Trantor

The mpt3sas will be automatically load at boot in next release. You can easily edit /etc/rc.local and add your insmod command to load the mtp3sas.ok module

Your controller is base on a LSI 2108 chip that is supported by megaraid_sas driver that is present in XPEnoboot

What protocol and client did you use ? Can't get pptp to works at all on 5592 and 5644 builds. Tested on bare metal and vm.

r8168, r8169, r8101 drivers are included in XPEnoboot 5644.4, so your card should work. In 5644.4 the old/crappy r8169 driver has been replaced by the "updated" one frome realtek website. r8101 : RTL8101E, RTL8102E(L), RTL8103E(L) and RTL8107E r8168 : RTL8168B/8111B, RTL8168C/8111C, RTL8168CP/8111CP, RTL8168D/8111D, RTL8168DP/8111DP, and RTL8168E/8111E r8169 : RTL8169S/8110S, RTL8169SB/8110SB, and RTL8110SC. Did you try to boot with linux live cd and check with lspci -vv what drivers is used for this card ? YES If I find some time I will start a list.

No, XPEnoboot is for x64 capable CPU only. Sorry.

According HP website for your T5745 you should have one of these network card: Allied Telesis PCIe x1 Fast Ethernet Fiber Network Interface Card (AT-2711FX) Allied Telesis PCI-e x1 Gigabit Fiber Network Interface Card (AT-2972SX) Both use the broadcom tg3 driver which I think is included in nanoboot release. Unfortunately the CPU inside this little thing is a Intel Atom N280 which do not support 64bits so you can't use XPEnoboot

In this forum the guy wrote that he have issues with Ubuntu 15.10 Server x64 and dml33 haven't. The current solution for my problem is to compile an current kernel without UAS support. (Older ASMedia Chips get detected by the kernel driver and uas is disabled automatically). Resulting in massive performance loss.

Did you try on USB2 ports instead of USB3 ? Try to boot in debug mode and/or remove loglevel=0 from boot command line (in syslinux.cfg or grub console) in order to show more informations.

New release fix this issue : viewtopic.php?f=2&t=5026

ixgbe support X550 hardware since v4.1.1 (http://sourceforge.net/projects/e1000/f ... ble/4.1.1/) XPEnoboot 5.2-5644.1 included ixgbe v4.1.5 so your network adapter should works. Hmm I tried XPEnoboot 5.2-5644.1 and I get the "eth0 not running" and "eth1 not running" messages when i attempt to run. Nothing in changelog but latest version of ixgbe (v4.2.3) have more X550 PCI DEVICE declared than v4.1.5: v4.1.5 have only: IXGBE_DEV_ID_X550EM_X_10G_T v4.2.3: IXGBE_DEV_ID_X550EM_X_KX4 IXGBE_DEV_ID_X550EM_X_KR IXGBE_DEV_ID_X550EM_X_SFP IXGBE_DEV_ID_X550EM_X_10G_T No idea exactly what it is but it's a start.

This issue is fixed in the dev version and the next release will included it. The nvidia framebuffer is causing this black/blank/hang screen.

Just wait the next release Did you find your system in Synology Assistant ? Unfortunately no I do not, it also does not show up under my router's "connected devices", so it does seem as if the etho port is not running correctly, if at all. Can you boot with a linux live cd like ubuntu, check if your network adapter works and provide the output of lspci -nnvv (only the part related to your network adapter).

Thank you. The ids match the patch @bombai: For your bluetooth issue look if the module (bluetooth.ko) is present in /lib/modules/ and insmod it.

Did you find your system in Synology Assistant ? Your output is not complete. Please provide full. if needed copy it to a file and attach it to your answer.

Did you tried to manually insmod mlx4_core.ko and mlx4_en.ko in your VM ? You talking about 5.1 and 5.2, did both works with bare metal and both failed with ESXi ?

ASUS seems to embeded a non standard Marvell 88SE9485 controller on their P9A-I series board. I found a patch here : http://permalink.gmane.org/gmane.linux.scsi/99330 I edited the mvsas sources according the above patch. To be sure, can you post the output of the command : lspci -nnvv (LOT of informations will output) This will allow us to see if the patch is using the correct pci and subsystem ids. Please post ONLY the part related to the marvell controller For example, here the output of the LSI controller of a VMware VM: 00:10.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 01) Subsystem: VMware LSI Logic Parallel SCSI Controller [15ad:1976] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (1500ns min, 63750ns max) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 1400 [size=11] Region 1: Memory at feba0000 (64-bit, non-prefetchable) [size=128K] Region 3: Memory at febc0000 (64-bit, non-prefetchable) [size=128K] [virtual] Expansion ROM at c0008000 [disabled] [size=16K] Kernel driver in use: mptspi

ixgbe support X550 hardware since v4.1.1 (http://sourceforge.net/projects/e1000/f ... ble/4.1.1/) XPEnoboot 5.2-5644.1 included ixgbe v4.1.5 so your network adapter should works.

Try to remove vga=0x305 from GRUB commandline (syslinux.cfg) and check if you still get the blank screen

Next release will fix broacom issues

Both should work, they use ixgbe driver which is included

If you use it in production environment use real Synology. XPEnology is only for fun/home/geek use ^^.

I figure out the bnx2 driver issues with DSM 5.2 bnx2 version=2.1.11 DSM 5.1 firmware=bnx2/bnx2-rv2p-09ax-6.0.17.fw firmware=bnx2/bnx2-rv2p-09-6.0.17.fw firmware=bnx2/bnx2-rv2p-06-6.0.15.fw firmware=bnx2/bnx2-mips-09-6.2.1a.fw firmware=bnx2/bnx2-mips-06-6.2.1.fw bnx2 version=2.2.3 DSM 5.2 firmware=bnx2/bnx2-rv2p-09ax-6.0.17.fw firmware=bnx2/bnx2-rv2p-09-6.0.17.fw firmware=bnx2/bnx2-rv2p-06-6.0.15.fw firmware=bnx2/bnx2-mips-09-6.2.1b.fw firmware=bnx2/bnx2-mips-06-6.2.3.fw The updated bnx2 version in DSM 5.2 is looking for different firmware than the one present in DSM 5.1. So in order to fix 5709c (bnx2-mips-09-6.2.1b.fw) and 5708 (bnx2-mips-06-6.2.3.fw) issues dev team will add missing firmware (in the GOOD folder this time) to the next release.

Synology update 5644 pat file without any warning. It break the bootloader. !! WAIT the new version of bootloader !!

The known issue is with BMC5709c : viewtopic.php?f=2&t=1361&start=580#p42872 The errors show missing firmware and yes it will be fixed in the next release. According dell website your server have : Dual embedded Broadcom® NetXtreme II™ 5708 Gigabit Ethernet This is not the same network adapter. Did you get errors at boot ?

What options did you need to be enabled in the kernel in order to get this working for GOOD ? In this topic I see: CONFIG_ACPI_PROCFS CONFIG_ACPI_PROCFS_POWER CONFIG_ACPI_PROC_EVENT CONFIG_ACPI_BUTTON CONFIG_ACPI_FAN CONFIG_ACPI_PROCESSOR Any other options needed ?