aTan Posted March 16, 2013 Share #1 Posted March 16, 2013 I've installed this viewtopic.php?f=2&t=555 to a computer with an usb key and dsm assistant. after installing dsm files in assistant, pc restarts and after bios there is just blinking underscore. than after several minutes assistant fails to install configuration with connection timeout error. i guess that pc don't boot properly. maybe bootloader is corrupted. is there some way to fix it? i've tried to reinstall it twice. Link to comment Share on other sites More sharing options...
XPEH Posted March 17, 2013 Share #2 Posted March 17, 2013 Make sure that BIOS is set to boot from USB first. Link to comment Share on other sites More sharing options...
aTan Posted March 17, 2013 Author Share #3 Posted March 17, 2013 There are two disks, both are in a boot list. Link to comment Share on other sites More sharing options...
lpstudio Posted April 20, 2013 Share #4 Posted April 20, 2013 I am having the same problem only mine hangs unless I unplug the sata harddrive. Did you get it working? Link to comment Share on other sites More sharing options...
kuehne.robs Posted January 20, 2014 Share #5 Posted January 20, 2014 i 've got the same problem after install 4.2 repack 1.2 on an Intel S5000VSA Mainboard. The onboard Controller hangs on enumerating the disks until i unplug them. Have you solved it ? Link to comment Share on other sites More sharing options...
stanza Posted January 20, 2014 Share #6 Posted January 20, 2014 Try the following Completely wipe the drives and start again with BIOS set to ACHI mode (eg boot a linux live usb and remove any and all partitions) or Set to IDE mode in BIOS . Link to comment Share on other sites More sharing options...
kuehne.robs Posted January 20, 2014 Share #7 Posted January 20, 2014 if my bios is set to legacy i cant see all disks - if set to sata/ahci the controller only boots without drives. i will try to shuffle the disks and ports and wipe the drives one after another Link to comment Share on other sites More sharing options...
kuehne.robs Posted February 13, 2014 Share #8 Posted February 13, 2014 it ended up in the situation that i am only using the 3Ware Raid controller. Link to comment Share on other sites More sharing options...
kuehne.robs Posted February 13, 2014 Share #9 Posted February 13, 2014 it ended up in the situation that i am only using the 3Ware Raid controller. Link to comment Share on other sites More sharing options...
Recommended Posts