Доброе время суток!
Gоставил XPEnoboot_DS3615xs_5.1-5022.1 x64 на Acer Aspire 5720G. все встало кроме wi-fi и синезуба.
Подскажите как поставить драйвер Intel® PRO/Wireless 3945ABG https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=17045〈=eng&ProdId=2259 на NAS?
изучив форум, наметил очередность:
1. получить рут (sudo или su)
http://www.synology-forum.de/showthread.html?3949-Init_3rdparty-Skript-und-Sammlung-von-3rd-Party-Erweiterungen
3. далее как в инструкции к дрвйверу:
[spoiler=ipw3945-1.2.2 / INSTALL]... First, we build and install the ieee80211 subsystem. You can obtain
the latest ieee80211 subsystem from http://ieee80211.sf.net. We
recommend version 1.1.12 or newer:
% tar xzvf ieee80211-1.2.16.tgz
% cd ieee80211-1.2.16
% make
# make install <--- You may need to be root
% cd ..
If you encounter problems with the above, you may need to install the
ieee80211 sources into your kernel and then build it as part of your
kernel image. See the INSTALL and README.ieee80211 files provided in
the ieee80211 subsystem package for more information.
Once the ieee80211 subsystem is installed, we build the ipw3945.ko module:
% tar xzvf ipw3945-1.2.2.tgz
% cd ipw3945-1.2.2
% make
Now we install the firmware files (first finding where to install them):
% wget http://bughost.org/ipw3945/ucode/ipw394 ... 1.14.2.tgz .
% DIR=$(sed -ne "s:^FIRMWARE_DIR=\([^, ]*\).*:\1:p" \
/etc/hotplug/firmware.agent)
% tar xzvf ipw3945-ucode-1.14.2.tgz
% less ipw3945-ucode-1.14.2/LICENSE.ipw3945-ucode
# cp ipw3945-ucode-1.14.2/ipw3945.ucode $DIR
NOTE: 'DIR' above typically works out to /lib/firmware.
Now we obtain the regulatory daemon:
% wget http://bughost.org/ipw3945/daemon/ipw3945d-1.7.22.tgz .
% tar xzvf ipw3945d-1.7.22.tgz
% less ipw3945d-1.7.22/LICENSE.ipw3945d
Depending on your architecture perform one of the following
For 32-bit systems:
# cp ipw3945d-1.7.22/x86/ipw3945d /sbin
or for 64-bit systems:
# cp ipw3945d-1.7.22/x86_64/ipw3945d /sbin
And now we can try to load the module, first clearing the kernel log:
# ./load debug=0
Finally we can check to see if things worked:
# iwconfig eth1
...
Все ли правильно? Может как-то проще можно?