Jump to content
XPEnology Community

XPEnology gnoBoot


gnoboot

Recommended Posts

Hi, got a new problem on alpha 10 (not 10.1, not 10.2) running Trantor's DSM 5 Beta

 

hen I connect my TeVii DVB-S2 Device dmesg returns the following fault:

(disconnected to reconnect again for showing the errors)[58730.394048] usb 1-1: USB disconnect, device number 2
(other issue) [58757.123588] dsmnotify.cgi[22343]: segfault at 0 ip 000000000804c3c6 sp 00000000ff868870 error 6
[58757.210226] usb 1-1: new high-speed USB device number 3 using ehci_hcd
[58757.646078] Got empty serial number. Generate serial number from product.
[58758.068154] dvb_core: Unknown symbol __refrigerator (err 0)
[58758.121517] dvb_usb: Unknown symbol dvb_dmxdev_init (err 0)
[58758.121595] dvb_usb: Unknown symbol dvb_register_adapter (err 0)
[58758.121657] dvb_usb: Unknown symbol dvb_dmx_swfilter_204 (err 0)
[58758.121676] dvb_usb: Unknown symbol dvb_dmx_release (err 0)
[58758.121723] dvb_usb: Unknown symbol dvb_net_init (err 0)
[58758.121741] dvb_usb: Unknown symbol dvb_dmx_swfilter (err 0)
[58758.121764] dvb_usb: Unknown symbol dvb_dmxdev_release (err 0)
[58758.121785] dvb_usb: Unknown symbol dvb_dmx_swfilter_raw (err 0)
[58758.121806] dvb_usb: Unknown symbol dvb_frontend_detach (err 0)
[58758.121825] dvb_usb: Unknown symbol dvb_net_release (err 0)
[58758.121849] dvb_usb: Unknown symbol dvb_unregister_frontend (err 0)
[58758.121879] dvb_usb: Unknown symbol dvb_register_frontend (err 0)
[58758.121900] dvb_usb: Unknown symbol dvb_unregister_adapter (err 0)
[58758.121918] dvb_usb: Unknown symbol dvb_dmx_init (err 0)
[58758.165113] stv0299: Unknown symbol timeval_usec_diff (err 0)
[58758.165149] stv0299: Unknown symbol dvb_frontend_sleep_until (err 0)
[58758.342821] dvb_usb_dw2102: Unknown symbol dvb_usb_generic_rw (err 0)
[58758.342884] dvb_usb_dw2102: Unknown symbol dvb_usb_device_init (err 0)
[58758.342905] dvb_usb_dw2102: Unknown symbol dvb_usb_device_exit (err 0)
DSM>

Link to comment
Share on other sites

Hi, got a new problem on alpha 10 (not 10.1, not 10.2) running Trantor's DSM 5 Beta

 

hen I connect my TeVii DVB-S2 Device dmesg returns the following fault:

(disconnected to reconnect again for showing the errors)[58730.394048] usb 1-1: USB disconnect, device number 2
(other issue) [58757.123588] dsmnotify.cgi[22343]: segfault at 0 ip 000000000804c3c6 sp 00000000ff868870 error 6
[58757.210226] usb 1-1: new high-speed USB device number 3 using ehci_hcd
[58757.646078] Got empty serial number. Generate serial number from product.
[58758.068154] dvb_core: Unknown symbol __refrigerator (err 0)
[58758.121517] dvb_usb: Unknown symbol dvb_dmxdev_init (err 0)
[58758.121595] dvb_usb: Unknown symbol dvb_register_adapter (err 0)
[58758.121657] dvb_usb: Unknown symbol dvb_dmx_swfilter_204 (err 0)
[58758.121676] dvb_usb: Unknown symbol dvb_dmx_release (err 0)
[58758.121723] dvb_usb: Unknown symbol dvb_net_init (err 0)
[58758.121741] dvb_usb: Unknown symbol dvb_dmx_swfilter (err 0)
[58758.121764] dvb_usb: Unknown symbol dvb_dmxdev_release (err 0)
[58758.121785] dvb_usb: Unknown symbol dvb_dmx_swfilter_raw (err 0)
[58758.121806] dvb_usb: Unknown symbol dvb_frontend_detach (err 0)
[58758.121825] dvb_usb: Unknown symbol dvb_net_release (err 0)
[58758.121849] dvb_usb: Unknown symbol dvb_unregister_frontend (err 0)
[58758.121879] dvb_usb: Unknown symbol dvb_register_frontend (err 0)
[58758.121900] dvb_usb: Unknown symbol dvb_unregister_adapter (err 0)
[58758.121918] dvb_usb: Unknown symbol dvb_dmx_init (err 0)
[58758.165113] stv0299: Unknown symbol timeval_usec_diff (err 0)
[58758.165149] stv0299: Unknown symbol dvb_frontend_sleep_until (err 0)
[58758.342821] dvb_usb_dw2102: Unknown symbol dvb_usb_generic_rw (err 0)
[58758.342884] dvb_usb_dw2102: Unknown symbol dvb_usb_device_init (err 0)
[58758.342905] dvb_usb_dw2102: Unknown symbol dvb_usb_device_exit (err 0)
DSM>

