kewag

Members
  • Content Count

    27
  • Joined

  • Last visited

Everything posted by kewag

  1. Couldnt sleep, so I 6.2.2 drivers.... and guess what............. :)))))))) The Realtek is working. Two Ethernetports up and running. Thank you ! Can sleep again.
  2. Damn. The PCI card caused the PC not to shutdown /reboot.... Removed it again. Can live with 1 ethernet port for now Thanks everybody for helping out
  3. Yes... It is the Intel. The Realtek isnt working. So, I deactivated the onboard and plugged in another Intel CT. But this one is a PCI-Version. Same 1GB chip. Do I have to rebuild the stick and do the migrate? A simple reboot didn't work.
  4. Do you mean I should swap it? This is how it is set up right now: set mac1=5404A6BF1E9B set mac2=6805CA0B503A
  5. Just checked the MAC. Belongs to ASUStek
  6. Not sure if I'm using dmesg correctly but weird output for eth0. [ 17.499125] e1000e 0000:03:00.0 eth0: registered PHC clock [ 17.499128] e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca :0b:50:3a [ 17.499129] e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 17.499142] e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-007 [ 18.944322] device eth0 entered promiscuous mode [ 18.945217] device ovs_eth0 entered promiscuous mode [ 20.033999] device eth0 left promiscuous mode [ 20
  7. It is as you said. I updated quickly and didn't check before if 2 ethernet ports were there with the old version. Will give 6.2.2 drivers a try. Thanks
  8. Gigabit LAN PCI-E Express Intel 10/100/1000 CT Desktop Adapter EXPI9301CTBLK
  9. Gigabit LAN PCI-E Express Intel 10/100/1000 CT Desktop Adapter EXPI9301CTBLK
  10. It is the famous gigabit ct one..
  11. Hi Using 1.03b 3615xs loader with onboard NIC and Intel NIC as pci-e. Grub.cfg has correct mac1 and 2. Interfaces set to 2. During boot and installazion both NICs get IP addresses. Installation is running using port1, the onboard NIC.. After installation is finished, everything is fine but the second ethernet port is gone. Onboad is Realtek. 2nd is Intel. Recreated the USB and the NAS successfully migrated again. But still no Intel Any ideas?
  12. kewag

    Max amount of HDD

    Btw, my card is a 6port MZHOU PCIe. Sata cables included. I could live with less speed. Wanted to connect hdds with less importance. Trying the mini pcie. Maybe...
  13. kewag

    Max amount of HDD

    oh..... didn't know that. Kinda sucks. Going to remove the SSD then to get the last needed HDD to work :((((((( Or maybe I'm going to rebuild everything and use another board with additional pcie slots... Damn Thanks for the info
  14. kewag

    Max amount of HDD

    16 also, according to the screenshot
  15. Hi, my working NAS runs 1.04b on a ASRock QC5000 wich has 4port sata + an extra 6port sata-pcie controller I added one more harddrive and it doesn't get recognized. After switching harddrives I found out the system only supports 8 harddrives. What can I do to get more HDD recognized by the 'DS918' on 1.04b.
  16. kewag

    ASUS P8z68-V LX

    Hi IG-88 Going to try it again then with 1.03b and this time with the correct PID/VID. Tried a different Windows PC and voila, PID/VID are different. So, I put the wrong PID/VID in cfg... No wonder then... Thanks for helping out. Would call this as solved.
  17. kewag

    ASUS P8z68-V LX

    Hi, I want to build another custom NAS and are trying to get this running on an ASUS P8z68-V LX (CPU is an I7 2600K and 12GB RAM). It's an old board so doesn't matter if it is a waste using for a "simple" NAS. Tried any bootloaders (EFI/Legacy) but the most I see is the kernel message but nothing else = It doesn't get any IP, so can't be found by the assisstant. I deactivated the onboard NIC which is Realtek (same as the one I use for another XPnolo) and used an INTEL CT PCI-E card, but doen't worked either. I have dectiaveted C1E. Changed EFI to legacy
  18. Just let imager write the new img on my usb-stick and plugged it back in and the system started normally using DSM 5022. Then manual update to 5055 with the pat-file and everything is working fine. Thanks for the new img. Good job.
  19. @Xanthalas: http://www.xpenology.nl/xpenology-software/ Edit: sorry, didnt see the post above
  20. All I can say is, my volumes are gone and don't come back after restarts
  21. Sorry.. weiß nicht. Jetzt ist sie mittlerweile wieder ausgebaut und tut extern ihren Dienst als portable USB-HDD.
  22. Da ich eine 1TB Seagte Hybrid dranhängen habe: Bei mir wird der SSD-Part nicht erkannt. Ein lAufwerk, 1TB, mehr nicht. Board ist AsRock Q5000. Weiß auch nicht, ob der SSD trotzdem genutzt wird... vermutlich nicht... vielleicht aber doch wenn man im BIOS Raid einstellen kann. Kann ich leider nicht.