Hardware: HP Microserver Gen8
Install Type: esxi
Storage: Onboard SATA
i did all the steps in the config tool.
serial is assigned ok.
mac is assign ok.
ip is static and it's ok.
when i reboot the vm i get this error.
what am i doing wrong or what am i missing?
~ XPEnology Boot loader presented by quicknick v2.3 ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
:: START /linuxrc.syno [ OK ]
:: Checking hypervisor [ OK ]
Detected hypervisor: vmware
:: Loading module sata_sil [ OK ]
:: Loading module sata_via [ OK ]
:: Loading module sata_vsc [ OK ]
:: Loading module sata_nv [ OK ]
:: Loading module sata_promise [ OK ]
:: Loading module sata_sx4 [ OK ]
:: Loading module stex [ OK ]
:: Loading module pata_sis [ OK ]
:: Loading module sata_sis [ OK ]
:: Loading module sata_inic162x [ OK ]
:: Loading module sata_qstor [ OK ]
:: Loading module sata_svw [ OK ]
:: Loading module sata_uli [ OK ]
:: Loading module sata_highbank [ OK ]
:: Loading module sg [ OK ]
:: Loading module scsi_transport_spi [ OK ]
:: Loading module mptbase [ OK ]
:: Loading module mptctl [ OK ]
:: Loading module mptscsih [ OK ]
:: Loading module mptsas [ OK ]
:: Loading module mptspi [ OK ]
:: Loading module mpt2sas [ OK ]
:: Loading module mpt3sas [ OK ]
:: Loading module nvme [ OK ]
:: Loading module megaraid_mm [ OK ]
:: Loading module megaraid_mbox [ OK ]
:: Loading module megaraid_sas [ OK ]
:: Loading module megaraid [ OK ]
:: Loading module aacraid [ OK ]
:: Loading module aic94xx [ OK ]
:: Loading module pm80xx [ OK ]
:: Loading module aic79xx [ OK ]
:: Loading module aic7xxx [ OK ]
:: Loading module hpsa [ OK ]
:: Loading module mvsas [ OK ]
:: Loading module 3w-xxxx [ OK ]
:: Loading module 3w-9xxx [ OK ]
:: Loading module 3w-sas [ OK ]
:: Loading module hptiop [ OK ]
:: Loading module BusLogic [ OK ]
:: Loading module qla1280 [ OK ]
:: Loading module isci [ OK ]
:: Loading module gdth [ OK ]
:: Loading module initio [ OK ]
:: Loading module a100u2w [ OK ]
:: Loading module sym53c8xx [ OK ]
:: Loading module ipr [ OK ]
:: Loading module atp870u [ OK ]
:: Loading module mii [ OK ]
:: Loading module mdio [ OK ]
:: Loading module amd8111e [ OK ]
:: Loading module pcnet32 [ OK ]
:: Loading module dca [ OK ]
:: Loading module e100 [ OK ]
:: Loading module e1000 [ OK ]
:: Loading module e1000e [ OK ]
:: Loading module ioatdma [ OK ]
:: Loading module igb [ OK ]
:: Loading module ixgb [ OK ]
:: Loading module ixgbe [ OK ]
:: Loading module forcedeth [ OK ]
:: Loading module uio [ OK ]
:: Loading module ssb [ OK ]
:: Loading module bnx2 [ OK ]
:: Loading module b44 [ OK ]
:: Loading module libphy [ OK ]
:: Loading module broadcom [ OK ]
:: Loading module tg3 [ OK ]
:: Loading module 8139cp [ OK ]
:: Loading module 8139too [ OK ]
:: Loading module r8169 [ OK ]
:: Loading module r8168 [ OK ]
:: Loading module r8101 [ OK ]
:: Loading module via-rhine [ OK ]
:: Loading module crc-ccitt [ OK ]
:: Loading module via-velocity [ OK ]
:: Loading module skge [ OK ]
:: Loading module sky2 [ OK ]
:: Loading module alx [ OK ]
:: Loading module atl1 [ OK ]
:: Loading module atl2 [ OK ]
:: Loading module atl1c [ OK ]
:: Loading module atl1e [ OK ]
:: Loading module jme [ OK ]
:: Loading module sis190 [ OK ]
:: Loading module sis900 [ OK ]
:: Loading module be2net [ OK ]
:: Loading module bna [ OK ]
:: Loading module bnx2x [FAILED]
:: Loading module ipv6 [ OK ]
:: Loading module cnic [ OK ]
