Link to comment Share on other sites More sharing options...
neonflx Posted March 29, 2014 Share #708 Posted March 29, 2014 I'm running on bare hardware, no Esxi or the likes, how can I update from 10.3 to 10.5 without loosing what i have, thanks Quote Link to comment Share on other sites More sharing options...
gnoboot Posted March 29, 2014 Author Share #709 Posted March 29, 2014 I'm running on bare hardware, no Esxi or the likes, how can I update from 10.3 to 10.5 without loosing what i have, thanks Just replace the zImage, revert as needed. Hi all, I'm back gnoboot, great work as usual. Using your latest image with the 5.0-4458 release, it's working fine so far. Only issue I have is that there's no sit0 support, and I can't initiate a tunnel through Hurricane Electric :/ Is there any chance that you could compile it into the next release? You have to load ipv6 module, just google for it Already did so, but no luck. The sit0 device simply does not appear, nor do the commands (IP addresses redacted): ifconfig sit0 up ifconfig sit0 inet6 tunnel ::xxx.xxx.xxx.xxx ifconfig sit1 up ifconfig sit1 inet6 add xxxx:xxxx:xxxx:xxxx::2/64 route -A inet6 add ::/0 dev sit1 modprobe ipv6 ip tunnel add he-ipv6 mode sit remote xxx.xxx.xxx.xxx local xxx.xxx.xxx.xxx ttl 255 ip link set he-ipv6 up ip addr add xxxx:xxxx:xxxx:xxxx::2/64 dev he-ipv6 ip route add ::/0 dev he-ipv6 ip -f inet6 addr The sit0 device simply doesn't exist, and by my knowledge it would require the sit.ko module (which is not compiled by default). Do you know the kernel config to enable? Quote Link to comment Share on other sites More sharing options...
marc_al Posted March 29, 2014 Share #710 Posted March 29, 2014 (edited) Hello, I have managed to mount a ISCSI target but I have one problem The ISCSI share doesn't appear on the storage management as a normal hard drive. Is it possible to make it or am I missing something? Thank you Marc Here is what I did Modify the line node.startup vi /etc/iscsi/iscsid.conf node.startup = automatic 1) Start he daemon /usr/syno/etc/rc.iscsi start 2) Find the name of the target (192.168.1.4 : IP of the Iscsi target)- iscsiadm -m discovery -t sendtargets -p 192.168.1.4 Returns the value iqn.2007-09.jp.ne.peach.istgt:disk0 (name of the target) 3) Connect the target iscsiadm --mode node --targetname iqn.2007-09.jp.ne.peach.istgt:disk0 --portal 192.168.1.4:3260 --login This will create a device /dev/isda 4) Create a partition (with sfdisk so it will be GPT and more than 2To will be possible) sfdisk -N1 -z-1 -o8 -t83 /dev/isda 5) Format the partition mkfs.ext4 /dev/isda1 6) Mount in volume1 mount /dev/isda1 /volume1 When the syno restarts you must mount again the ISCSI drive so I have created a file /usr/syno/etc.defaults/rc.d/S99SynoISCSI.sh and I have put the lines /usr/syno/etc/rc.iscsi start iscsiadm --mode node --targetname iqn.2007-09.jp.ne.peach.istgt:disk0 --portal 192.168.1.4:3260 --login mount /dev/isda1 /volume1 so when the syno starts the ISCSI is auto mounted EDIT : Solved the problem with the 2Go partition Edited March 30, 2014 by Guest Quote Link to comment Share on other sites More sharing options...
jamesah2008 Posted March 29, 2014 Share #711 Posted March 29, 2014 Everything seems to be working like a charm on the gen8 microserver with alpha 10 Quote Link to comment Share on other sites More sharing options...
htpcdude Posted March 29, 2014 Share #712 Posted March 29, 2014 I have a strange problem running gnoboot-alpha-10.4 with DSM 5.0-4458 on a Gigabyte GA-H87M-HD3. Either warm or cold booting the unit, I will lose LAN connectivity while it's staring services, maybe 5 to 10 minutes after boot. Unplugging and re-inserting the ethernet cable will restore LAN access. It continues to stay up, the longest I've left it alone has been 12hrs. I can transfer files and was also able to update to DSM 5.0-4458 Update 1. Quote Link to comment Share on other sites More sharing options...
