Jump to content
XPEnology Community

XPEnology gnoBoot


gnoboot

Recommended Posts

hi !

 

Could it be use in virtual box ?

I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files.

Other then that, it boot and then shuntdown ...

Cannot go into the DSM system page ...

 

I also rewrite the alpha7.img, but still fail to boot ...

 

 

Thanks...

Link to comment
Share on other sites

hi !

 

Could it be use in virtual box ?

I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files.

Other then that, it boot and then shuntdown ...

Cannot go into the DSM system page ...

 

I also rewrite the alpha7.img, but still fail to boot ...

 

 

Thanks...

Link to comment
Share on other sites

hi !

 

Could it be use in virtual box ?

I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files.

Other then that, it boot and then shuntdown ...

Cannot go into the DSM system page ...

 

I also rewrite the alpha7.img, but still fail to boot ...

 

 

Thanks...

 

hmmmm, it's known issue in virtual machines. Are you using AMD cpu?

Link to comment
Share on other sites

hi !

 

Could it be use in virtual box ?

I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files.

Other then that, it boot and then shuntdown ...

Cannot go into the DSM system page ...

 

I also rewrite the alpha7.img, but still fail to boot ...

 

 

Thanks...

 

hmmmm, it's known issue in virtual machines. Are you using AMD cpu?

Link to comment
Share on other sites

hi !

 

Could it be use in virtual box ?

I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files.

Other then that, it boot and then shuntdown ...

Cannot go into the DSM system page ...

 

I also rewrite the alpha7.img, but still fail to boot ...

 

 

Thanks...

 

hmmmm, it's known issue in virtual machines. Are you using AMD cpu?

 

 

Yes, HP N40L

Link to comment
Share on other sites

hi !

 

Could it be use in virtual box ?

I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files.

Other then that, it boot and then shuntdown ...

Cannot go into the DSM system page ...

 

I also rewrite the alpha7.img, but still fail to boot ...

 

 

Thanks...

 

hmmmm, it's known issue in virtual machines. Are you using AMD cpu?

 

 

Yes, HP N40L

Link to comment
Share on other sites

hi !

 

Could it be use in virtual box ?

I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files.

Other then that, it boot and then shuntdown ...

Cannot go into the DSM system page ...

 

I also rewrite the alpha7.img, but still fail to boot ...

 

 

Thanks...

 

hmmmm, it's known issue in virtual machines. Are you using AMD cpu?

 

 

Yes, HP N40L

 

Oh ...

It work la!!

It is a problem on SCSI hdd setting, set back the data disk to sata is ok..

 

Thank you gnoboot ...

Link to comment
Share on other sites

hi !

 

Could it be use in virtual box ?

I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files.

Other then that, it boot and then shuntdown ...

Cannot go into the DSM system page ...

 

I also rewrite the alpha7.img, but still fail to boot ...

 

 

Thanks...

 

hmmmm, it's known issue in virtual machines. Are you using AMD cpu?

 

 

Yes, HP N40L

 

Oh ...

It work la!!

It is a problem on SCSI hdd setting, set back the data disk to sata is ok..

 

Thank you gnoboot ...

Link to comment
Share on other sites

I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)...

Could you pm me the dmesg or `lspci -vvv` output from alpha5 and alpha7?

I can post the output from alpha5 first. Output from alpha7 will be provided later...