:: Loading module cxgb [ OK ]
:: Loading module cxgb3 [ OK [ 9.042815] sd 30:0:0:0: [sdae] Assuming drive cache: write through
]
:: Loading module cxgb4 [ OK ]
:: Loading module mlx4_core [ OK ]
:: Loading module mlx4_en [ OK ]
:: Loading module netxen_nic [ OK ]
:: Loading module qla3xxx [ OK ]
:: Loading module qlcnic [ OK ]
:: Loading module qlge [ OK ]
:: Loading module enic [[ 441849] sd 30:0:0:0: [sdae] Assuming drive cache: write through
BUSY ] [ OK ]
:: Loading module hp100 [ OK ]
:: Loading module 3c59x [ OK ]
:: Loading module typhoon [ OK ]
:: Loading module sc92031 [ OK ]
:: Loading module ptp_pch [ OK ]
:: Loading module pch_gbe [ OK ]
:: Loading module sundance [ BUSY ] 10.111592] sd 30:0:0:0: [sdae] Assuming drive cache: write through
2G[ OK ]
:: Loading module dl2k [ OK ]
:: Loading module veth [ OK ]
:: Loading module 8021q [ OK ]
:: Loading module vmw_pvscsi [ OK ]
:: Loading module vmxnet3 [ OK ]
:: Loading module vmw_vmci [ OK ]
:: Loading module thermal_sys [ OK ]
:: Loading module thermal [ OK ]
:: Loading module button [ OK ]
:: Loading module evdev [ OK ]
:: Loading module usb-common [ OK ]
:: Loading module usbcore [ OK ]
:: Loading module ohci-hcd [ OK ]
:: Loading module uhci-hcd [ OK ]
:: Loading module ehci-hcd [ OK ]
:: Loading module ehci-pci [ BUSY [ 10.953883] md: invalid raid superblock magic on sdaf5
] [ OK ]
:: Loading module xhci-hcd [ OK ]
:: Loading module etxhci-hcd [ OK ]
:: Loading module usbnet [ OK ]
:: Loading module ax88179_178a [ OK ]
:: Loading module asix [ OK ]
:: Loading module r8152 [ OK ]
:: Loading module ipheth [ OK ]
::[ 11679934] md: invalid raid superblock magic on sdag5
Loading module dm9601 [ OK ]
:: Loading module int51x1 [ OK ]
:: Loading module mcs7830 [ OK ]
:: Loading module rtl8150 [ OK ]
:: Loading module smsc75xx [ OK ]
:: Loading module smsc95xx [ OK ]
:: Loading module sierra_net [ OK ]
:: Loading module cx82310_eth 13.519985] md: invalid raid superblock magic on sdah5
72G[ BUSY ] [ OK ]
:: Loading module pegasus [ OK ]
:: Loading module gl620a [ OK ]
:: Loading module plusb [ OK ]
:: Loading module ipg [ OK ]
:: Loading module usbserial [ OK ]
:: Loading module ftdi_sio [ OK ]
:: Loading module pl2303 [ OK[ 15.476127] md: invalid raid superblock magic on sdai5
]
:: Unloading module mpt2sas [ OK ]
:: Loading module mpt2sas [ OK ]
:: Re-scanning disks [ OK ]
:: Checking GRUB boot options [ OK ]
Insert basic USB modules...
Insert net driver(Mindspeed only)...
:: Starting /usr/syno/bin/synocfgen... [ OK ]
/usr/syno/bin/synocfgen returns 0
Partition Version=8
/sbin/e2fsck exists, checking /dev/md0...
32664 inodes used (20.99%, out of 155648)
211 non-contiguous files (0.6%)
26 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 30640/55
274880 blocks used (44.15%, out of 622544)
0 bad blocks
1 large file
26212 regular files
4324 directories
2 character device files
0 block device files
0 fifos
1312 links
2114 symbolic links (1956 fast symbolic links)
3 sockets
------------
33967 files
/sbin/e2fsck returns 0
Mounting /dev/md0 /tmpRoot
------------upgrade
:: Checking upgrade file [ OK ]
============upgrade
Wait 2 seconds for synology manufactory device
Tue Dec 13 08:59:43 UTC 2016
/dev/md0 /tmpRoot ext4 rw,relatime,journal_checksum,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=2013180k,nr_inodes=503295,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno executed successfully.