Try alpha8 that has multimedia support enabled.

Link to comment
Share on other sites

Something big is coming in the next few days...

[spoiler=]Click the ADs on my blog or email me for donation. Enjoy!

 

that's great~ is the big things shift from alpha version to beta version??

 

i have a question would like to ask.

 

is there any different for tigon3 driver between 10.0 and 10.1/10.2 ??

according to your change log, 10.0 is already used tg3_new and my broadcom Lan card can use it without any problems,

however in 10.1 and 10.2, no lan card driver is available for the same hardware. it work again having kernel parameter rmmod=tg3_new insmod=tg3

but i suppose my lan card can use tg3_new (according to 10.0 experience) , so i just curious ... is the tg3_new missed in 10.1 or 10.2 ?

Link to comment
Share on other sites

i have a new idea

according to this post

http://xpenology.com/forum/viewtopic.php?f=2&t=889

 

it is possible to incorporate the ACPI support so that we can power off by physical power button.

using the power button to call "shutdown -h now" or the syno_poweroff_feasible_check + syno_poweroff_task script

it would be convenience when testing the machine. (although it may not be necessary when the machine started in use for 24/7 )

Link to comment
Share on other sites

i have a new idea

according to this post

http://xpenology.com/forum/viewtopic.php?f=2&t=889

 

it is possible to incorporate the ACPI support so that we can power off by physical power button.

using the power button to call "shutdown -h now" or the syno_poweroff_feasible_check + syno_poweroff_task script

it would be convenience when testing the machine. (although it may not be necessary when the machine started in use for 24/7 )

 

It's already supported on alpha10.2 (i.e. /proc/acpi/event), see changelog at my blog:)

 

that's great~ is the big things shift from alpha version to beta version??

 

i have a question would like to ask.

 

is there any different for tigon3 driver between 10.0 and 10.1/10.2 ??

according to your change log, 10.0 is already used tg3_new and my broadcom Lan card can use it without any problems,

however in 10.1 and 10.2, no lan card driver is available for the same hardware. it work again having kernel parameter rmmod=tg3_new insmod=tg3

but i suppose my lan card can use tg3_new (according to 10.0 experience) , so i just curious ... is the tg3_new missed in 10.1 or 10.2 ?

 

Well, just always check my blog to see what it is. :wink:

 

I missed the new tigon driver somehow during my build. So workaround is `insmod /lib/modules/tg3_new.ko` in /etc/rc.local, or add 'insmod=tg3' GRUB option if you are installing to a new machine.

Link to comment
Share on other sites

May I have the zImage file without rd.gz included?

I need to make some change in rd.gz file,

but after a7,

you combined the two files,

so,would you please send me the zImage file?

 

I'd also prefer if gnoboot was that way. All in zImage makes it impossible for us to edit anything in rd.gz.

Link to comment
Share on other sites

Something big is coming in the next few days...

[spoiler=]Click the ADs on my blog or email me for donation. Enjoy!

 

You will work closely with Trantor to provide the next releases by joining your effort?

 

A click on the top... a click on the left... a click in the middle... :wink:

Link to comment
Share on other sites

After recovering my volume today I did some testing with gnoboot_10.2 and VTd passthrough of my LSI 9201-8i. I seem to be getting pretty decent read/write speeds just copying files from folder to folder in DSM. Pretty much ~150MB/s + on both read and write at same time.

 

S1rObuC.png

 

The first 3 peaks are 3 smaller files, then I found a 20GB movie to copy, which is the last peak.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...