Varashi Posted March 30, 2014 Share #713 Posted March 30, 2014 I'm having some issues with the SSD caching. Runing gnoboot 10.4 with 4458 update 1 When creating a read-write SSD cache, the message "system failed to mount ssd cache ...." The following appears in /var/log/messages: Mar 30 01:20:54 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:20:54 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:20:54 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Mar 30 01:22:00 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac Mar 30 01:22:00 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Mar 30 01:22:00 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:22:00 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:22:00 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Mar 30 01:22:51 SKW-SAN synocheckshare: synocheckshare_vol_mount.c:47 Export Share [iNTERNAL] [/dev/vg1/volume_1] [/volume1] Mar 30 01:22:52 SKW-SAN cupsd[28626]: [conf.c:1893] Filter "pstoraster" not found. Mar 30 01:22:59 SKW-SAN synoindex: index_index_add_ex.c:125 Indexing daemon is not running Mar 30 01:23:18 SKW-SAN flashcachehandler.cgi: space_ssd_cache_disk_init.c:71 [iNFO] Clean all partitions of [/dev/sde] Mar 30 01:23:18 SKW-SAN flashcachehandler.cgi: space_ssd_cache_disk_init.c:79 [iNFO] Create [/dev/sde1] Mar 30 01:23:18 SKW-SAN flashcachehandler.cgi: space_ssd_cache_disk_init.c:71 [iNFO] Clean all partitions of [/dev/sdf] Mar 30 01:23:18 SKW-SAN flashcachehandler.cgi: space_ssd_cache_disk_init.c:79 [iNFO] Create [/dev/sdf1] killall: synolunbkp: no process killed Mar 30 01:23:24 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac Mar 30 01:23:24 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Mar 30 01:23:24 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:23:24 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:23:24 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Mar 30 01:23:25 SKW-SAN kernel: [ 1258.355767] EXT_INFO: EXIT Extent-Pool Mar 30 01:23:26 SKW-SAN kernel: [ 1259.026918] init: crond main process (16962) killed by TERM signal Mar 30 01:23:30 SKW-SAN synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [iNTERNAL] [/dev/vg1/volume_1] [/volume1] Mar 30 01:23:31 SKW-SAN flashcachehandler.cgi: flashcache_create.c:130 failed to [/usr/syno/sbin/flashcache_create -s 57671680k -p back cachedev_0 /dev/md4 /dev/vg1/volume_1 1>/tmp/flashcache.system 2>&1], errno=No such file or directory, ret=256, WEXITSTATUS=1 Mar 30 01:23:31 SKW-SAN flashcachehandler.cgi: virtual_space_implement_op_lib.c:172 Failed to create layer on device [/dev/vg1/volume_1] of space [/dev/vg1/volume_1], ret=-1 Mar 30 01:23:31 SKW-SAN flashcachehandler.cgi: vspace_wrapper_create.c:77 failed to create virtual space on [/volume1] Mar 30 01:23:31 SKW-SAN synocheckshare: synocheckshare_vol_mount.c:47 Export Share [iNTERNAL] [/dev/vg1/volume_1] [/volume1] Mar 30 01:23:32 SKW-SAN cupsd[30809]: [conf.c:1893] Filter "pstoraster" not found. Mar 30 01:23:32 SKW-SAN synorelayd: register_api_key.cpp:226 failed to send https request to [apiauth.synology.com], err=[0x2000] Mar 30 01:23:32 SKW-SAN synorelayd[31054]: synorelayd.cpp:1221 stoped Mar 30 01:23:32 SKW-SAN isccore: synocomm_types.c:268 szName eth0 10.2.0.4 is Active Mar 30 01:23:32 SKW-SAN isccore: synocomm_types.c:268 szName eth0 10.2.0.4 is Active Mar 30 01:23:32 SKW-SAN isccore: synocomm_types.c:268 szName eth1 10.3.0.4 is Active Mar 30 01:23:32 SKW-SAN isccore: synocomm_types.c:268 szName eth2 172.16.2.1 is Active Mar 30 01:23:33 SKW-SAN iss: synocomm_types.c:268 szName eth0 10.2.0.4 is Active Mar 30 01:23:33 SKW-SAN iss: synocomm_types.c:268 szName eth0 10.2.0.4 is Active Mar 30 01:23:33 SKW-SAN iss: synocomm_types.c:268 szName eth1 10.3.0.4 is Active Mar 30 01:23:33 SKW-SAN iss: synocomm_types.c:268 szName eth2 172.16.2.1 is Active Mar 30 01:23:33 SKW-SAN kernel: [ 1266.176294] EXT_INFO: INIT Extent-Pool