Post init
sed: /tmpRoot/etc/rc: No such file or directory
sed: /tmpRoot/etc/rc: No such file or directory
sed: /tmpRoot/etc/rc: No such file or directory
sed: /tmpRoot/etc/rc.network: No such file or directory
[ 46.008217] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.038902] init: Caught abort, core dumped
[ 46.040558] init: Error while reading from descriptor: Broken pipe
[ 46.040947] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.054928] init: Caught abort, core dumped
[ 46.057768] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.059041] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.059978] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.060448] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.067143] init: Caught abort, core dumped
[ 46.067144] init: Caught abort, core dumped
[ 46.068965] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.069912] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.082815] init: Caught abort, core dumped
[ 46.082861] init: Caught abort, core dumped
[ 46.084380] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.087450] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.113266] init: Caught abort, core dumped
[ 46.113784] init: Caught abort, core dumped
[ 46.116067] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.116676] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.128159] init: Caught abort, core dumped
[ 46.130087] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.130493] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.137414] init: Caught abort, core dumped
[ 46.139999] init: Caught abort, core dumped
[ 46.140267] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.155832] init: Caught abort, core dumped
[ 46.155873] init: Caught abort, core dumped
[ 46.157162] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.157709] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.168438] init: Caught abort, core dumped
[ 46.170886] init: Caught abort, core dumped
[ 46.172444] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.179925] init: Caught abort, core dumped
[ 46.181285] init: Caught abort, core dumped
[ 46.181359] init: Caught abort, core dumped
[ 46.183802] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.184359] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.197273] init: Caught abort, core dumped
[ 46.199391] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.200825] init: Caught abort, core dumped
[ 46.205605] init: Caught abort, core dumped
[ 46.207291] init: error.c:219: Assertion failed in _nih_error_raem: errno > 0
[ 46.845910] init: Caught abort, core dumped
[ 46.847710] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.863708] init: Caught abort, core dumped
[ 46.866385] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.873889] init: Caught abort, core dumped
[ 46.875732] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.885805] init: Caught abort, core dumped
[ 46.888000] init: error.c:219: Assertion failed in _nih_error_raise_system: errno > 0
[ 46.896161] init: Caught abort, core dumped
when i load the Config Tool this is what i get:
:: START /linuxrc.syno [ OK ]
:: Checking hypervisor [ OK ]
Detected hypervisor: vmware
:: Loading module sata_sil [ OK ]
:: Loading module sata_via [ OK ]
:: Loading module sata_vsc [ OK ]
:: Loading module sata_nv [ OK ]
:: Loading module sata_promise [ OK ]
:: Loading module sata_sx4 [ OK ]
:: Loading module stex [ OK ]
:: Loading module pata_sis [ OK ]
:: Loading module sata_sis [ OK ]
:: Loading module sata_inic162x [ OK ]
:: Loading module sata_qstor [ OK ]
:: Loading module sata_svw [ OK ]
:: Loading module sata_uli [ OK ]
:: Loading module sata_highbank [ OK ]
:: Loading module sg [ OK ]
:: Loading module scsi_transport_spi [ OK ]
:: Loading module mptbase [ OK ]
:: Loading module mptctl [ OK ]
:: Loading module mptscsih [ OK ]
:: Loading module mptsas [ OK ]
:: Loading module mptspi [ OK ]
:: Loading module mpt2sas [ OK ]
:: Loading module mpt3sas [ OK ]
:: Loading module nvme [ OK ]
:: Loading module megaraid_mm [ OK ]
:: Loading module megaraid_mbox [ OK ]
:: Loading module megaraid_sas [ OK ]
