pauldiaz
-
Posts
17 -
Joined
-
Last visited
Posts posted by pauldiaz
-
-
how do i update v1.02b (DS3615xs, DS3617xs and DS916+) is for DSM 6.1
from DSM 6.0.2-8451 Update 8
i don't want to stuff up anything i still do the same thing as op said? but just put the same info what i did before do i let
DSM 6.0.2-8451 Update 8 boot up on loader v1.02b ? and then install DSM 6.1.3-15152 main file once booted up
On 10/28/2016 at 11:18 PM, Polanskiman said:You want to modify the following:
Change vid=0x090C to vid=0x[your usb drive vid]
Change pid=0x1000 to pid=0x[your usb drive pid]
Change sn=C7LWN09761 to sn=generate your sn here with DS3615xs model
Change mac1=0011322CA785 to mac1=[your NIC MAC address]. You can also add set mac2=[your NIC MAC address #2] and so on until mac4 if you have multiple NICs. However, this is not necessary.
Optional: Change set timeout='1' to set timeout='4' - This will allow you more time to make a selection in the Grub Boot Menu when it appears.
-
Hi Just Asking I'm running DSM 6.0.2-8451 Update 8
what update can I take ?
Thank you
-
so update 6.0.3-8754 is now out can we update or not?
-
no worries thanks for your Help i try update 8 not sure about update 11 ATM
-
should i update via each updates or all the fixers are in update 8 fine to use ?
-
thank you
i'm getting this message dsm cannot start up normally every things looks fine since i'm using DSM 6.0.2-8451 but after 3 days of up time i'm now getting that message
-
where can i download just Version: 6.0.2-8451 update 8
i need to install it
-
hi i running right now 5.2-5967 how ever there is an update to 5.2-5967-2 is it safe to update with the boot loader at 5.2-5967
-
how to i go about updating DS3615xs 5.2-5967.1 x64 downloaded from https://download.xpenology.xyz
do i reload on the usb XPEnoboot_DS3615xs_5.2-5967.1.img and then once booted update to DSM_DS3615xs_5967.pat
not sure if thats how to do it
-
also the mother board is a dell atm
-
so i moved my data over to the new hardware but for some reason it's showing up as an INTEL Core i3-4130 when in fact i have a Intel Core i5-2400 CPU @ 3.10GHz
and the number of cores are showing up as 2 not 4 ?
see screen shot's
i also run a command cat /proc/cpuinfo in ssh and is showing what's in the screen shot
-
Hi just got my self a new intel i5 just want to move over from an intel core 2 duo
the problem is i'm running right now
Base XPEnoboot 5.2-5644.5
DS3615xs DSM 5.2-5644 Update 8
the problem is there is an update of DSM 5.2-5967
but i just can't find away to download DSM 5.2-5644 Update 8 so incase i have to reinstall once i boot it up on the new hardware i need the PAT file
-
for some reason ffmpeg is very high
i only have plex - download station that's it but for some reason ffmpeg is very high for no reason not even using plex
what could be doing this?
-
i was still on 5.1 just update to 5.2 today hahaha
now 6 came out....
-
Hey
installed an update today to 5.2-5644 was running 5.1 wanted to jump up and get all the updates
but now it say 5.2-5644 update 8
the base i have XPEnoboot 5.2-5644.5 DS3615xs
i can't jump up to update 8 but only update 3 ?
got it from this site
-
Hey just want to know how to update
Do i put the new bootloader 5.2 and migration my data to the new system
or do i update in the 5.1 boot loader then once updated remove usb and put 5.2 boot loader?
i'm not clear on what to do to update to 5.2
i'm running DSM 5.1-5055
How to update Jun's loader?
in General Post-Installation Questions/Discussions (non-hardware specific)
Posted
@Polanskiman Thanks mate I didn't see your comment when i tried looking for it as i kept getting please try again error when trying to find posts