 

00:00.0 Class 0600: Device 1022:9601
       Subsystem: Device 103c:1609
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0
       Capabilities: [c4] HyperTransport: Slave or Primary Interface
               Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
               Link Control 0: CFlE- CST- CFE-                 Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
               Link Control 1: CFlE- CST- CFE-                 Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
               Revision ID: 3.00
               Link Frequency 0: 1.6GHz
               Link Error 0:                 Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
               Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
               Link Frequency 1: 200MHz
               Link Error 1:                 Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
               Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
               Prefetchable memory behind bridge Upper: 00-00
               Bus Number: 00
       Capabilities: [54] HyperTransport: UnitID Clumping
       Capabilities: [40] HyperTransport: Retry Mode
       Capabilities: [9c] HyperTransport: #1a
       Capabilities: [f8] HyperTransport: #1c

00:01.0 Class 0604: Device 103c:9602
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
       I/O behind bridge: 0000e000-0000efff
       Memory behind bridge: fe700000-fe8fffff
       Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
       Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
       Capabilities: [b0] Subsystem: Device 103c:1609

00:06.0 Class 0604: Device 1022:9606
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Latency: 0, Cache Line Size: 64 bytes
       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
       I/O behind bridge: 0000f000-00000fff
       Memory behind bridge: fe900000-fe9fffff
       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-         BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0
                       ExtTag+ RBE+
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
               LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
                       ClockPM- Surprise- LLActRep+ BwNot+
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
               RootCap: CRSVisible-
               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
               DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                        Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                        EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
               Address: fee0300c  Data: 4149
       Capabilities: [b0] Subsystem: Device 103c:1609
       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
       Capabilities: [110 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                       Status: NegoPending- InProgress-
       Kernel driver in use: pcieport

00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 41
       Region 0: I/O ports at d000 [size=1]
       Region 1: I/O ports at c000 [size=1]
       Region 2: I/O ports at b000 [size=1]
       Region 3: I/O ports at a000 [size=1]
       Region 4: I/O ports at 9000 [size=1]
       Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K]
       Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
               Address: 00000000fee0100c  Data: 4159
       Capabilities: [70] SATA HBA v1.0 InCfgSpace
       Capabilities: [a4] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP+
       Kernel driver in use: ahci

00:12.0 Class 0c03: Device 1002:4397 (prog-if 10)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]

00:12.2 Class 0c03: Device 1002:4396 (prog-if 20)
       Subsystem: Device 103c:1609
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64, Cache Line Size: 64 bytes
       Interrupt: pin B routed to IRQ 17
       Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=11]
       Capabilities: [c0] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
               Bridge: PM- B3+
       Capabilities: [e4] Debug port: BAR=1 offset=00e0
       Kernel driver in use: ehci_hcd

00:13.0 Class 0c03: Device 1002:4397 (prog-if 10)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]

00:13.2 Class 0c03: Device 1002:4396 (prog-if 20)
       Subsystem: Device 103c:1609
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64, Cache Line Size: 64 bytes
       Interrupt: pin B routed to IRQ 17
       Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=11]
       Capabilities: [c0] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
               Bridge: PM- B3+
       Capabilities: [e4] Debug port: BAR=1 offset=00e0
       Kernel driver in use: ehci_hcd

00:14.0 Class 0c05: Device 1002:4385 (rev 42)
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 
00:14.3 Class 0601: Device 1002:439d (rev 40)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0

00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01)
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64
       Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
       I/O behind bridge: 0000f000-00000fff
       Memory behind bridge: fff00000-000fffff
       Prefetchable memory behind bridge: fff00000-000fffff
       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-         BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:16.0 Class 0c03: Device 1002:4397 (prog-if 10)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]

00:16.2 Class 0c03: Device 1002:4396 (prog-if 20)
       Subsystem: Device 103c:1609
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64, Cache Line Size: 64 bytes
       Interrupt: pin B routed to IRQ 17
       Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=11]
       Capabilities: [c0] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
               Bridge: PM- B3+
       Capabilities: [e4] Debug port: BAR=1 offset=00e0
       Kernel driver in use: ehci_hcd

00:18.0 Class 0600: Device 1022:1200
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Capabilities: [80] HyperTransport: Host or Secondary Interface
               Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-                 Link Control: CFlE- CST- CFE-                 Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
               Revision ID: 3.00
               Link Frequency: 1.6GHz
               Link Error:                 Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Class 0600: Device 1022:1201
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
00:18.2 Class 0600: Device 1022:1202
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
00:18.3 Class 0600: Device 1022:1203
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Capabilities: [f0] Secure device <?>