Mar 30 01:23:36 SKW-SAN flashcachehandler.cgi: flashcachehandler.cpp:238 Failed to create flashcache on /volume1 [0xEB00 servicecfg_internal_lib.c:104] Mar 30 01:23:36 SKW-SAN kernel: [ 1269.215393] md: md4: set sdf1 to auto_remap [0] Mar 30 01:23:36 SKW-SAN kernel: [ 1269.215394] md: md4: set sde1 to auto_remap [0] Mar 30 01:23:36 SKW-SAN flashcachehandler.cgi: raid_remove.c:48 [info] clean RAID superblock of /dev/md4 Mar 30 01:23:37 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sde1' Mar 30 01:23:37 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sdf1' Mar 30 01:23:43 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac Mar 30 01:23:43 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Mar 30 01:23:43 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:23:43 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:23:43 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Mar 30 01:23:43 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac Mar 30 01:23:43 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Mar 30 01:23:43 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:23:43 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:23:43 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Quote Link to comment Share on other sites More sharing options...
Varashi Posted March 30, 2014 Share #714 Posted March 30, 2014 edit: bizarre... forum erroring out but still posting the post... Quote Link to comment Share on other sites More sharing options...
maccert Posted March 30, 2014 Share #715 Posted March 30, 2014 is trantor still alive? have not heard from him a while. gr marc Quote Link to comment Share on other sites More sharing options...
neonflx Posted March 30, 2014 Share #716 Posted March 30, 2014 where do i get the latest alpha? the link still points to 10.4 thanks Quote Link to comment Share on other sites More sharing options...
htpcdude Posted March 30, 2014 Share #717 Posted March 30, 2014 where do i get the latest alpha? the link still points to 10.4 thanks That is the latest alpha. Under the notes for alpha 10.5, it says work in progress. Quote Link to comment Share on other sites More sharing options...
vasiliy_gr Posted March 30, 2014 Share #718 Posted March 30, 2014 Checked with irqpoll boot parameter. 15 hours of runtime. No problem with irq 16 in dmesg. So it shall be the problem you imply. Let me know if ever you still get kernel traceback. So I can include the patch for 10.5. 34 hours of runtime: [spoiler=][123490.605535] irq 16: nobody cared (try booting with the "irqpoll" option) [123490.605540] Pid: 0, comm: swapper/0 Tainted: P C O 3.2.40 #6 [123490.605543] Call Trace: [123490.605545] [] ? __report_bad_irq+0x2c/0xb4 [123490.605556] [] ? note_interrupt+0x15d/0x1b7 [123490.605560] [] ? handle_irq_event_percpu+0xfa/0x117 [123490.605564] [] ? handle_irq_event+0x48/0x70 [123490.605569] [] ? handle_fasteoi_irq+0x74/0xae [123490.605572] [] ? handle_irq+0x87/0x90 [123490.605576] [] ? do_IRQ+0x48/0x9f [123490.605580] [] ? common_interrupt+0x6e/0x6e [123490.605582] [] ? lapic_next_event+0x10/0x15 [123490.605590] [] ? IO_APIC_get_PCI_irq_vector+0x1c7/0x1c7 [123490.605595] [] ? intel_idle+0xd6/0x10c [123490.605598] [] ? intel_idle+0xb6/0x10c [123490.605603] [] ? cpuidle_idle_call+0x6d/0xb4 [123490.605607] [] ? cpu_idle+0x60/0x8c [123490.605612] [] ? start_kernel+0x327/0x333 [123490.605617] [] ? early_idt_handlers+0x140/0x140 [123490.605621] [] ? x86_64_start_kernel+0x10b/0x118 [123490.605623] handlers: [123490.605639] [] usb_hcd_irq [123490.605642] Disabling IRQ #16 And to be sure on irqpoll: [spoiler=]XPEnologyU> dmesg |grep irqpoll [ 0.000000] Command line: irqpoll [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=1 netif_num=4 syno_hw_version=DS3612xs irqpoll [123490.605535] irq 16: nobody cared (try booting with the "irqpoll" option) Quote Link to comment Share on other sites More sharing options...
