profet
-
Posts
23 -
Joined
-
Last visited
Posts posted by profet
-
-
I believe 7.1.1 update 5 includes SMB multichannel support. My gen 8 microserver has two NICs, so I'll give it a go.
Has anyone managed to get this working with Xpenology?
-
I have a gen8 microserver which is running well on 7.1.1.
I have 4x3b HDDs in one SHR array, and a single 2tb as another volume.
None of the drives ever spin down and I want to fix this.
I am considering replacing the 2tb volume with a large 2tb SSD, and installing all the various DSM packages on it, including cloud station, surveillance station, docker etc.
I will use the HDD array for storing files only.
Will this allows the HDD array to spin down?
-
Outcome of the update: SUCCESSFUL😁
- DSM version prior update: DSM 7.1.1 42962 UPDATE-1
- Loader version and model: Automated RedPill Loader 0.5 alpha-1 DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Gen8.
- Additional comments: Updated via DSM GUI (manual). No need for any loader adjusting - just a simple reboot and it worked.
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.0-42661 Update 4 (DS3615xs)
- Loader version and model: ARPL 5.0A1 - DS3622xs+
- Installation type: BAREMETAL - HP Microserver Gen8 - Xeon E3-1260L- Additional comments: ARPL made this whole process super easy. 5 drives migrated perfectly.
-
Quick appreciation post...
I've just updated my Microserver Gen 8 to 7.1.1 update 1 with ARPL.
I've used just about every loader going over the years, and this process was exceptionally quick and easy.
Thank you to everyone that puts in their time to make it happen!
-
That's good info - thanks!
I'll be using that fifth drive for a couple of CCTV cams only - so speed won't be an issue. That'll free up the fourth front bay to expand my main storage pool...
Honestly, I can't believe how long I've had that Gen8 - and I still don't see any reason to upgrade. Fantastic piece of hardware. I finally set up the ILO interface today, in preparation for moving to a newer loader and DSM version - which makes it even more amazing...
-
Well I'm just going to go ahead and answer my own question...
Yes, you can put a 5th drive in there. I have an SSD connected with an adaptor to the floppy power cable, and a spare sata cable to the motherboard.
Showed up in Xpenology right away once I booted - nothing needed to be changed in BIOS or in the loader.
Next step is to see if I can replace the SSD with a full size HDD...
-
Does anyone know if I can add a 5th int drive to my gen8 - either an SSD or 2.5" HDD, for use with surveillance station?
I know it can be done physically, but will xpenology see it? Do I need to change anything in the HP bios?
I'm on DS3615xs 7.1.0 at the moment. Will be switching to DS3622xs+ and 7.1.1 soon.
-
Finally decided to go from 7.0 to 7.1 today on my Gen8 bare metal and it's been a steep learning curve!
I now know a lot more about satamaps than I ever wanted too.
Quick question though - I'm using ds3615xs because I thought my CPU - e3-1220v2 -couldn't handle anything newer - but I've seen some people using the 3622xs+ build on the Gen8.
How is this possible? Can I just run through TCRP loader again, and select the 3622 instead?
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1-42661
- Loader version and model: Tinycore Redpill DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL – HP Microserver Gen8Notes: straight from 7.1 to U4. Ran postupdate via TCRP SSH - seemed to think I was on U3 but still worked. Weirdly rebooted back into TCRP loader again, so had to restart and manually select DSM.
-
2 hours ago, zahni said:
However when uploading the pat file(ds3617xs_42218.pat) I always getting an error telling me the file is probably defect , while uploading to the NAS? I arleady have replaced the USB key and checked the PID/VID. Nothing was working.....
I'm not sure the CPU in the Gen8 can run the ds3617xs - you need to use the 3615xs instead I think. Works for me anyway. Think you may have to build the loader again as well.
-
21 minutes ago, Franks4fingers said:
Do you need to be running 6.2.4 to be able to go to 7 or can you be on 6.2.3 and then still make that jump?
I went from 6.2.3 with no issues.
-
1
-
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25426 Update 3
- Loader version and model: RedPill DS3615xs v7.0.1-42218
- Using custom extra.lzma: No idea, so gonna say NO
- Installation type: BAREMETAL - HP Microserver Gen8 (Intel Xeon E3-1260L)
Notes - used RedPill Tinycore loader.
-
3
-
-
So happy to read there is life in Xpenology yet...
Massive thanks for all your hard work!
-
1
-
-
Full install (migrate) from 5.2 to 6.1.2-15132 successful on baremetal Gen8.
It wasn't straightforward though - the first time through I couldn't find the DS at all. Restarted, still nothing. Reinstalled the same version a second time, and it worked.
-
1
-
-
I'm amazed that dsm6 even boots. Let's hope this means official support for dsm6 is easier work for the devs!
Sent from my ONE E1003 using Tapatalk
-
Worked fine if anyone cares
-
Don't think you can not off the microSD. Just use a cheap old 2gb card. It's only for booting - DSM is stored on the hdds.
-
There's a thread for reverting to 5.1.
-
Building from one to two drives would just mirror the first drive, then adding the third would then wipe that second drive and rebuild as raid5. Send like a real faff.
I've got everything backed up, so I'm going to try going straight to 3 disks. Fingers crossed.
-
I have a Microserver Gen8 up and running with a single 2TB in SHR. I want to add two more identical drives. Do I just add them both and build straight to a SHR raid 5 array, or do I have to do one drive at a time?
SMB multichannel anyone?
in General Post-Installation Questions/Discussions (non-hardware specific)
Posted
That's great to know, thank you. I'll give it a try and see what speeds I can get.