00:18.4 Class 0600: Device 1022:1204
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
01:05.0 Class 0300: Device 1002:9712
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 10
       Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
       Region 1: I/O ports at e000 [size=11]
       Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
       Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
       Expansion ROM at  [disabled]
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
               Address: 0000000000000000  Data: 0000

02:00.0 Class 0200: Device 14e4:165b (rev 10)
       Subsystem: Device 103c:705d
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 42
       Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
       Capabilities: [48] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
       Capabilities: [40] Vital Product Data
               Product Name: HP NC107i PCIe Gigabit Server Adapter
               Read-only fields:
                       [PN] Part number: BCM95723
                       [EC] Engineering changes: 106679-15
                       [sN] Serial number: 0123456789
                       [MN] Manufacture ID: 31 34 65 34
                       [RV] Reserved: checksum good, 37 byte(s) reserved
               Read/write fields:
                       [YA] Asset tag: XYZ01234567
                       [RW] Read-write area: 107 byte(s) free
               End
       Capabilities: [60] Vendor Specific Information: Len=6c <?>
       Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
               Address: 00000000fee0100c  Data: 4161
       Capabilities: [cc] Express (v2) Endpoint, MSI 00
               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
                       ClockPM+ Surprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                        Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                        EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
       Capabilities: [100 v1] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
       Capabilities: [13c v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                       Status: NegoPending- InProgress-
       Capabilities: [160 v1] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx
       Capabilities: [16c v1] Power Budgeting <?>
       Kernel driver in use: tg3

Link to comment
Share on other sites

I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)...

Could you pm me the dmesg or `lspci -vvv` output from alpha5 and alpha7?

I can post the output from alpha5 first. Output from alpha7 will be provided later...

 

00:00.0 Class 0600: Device 1022:9601
       Subsystem: Device 103c:1609
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0
       Capabilities: [c4] HyperTransport: Slave or Primary Interface
               Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
               Link Control 0: CFlE- CST- CFE-                 Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
               Link Control 1: CFlE- CST- CFE-                 Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
               Revision ID: 3.00
               Link Frequency 0: 1.6GHz
               Link Error 0:                 Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
               Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
               Link Frequency 1: 200MHz
               Link Error 1:                 Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
               Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
               Prefetchable memory behind bridge Upper: 00-00
               Bus Number: 00
       Capabilities: [54] HyperTransport: UnitID Clumping
       Capabilities: [40] HyperTransport: Retry Mode
       Capabilities: [9c] HyperTransport: #1a
       Capabilities: [f8] HyperTransport: #1c

00:01.0 Class 0604: Device 103c:9602
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
       I/O behind bridge: 0000e000-0000efff
       Memory behind bridge: fe700000-fe8fffff
       Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
       Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
       Capabilities: [b0] Subsystem: Device 103c:1609

00:06.0 Class 0604: Device 1022:9606
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Latency: 0, Cache Line Size: 64 bytes
       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
       I/O behind bridge: 0000f000-00000fff
       Memory behind bridge: fe900000-fe9fffff
       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-         BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0
                       ExtTag+ RBE+
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
               LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
                       ClockPM- Surprise- LLActRep+ BwNot+
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
               RootCap: CRSVisible-
               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
               DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                        Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                        EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
               Address: fee0300c  Data: 4149
       Capabilities: [b0] Subsystem: Device 103c:1609
       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
       Capabilities: [110 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                       Status: NegoPending- InProgress-
       Kernel driver in use: pcieport

00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 41
       Region 0: I/O ports at d000 [size=1]
       Region 1: I/O ports at c000 [size=1]
       Region 2: I/O ports at b000 [size=1]
       Region 3: I/O ports at a000 [size=1]
       Region 4: I/O ports at 9000 [size=1]
       Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K]
       Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
               Address: 00000000fee0100c  Data: 4159
       Capabilities: [70] SATA HBA v1.0 InCfgSpace
       Capabilities: [a4] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP+
       Kernel driver in use: ahci