:: Loading module megaraid [ OK ]
:: Loading module aacraid [ OK ]
:: Loading module aic94xx [ OK ]
:: Loading module pm80xx [ OK ]
:: Loading module aic79xx [ OK ]
:: Loading module aic7xxx [ OK ]
:: Loading module hpsa [ OK ]
:: Loading module mvsas [ OK ]
:: Loading module 3w-xxxx [ OK ]
:: Loading module 3w-9xxx [ OK ]
:: Loading module 3w-sas [ OK ]
:: Loading module hptiop [ OK ]
:: Loading module BusLogic [ OK ]
:: Loading module qla1280 [ OK ]
:: Loading module isci [ OK ]
:: Loading module gdth [ OK ]
:: Loading module initio [ OK ]
:: Loading module a100u2w [ OK ]
:: Loading module sym53c8xx [ OK ]
:: Loading module ipr [ OK ]
:: Loading module atp870u [ OK ]
:: Loading module mii [ OK ]
:: Loading module mdio [ OK ]
:: Loading module amd8111e [ OK ]
:: Loading module pcnet32 [ OK ]
:: Loading module dca [ OK ]
:: Loading module e100 [ OK ]
:: Loading module e1000 [ OK ]
:: Loading module e1000e [ OK ]
:: Loading module ioatdma [ OK ]
:: Loading module igb [ OK ]
:: Loading module ixgb [ OK ]
:: Loading module ixgbe [ OK ]
:: Loading module forcedeth [ OK ]
:: Loading module uio [ OK ]
:: Loading module ssb [ OK ]
:: Loading module bnx2 [ OK ]
:: Loading module b44 [ OK ]
:: Loading module libphy [ OK ]
:: Loading module broadcom [ OK ]
:: Loading module tg3 [ OK ]
:: Loading module 8139cp [ OK ]
:: Loading module 8139too [ OK ]
:: Loading module r8169 [ OK ]
:: Loading module r8168 [ OK ]
:: Loading module r8101 [ OK ]
:: Loading module via-rhine [ OK ]
:: Loading module crc-ccitt [ OK ]
:: Loading module via-velocity [ OK ]
:: Loading module skge [ OK ]
:: Loading module sky2 [ OK ]
:: Loading module alx [ OK ]
:: Loading module atl1 [ OK ]
:: Loading module atl2 [ OK ]
:: Loading module atl1c [ OK ]
:: Loading module atl1e [ OK ]
:: Loading module jme [ OK ]
:: Loading module sis190 [ OK ]
:: Loading module sis900 [ OK ]
:: Loading module be2net [ OK ]
:: Loading module bna [ OK ]
:: Loading module bnx2x [FAILED]
:: Loading module ipv6 [ OK ]
:: Loading module cnic [ OK ]
:: Loading module cxgb [ OK ]
:: Loading module cxgb3 [ OK ]
:: Loading module cxgb4 [ OK ]
:: Loading module mlx4_core [ OK ]
:: Loading module mlx4_en [ OK ]
:: Loading module netxen_nic [ OK ]
:: Loading module qla3xxx [ OK ]
:: Loading module qlcnic [ OK ]
:: Loading module qlge [ OK ]
:: Loading module enic [ OK ]
:: Loading module hp100 [ OK ]
:: Loading module 3c59x [ OK ]
:: Loading module typhoon [ OK ]
:: Loading module sc92031 [ OK ]
:: Loading module ptp_pch [ OK ]
:: Loading module pch_gbe [ OK ]
:: Loading module sundance [ OK ]
:: Loading module dl2k [ OK ]
:: Loading module veth [ OK ]
:: Loading module 8021q [ OK ]
:: Loading module vmw_pvscsi [ OK ]
:: Loading module vmxnet3 [ OK ]
:: Loading module vmw_vmci [ OK ]
:: Loading module thermal_sys [ OK ]
:: Loading module thermal [ OK ]
:: Loading module button [ OK ]
:: Loading module evdev [ OK ]
:: Loading module usb-common [ OK ]
:: Loading module usbcore [ OK ]
:: Loading module ohci-hcd [ OK ]
:: Loading module uhci-hcd [ OK ]
:: Loading module ehci-hcd [ OK ]
:: Loading module ehci-pci [ OK ]
:: Loading module xhci-hcd [ OK ]
:: Loading module etxhci-hcd [ OK ]
:: Loading module usbnet [ OK ]
:: Loading module ax88179_178a [ OK ]
:: Loading module asix [ OK ]
:: Loading module r8152 [ OK ]
:: Loading module ipheth [ OK ]
:: Loading module dm9601 [ OK ]
:: Loading module int51x1 [ OK ]
:: Loading module mcs7830 [ OK ]
:: Loading module rtl8150 [ OK ]
:: Loading module smsc75xx [ OK ]
:: Loading module smsc95xx [ OK ]
:: Loading module sierra_net [ OK ]
:: Loading module cx82310_eth [ OK ]
:: Loading module pegasus [ OK ]
:: Loading module gl620a [ OK ]
:: Loading module plusb [ OK ]
:: Loading module ipg [ OK ]
:: Loading module usbserial [ OK ]
:: Loading module ftdi_sio [ OK ]
:: Loading module pl2303 [ OK ]
:: Unloading module mpt2sas [ OK ]
:: Loading module mpt2sas [ OK ]
:: Re-scanning disks [ OK ]
:: Checking GRUB boot options [ OK ]
+ exec
Insert basic USB modules...
Insert net driver(Mindspeed only)...
:: Starting /usr/syno/bin/synocfgen... [ OK ]
/usr/syno/bin/synocfgen returns 0
Exit on error [1] Loading XPEnology Configuration Tool...
