Pollux4092
-
Posts
10 -
Joined
-
Last visited
Posts posted by Pollux4092
-
-
Very well done!!
thanks
-
-
Click on volume, then action
Here you can expand your volume by using your Disq inutilsé
It will take some time (days) but there should be no problems.
Tip: Do a extended smart test first. Rebuilding a RAID array is a very disk intensive task. If a HDD is about to fail, that will be the moment they tend to do so.
Good luck!
-
Same here to,
the complete hardware/power tab is unresponsive.
Xpenology runs on a proliant ML10V2, bare metal
-
Did a bare metal install. System did a reboot, after that normal operations.
-
Just did the install on bare metal. No problems!
-
If you go for an intel c222 with xeon cpu all options are open....
-
I would suggest to have a look at http://xpenology.com/forum/viewtopic.php?f=2&t=10973 to see if all the hardware you will buy is supported.
If you are planning to go virtual (ESXi maybe?), my advise would be to go for a platform wich supports VMDirectPath, so you can use a cheap controler. https://kb.vmware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=2142307
Baremetal is the simpelest way to get up and running. Just write an USB stick and you're away. (and maybe, depending on your hardware tweak the lancard)
I just bought a Proliant ML10v2 runs really nice and not to expensive....
-
I wonder if this really brings you anything. The amount off power consumed can be neglected
Can you connect to the Internet with just a router?
in The Noob Lounge
Posted
Define : "connect"