00:12.0 Class 0c03: Device 1002:4397 (prog-if 10)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]

00:12.2 Class 0c03: Device 1002:4396 (prog-if 20)
       Subsystem: Device 103c:1609
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64, Cache Line Size: 64 bytes
       Interrupt: pin B routed to IRQ 17
       Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=11]
       Capabilities: [c0] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
               Bridge: PM- B3+
       Capabilities: [e4] Debug port: BAR=1 offset=00e0
       Kernel driver in use: ehci_hcd

00:13.0 Class 0c03: Device 1002:4397 (prog-if 10)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]

00:13.2 Class 0c03: Device 1002:4396 (prog-if 20)
       Subsystem: Device 103c:1609
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64, Cache Line Size: 64 bytes
       Interrupt: pin B routed to IRQ 17
       Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=11]
       Capabilities: [c0] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
               Bridge: PM- B3+
       Capabilities: [e4] Debug port: BAR=1 offset=00e0
       Kernel driver in use: ehci_hcd

00:14.0 Class 0c05: Device 1002:4385 (rev 42)
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 
00:14.3 Class 0601: Device 1002:439d (rev 40)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0

00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01)
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64
       Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
       I/O behind bridge: 0000f000-00000fff
       Memory behind bridge: fff00000-000fffff
       Prefetchable memory behind bridge: fff00000-000fffff
       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-         BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:16.0 Class 0c03: Device 1002:4397 (prog-if 10)
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Interrupt: pin A routed to IRQ 18
       Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]

00:16.2 Class 0c03: Device 1002:4396 (prog-if 20)
       Subsystem: Device 103c:1609
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64, Cache Line Size: 64 bytes
       Interrupt: pin B routed to IRQ 17
       Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=11]
       Capabilities: [c0] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
               Bridge: PM- B3+
       Capabilities: [e4] Debug port: BAR=1 offset=00e0
       Kernel driver in use: ehci_hcd

00:18.0 Class 0600: Device 1022:1200
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Capabilities: [80] HyperTransport: Host or Secondary Interface
               Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-                 Link Control: CFlE- CST- CFE-                 Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
               Revision ID: 3.00
               Link Frequency: 1.6GHz
               Link Error:                 Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Class 0600: Device 1022:1201
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
00:18.2 Class 0600: Device 1022:1202
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
00:18.3 Class 0600: Device 1022:1203
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Capabilities: [f0] Secure device <?>

00:18.4 Class 0600: Device 1022:1204
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
01:05.0 Class 0300: Device 1002:9712
       Subsystem: Device 103c:1609
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 10
       Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
       Region 1: I/O ports at e000 [size=11]
       Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
       Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
       Expansion ROM at  [disabled]
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
               Address: 0000000000000000  Data: 0000

02:00.0 Class 0200: Device 14e4:165b (rev 10)
       Subsystem: Device 103c:705d
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 42
       Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
       Capabilities: [48] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
       Capabilities: [40] Vital Product Data
               Product Name: HP NC107i PCIe Gigabit Server Adapter
               Read-only fields:
                       [PN] Part number: BCM95723
                       [EC] Engineering changes: 106679-15
                       [sN] Serial number: 0123456789
                       [MN] Manufacture ID: 31 34 65 34
                       [RV] Reserved: checksum good, 37 byte(s) reserved
               Read/write fields:
                       [YA] Asset tag: XYZ01234567
                       [RW] Read-write area: 107 byte(s) free
               End
       Capabilities: [60] Vendor Specific Information: Len=6c <?>
       Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
               Address: 00000000fee0100c  Data: 4161
       Capabilities: [cc] Express (v2) Endpoint, MSI 00
               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                       MaxPayload 128 bytes, MaxReadReq 4096 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
                       ClockPM+ Surprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                        Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                        EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
       Capabilities: [100 v1] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
       Capabilities: [13c v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                       Status: NegoPending- InProgress-
       Capabilities: [160 v1] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx
       Capabilities: [16c v1] Power Budgeting <?>
       Kernel driver in use: tg3