stich86 Posted March 31, 2014 Share #719 Posted March 31, 2014 hello guys, i'm running the last alpha-10.4 and DSM 5.0 update1 but i've understood how to update the gnoBoot Disk. Just change the VMDK and leave the other one intact? Thanks Quote Link to comment Share on other sites More sharing options...
gnoboot Posted March 31, 2014 Author Share #720 Posted March 31, 2014 I have a strange problem running gnoboot-alpha-10.4 with DSM 5.0-4458 on a Gigabyte GA-H87M-HD3. Either warm or cold booting the unit, I will lose LAN connectivity while it's staring services, maybe 5 to 10 minutes after boot. Unplugging and re-inserting the ethernet cable will restore LAN access. It continues to stay up, the longest I've left it alone has been 12hrs. I can transfer files and was also able to update to DSM 5.0-4458 Update 1. dmesg or lspci? I'm having some issues with the SSD caching. Runing gnoboot 10.4 with 4458 update 1 When creating a read-write SSD cache, the message "system failed to mount ssd cache ...." The following appears in /var/log/messages: Mar 30 01:20:54 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:20:54 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:20:54 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Mar 30 01:22:00 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac Mar 30 01:22:00 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Mar 30 01:22:00 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:22:00 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:22:00 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Mar 30 01:22:51 SKW-SAN synocheckshare: synocheckshare_vol_mount.c:47 Export Share [iNTERNAL] [/dev/vg1/volume_1] [/volume1] Mar 30 01:22:52 SKW-SAN cupsd[28626]: [conf.c:1893] Filter "pstoraster" not found. Mar 30 01:22:59 SKW-SAN synoindex: index_index_add_ex.c:125 Indexing daemon is not running Mar 30 01:23:18 SKW-SAN flashcachehandler.cgi: space_ssd_cache_disk_init.c:71 [iNFO] Clean all partitions of [/dev/sde] Mar 30 01:23:18 SKW-SAN flashcachehandler.cgi: space_ssd_cache_disk_init.c:79 [iNFO] Create [/dev/sde1] Mar 30 01:23:18 SKW-SAN flashcachehandler.cgi: space_ssd_cache_disk_init.c:71 [iNFO] Clean all partitions of [/dev/sdf] Mar 30 01:23:18 SKW-SAN flashcachehandler.cgi: space_ssd_cache_disk_init.c:79 [iNFO] Create [/dev/sdf1] killall: synolunbkp: no process killed Mar 30 01:23:24 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac Mar 30 01:23:24 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Mar 30 01:23:24 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:23:24 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:23:24 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Mar 30 01:23:25 SKW-SAN kernel: [ 1258.355767] EXT_INFO: EXIT Extent-Pool Mar 30 01:23:26 SKW-SAN kernel: [ 1259.026918] init: crond main process (16962) killed by TERM signal Mar 30 01:23:30 SKW-SAN synocheckshare: synocheckshare_vol_unmount.c:147 Unmount Share [iNTERNAL] [/dev/vg1/volume_1] [/volume1] Mar 30 01:23:31 SKW-SAN flashcachehandler.cgi: flashcache_create.c:130 failed to [/usr/syno/sbin/flashcache_create -s 57671680k -p back cachedev_0 /dev/md4 /dev/vg1/volume_1 1>/tmp/flashcache.system 2>&1], errno=No such file or directory, ret=256, WEXITSTATUS=1 Mar 30 01:23:31 SKW-SAN flashcachehandler.cgi: virtual_space_implement_op_lib.c:172 Failed to create layer on device [/dev/vg1/volume_1] of space [/dev/vg1/volume_1], ret=-1 Mar 30 01:23:31 SKW-SAN flashcachehandler.cgi: vspace_wrapper_create.c:77 failed to create virtual space on [/volume1] Mar 30 01:23:31 