Tue Dec 13 09:16:06 UTC 2016
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=2013176k,nr_inodes=503294,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 1
starting pid 7943, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs [ OK ]
:: Mounting tmpfs [ OK ]
:: Mounting devtmpfs [ OK ]
:: Mounting devpts [ OK ]
:: Mounting sysfs [ OK ]
rc: Use all internal disk as swap.
/etc/rc: /etc/rc: line 107: line 107: awk: not found/usr/syno/bin/synodiskpathparse: not found
rc: Failed to parse partition sdaf2
:: Loading module llc [ OK ]
:: Loading module p8022 [ OK ]
:: Loading module psnap [ OK ]
:: Loading module quota_tree [ OK ]
:: Loading module quota_v2 [ OK ]
:: Loading module crc-itu-t [ OK ]
:: Loading module dm-snapshot [ OK ]
:: Loading module freq_table [ OK ]
:: Loading module cpufreq_stats [ OK ]
:: Loading module processor [ OK ]
:: Loading module mperf [ OK ]
:: Loading module acpi-cpufreq [FAILED]
:: Loading module cpufreq_ondemand [ OK ]
:: Loading module cpufreq_performance [ OK ]
:: Loading module cpufreq_powersave [ OK ]
:: Loading module cpufreq_conservative [ OK ]
:: Loading module cbc [ OK ]
:: Loading module md5 [ OK ]
:: Loading module cts [ OK ]
:: Loading module ansi_cprng [ OK ]
:: Loading module des_generic [ OK ]
:: Loading module rng-core [ OK ]
:: Loading module authenc [ OK ]
:: Loading module aes-x86_64 [ OK ]
:: Loading module ecb [ OK ]
:: Loading module sha1_generic [ OK ]
:: Loading module sha256_generic [ OK ]
:: Loading module sha512_generic [ OK ]
:: Loading module ecryptfs [ OK ]
:: Loading module cryptd [ OK ]
:: Loading module fat [ OK ]
:: Loading module vfat [ OK ]
:: Loading module fuse [ OK ]
:: Loading module i2c-algo-bit [ OK ]
:: Loading module hmac [ OK ]
:: Loading module md4 [ OK ]
:: Loading module hfsplus [ OK ]
:: Loading module libcrc32c [ OK ]
:: Loading module zlib_deflate [ OK ]
mount: open failed, msg:No such file or directory
mount: mounting /dev/bus/usb on /proc/bus/usb failed: No such device
ln: /proc/bus/usb/devices: No such file or directory
:: Loading module synobios [ OK ]
udhcpc (v1.16.1) started
eth0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr:172.16.30.20 Bcast:172.16.30.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:986 (986.0 B) TX bytes:1648 (1.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
:: Starting syslogd [ OK ]
:: Starting scemd
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd -i eth0
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-xxxxxxxxxxx::upnp:rootdevice
(55): Synology/synology_bromolow_3615xs/6.0-8451/172.16.30.20
(45): http://172.16.30.20:5000/description-eth0.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 172.16.30.20 xxxxxxxxxxxx 6.0-8451 synology_bromolow_3615xs eth0
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
:: Loading module oxu210hp-hcd [ OK ]
:: Loading module usb-storage [ OK ]
:: Loading module usblp [ OK ]
:: Loading module hid [ OK ]
:: Loading module usbhid [ OK ]
============ Date ============
Tue Dec 13 09:16:14 UTC 2016
==============================
Starting sshd service ...
sshd service is running with pid 9746
~ XPEnology boot loader presented by quicknick v2.2 ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Today's date is: Tue Dec 13 09:22:18 UTC 2016
Kernel Information: Linux 3.10.77 x86_64
Synology DSM Version: 6.0.2-8451.5
Synology Serial: xxxxxxxxx
Current IP Address: 172.16.30.20
Current MAC Address: xx:xx:xx:xx:xx:xx
Today's root password: xxx-xxxx
Uptime is: 6 min, load average: 0.00, 0.29, 0.22
cat: can't open '/proc/bus/usb/devices': No such file or directory
cat: can't open '/proc/bus/usb/devices': No such file or directory
Error: /dev/md0: unrecognised disk label
Error: /dev/md1: unrecognised disk label
Error: /dev/md0: unrecognised disk label
Error: /dev/md1: unrecognised disk label
Error: /dev/md0: unrecognised disk label
Error: /dev/md1: unrecognised disk label
Error: /dev/md0: unrecognised disk label
Error: /dev/md1: unrecognised disk label