Link to comment
Share on other sites

Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3)

 

[  233.845818] Linux video capture interface: v2.00
[  233.904054] em28xx: New device   @ 480 Mbps (0000:0000, interface 0, class 0)
[  233.904061] em28xx: Audio interface 0 found (Vendor Class)
[  233.904066] em28xx: Video interface 0 found: isoc
[  233.904071] em28xx: DVB interface 0 found: isoc
[  233.904196] em28xx: chip ID is em2882/3
[  234.017108] i2c-core: Attempt to register an adapter with no name!
[  234.017114] em2882/3 #0: em28xx_i2c_register: i2c_add_adapter failed! retval [-22]
[  234.017118] em2882/3 #0: em28xx_init_dev: em28xx_i2c_register bus 0 - error [-22]!
[  234.017143] em28xx: probe of 1-4:1.0 failed with error -22
[  234.017341] usbcore: registered new interface driver em28xx
[  234.050846] Em28xx: Initialized (Em28xx Input Extension) extension
[  234.070870] dvb_core: Unknown symbol __refrigerator (err 0)
[  234.119478] drxk: Unknown symbol intlog10 (err 0)
[  234.133125] cxd2820r: Unknown symbol intlog10 (err 0)
[  234.133168] cxd2820r: Unknown symbol intlog2 (err 0)
[  234.327075] lgdt330x: Unknown symbol intlog10 (err 0)
[  234.350556] lgdt3305: Unknown symbol intlog10 (err 0)
[  234.400293] em28xx_dvb: Unknown symbol dvb_dmxdev_init (err 0)
[  234.400353] em28xx_dvb: Unknown symbol dvb_register_adapter (err 0)
[  234.400390] em28xx_dvb: Unknown symbol dvb_dmx_release (err 0)
[  234.400447] em28xx_dvb: Unknown symbol dvb_net_init (err 0)
[  234.400480] em28xx_dvb: Unknown symbol dvb_dmx_swfilter (err 0)
[  234.400517] em28xx_dvb: Unknown symbol dvb_dmxdev_release (err 0)
[  234.400551] em28xx_dvb: Unknown symbol dvb_frontend_detach (err 0)
[  234.400584] em28xx_dvb: Unknown symbol dvb_net_release (err 0)
[  234.400623] em28xx_dvb: Unknown symbol dvb_unregister_frontend (err 0)
[  234.400662] em28xx_dvb: Unknown symbol dvb_register_frontend (err 0)
[  234.400696] em28xx_dvb: Unknown symbol dvb_unregister_adapter (err 0)
[  234.400729] em28xx_dvb: Unknown symbol dvb_dmx_init (err 0)

 

I found that:

https://github.com/andy928/xpenology/tr ... deo/em28xx

http://www.linuxtv.org/wiki/index.php/H ... V-HVR-930C

Link to comment
Share on other sites

Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3)

 