SKW-SAN synocheckshare: synocheckshare_vol_mount.c:47 Export Share [iNTERNAL] [/dev/vg1/volume_1] [/volume1] Mar 30 01:23:32 SKW-SAN cupsd[30809]: [conf.c:1893] Filter "pstoraster" not found. Mar 30 01:23:32 SKW-SAN synorelayd: register_api_key.cpp:226 failed to send https request to [apiauth.synology.com], err=[0x2000] Mar 30 01:23:32 SKW-SAN synorelayd[31054]: synorelayd.cpp:1221 stoped Mar 30 01:23:32 SKW-SAN isccore: synocomm_types.c:268 szName eth0 10.2.0.4 is Active Mar 30 01:23:32 SKW-SAN isccore: synocomm_types.c:268 szName eth0 10.2.0.4 is Active Mar 30 01:23:32 SKW-SAN isccore: synocomm_types.c:268 szName eth1 10.3.0.4 is Active Mar 30 01:23:32 SKW-SAN isccore: synocomm_types.c:268 szName eth2 172.16.2.1 is Active Mar 30 01:23:33 SKW-SAN iss: synocomm_types.c:268 szName eth0 10.2.0.4 is Active Mar 30 01:23:33 SKW-SAN iss: synocomm_types.c:268 szName eth0 10.2.0.4 is Active Mar 30 01:23:33 SKW-SAN iss: synocomm_types.c:268 szName eth1 10.3.0.4 is Active Mar 30 01:23:33 SKW-SAN iss: synocomm_types.c:268 szName eth2 172.16.2.1 is Active Mar 30 01:23:33 SKW-SAN kernel: [ 1266.176294] EXT_INFO: INIT Extent-Pool Mar 30 01:23:36 SKW-SAN flashcachehandler.cgi: flashcachehandler.cpp:238 Failed to create flashcache on /volume1 [0xEB00 servicecfg_internal_lib.c:104] Mar 30 01:23:36 SKW-SAN kernel: [ 1269.215393] md: md4: set sdf1 to auto_remap [0] Mar 30 01:23:36 SKW-SAN kernel: [ 1269.215394] md: md4: set sde1 to auto_remap [0] Mar 30 01:23:36 SKW-SAN flashcachehandler.cgi: raid_remove.c:48 [info] clean RAID superblock of /dev/md4 Mar 30 01:23:37 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sde1' Mar 30 01:23:37 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sdf1' Mar 30 01:23:43 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac Mar 30 01:23:43 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Mar 30 01:23:43 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:23:43 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:23:43 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Mar 30 01:23:43 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac Mar 30 01:23:43 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Mar 30 01:23:43 SKW-SAN hotplugd: ##### ACTION:add Mar 30 01:23:43 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000 Mar 30 01:23:43 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. [/quote Not sure, though, your SSD must be supported or listed to vendor's flash cache. I'll have dig more on your issue. @vasiliy_gr I'll patch 10.5 and try again. Have your tried Debian Wheezy using kernel 3.2 on this machine? Quote Link to comment Share on other sites More sharing options...
Varashi Posted March 31, 2014 Share #721 Posted March 31, 2014 Just for reference, I'm using two OCZ Vertex2s of 60GB (don't ask, they were spares ) Quote Link to comment Share on other sites More sharing options...
fma965 Posted March 31, 2014 Share #722 Posted March 31, 2014 Don't forget to click ads to support my development and I'm also accepting donations . Asking people to click your Ads is against ad companies terms and conditions. Quote Link to comment Share on other sites More sharing options...
gnoboot Posted March 31, 2014 Author Share #723 Posted March 31, 2014 Asking people to click your Ads is against ad companies terms and conditions. Yeah, just read it the other day. That's why I've cleanup the comments section. This also the same to using a custom pat file which is against the vendor license terms. Quote Link to comment Share on other sites More sharing options...
