Search the Community

Loader version and model: JUN'S LOADER v1.04b - DS918+ Installation type: BAREMETAL - Asus PRIME H310I-PLUS R2.0, NIC: Realtek® RTL8111H (onboard) DSM 6.2.3-25426 Update 3 Intel i8 16 GB RAM Rivo SATA III PCIe Card, 6 Sata Ports In case someone is looking for one used XPEnology tool and followed directions running like a dream

Всем приветы! Подскажите, пожалуйста, начинающему - какую лучше выбрать материнскую плату форм-фактор mini-ITX и где меньше проблем с установкой DS918+ DSM 6.2.3? Цель: хранилище фотографий, фильмов, музыки. Пакеты: DLNA сервер мультимедиа, Video Station, Plex Media Server, Download Station, Photo Station или Moments. Транскодинг: hw и sw. Нашел такие платы: GIGABYTE GA-J3455N-D3H (rev. 1.0) GIGABYTE GA-N3160N-D3V (rev. 1.0) ASRock J3455-ITX ASRock J4105-ITX GIGABYTE H310N 2.0 ASUS PRIME H310I-PLUS ASUS PRIME H310I-PLUS R2.0/CSM Может, есть интересней?

Machine 1 - Outcome of the update: SUCCESSFUL - DSM version prior update: n/a - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: v0.13.3 - Installation type: BAREMETAL - Asus PRIME H310I-PLUS R2.0, NIC: Realtek® RTL8111H (onboard) - Additional comments: See below: 1. Jun's 1.04b loader is the only one that worked. Find.synology didn't work using 1.03b for DS3615, or 1.04b w/o the additional extra.lzma. 2. First try I used I5-9600K, after replacing the i915 driver, dev/dri showed up, but hardware transcoding didn't work (just try playing any .avi). Also, I had to replace libsynophoto-plugin-detection.so for face detection / subject in Moments to work. 3. Second try I used I5-8600K, everything worked out of the box, no need to replace i915.ko or libsynophoto-plugin-detection.so. 4. In VMM, for all VM's CPU compatibility mode must be enabled. If not, when installing Linux, it doesn't go past the partition screen. In Windows, if I don't enable CPU compatibility mode, strangely most applications run, but iTunes, and Irfanview would not work under Windows 7, iTunes would not work under Windows 10. With CPU compatibility mode on, everything works. 5. WOL, shutdown, all work normally. Machine 2 - Outcome of the update: SUCCESSFUL - DSM version prior update: n/a - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus P6X58D-E, NIC: Marvell 88E8056 (onboard), i7-930 - Additional comments: See below: 1. Jun's 1.03b loader is the only one that worked. Find.synology didn't work using 1.04b. 2. In VMM, Windows 10 can only be installed when set to UEFI boot. No need to turn on CPU compatibility mode. Resolution must be set in the UEFI BIOS. 3. WOL, shutdown, all work normally. 4. Even though there's no dev/dri, which means it's not supposed to have hardware transcoding, it can deliver .avi videos to DS Video on my iPhone. So some form of transcoding was working. Because my other set up with the I5-9600k, even though dev/dri existed, .avi just won't play. 5. To summarize, everything works out of the box without additional extra.lzma, etc.

Немного задумался над сменой железа. В данный момент у меня j3455-itx от асрок. Хочется что-то более мощное собрать чтоли с заделом на будущее. Основной критерий выбора материнской платы - это конечно же форм-фактор mini-itx. А посему смотрю в сторону ASUS PRIME H310I-PLUS R2.0 или например ASUS H110I-PLUS. Как приятный бонус PCI-E 3.0 x16 на борту. Кто-то имел с ними дела в нашем ХРЕНовом деле? Может быть есть какая-то другая альтернатива? И какой камень тогда сюда посоветовать можете? Спасибо заранее за ответы.

Bonjour, un peu de politesse svp Une simple recherche peu deja vous en apprendre beaucoup : https://xpenology.com/forum/search/?q=H310I-PLUS Visiblement ok sous v1.03a2 - DS918+ avec DSM 6.2 Mais pas OK sous LOADER v1.04b - DS918+ avec DSM 6.2.2

Je cherche à savoir si la CM:ASUS PRIME H310I-PLUS R2.0 est déjà utilisée par quelqu’un et fonctionnelle pour un NAS XPEnology. J'aimerais fire un DSM 6.2.2 avec 6 DD et un SSD.

Hi all, I would like to build my first NAS, but I want to build it myself. When I came across Xpenelogy I was thrilled so I decided to make a list of items. My expectations from build: - backup of computers at home - backup of photos from phones - storage of data that are not needed on computers - media server My setup: Board: ASUS PRIME H310I-PLUS R2.0 Processor: Intel Pentium G5420 RAM: Patriot Viper Elite gray 8GB (2x4GB) DDR4 2666 Disks: 2xSeagate IronWolf 6TB, in future there will be more Boot, system: TRANSCEND MTE510T 128GB - since the board has M.2 I would like to use SSD as system partition. Did you guys see any possible issues with my build? Do you think it is possible to use M.2 as boot destination? What release of Xpenology would you reccomend? Thank you all

Люди помогите с решением проблемы: 24.04.19г на систему: ASUS PRIME H310I-PLUS, G5400 Gold. ddr4 1x8gb, 1xSSD - Intel ssd540s 120gb. была установлена: DSM_DS918+_23739 с помощью" Версия и модель загрузчика: JUN'S LOADER v1.04b - DS918+" Дополнительные модули extra.lzma: не устанавливались. Все установилось и обновилось до последней на тот момент версии. Сегодня был куплен HDD 1tb и была принята попытка переустановить систему. На данный момент при установке через JUN'S LOADER v1.04b - DS918+ - система не дает установить уже DSM_DS918+_23739 и просит использовать только файл DSM 6.2.2-24922. После перезагрузки в сети не появляется. В чем проблема то *?

- Результат: Провал - Версия и модель загрузчика: JUN'S LOADER v1.04b - DS918+ - Версия DSM: DSM 6.2.2-24922 - Дополнительные модули extra.lzma: NO - Аппаратное решение: ASUS PRIME H310I-PLUS, G5400 Gold. ddr4 1x8gb, 1xhdd + 1xSSD - Короткий комментарий: UP с DSM_DS918+_23739, после перезагрузки в сети не появляется.

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASUS PRIME H310I-PLUS - Additional comments:

I just built a new NAS with 1.03a2 loader with DS918+ successfully. Couldn't wait to open this account and report this : D My set up: Intel Pentium Gold G5500 2 Cores 4 Threads @3.80 GHz ASUS PRIME H310I-PLUS DDR4-2133 RAM 8GB Toshiba 3TB SATA3 Harddisk, JBOD Toshiba 4TB SATA3 Harddisk, moved from another SynologyNAS, SHR with files (later formated into JBOD too) I updated to version DSM 6.2-23739 Update 1 right the way. Everything works fine for 4 days: Starting/Rebooting, packages like drive/moment, video station, surveillance station & community packages like CouchPotato Btw has anyone updated to DSM 6.2-23739 Update 2 yet? How's that?

i have Asus Prime H310I-Pluss with HDD NVMe Intel® Socket 1151 for 8th Generation i5/Core™ Intel® H310 Chipset : DDR4 2666/2400/2133 MHz Realtek® RTL8111H, 1 x Gigabit LAN Please help to install? I used DSM DS920+ as model and after boot creation I was able to continue the installation by loading OS DSM_DS920+_64561.pat via http (I was able to install it on a Sata HDD not on the NVMe one) My PC has a blinking cursor and it doesn't boot