[  233.845818] Linux video capture interface: v2.00
[  233.904054] em28xx: New device   @ 480 Mbps (0000:0000, interface 0, class 0)
[  233.904061] em28xx: Audio interface 0 found (Vendor Class)
[  233.904066] em28xx: Video interface 0 found: isoc
[  233.904071] em28xx: DVB interface 0 found: isoc
[  233.904196] em28xx: chip ID is em2882/3
[  234.017108] i2c-core: Attempt to register an adapter with no name!
[  234.017114] em2882/3 #0: em28xx_i2c_register: i2c_add_adapter failed! retval [-22]
[  234.017118] em2882/3 #0: em28xx_init_dev: em28xx_i2c_register bus 0 - error [-22]!
[  234.017143] em28xx: probe of 1-4:1.0 failed with error -22
[  234.017341] usbcore: registered new interface driver em28xx
[  234.050846] Em28xx: Initialized (Em28xx Input Extension) extension
[  234.070870] dvb_core: Unknown symbol __refrigerator (err 0)
[  234.119478] drxk: Unknown symbol intlog10 (err 0)
[  234.133125] cxd2820r: Unknown symbol intlog10 (err 0)
[  234.133168] cxd2820r: Unknown symbol intlog2 (err 0)
[  234.327075] lgdt330x: Unknown symbol intlog10 (err 0)
[  234.350556] lgdt3305: Unknown symbol intlog10 (err 0)
[  234.400293] em28xx_dvb: Unknown symbol dvb_dmxdev_init (err 0)
[  234.400353] em28xx_dvb: Unknown symbol dvb_register_adapter (err 0)
[  234.400390] em28xx_dvb: Unknown symbol dvb_dmx_release (err 0)
[  234.400447] em28xx_dvb: Unknown symbol dvb_net_init (err 0)
[  234.400480] em28xx_dvb: Unknown symbol dvb_dmx_swfilter (err 0)
[  234.400517] em28xx_dvb: Unknown symbol dvb_dmxdev_release (err 0)
[  234.400551] em28xx_dvb: Unknown symbol dvb_frontend_detach (err 0)
[  234.400584] em28xx_dvb: Unknown symbol dvb_net_release (err 0)
[  234.400623] em28xx_dvb: Unknown symbol dvb_unregister_frontend (err 0)
[  234.400662] em28xx_dvb: Unknown symbol dvb_register_frontend (err 0)
[  234.400696] em28xx_dvb: Unknown symbol dvb_unregister_adapter (err 0)
[  234.400729] em28xx_dvb: Unknown symbol dvb_dmx_init (err 0)

 

I found that:

https://github.com/andy928/xpenology/tr ... deo/em28xx

http://www.linuxtv.org/wiki/index.php/H ... V-HVR-930C

Link to comment
Share on other sites

is there a method to install this directly to hardware without vm?

 

thanks

 

It's the same process for installing to physical hardware. You just need to write the image to your USB disk.

 

  • Attach your USB disk (PATA/SATA disk disconnected) and boot to your physical hardware using a LInux livecd.
  • Get the USB disk path.
    # dmesg | egrep '^(sd|hd).*[1-9]''


  • Let assume your USB disk is /dev/sda (step 2 result), write the image to your USB disk.
    # dd if=gnoboot-alpha7 of=/dev/sda


  • Open Synology Assistant to begin DSM installation.

Link to comment
Share on other sites

is there a method to install this directly to hardware without vm?

 

thanks

 

It's the same process for installing to physical hardware. You just need to write the image to your USB disk.

 

  • Attach your USB disk (PATA/SATA disk disconnected) and boot to your physical hardware using a LInux livecd.
  • Get the USB disk path.
    # dmesg | egrep '^(sd|hd).*[1-9]''


  • Let assume your USB disk is /dev/sda (step 2 result), write the image to your USB disk.
    # dd if=gnoboot-alpha7 of=/dev/sda


  • Open Synology Assistant to begin DSM installation.

Link to comment
Share on other sites

Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3)

Multimedia support enabled in the kernel, will be included in Alpha8. Check my blog to get the latest updates and don't forget to click the ADs :wink:

Sweet, thanks !

 

Will it be possible to do "clean" update in the future? I can make 5 beta update with telnet command but it doesn't work with 4.3 (3810 -> 3827)

Link to comment
Share on other sites

Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3)

Multimedia support enabled in the kernel, will be included in Alpha8. Check my blog to get the latest updates and don't forget to click the ADs :wink:

Sweet, thanks !

 

Will it be possible to do "clean" update in the future? I can make 5 beta update with telnet command but it doesn't work with 4.3 (3810 -> 3827)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...