htpcdude Posted March 31, 2014 Share #724 Posted March 31, 2014 (edited) I have a strange problem running gnoboot-alpha-10.4 with DSM 5.0-4458 on a Gigabyte GA-H87M-HD3. Either warm or cold booting the unit, I will lose LAN connectivity while it's staring services, maybe 5 to 10 minutes after boot. Unplugging and re-inserting the ethernet cable will restore LAN access. It continues to stay up, the longest I've left it alone has been 12hrs. I can transfer files and was also able to update to DSM 5.0-4458 Update 1. dmesg or lspci? From what I can tell, the GA-H87M-HD3 has a Realtek 8111F NIC I also have the dmesg but it won't fit in one post. lspci DS> lspci -vvv 00:00.0 Class 0600: Device 8086:0c00 (rev 06) Subsystem: Device 1458:5000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:02.0 Class 0300: Device 8086:0402 (rev 06) Subsystem: Device 1458:d000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=3] Expansion ROM at [disabled] Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- 00:03.0 Class 0403: Device 8086:0c0c (rev 06) Subsystem: Device 8086:2010 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- 00:14.0 Class 0c03: Device 8086:8c31 (rev 04) (prog-if 30) Subsystem: Device 1458:5007 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=64K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0100c Data: 4169 Kernel driver in use: xhci_hcd 00:16.0 Class 0780: Device 8086:8c3a (rev 04) Subsystem: Device 1458:1c3a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f051f000 (64-bit, non-prefetchable) [size=1] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 00:16.3 Class 0700: Device 8086:8c3d (rev 04) (prog-if 02) Subsystem: Device 1458:1c3a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at f0c0 [size=1] Region 1: Memory at f051d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: serial 00:1a.0 Class 0c03: Device 8086:8c2d (rev 04) (prog-if 20) Subsystem: Device 1458:5006 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f051c000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1b.0 Class 0403: Device 8086:8c20 (rev 04) Subsystem: Device 1458:a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 3 Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=2 ArbSelect=Fixed TC/VC=04 Status: NegoPending- InProgress- 00:1c.0 Class 0604: Device 8086:8c10 (rev d4) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM not supported, Exit Latency L0s <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Via WAKE# ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Device 1458:5001 Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:1c.2 Class 0604: Device 8086:8c14 (rev d4) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f0400000-f04fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #2, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Device 1458:5001 Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00:1c.3 Class 0604: Device 8086:244e (rev d4) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #3, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Device 1458:5001 Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 Class 0c03: Device 8086:8c26 (rev 04) (prog-if 20) Subsystem: Device 1458:5006 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f051b000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1f.0 Class 0601: Device 8086:8c4a (rev 04) Subsystem: Device 1458:5001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:1f.2 Class 0106: Device 8086:8c02 (rev 04) (prog-if 01) Subsystem: Device 1458:b005 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at f0b0 [size=1] Region 1: I/O ports at f0a0 [size=1] Region 2: I/O ports at f090 [size=1] Region 3: I/O ports at f080 [size=1] Region 4: I/O ports at f060 [size=2] Region 5: Memory at f051a000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0100c Data: 4159 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Kernel driver in use: ahci 00:1f.3 Class 0c05: Device 8086:8c22 (rev 04) Subsystem: Device 1458:5001 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 11 Region 0: Memory at f0519000 (64-bit, non-prefetchable) [disabled] [size=11] Region 4: I/O ports at f040 [size=2] 02:00.0 Class 0200: Device 10ec:8168 (rev 06) Subsystem: Device 1458:e000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at e000 [size=11] Region 2: Memory at f0404000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4161 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend+ LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data No end tag found Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 03:00.0 Class 0604: Device 8086:244e (rev 41) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=03, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [90] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] Subsystem: Device 1458:8892 Edited March 31, 2014 by Guest Quote Link to comment Share on other sites More sharing options...
gnoboot Posted March 31, 2014 Author Share #725 Posted March 31, 2014 Kernel driver in use: r8168 There's already workaround posted in my blog. You have to rmmod GRUB option r8169_new. Have you tried that already? kernel /zImage rmmod=r8169,r8169_new Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.